Supported Hardware

From MiOS
Revision as of 00:27, 19 December 2008 by Wseverino (Talk | contribs)

Jump to: navigation, search

This will have a list of supported hardware. For now, refer to the MiCasaVerde Shop

Contents

Hardware Reported to Work

  • We strongly encourage users to list any and all products they tested and installed.
  • If a product works but you did not like it, please list it anyway. It may be the only product available to some users.



IMPORTANT! The devices listed here have been added by installers,technicians and users like yourself. Results may vary upon installations. MiCasaVerde does not guarantee operation and compatibility with your installation. The listed devices were found to work with their specific installation. Mixing different series and brands of equipment is not guaranteed in any way to work with other series and brands. It is very likely that users have not fully tested all features of the devices, so it is possible that a device listed here as compatible, will not prove compatible with your hardware. If you are editing this wiki DO NOT REMOVE a listed working device if it hasn't worked for you. Seek help to get the device to work under your individual circumstance. If you are adding to this wiki, please provide links to data for the device and add any tips you feel may benefit someone wanting to implement the device into an installation



Lighting Devices

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Added by User Notes
Leviton Dimmer Switch VRM10-1LX 1 Nov 2008 Indoor Link Link mark-hc This is a high quality dimmer geared towards high-end installations
Intermatic 3-way Dimmer Switch HA20 Nov 2008 Indoor Link Link Affordable 3-way 600W dimmer
ACT 2-way Dimmer Switch ZDW120 Nov 2008 Indoor Link Link WSeverino Works well, easy to install, LED is a very bright blue....can be programmed to be off when the light is off or on.
ACT 3-way Dimmer Switch ZDW103 Nov 2008 Indoor Link Link WSeverino Works well, can be tricky to install due to the different combination of 3 way circuits, LED is a very bright blue....can be programmed to be off when the light is off or on.

Plug & Receptacle Devices

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Notes
Intermatic In-Wall Receptacle CA3500 1 Nov 2008 Indoor Link Link This is a decent, but expensive solution for in-wall receptacles
Intermatic Appliance Module HA02 1 Nov 2008 Indoor Link Link Seems to work well
ACT In-Wall Receptacle ZRR150W 2.2 Nov 2008 Indoor Link Link Works like a champ! Easy to Install

Thermostat Devices

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Notes
Wayne Dalton Wall Stat WDTC-20  ?? Nov 2008 Indoor !! Link Link Shows up as Standard Thermostat, shows room temp, as well as controlling HVAC


Sensors

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Notes
ACT Motion Sensor PIR000 / PIR010 Indoor Remove the cover, pair to Vera's dongle by using the push-button on the left of the circuit board. Vera must configure it to work, and it can only be configured within a few minutes of inserting the batteries. With Vera's dongle removed, remove/reinsert the batteries, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page
Express Controls 3-in-1 sensor Pair using the blue button. The sensor will accept configuration within a few minutes of pressing the blue button, whether or not you are actually pairing or just pushing the button. So, with Vera's dongle removed, pair it or press the blue button if it's already paired, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page. This will show up as a device with 3 embedded devices (motion sensor, light sensor, thermometer)
EverSpring/Hawking/Home Managemeables Door/window sensor Pair using the intrusion button. The sensor will accept configuration within a few minutes of the initial pairing, or of pressing the intrusion button on the back even after it's paired. Pair the device, or if it's already paired, press the intrusion button, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page

Controller/Gateway

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Notes
Wayne Dalton Gateway WDHA-12R  ?? Nov 2008 Indoor Link Link Shows as Z-Wave controller, a pain to sync with Homelink car remote, able to associate with devices, but not through Vera yet. Can now turn on/off All Z-wave devices from car. This gateway is required for the 3-button remote sold by them. Translates commands to Z-Wave Scenes.




Personal tools