Firmware Flash Vera2
From MiOS
(Difference between revisions)
(→Firmware Flash Vera 2) |
|||
| Line 8: | Line 8: | ||
* [http://download1.mios.com/firmware/vera2_upgrade_tool.zip Vera2 Firmware Flash Tool] | * [http://download1.mios.com/firmware/vera2_upgrade_tool.zip Vera2 Firmware Flash Tool] | ||
| − | * [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 | + | * [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 Firmware] |
| − | + | ||
== Setup your computer to connect to Vera 2 == | == Setup your computer to connect to Vera 2 == | ||
| Line 26: | Line 25: | ||
# Click on "*UN*checkPID" radiobox, and click on "EraseNormal" dropdown box. | # Click on "*UN*checkPID" radiobox, and click on "EraseNormal" dropdown box. | ||
# Click the [Files] button. | # Click the [Files] button. | ||
| − | # Download the file: [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 | + | # Download the file: [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 Firmware] and save it on your computer. |
| − | # Select the file [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 | + | # Select the file [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 Firmware] |
# Click the [Open] button to get the file. | # Click the [Open] button to get the file. | ||
# Click on the [OK] button on the BIN File Information dialog box. | # Click on the [OK] button on the BIN File Information dialog box. | ||
# Click on the [Upgrade] button. File will be flashed, and you will see a dialog box saying success - close Upgrade Tool. | # Click on the [Upgrade] button. File will be flashed, and you will see a dialog box saying success - close Upgrade Tool. | ||
| − | # | + | # Put your computer's IP back to DHCP (Automatically Configure) and Vera will assign an IP like 192.168.81.xxx |
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
| − | + | ||
# Wait about 10 mins for your new system to reboot and the ETH1 light start double blinking or it's solid. | # Wait about 10 mins for your new system to reboot and the ETH1 light start double blinking or it's solid. | ||
| − | # When you see the ETH1 double blinking | + | # When you see the ETH1 double blinking, you are done. |
| + | |||
| + | == To do after the restoration has finished == | ||
| + | |||
| + | * If you have only your computer connected to the ETH2 port of Vera, open http://192.168.81.1 and you will see the Wizard to continue setup your Vera. | ||
| + | * If you already connected the ETH1 (Wan) cable coming from your main Router/ADSL modem, the ETH1 light on front will go solid, meaning Vera is connected to the internet. | ||
Revision as of 17:19, 30 July 2010
Contents |
Requirements
- This Upgrade tool is know to be working on Windows XP (or other version with tftp command built in).
- Make sure you have only one network interface (card) installed. If you have a wireless card as well, please disable it before proceeding.
- Please deactivate all Firewall and Antivirus software which is running during the upgrade process.
Files to download before you start the restoration process
Setup your computer to connect to Vera 2
- IP: 192.168.1.5
- Subnet Mask: 255.255.255.0
- Default Gateway: 192.168.1.1
Begin the process for flashing the firmware
- Plug PC into Vera ETH2.
- Holding down Vera's reset button, turn Vera on. When releasing power button, power LED should be blinking.
- Start Vera2 Firmware Flash Tool.
- Click "Browse target" button.
- Vera should appear in targets list.
- Click on "*UN*checkPID" radiobox, and click on "EraseNormal" dropdown box.
- Click the [Files] button.
- Download the file: Vera2 Firmware and save it on your computer.
- Select the file Vera2 Firmware
- Click the [Open] button to get the file.
- Click on the [OK] button on the BIN File Information dialog box.
- Click on the [Upgrade] button. File will be flashed, and you will see a dialog box saying success - close Upgrade Tool.
- Put your computer's IP back to DHCP (Automatically Configure) and Vera will assign an IP like 192.168.81.xxx
- Wait about 10 mins for your new system to reboot and the ETH1 light start double blinking or it's solid.
- When you see the ETH1 double blinking, you are done.
To do after the restoration has finished
- If you have only your computer connected to the ETH2 port of Vera, open http://192.168.81.1 and you will see the Wizard to continue setup your Vera.
- If you already connected the ETH1 (Wan) cable coming from your main Router/ADSL modem, the ETH1 light on front will go solid, meaning Vera is connected to the internet.
