Firmware Flash Vera2
From MiOS
(Difference between revisions)
(→Firmware Flash Vera 2) |
(→Firmware Flash Vera 2) |
||
| Line 1: | Line 1: | ||
| − | = | + | == Requirements == |
| − | + | * This Upgrade tool is know to be working on Windows XP (or other version with tftp command built in). | |
| + | * Make sure you have only one network interface (card) installed. If you have a wireless card as well, please disable it before proceeding. | ||
| + | * Please deactivate all Firewall and Antivirus software which is running during the upgrade process. | ||
| − | + | == Files to download before you start the restoration process == | |
| − | + | ||
| − | + | ||
| − | + | * [http://download1.mios.com/firmware/vera2_upgrade_tool.zip Vera2 Firmware Flash Tool] | |
| + | * [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 Intermediate Firmware] | ||
| + | * Latest .trx file from [http://forum.micasaverde.com/index.php?board=4.0 Official Announcements on our forum] | ||
| − | + | == Setup your computer to connect to Vera 2 == | |
| − | + | ||
| − | + | ||
| − | Plug PC into Vera ETH2. | + | * IP: 192.168.1.5 |
| − | Holding down Vera's reset button, turn Vera on. When releasing power button, power LED should be blinking. | + | * Subnet Mask: 255.255.255.0 |
| − | Start [vera2_upgrade_tool.zip]. | + | * Default Gateway: 192.168.1.1 |
| − | Click "Browse target" button. | + | |
| − | Vera should appear in targets list. | + | == Begin the process for flashing the firmware == |
| − | Click on "*UN*checkPID" radiobox, and click on "EraseNormal" dropdown box. | + | |
| − | Click the [Files] button. | + | # Plug PC into Vera ETH2. |
| − | Download the file: [micasaverde_backfire_v8.bin] and save it on your computer. | + | # Holding down Vera's reset button, turn Vera on. When releasing power button, power LED should be blinking. |
| − | Select the file [micasaverde_backfire_v8.bin] | + | # Start [http://download1.mios.com/firmware/vera2_upgrade_tool.zip Vera2 Firmware Flash Tool]. |
| − | Click the [Open] button to get the file. | + | # Click "Browse target" button. |
| − | Click on the [OK] button on the BIN File Information dialog box. | + | # Vera should appear in targets list. |
| − | Click on the [Upgrade] button. File will be flashed, and you will see a dialog box saying success - close Upgrade Tool. | + | # Click on "*UN*checkPID" radiobox, and click on "EraseNormal" dropdown box. |
| − | Download the latest firmware ( .trx file ) from here: [http://forum.micasaverde.com/index.php?board=4.0] and save it to your computer. | + | # Click the [Files] button. |
| − | Open browser to 192.168.1.1. | + | # Download the file: [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 Intermediate Firmware] and save it on your computer. |
| − | At the authentication dialog, enter password "admin" and no user name. | + | # Select the file [http://download1.mios.com/firmware/micasaverde_backfire_v8.bin Vera2 Intermediate Firmware] |
| − | At the MiCasVerde.com branded page, it reads "Please upgrade to the latest firmware." Browse for the .trx file which you saved on your computer, click on the [Open] button, click on the [Upload new firmware] button. | + | # Click the [Open] button to get the file. |
| − | Browser goes to next page automatically, reading "Upgrade complete. Rebooting..." - click on the [Continue] button. | + | # Click on the [OK] button on the BIN File Information dialog box. |
| − | Browser goes to next page "http://192.168.1.1/firmware.asp", but the Vera is rebooting, ignore the web page. | + | # Click on the [Upgrade] button. File will be flashed, and you will see a dialog box saying success - close Upgrade Tool. |
| − | Wait about 10 mins for your new system to reboot and the ETH1 light start double blinking or it's solid. | + | # Download the latest firmware ( .trx file ) from here: [http://forum.micasaverde.com/index.php?board=4.0 Official Announcements on our forum] and save it to your computer. |
| − | When you see the ETH1 double blinking or it's solid, you are done. | + | # Open browser to 192.168.1.1. |
| + | # At the authentication dialog, enter password "admin" and no user name. | ||
| + | # At the MiCasVerde.com branded page, it reads "Please upgrade to the latest firmware." Browse for the .trx file which you saved on your computer, click on the [Open] button, click on the [Upload new firmware] button. | ||
| + | # Browser goes to next page automatically, reading "Upgrade complete. Rebooting..." - click on the [Continue] button. | ||
| + | # Browser goes to next page "http://192.168.1.1/firmware.asp", but the Vera is rebooting, ignore the web page. | ||
| + | # Wait about 10 mins for your new system to reboot and the ETH1 light start double blinking or it's solid. | ||
| + | # When you see the ETH1 double blinking or it's solid, you are done. | ||
Revision as of 16:56, 30 July 2010
Contents |
Requirements
- This Upgrade tool is know to be working on Windows XP (or other version with tftp command built in).
- Make sure you have only one network interface (card) installed. If you have a wireless card as well, please disable it before proceeding.
- Please deactivate all Firewall and Antivirus software which is running during the upgrade process.
Files to download before you start the restoration process
- Vera2 Firmware Flash Tool
- Vera2 Intermediate Firmware
- Latest .trx file from Official Announcements on our forum
Setup your computer to connect to Vera 2
- IP: 192.168.1.5
- Subnet Mask: 255.255.255.0
- Default Gateway: 192.168.1.1
Begin the process for flashing the firmware
- Plug PC into Vera ETH2.
- Holding down Vera's reset button, turn Vera on. When releasing power button, power LED should be blinking.
- Start Vera2 Firmware Flash Tool.
- Click "Browse target" button.
- Vera should appear in targets list.
- Click on "*UN*checkPID" radiobox, and click on "EraseNormal" dropdown box.
- Click the [Files] button.
- Download the file: Vera2 Intermediate Firmware and save it on your computer.
- Select the file Vera2 Intermediate Firmware
- Click the [Open] button to get the file.
- Click on the [OK] button on the BIN File Information dialog box.
- Click on the [Upgrade] button. File will be flashed, and you will see a dialog box saying success - close Upgrade Tool.
- Download the latest firmware ( .trx file ) from here: Official Announcements on our forum and save it to your computer.
- Open browser to 192.168.1.1.
- At the authentication dialog, enter password "admin" and no user name.
- At the MiCasVerde.com branded page, it reads "Please upgrade to the latest firmware." Browse for the .trx file which you saved on your computer, click on the [Open] button, click on the [Upload new firmware] button.
- Browser goes to next page automatically, reading "Upgrade complete. Rebooting..." - click on the [Continue] button.
- Browser goes to next page "http://192.168.1.1/firmware.asp", but the Vera is rebooting, ignore the web page.
- Wait about 10 mins for your new system to reboot and the ETH1 light start double blinking or it's solid.
- When you see the ETH1 double blinking or it's solid, you are done.
