Supported Hardware

From MiOS
(Difference between revisions)
Jump to: navigation, search
(Window Coverings)
(Window Coverings)
Line 452: Line 452:
 
|    
 
|    
 
| Ap15e  
 
| Ap15e  
| Open/Close buttons work well, but slide bar does not work. Device does not work with Luup release 1.0.843. Workaround: Use a Luup Scene with the following code:<P> local lul_arguments = {}<P>
+
| Open/Close buttons work well, but slide bar does not work. Device does not work with Luup release 1.0.843. Workaround: Use a Luup Scene with the following code:<P>local lul_arguments = {}<P>
 
  lul_arguments["newTargetValue"]="0"<P>
 
  lul_arguments["newTargetValue"]="0"<P>
 
  lul_resultcode,lul_resultstring,lul_job,lul_returnarguments = luup.call_action("urn:upnp-org:serviceId:SwitchPower1","SetTarget",lul_arguments,6)<P>Replace "6" with your device number, replace "0" with "1" for inverse action.
 
  lul_resultcode,lul_resultstring,lul_job,lul_returnarguments = luup.call_action("urn:upnp-org:serviceId:SwitchPower1","SetTarget",lul_arguments,6)<P>Replace "6" with your device number, replace "0" with "1" for inverse action.

Revision as of 14:55, 15 August 2009

Note: There is a separate page for Z-Wave Handheld remote controls, Z-Wave gateways, and Z-Wave Scene Controllers: click here.  There is also a separate page for IP cameras: click here

In general, any device with the Z-Wave logo should work with Vera. A list of tested Z-Wave devices is below, with specific notes for each type of device. This is a wiki, so feel free to add to the page.

Contents

Hardware Reported to Work

  • We strongly encourage users to list any and all products they tested and installed.
  • If a product works but you did not like it, please list it anyway. It may be the only product available to some users.



IMPORTANT! The devices listed here have been added by installers, technicians and users like yourself. Results may vary upon installations. MiCasaVerde does not guarantee operation and compatibility with your installation. The listed devices were found to work with their specific installation. Mixing different series and brands of equipment is not guaranteed in any way to work with other series and brands. It is very likely that users have not fully tested all features of the devices, so it is possible that a device listed here as compatible, will not prove compatible with your hardware. If you are editing this wiki DO NOT REMOVE a listed working device if it hasn't worked for you. Seek help to get the device to work under your individual circumstance. If you are adding to this wiki, please provide links to data for the device and add any tips you feel may benefit someone wanting to implement the device into an installation.



Lighting Devices

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Added by User Notes
Leviton Dimmer Switch VRM10-1LX 1 Nov 2008 Indoor Link Link mark-hc This is a high quality dimmer geared towards high-end installations
Intermatic 300 watt dimmer HA06 July 2007 Indoor Link Affordable Dimmer Switch. incandescent/halogen only. Loads for 300 watts or less no neutral required. Great for dimming one bulb.
Intermatic 3-way Switch HA18 Dec 2008 Indoor Link Kozanator Affordable 3-way Switch
Intermatic 3-way Dimmer Switch HA20 Nov 2008 Indoor Link Link Affordable 3-way 600W dimmer
ACT 2-way Dimmer Switch ZDW120 Nov 2008 Indoor Link Link WSeverino Works well, easy to install, LED is a very bright blue....can be programmed to be off when the light is off or on.
ACT 3-way Dimmer Switch ZDW103 Nov 2008 Indoor Link Link WSeverino Works well, can be tricky to install due to the different combination of 3 way circuits, LED is a very bright blue....can be programmed to be off when the light is off or on.
ACT 2-way Relay Switch ZRW113 Nov 2008 Indoor Link Link WSeverino Controls Florescent Lamps very well! No humming at all.
ACT Companion Switch AS101 Nov 2008 Indoor Link Link WSeverino Works well, can be tricky to install due to the different combination of 3 way circuits, The trick here is to install this device where the power comes in.
Intermatic Screw-in Module HA05C Nov 2008 Outdoor Link Link WSeverino Easy install, easy to pair with Vera!
Merten Radio sensor cover for dimmer inserts 5026xx, 5036xx, 5046xx 6,2,7,1,5 Apr 2009 Indoor Link   Ap15e Works well
Merten Single Radio flush-mounted receiver 507001 6,2,27,2,2 Apr 2009 Indoor Link   Ap15e Works well


Plug & Receptacle Devices

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Added by User Notes
Intermatic In-Wall Receptacle CA3500 1 Nov 2008 Indoor Link Link This is a decent, but expensive solution for in-wall receptacles
Intermatic Appliance Module HA02C 1 Nov 2008 Indoor Link Link Seems to work well
ACT In-Wall Receptacle ZRR150W 2.2 Nov 2008 Indoor Link Link Works like a champ! Easy to Install
Intermatic Outdoor Module HA04C 1 Dec 2008 Outdoor Link Link Kozanator Easy to Install.

Thermostat Devices

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Notes
Wayne Dalton Wall Stat WDTC-20  ?? Nov 2008 Indoor Link Link Has 2 inclusion modes: 1) press and release the bind button and the STAT will be included as a thermostat and works with Vera, 2) press and hold the bind button and it will be added as a binary switch for compatibility with old, non-compliant remotes. If it's added in the wrong mode, remove it and re-add it. Works great simple to use!
HAI Wall Stat RC-80BZ  ?? Nov 2007 Indoor Link Link Shows up as Standard Thermostat in Vera, Hold button feature not able to control by Vera at this time. Priced above 200.00. Has internal setback programs. Works great.
RCS Wall Stat TZ43  ?? Nov 2008 Indoor Link Link Shows up as Standard Thermostat in Vera, much more feature rich the the WDTC-20 but comes with a hefty price tag ($214.95). Wish Vera could use all the features in this Thermostat! Note:You need to set the thermostat to show the temperature, on its display, in Celsius degree in order to be able to receive "Set Temp" commands from Vera
Intermatic InTouch CA8900 Nov 2008 Indoor Link Looks very similar to the Wayne Dalton WDTC-20 listed here. works great, simple to use
Danfoss Radiator thermostat RA PLUS-w Indoor See: Danfoss Thermostat for installation instructions

Sensors

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Added by User Notes
ACT Motion Sensor PIR000 / PIR010 Indoor Remove the cover, pair to Vera's dongle by using the push-button on the left of the circuit board. Vera must configure it to work, and it can only be configured within a few minutes of inserting the batteries. With Vera's dongle removed, remove/reinsert the batteries, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page
Express Controls aka HomeSeer 3-in-1 sensor (light/temperature/motion) See ExpressControls3in1
EverSpring/Hawking/Home Manageables Door/window sensor SM103 6,2,9,1,0 Apr 2009 Indoor Link Link   Ap15e Pair using the intrusion button. The sensor will accept configuration within a few minutes of the initial pairing, or of pressing the intrusion button on the back even after it's paired. Pair the device, or if it's already paired, press the intrusion button, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page. NOTE: There is some confusion about the orientation of the sensor. The main sensor body has a back (where the intrusion is), a front (where the logo and LED is), and the 2 other surfaces, one of which has a curved edge, and the other is flat. The magnet needs to go against the flat surface. And the flat surface on the magnet should be as close as possible to the flat surface on the sensor, lined up in the middle so the line which passes through the LED lines up with the sensor.
Everspring Motion Detector SP103 6,2,9,1,0 Apr 2009 Indoor Link Link   Ap15e Works well
Fortrezz Water /Freeze WWA-01  ?????? Apr 2009 Indoor Link Link Zmistro Works great I would place a few in your house. Bathrooms, laundry , kitchen , basement. Great product!

Door Locks

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Notes
Schlage Door lock and deadbolt Indoor Read the instructions here: Schlage Lock

Drapes/Blinds

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Notes
Electronic Solutions Drape/Blind motor DBMZ Indoor Link

Relay controls

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Notes
Intermatic Contactor control box CA3750 Nov 2007 Indoor/Outdoor Link Multi-instance class supported for this device. Vera is able to control each of the 2 relays independently if desired. please note unit shows as three switches this is a bug with Intermatic not a real issue.You can check the box in devices to not show the second listing of the first relay in "Dasboard" You can control heavy loads like a water heater ,pool pump motor/s. great device

Window Coverings

Manufacturer Device Type Model no. Version Date Purchased Location (indoor/outdoor) Specs Product Review Added by User Notes
Merten Radio roller shutter push-button 5025xx, 5035xx, 5045xx 6,2,27,2,3 and 6,2,27,2,4 Apr 2009 Indoor Link   Ap15e Open/Close buttons work well, but slide bar does not work. Device does not work with Luup release 1.0.843. Workaround: Use a Luup Scene with the following code:

local lul_arguments = {}<P>

lul_arguments["newTargetValue"]="0"<P>
lul_resultcode,lul_resultstring,lul_job,lul_returnarguments = luup.call_action("urn:upnp-org:serviceId:SwitchPower1","SetTarget",lul_arguments,6)<P>Replace "6" with your device number, replace "0" with "1" for inverse action.
Duewi Radio roller shutter push-button 054368 6,2,51,1,0 Jun 2009 Indoor Link   Lutz Open/Close buttons work well, but slide bar does not work.

Personal tools