Raspberry Pi - Interfacing with Vera

From MiOS
(Difference between revisions)
Jump to: navigation, search
(LPG, i-butane, propane, methane, alcohol, hydrogen, smoke)
 
(2 intermediate revisions by one user not shown)
Line 1: Line 1:
 +
[[Category:Hardware]][[Category:Development]]
 
[[File:RP1.jpg|400px]]
 
[[File:RP1.jpg|400px]]
  
Line 104: Line 105:
  
 
[[File:GSP_3.jpg|400px]]
 
[[File:GSP_3.jpg|400px]]
 +
 +
Gas Sensor Plugin for UI5:
 +
https://docs.google.com/file/d/0Bz4omZm4gYcsVFNwSWNVbFFnTTg/edit?usp=sharing
  
 
=====Alcohol=====
 
=====Alcohol=====
Line 112: Line 116:
  
 
https://www.sparkfun.com/datasheets/Sensors/Biometric/MQ-7.pdf
 
https://www.sparkfun.com/datasheets/Sensors/Biometric/MQ-7.pdf
 +
 +
====Geiger-Mueller counter====
 +
 +
http://wiki.micasaverde.com/index.php/CurrentCost_meters#OptiSmart
  
 
==Hardware==
 
==Hardware==

Latest revision as of 02:48, 15 June 2013

RP1.jpg

RP2.jpg


Contents

[edit] Interfaces

[edit] I2C

[edit] Barometric pressure and temperature sensor

http://learn.adafruit.com/using-the-bmp085-with-raspberry-pi/overview

BMP085 vs AirportWeatherStation small.jpg

The BMP085 sensor is about 50 m above sea level. The Wunderground data is from a weather station at an airport nearby.

[edit] Light sensor

http://forums.adafruit.com/viewtopic.php?f=8&t=34922&start=45#p185714

[edit] Light and proximity sensor

http://www.adafruit.com/products/466

[edit] LCD and keypad

http://learn.adafruit.com/adafruit-16x2-character-lcd-plus-keypad-for-raspberry-pi

[edit] ADC

http://learn.adafruit.com/adafruit-4-channel-adc-breakouts

[edit] USB

[edit] CO2 sensor

http://wiki.micasaverde.com/index.php/CO2_Sensor#Using_the_CO-20_sensor_with_the_Raspberry_Pi

[edit] Other

[edit] LCD

http://learn.adafruit.com/drive-a-16x2-lcd-directly-with-a-raspberry-pi/overview

[edit] Mail sensor

http://learn.adafruit.com/raspberry-pi-e-mail-notifier-using-leds/overview

[edit] Temperature and humidity sensor

http://learn.adafruit.com/adafruits-raspberry-pi-lesson-11-ds18b20-temperature-sensing/

http://learn.adafruit.com/dht-humidity-sensing-on-raspberry-pi-with-gdocs-logging/overview

[edit] Motion sensor

HW used: https://www.sparkfun.com/products/8630

WARNINGS:

The colors of the wires can vary greatly. Looking at the unit from the top, the middle wire is ground, the left-most wire is the alarm, and the right-most is the power.

You have to solder a new wire to the L78L05 (http://www.fairchildsemi.com/ds/LM/LM78L05A.pdf; SOT-89) voltage regulator’s output or remove the regulator entirely and bridge the input pad to the output pad if you are driving the sensor with 5V.

The GPIO pins are NOT 5V tolerant and are NOT over-voltage protected. You have to reduce the PIR alarm voltage to 3.3V.

http://learn.adafruit.com/adafruits-raspberry-pi-lesson-12-sensing-movement

[edit] Door sensor

http://learn.adafruit.com/adafruits-raspberry-pi-lesson-12-sensing-movement

[edit] LED

http://learn.adafruit.com/raspberry-pi-e-mail-notifier-using-leds/wire-leds

[edit] Squeezebox

Requirements: Logitech Media Server

Install squeezelite (http://www.raspberrypi.org/phpBB3/viewtopic.php?f=38&t=25778).

Start squeezelite:

./squeezelite-armv6hf -o hw:CARD=<card> -m <client MAC address> -n <client name> <LMS IP address>

Please note that the 'hw:' prefix is required for Google TTS (16 kHz mono mp3) to work.

Test the installation:

telnet <LMS ip address> 9090
<client MAC address> playlist play http://translate.google.com/translate_tts?tl=en&q=Test

[edit] Gas sensors

[edit] LPG, i-butane, propane, methane, alcohol, hydrogen, smoke

http://english.hwsensor.com/ewebeditor/uploadfile/en/MQ-2.pdf

GSP 1.jpg

GSP 2.jpg

GSP 3.jpg

Gas Sensor Plugin for UI5: https://docs.google.com/file/d/0Bz4omZm4gYcsVFNwSWNVbFFnTTg/edit?usp=sharing

[edit] Alcohol

http://english.hwsensor.com/ewebeditor/uploadfile/en/MQ-3.pdf

[edit] CO

https://www.sparkfun.com/datasheets/Sensors/Biometric/MQ-7.pdf

[edit] Geiger-Mueller counter

http://wiki.micasaverde.com/index.php/CurrentCost_meters#OptiSmart

[edit] Hardware

[edit] Software

https://github.com/adafruit/Adafruit-Raspberry-Pi-Python-Code

Personal tools