From MiOS
(Difference between revisions)
|
|
| Line 1: |
Line 1: |
| − | If you already have a wireless network and you want to connect Vera to it, you'll need to set Vera Wi-Fi to Client mode. To do that follow these steps:
| + | See the topic: [[WiFiClientMode]] |
| − | | + | |
| − | Step 0. Unplug any cables from the WAN Port
| + | |
| − | Step 1. Open Vera Web Admin page: http://local.findvera.com
| + | |
| − | Step 2. Go to Advanced -> Net&Wi-Fi
| + | |
| − | Step 3. Set:
| + | |
| − | - Firewall: No Firewall (bridge)
| + | |
| − | - DHCP Server: Off
| + | |
| − | Step 4. Press Save & Apply Changes
| + | |
| − | Step 5. Go to Advanced -> Net&Wi-Fi -> Advanced Configurations
| + | |
| − | If you haven't setup any users, login with root (by default there is no password)
| + | |
| − | Step 6. Go to Network -> Wireless
| + | |
| − | Step 7. Wireless Adapter wl0 Configuration
| + | |
| − | Set Radio to On and Channel to Auto
| + | |
| − | Step 8. Wireless Virtual Adapter Configuration for Wireless Card wl0
| + | |
| − | Set:
| + | |
| − | - Mode: Client
| + | |
| − | - ESSID: (according to your existing wireless network)
| + | |
| − | - Encryption Type: (according to your existing wireless network)
| + | |
| − | Step 9. Press Save & Apply Changes
| + | |
Revision as of 23:29, 1 October 2009
See the topic: WiFiClientMode
