Networking Setup:Vera WiFi in Client Mode

From MiOS
(Difference between revisions)
Jump to: navigation, search
m
 
(3 intermediate revisions by 3 users not shown)
Line 1: Line 1:
If you already have a wireless network and you want to connect Vera to it, you'll need to set Vera Wi-Fi to Client mode. To do that follow these steps:  
+
[[Category:Incomplete]]
 
+
See the topic: [[WiFiClientMode]]
Step 0. Unplug any cables from the WAN Port
+
Step 1. Open Vera Web Admin page: http://local.findvera.com
+
Step 2. Go to Advanced -> Net&Wi-Fi
+
Step 3. Set:
+
            - Firewall: No Firewall (bridge)
+
            - DHCP Server: Off
+
Step 4. Press Save & Apply Changes
+
Step 5. Go to Advanced -> Net&Wi-Fi -> Advanced Configurations
+
        If you haven't setup any users, login with root (by default there is no password)
+
Step 6. Go to Network -> Wireless
+
Step 7. Wireless Adapter wl0 Configuration
+
        Set Radio to On and Channel to Auto
+
Step 8. Wireless Virtual Adapter Configuration for Wireless Card wl0
+
        Set:
+
              - Mode: Client
+
              - ESSID: (according to your existing wireless network)
+
              - Encryption Type: (according to your existing wireless network)
+
Step 9. Press Save & Apply Changes
+

Latest revision as of 20:46, 17 April 2010

See the topic: WiFiClientMode

Personal tools