Release Notes

From MiOS
Revision as of 20:14, 8 November 2008 by Micasaverde (Talk | contribs)

Jump to: navigation, search

1.0.2xx - November 8, 2008

Known Issues

1. When you manually add an IP camera you can't set the camera's settings at the same time. Add the camera. Click 'save'. Then hit f5 to reload the site, go to devices, and then put in the settings (user/pass/ip/mac/etc.).

2. The iPhone interface does not show the current status of devices and may display a popup message 'failure' even when it successfully controlled a device. When you save your login settings at findvera.com/iphone you may see a database error when you return to the page.

3. Adding secondary and limited access users isn't working

Fixes

1. [Bug 168]: Instructions were added for using Vera as a wi-fi client: http://wiki.micasaverde.com/index.php/Networking_Setup:Vera_WiFi_in_Client_Mode

2. [Bug 129]: Notifications are now sent if Vera goes down.

3. [Bug 191]: You can now add a secondary controller.

4. [Bug 223]: Added ability on log page to turn on/off verbose logging

5. [Bug 138]: Added user friendly messages for energy history when there's no data.

6. [Bug 183]: Floorplan editor doesn't show room name

7. [Bug 211]: Intermittent problems activating the findvera.com service

8. [Bug 212]: Resolve a cache issue where IP/MAC was disappearing

9. [Bug 213]: Force cache reload after firmware upgrade

10. [Bug 214]: Fix allowing limited access to certain users

11. [Bug 177]: Fix 'require local authorization' check box

12. [Bug 202]: Fix cache issues with IE7 causing device changes to get lost

13. [Bug 210]: Reserve IP addresses if Vera is the DHCP server

14. [Bug 217]: Notify the user to cycle power if, after a firmware upgrade, it doesn't come back alive

15. [Bug 215]: Fix the cache setting

16. [Bug 204]: Fix login on findvera.com for iphone and wap phone if storing username in a cookie

17. [Bug 180]: FindVera.com Energy page shows "JpGraph Error" when no data is available

18. [Bug 66]: View cameras in a popup window

19. [Bug 166]: View cameras window kept closing

20. [Bug 153]: Fix tech support remote assistance

21. [Bug 101]: Fix java script error causing the 'after x seconds' popup to not appear

22. [Bug 150]: Fix order of timing in google chrome


1.0.283 - October 31, 2008

Known Issues

1. The iPhone interface does not show the current status of devices and may display a popup message 'failure' even when it successfully controlled a device. When you save your login settings at findvera.com/iphone you may see a database error when you return to the page.

Fixes

1. The iPhone app now lets you navigate forward and backward and displays buttons rather than links for scenes and devices.

2. [Bug 159]: Users could make changes to devices such as changing descriptions or room assignments and it appeared that the changes did not stick.

3. [Bug #194]: The port setting for the findvera.com service would get lost if you changed your username/password, making the service report 'Host not found'

4. [Bug #177]: Local authentication now works. From the Users's tab you can have Vera require a valid username/password to access the setup site. This means 2 passwords are required to access 'control' from the findvera service: 1) the username/password for findvera.com, 2) one of the local usernames/passwords created on Vera's users tab.

5. [Bug #12]: Intermittently the javascript would break and the user wouldn't be able to choose a subsequent action after choosing 'after x seconds/minutes' or be able to set a temperature on the thermostat.

6. [Bug #196]: This might be solved. We weren't able to reproduce but fixed something that could have theoretically caused it to happen.

7. [Bug #7]: You couldn't enable tech support remote access if the site failed to load

8. When you saved changes using the control option at FindVera.com your data file become corrupted.

9. The JavaScript will now let the user continue and use a backup if the main data file is corrupted.

10. [Bug #160]: It was very easy to press the reset button and lose your data. Now to do a reset you need to double-click the black button.

11. [Bug #195]: Also, reset will no longer remove the remote access keys causing the findvera service to stop working.

12. [Bug #188]: Allow users to add their cameras manually.

1.0.262 - October 15, 2008

Known Issues

1. The iPhone interface is not fully implemented. Specifically the links to control devices are plain text, and most actions take you to an empty page with a small 'OK' button. The commands do work, and you can press the back button on the 'OK' page to return to the list of scenes/devices in a room. This will be finished in the final release.

2. Periodically you may find that Vera's Setup page does not allow you to continue making changes, in particular, when creating scenes and you choose the 'after X seconds/minutes' pull-down you may not see the next pull-down to chose the subsequent action. Work-around: Click save to save your changes, and reload the page (or press F5).

3. When you assign new devices to a room and click save or continue it appear that your room assignments didn't take. They actually did. Press F5 to reload the page if this appears to be the case.

4. The setup page doesn't work with the new Google Chrome browse because the pull-down list in the scenes aren't being correctly sorted in Chrome. Firefox is the recommended browser, although we have found no issues with Internet Explorer or Safari.

5. The reset button is very close to the power and USB connectors and it's easy to press it, and it will clear out your configuration. We will make it so you have to hold the button to do a factory reset. In the meantime, careful to avoid pressing that button.

6. On the users tab you can specify that a local authentication is required to access Vera and which users can change the configuration. This is not working.

Personal tools