ZWave Debugging

From MiOS
(Difference between revisions)
Jump to: navigation, search
(New page: Here are some hints on debugging ZWave protocol issues. First, check the box "verbose logs" under Advanced, Logging, or, from a console comment out the LogLevels in /etc/cmh.conf and run ...)

Revision as of 20:26, 23 January 2009

Here are some hints on debugging ZWave protocol issues. First, check the box "verbose logs" under Advanced, Logging, or, from a console comment out the LogLevels in /etc/cmh.conf and run /usr/bin/VerboseLogging.sh enable. Next, if you want to turn off automatic polling, temporarily for this session so the logs aren't cluttered with polling traffic, do: /usr/bin/MessageSend localhost 0 9 1 966 5 0 (assuming the ZWave device is #9, as default).

Next you can send "COMMAND: #191 - Send Code" to either a ZWave Node and the parameter 9 (Text) is a command, or send it to the zwave device and it is a frame. The contents of text are a string of hex or decimal numbers separated with spaces dashes or underscores, and hex values are preceded with 0x or x. So assuming a dimmable light is device 20 is node 15, either command below will dim it to 50%:

/usr/bin/MessageSend localhost 0 9 1 191 9 "0 x13 15 0x3 0x26 0x1 50 4 1" #send data to node 15 command class 0x26 command 0x1 (set multi level) to 10% (size=3) with transmit options=4 and funcid=1

/usr/bin/MessageSend localhost 0 20 1 191 9 "x26 x1 50"

Personal tools