Luup UPnP Variables and Actions

Revision as of 14:46, 20 April 2017

This is a list of all the UPnP actions and variables used by MiOS.

Some actions and variables have self-explanatory names, so there's a dash ('-') instead of the description.

HomeAutomationGateway1

Service ID: urn:micasaverde-com:serviceId:HomeAutomationGateway1
File: S_HomeAutomationGateway1.xml

Variable	Type	Description
DataVersion	ui4	A number that increases each time the data changes.
UDN	string	The Unique Device Name of the UPnP device.

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
Reload	none		Reload the LuaUPnP engine.
ModifyUserData	inUserData	UserData	Make changes to the UserData. `inUserData` is the new UserData object which will be added to the UserData or will replace an existent UserData object. `DataFormat` must be json. If `Reload` is 1 the LuaUPnP engine will reload after the UserData is modified. For more information read the ModifyUserData page.
	DataFormat	string
	Reload	boolean
SetVariable	DeviceNum	int or string	Create or change the value of a variable. `DeviceNum` can be an UDN or a number. `Service` is the service ID of the variable. `Variable` is the variable name. `Value` is the new variable value.
	Service	string
	Variable	string
	Value	string
RunScene	SceneNum	int	Run the given scene.
SceneOff	SceneNum	int	Turn off all the devices from DEVICE_CATEGORY_DIMMABLE_LIGHT and DEVICE_CATEGORY_SWITCH from the given scene.
RunLua	DeviceNum	int or string	Run the given Lua code. If `DeviceNum` is specified, the code is run using that device's interface.
RunLua	Code	string
CreateDevice	deviceType	string	Create a device using the given parameters. `deviceType` is the UPnP device type. `internalID` is the specific ID (also known as altid) of the device; for example, for Z-Wave devices this is the Node ID, and for Insteon device it is the Insteon ID. `Description` is the device name, which is shown to the user on the dashboard. `UpnpDevFilename` is the UPnP device description file name. `UpnpImplFilename` is the implementation file to use. If the device is IP based, `IpAddress` is the IP address and port of the device. If this should be the child of another device, `DeviceNumParent` is the device number of the parent device. `RoomNum` is the number of the room the device will be in. `PluginNum` tells the device which plugin to use. The plugin will be installed automatically if it's not already installed. `StateVariables` is a string containing the variables you want set when the device is created. You can specify multiple variables by separating them with a line feed ('\n'), and use ',' and '=' to separate service, variable and value, like this: `service,variable=value\nservice,variable=value\n`... If `Reload` is 1, the Luup engine will be restarted after the device is created.
	internalID	string
	Description	string
	UpnpDevFilename	string
	UpnpImplFilename	string
	IpAddress	string
	MacAddress	string
	Username	string
	Password	string
	DeviceNumParent	int
	RoomNum	int
	PluginNum	int
	StateVariables	string
	Reload	boolean
DeleteDevice	DeviceNum	int	Delete the device given either through its number, or through its UDN.
DeleteDevice	UDN	string
CreatePlugin	PluginNum	int	Create a plugin with the `PluginNum` number and `Version` version. `StateVariables` are the variables that will be set when the device is created. For more information look at the description of the CreateDevice action above.
	Version	int
	StateVariables	string
DeletePlugin	PluginNum	int	Uninstall the given plugin.
CreatePluginDevice	PluginNum	int	Creates a device for plugin #`PluginNum`.
CreatePluginDevice	StateVariables	string	Creates a device for plugin #`PluginNum`.
ImportUpnpDevice	UDN	UDN
ImportUpnpDevice	RoomNum	DeviceNum
LogIpRequest	IpAddress	UDN
LogIpRequest	MacAddress	UDN
SetHouseMode	Mode	int	Changes the house mode. `Mode` can be: `1` = Home `2` = Away `3` = Night `4` = Vacation

HaDevice1

Service ID: urn:micasaverde-com:serviceId:HaDevice1
File: S_HaDevice1.xml

Variable	Type	Description
CommFailure	boolean	This is set to 1 if we've lost communication with the device.
Configured	boolean	The configuration state of the device: -3 = Configuration failed -2 = Configuration in progress -1 = Device waiting to be configured 0 = Device not configured 1 = Device successfully configured 2 = Device partially configured
AutoConfigure	boolean	If this is "1", MiOS will automatically check the routing info for this every 12 hours.
BatteryLevel	i1	The battery level reported by the device.
BatteryDate	boolean	The UNIX time when the `BatteryLevel` was reported.
LastTimeCheck	ui4	Only for devices that are capable of implementing time, this is when the time was last checked.
LastTimeOffset	ui1	For `LastTimeCheck`, this is the timezone offset from UTC when the time was last checked.
LastUpdate	ui4	This is when the device information was last updated. (Mostly used for Z-Wave devices)
FirstConfigured	ui4	This is when the device was first configured. (Mostly used for Z-Wave devices)
IgnoreRoom	boolean	Used only by the MiOS scene controller. Internal stuff.
Commands	string	This is a comma separated list of `ControlCodes` for the enabled UI controls. If the `ControlCode` of an UI control (e.g. button) is not in this list, the button will be disabled (greyed out). If this variable is missing, all controls will be enabled. If this variable is empty, all controls will be disabled.
IODevice	ui2	The device number to connect to for IO. (this is on the master device)
IOPort	ui2	The port to receive connections on from `IODevice`. (this is on the serial port)
ReverseOnOff	boolean	If this is "1", the commands for some devices are reversed (e.g. the On command will turn the device Off, and vice versa). Not all devices support this.
sl_Alarm	string	Currently used only by the water leak sensor, contains the alarm code.
ModeSetting	string	Contains the state of the device for each house mode. The format is: <house mode>:<state>;<house mode>:<state>;... If `state` is empty, the sensor is disarmed/bypassed. If `state` is "A", the sensor is armed. Example: 1:;2:A;3:A;4:A In `Home`(1) mode the sensor is disarmed; in `Away`(2), `Night`(3) and `Vacation`(4) modes the sensor is armed.
Children	string	This is a comma separated list of KitDevice numbers. LuaUPnP will create a child device for every item in the list, with the specified KitDevice properties. Can be used to add children to devices which don't have MultiChannel support.
PollRatings	double	This is a measure of how well the polls are doing, where 5.0 means that the last 50 polls were successful and 0.0 means that all the last 50 polls were unsuccessful.
WakeupRatings	double	This is a measure of how well the wakeups are being received, where 5.0 means that the we received the last 50 wakeups when they have suppose to be sent and 0.0 means that we didn't receive any of the 50 last wakeups that the device should have sent
AlarmTypes	string	See the description of this variable in ZWaveDevice1 section, because it should belong to the service urn:micasaverde-com:serviceId:ZWaveDevice1, but it was kept in urn:micasaverde-com:serviceId:HaDevice1 to maintain backward compatibility.
CustomModeConfiguration	string	Implementation of custom preset modes for any device. Format: <mode code>;<mode name>;<upnp_action>[\|<mode code>;<mode name>;<upnp_action>] where: `<upnp_action>` = `<service>/<action>/<parameters>` `<parameters>` = `<paramName>=<value>[&<paramName>=<value>]` If the value is '?', it means that it's a wildcard and the ModeSettings variable should contain a comma separated list of values in order to substitute this '?' wildcard. If the value is not '?', then the value is fixed and it should be URL encoded. Example: h;h code;urn:upnp-org:serviceId:SwitchPower1/SetTarget/newTargetValue=?&otherParameter=45&another=?\|s;s code;urn:upnp-org:serviceId:Dimming1/SetTargetLevel/newLevel=34&other=?&another=4
CustomModeControls	string	Used to tell the UI what controls to show in the House modes configuration page for the actions in the CustomModeConfiguration variable. Format: <mode>:<control info for arg #1>;<control info for arg #2>;..;<control info for arg #N>[\|<mode>:<control info for arg #1>]

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
Reconfigure	none		Reconfigure the device.
StressTest	none		Stress test the Z-Wave device.
Remove	none		Remove the device from the Z-Wave network.
Poll	none		Poll the device.
ToggleState	none		Toggle the state of the device (e.g. if the device it's Off, turns it On). The device must have a binary state (On/Off, Locked/Unlocked, etc.).

ZWaveDevice1

Service ID: urn:micasaverde-com:serviceId:ZWaveDevice1
File: S_ZWaveDevice1.xml (nonexistent)

Variable	Type	Description
PollSettings	ui4	This is the polling frequency for a node (i.e. the minimum number of seconds between two poll commands to the same node). If this variable doesn't exist or is blank, the default polling frequency set in the `ZWaveNetwork1`'s `PollFrequency` variable will be used. If it's 0, polling will be disabled for this node.
PollCommands	string	A comma-separated list of command classes/commands to poll. '`X`' means the device won't respond to any poll.
MultiChEndpoint	string	Internal stuff.
MultiChCapabilities	string	Internal stuff.
Neighbors	string	This is a comma-separated list of the neighbor devices' node IDs. '1' is the Vera's node ID.
NeighborsInverse	string	This is a comma-separated list of the neighbors that see us.
Capabilities	string	The first 6 numbers in `Capabilities` are what is reported by the `ZW_GetNodeProtocolInfo` function: Capability, Security, Reserved, Basic Device Class [, Generic Device Class, Specific Device Class]. If the `Capability` is >= 128, then the device listens for commands, otherwise it's a battery operated device that only wakes up occasionally. After the '\|' in `Capabilities` are the command classes supported. More information here: ZWave Command Classes
SecurityFailed	boolean	If this is "1", MiOS won't talk to this node with security even if the node reports it can.
LastReset	ui4	When we last reset the node association. (UNIX time)
WakeupInterval	ui4	How often this battery operated device should wake up to report its status. The default value is 1800 seconds.
ConfiguredWakeupInterval	ui4	The wakeup interval already configured on the device.
LastWakeup	ui4	When this device last woke up and reported its status. (UNIX time)
LastRouteUpdate	ui4	When this device's routing information was last checked/updated. (UNIX time)
Health	ui1	A rating from 0-5. A large number means that MiOS can communicate with it easily.
HealthDate	ui4	The date the rating was assigned. (UNIX time)
VariablesGet	string	This is a comma-separated list of the configuration settings read from the device. The format is: variable1_number,variable1_value,variable2_number,variable2_value,...
VariablesSet	string	This is a comma-separated list of the configuration settings set by the user. The format is: variable1_number-variable1_description,variable1_data_type,variable1_value,variable2_number-variable2_description,variable2_data_type,variable2_value,...
AssociationGet	string	This are the association settings read from the device.
AssociationSet	string	Z-Wave associations for a device are stored in this variable. The associations are delimited by ';', with the first digit being the group number followed by a comma separated list of nodes to be associated with that group. Note these are Z-Wave node IDs, not device IDs (ie the 'altid' in the UI). If the node ID is 'z', it means the node ID of the device for which the variable is set. For multi-channel there is a '.' following the node ID with the endpoint ID. Example: 1,3.4,7;2,5.1,8 Means group #1 is associated with node #3 endpoint #4 and with node #7, which is non-multi-channel; group #2 is associated with node #5 endpoint #1, and with node #8.
AssociationNum	ui1	The number of association groups supported by the device.
NonceACK	boolean	Internal stuff.
ManufacturerInfo	string	Device information. Format: ManufacturerID,ProductType,ProductID
VersionInfo	string	This is what's reported by the COMMAND_CLASS_VERSION command VERSION_REPORT. There are 5 values: Z-Wave Library Type, Z-Wave Protocol Version, Z-Wave Protocol Sub Version, Application Version, Application Sub Version. The `Application Version` is specific to the device and not defined by Z-Wave.
SetPointInfo	string	A comma-separated list of the supported setpoint types: `H1` = Heating `C1` = Cooling `F1` = Furnace `D1` = Dry Air `MA` = Moist Air `AC` = Auto changeover `H2` = Energy Save Heating `C2` = Energy Save Cooling `AH` = Away Heating
NodeInfo	string	The list of the command classes supported by this device. (hexadecimal numbers)
InitialName	string	The name that was initially set when the node was first added.
ConfiguredName	string	The user-specified name when we configured the node.
ConfiguredVariable	string	The user-specified `VariablesSet` when we configured the node.
ConfiguredAssoc	string	The user-specified `AssociationSet` when we configured the node.
Documentation	string	URL of the documentation used on the Device Options page.
MeterType	ui1	The meter type: 1 = electric 2 = gas 3 = water
MeterScale	ui4	A bit map of the supported meter scales.
AlarmType	string	List of the supported alarm types.
PollOk, PollTxFail, PollNoReply	ui4	These variables are incremented each time the last poll job has the status they describe. They are reset after each network heal.
ManualRoute	string	A route specified by the end-user. This is a dot-separated list of nodes.
AllRoutesFailed	boolean	This is "1" when all the manual routes have failed.
AutoRoute	string	This contains a list of various routes chosen by profilings. Format: route1_node1.route1_node2...-route1_score[x],route2_node1.route2_node2...-route2_score[x],... The `score` is a measure of latency and accuracy, the lower the number, the better. '`x`' means that the last attempt to use this route failed, so it won't be used anymore.
IgnoreDirectScene	boolean	Internal stuff.
SwitchMlSettings	string	Internal stuff.
BasicSetCapabilities	string	Allows defining actions for BASIC_SET messages. Format: <Value>=<Action><Endpoint> where: Value : the BASIC_SET Value; if Value is "XX", it means any value Action : the Action to perform; the supported values are: T`=Trip`, U`=Untrip`, O`=On`, F`=Off`, D`=Dim` Endpoint : the Endpoint device ID (altid); if Endpoint=0, it means the parent node, or the current node if the device has no children Examples: `00=Ue1,FF=Te1` => if receive 0x00, Untrip endpoint "e1"; if receive 0xFF, Trip endpoint "e1" `XX=D02` => Dim endpoint 02 to whatever value received `00=T0,FF=U0` => if receive 0x00, Trip the current node; if receive 0xFF, Untrip the current node
SupportedMRTypes	string	Allows defining which meter report types are supported by the device. Format: <CC Hex>-<Supported Type>,<Supported Type>;<CC Hex>-<Supported Type>,<Supported Type> where: CC Hex : the Hex value of the command class (without 0x): 0x31 for COMMAND_CLASS_SENSOR_MULTILEVEL 0x32 for COMMAND_CLASS_METER Supported Type : The HEX value of the type supported for the Command class without 0x Supported types for COMMAND_CLASS_SENSOR_MULTILEVEL: Temperature = 0x01 General = 0x02 Luminance = 0x03 Power = 0x04 RelativeHumidity = 0x05 Velocity = 0x06 Direction = 0x07 AtmosphericPressure = 0x08 BarometricPressure = 0x09 SolarRadiation = 0x0A DewPoint = 0x0B RainRate = 0x0C TideLevel = 0x0D Weight = 0x0E Voltage = 0x0F Current = 0x10 CO2level = 0x11 AirFlow = 0x12 TankCapacity = 0x13 Distance = 0x14 SeismicIntensity = 0x19 UltraViolet = 0x1B Supported types for COMMAND_CLASS_METER: Electric=0x01 Gas=0x02 Water=0x03 Examples: `31-0F,0E,10,1B;32-01,03` => Device supports Voltage, Weight, Current and UltraViolet for COMMAND_CLASS_SENSOR_MULTILEVEL and Electric and Water from COMMAND_CLASS_METER If the variable is empty it will be treated as support anything. If the variable does not contain a command class that command class will be treated as support everything.
NoChildren	boolean	If this variable is 1, delete the child devices, and don't allow the creation of other child devices, to avoid creating ghost devices.
AlarmTypes	string	*(NOTE: this is its new service. urn:micasaverde-com:serviceId:HaDevice1* was left unchanged to mantain backward compatibility.)** Allows setting what each Alarm Type does for devices using COMMAND_CLASS_ALARM / COMMAND_CLASS_NOTIFICATION. The format is: AlarmTypes:AlarmLevels:AlarmCode:Action;AlarmTypes:AlarmLevels:AlarmCode:Action where: `AlarmTypes` : `type1,type2-type3,!type4` `AlarmLevels` : `00,01,05-20,!FF` `AlarmCode` : `SMOKE`, `CO`, `TAMPER_ALARM`, etc. `Action` : `0` = don't update the Tripped variable, `1` = update the Tripped variable, `2` = ignore the message (i.e. don't update the sl_Alarm variable) Example: 01:FF:SMOKE:1;0C:FF::1;0D:FF:TAMPER_ALARM:0 if Alarm Type is 0x01 and the Alarm Level is 0xFF, then set the sl_Alarm variable to "SMOKE" and trip the sensor if Alarm Type is 0x0C and the Alarm Level is 0xFF, don't update the sl_Alarm variable, and trip the sensor if Alarm Type is 0x0D and the Alarm Level is 0xFF, then set the sl_Alarm variable to "TAMPER_ALARM", but don't trip the sensor
AlarmTypesV2	string	Allows customizing the handling of the COMMAND_CLASS_ALARM / COMMAND_CLASS_NOTIFICATION >= v2 messages. The format is a ';' separated list of tokens. Format of each token: TypesV1:LevelV1:NotificationStatus:NotificationType:Event:AlarmCode:TripValue Where: `TypesV1` : type1_v1,type2_v1-type3_v1,!type4_v1, XX (don't care) `LevelV1` : 00,01,02-05,!FF, XX (don't care) `NotificationStatus` : 01-FF, XX (don't care) `NotificationType` : type1,type2-type3,!type4, XX (don't care) `Event` : 00,01,03-5A,!04,!FF, XX (don't care) `AlarmCode` : SMOKE, CO, TAMPER_ALARM, etc. `TripValue` : 0 = Untrip, 1 = Trip, C = don't update the Tripped variable (only the Alarm Code), X = Ignore If the TypeV1 or NotificationType are not XX and if there was no match, the function will try the next token.
AssociationGroups	string	If specified, associate ourselves only with these groups, not all groups. The groups should be given as a comma separated list, like this: 1,3,4,255 You could add this variable with a value = 0 if you want to be in NO association groups.
IgnoreCommandClass	string	Allows ignoring specific command classes (CC) for that device. Format: <CC #1>-<Command #1>,<Command #2>;<CC #2>-;<CC #3>-<Command #1> Both the command classes and the commands are given by their hex code. is used as an wild card indicating all commands. Example: 26-03,05;71-*;20-03 That means: ignore CC 26 commands 03 and 05, all commands from CC 71, and CC 20 command 03.

ZWaveNetwork1

Service ID: urn:micasaverde-com:serviceId:ZWaveNetwork1
File: S_ZWaveNetwork1.xml

Variable	Type	Description
NetStatusID	ui1	The status of the Z-Wave network: 0 = Status not set 1 = OK 2 = Quiting 3 = Waiting to quit 4 = No dongle 5 = Configuring: still running init/configure scripts 6 = Failure 7 = Initializing
NetStatusText	string	Full Z-Wave network status description
LastError	string	The last Z-Wave error in the network
LastUpdate	ui4	The UNIX time when the Z-Wave component of the LuaUPnP engine started.
LastDongleBackup	ui4	The UNIX time of the last Z-Wave dongle backup.
LastHeal	ui4	The UNIX time of the last Z-Wave network heal.
VersionInfo	boolean	The Z-Wave version.
HomeID	boolean	The unique ID of the Z-Wave network.
Role	boolean	Z-Wave specific stuff.
TO3066	boolean	Internal stuff.
ComPort	string	This is the port where MiOS will search for the Z-Wave dongle. On Vera Lite, this is `/dev/ttyS0`.
LockComPort	boolean	If this is "1", MiOS won't search for the Z-Wave dongle on the other available ports if it doesn't find it on `ComPort`.
Use45	boolean	If this is "1", use Z-Wave version 3.20 instead of 2.78.
UseMR	boolean	If this is "1", use MiOS routing.
LimitNeighbors	boolean	With MiOS routing: if this is "1", when the routing table is created, consider only Z-Wave's neighbors as valid options.
PollingEnabled	boolean	If this is "1", MiOS will automatically poll the Z-Wave devices.
PollDelayInitial	ui1	Number of seconds after the LuaUPnP engine has (re-)started before the polling loop begins.
PollDelayDeadTime	ui1	Number of seconds MiOS must not have transmitted any non-poll command before the next poll command is sent.
PollMinDelay	ui1	Number of seconds between poll commands.
PollFrequency	ui1	Minimum number of seconds between poll commands to the same node.
SceneIDs	string	Used for scene controllers. This is a CSV where each item has this format: `node#-button#=ZWaveSceneID`

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
ResetNetwork	ResetMode	string	Reset the Z-Wave network. `ResetMode` can be "SIS" or "SUC". `HomeID` is a 32 bit hex number representing the new HomeID. If this parameter doesn't exist or is 0, MiOS will generate the new HomeID. `ZeroMemory`: if this is "1", the memory will be zeroed before resetting.
	HomeID	string
	ZeroMemory	boolean
PutByte	StartAddress	string	Used to convert Z-Wave from 2.78 to 3.20 in which case the `StartAddress` parameter must be "convert502_452" and the rest are ignored.
	StopAddress	string
	Value	ui4
ReconfigureAllNodes	FailedOnly	boolean	Reconfigure the Z-Wave nodes. If `FailedOnly` is "1", only the devices that failed to configure are reconfigured.
UpdateNetwork	none		Get network update from SUC/SIS.
UpdateNeighbors	Device	ui4	Update the neighbor nodes of the given device. `Device` is the device number.
BackupDongle	Restore	boolean	Backs up the Z-Wave network. The backup is in `/etc/cmh/dongle.dump`. If `Restore` is "1", the Z-Wave network is restored from the backup.
PollAllNodes	none		-
RemoveNodes	InclusionMode	string	Puts Vera in exclude mode. `InclusionMode` can be "FullPower" or anything else, in which case the exclusion will be low power. `NodeType` is the type of node to be excluded. The valid values are: 1 = any 2 = controller 3 = slave 4 = existing 5 = stop `Timeout` is the number of seconds Vera will be in exclude mode. If `Multiple` is "0" then Vera will exit exclude mode after a node is excluded. If `Reload` is "1" the LuaUPnP engine will be restarted after Vera exits exclude mode.
	NodeType	ui1
	Timeout	ui1
	Multiple	boolean
	Reload	boolean
AddNodes	InclusionMode	string	Puts Vera in include mode. `InclusionMode` can be "FullPower" or anything else, in which case the inclusion will be low power. `NodeType` is the type of node to be included. The valid values are: 1 = any 2 = controller 3 = slave 4 = existing 5 = stop `Timeout` is the number of seconds Vera will be in include mode. If `Multiple` is "0" then Vera will exit include mode after a node is included. `ControllerShift` must be "0". If `Reload` is "1" the LuaUPnP engine will be restarted after Vera exits include mode. `PK_KitDevice` is the KitDevice number of the device we expect to be included.
	NodeType	ui1
	Timeout	ui1
	Multiple	boolean
	ControllerShift	boolean
	Reload	boolean
	PK_KitDevice	ui4
DownloadNetwork	none		Copy the Z-Wave network from a master controller.
HealNetwork	BatteryMinutes	ui1	Heals/consolidates the Z-Wave network. `BatteryMinutes`: how many minutes to wait for battery operated devices to be discovered. If `Node` is not blank, then only this node will be repaired. `StressCycles` is the number of cycles to stress test each node. If `Configure` is "1", then all the devices will be re-configured when done. If `ManualRoute` is "1", then only update MiOS routing (overrides other settings). `StartStage` is the starting heal stage. The valid values are: 1 = Request network update. 2 = Request neighbor node update. 3 = Update the routing tables and neighbor nodes. 4 = Calculate the best routes. 5 = Re-configure all nodes. 6 = Wait `BatteryMinutes` to request neighbor node update and configure all battery operated nodes. 7 = Do a stress test for `StressCycles`. `StopStage`: Same as `StartStage`.
	Node	ui1
	StressCycles	ui1
	Configure	boolean
	ManualRoute	boolean
	StartStage	ui1
	StopStage	ui1
SetPolling	IsTemporary	boolean	Set the polling parameters. If `IsTemporary` is "1", then these polling settings will be lost when the LuaUPnP engine is reloaded. `PollingEnabled`: see the related variable. `PollDelayInitial`: see the related variable. `PollDelayDeadTime`: see the related variable. `PollMinDelay`: see the related variable. `PollFrequency`: see the related variable.
	PollingEnabled	PollingEnabled
	PollDelayInitial	PollDelayInitial
	PollDelayDeadTime	PollDelayDeadTime
	PollMinDelay	PollMinDelay
	PollFrequency	PollFrequency
SendData	Node	ui1	Sends the Z-Wave `Data` to the Z-Wave `Node`. Examples: 1. Set parameter 29 to "3" on node 15: HTTP request: `/data_request?id=action&DeviceNum=1&serviceId=urn:micasaverde-com:serviceId:ZWaveNetwork1&action=SendData&Node=15&Data=x70%204%2029%201%203` Lua: `luup.call_action("urn:micasaverde-com:serviceId:ZWaveNetwork1", "SendData", {Node=15, Data="x70 4 29 1 3"}, 1)` 2. Turn on a light (node 7): HTTP request: `/data_request?id=action&DeviceNum=1&serviceId=urn:micasaverde-com:serviceId:ZWaveNetwork1&action=SendData&Node=7&Data=x20%201%20xFF` Lua: `luup.call_action("urn:micasaverde-com:serviceId:ZWaveNetwork1", "SendData", {Node=7, Data="x20 1 xFF"}, 1)`
SendData	Data	string
SimulateIncomingData	Data	string	Calls the Z-Wave message handler for the given data.

USBUIRT1

Service ID: urn:micasaverde-com:serviceId:USBUIRT1
File: S_USBUIRT.xml

Variable	Type	Description
ComPort	string	The path of the USB port the UIRT is connected to. On Vera Lite this is `/dev/ttyUSB0`

Camera1

Service ID: urn:micasaverde-com:serviceId:Camera1
File: S_Camera1.xml

Variable	Type	Description
VideoURLs	string	This variable defines the streaming parameters, and without it streaming doesn't work. This variable has this structure: `Info1:URL1:Info2:URL2:` The `Info` parameters are: 1. The protocol: can be `rtsp` or `http` 2. HTTP authentication required: 1 = yes, send the username and password in the request, 0 = no, don't send the username and password 3. Video codec: `mpeg4` \| `mjpeg` \| etc. 4. Audio codec: blank = no audio 5. Resolution: `t` = thumbnail, `s` = small, `m` = medium, `l` = large 6. Width: 640 7. Height: 480 8. Players: `q`\|`a`\|`i`\|`w`, a string of characters indicating known good players. `q` = Quicktime plugin, `a` = Android, `i` = iPhone, `w` = normal web browser. The `URL` is the streaming URL compatible with the players specified in `Info`. Currently only the `protocol`, `HTTP auth`, `players` and `URL` parameters are used. The rest of the parameters are ignored. `VideoURLs` example for VistaCam: `rtsp,0,mpeg4,,m,640,480,qai:img/media.sav:http,0,mjpeg,,m,640,480,w:img/video.mjpeg:`
URL	string	This is the URL to get a snapshot from the camera.
RingBuffer	string	This variable contains the ring buffer parameters. The format is: `Enabled,BufferSeconds,NumFramesToPurge,Format,URL` `Enabled` can be 0 or 1. If it's 1, the ring buffer is enabled. `BufferSeconds`: how many seconds of video to keep in the buffer. This is limited by the available memory on Vera. Setting this to a large value will cause instability. `NumFramesToPurge`: how many frames to wait before attempting to purge. `Format` can be 2=MJPEG, 3=MP4. `URL` is the streaming URL.
RelatedSensors	string	Comma separated list of device numbers: archive a photo whenever one of the sensors is tripped.
SensorArchiveSeconds	ui4	How many seconds to archive the video after the sensor(s) are tripped.
RelatedLights	string	Comma separated list of device numbers: which lights should be turned on when viewing this camera.
LightOptions	string	When to turn on the lights: `V`: when I view the camera from the web or phone; `S`: when the sensor(s) above are tripped and they are armed; `B`: when the sensors above are tripped and they are not armed; `A`: when you take an automatic picture for the archive; So `VSBA` means do them all.
AutoArchiveSeconds	ui4	Archives a picture from the camera every this number of seconds.
AutoArchivePreserveDays	ui4	How many days to keep the pictures in the archive.
Streams	string	Contains a list separated by semicolons, where each element in the list has the following format: `<stream type>,<protocol>,<url>` The stream types currently supported are: `flv`, `flv_low`, `rtsp`, `rtsp_low`. The types with the "_low" suffix are the low bandwidth versions, and are used when streaming through the relay servers. The supported protocols are: `http`, `rtsp`. Example: `flv,http,/img/media.flv;rtsp,rtsp,/img/media.sav;flv_low,http,/img/media.flv?stream=2;rtsp_low,rtsp,/img/media.sav?stream=2`

PanTiltZoom1

Service ID: urn:micasaverde-com:serviceId:PanTiltZoom1
File: S_PanTiltZoom1.xml

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
MoveLeft	none		-
MoveRight	none		-
MoveUp	none		-
MoveDown	none		-
ZoomIn	none		-
ZoomOut	none		-
GoToPreset	presetNumber	ui1	Moves the camera to the given preset.

SwitchPower1

Service ID: urn:upnp-org:serviceId:SwitchPower1
File: S_SwitchPower1.xml

Variable	Type	Description
Target	boolean	The target state of the device.
Status	boolean	The current state of the device.

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SetTarget	newTargetValue	Target	Sets the target state of the device. Used to turn a device On or Off.

WindowCovering1

Service ID: urn:upnp-org:serviceId:WindowCovering1
File: S_WindowCovering1.xml

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
Up	none		-
Down	none		-
Stop	none		-

Dimming1

Service ID: urn:upnp-org:serviceId:Dimming1
File: S_Dimming1.xml

Variable	Type	Description
LoadLevelTarget	ui1	The target dimming value; it doesn't represent the actual dimming state.
LoadLevelStatus	ui1	Represents the actual dimming state.
TurnOnBeforeDim	boolean	Indicates that this device needs to turn on before setting the dimming level.
AllowZeroLevel	boolean	This device allows to set 0% level in ON state.

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SetLoadLevelTarget	newLoadlevelTarget	LoadLevelTarget	Sets the desired dimming level. Used to adjust the dimming level of a device.

DoorLock1

Service ID: urn:micasaverde-com:serviceId:DoorLock1
File: S_DoorLock1.xml

Variable	Type	Description
Target	boolean	Represents the target (desired) door state.
Status	boolean	Represents the current door state. "1" = locked, "0" = unlocked
PinCodes	string	The list of PIN codes. Syntax: <VERSION=2>user_code_id,active,PIN_code(encrypted),name(a-z,0-9); slot,slot_lock,w,[d\|s],dow,hour_start,minute_start,hour_stop,minute_stop; slot,slot_lock,t,[d\|s],start,stop;\t <VERSION=3>next_available_user_code_id\t user_code_id,active,date_added,date_used,PIN_code(encrypted),name(a-z,0-9); slot,slot_lock,w,[d\|s],dow,hour_start,minute_start,hour_stop,minute_stop; slot,slot_lock,t,[d\|s],start,stop;\t Where: `VERSION` is used to track syntax changes. `active` can be one of the following values: `0` = The code isn't programmed. `1` = The code is permanently programmed into the lock, which doesn't support hardware-based scheduling. `2` = The code is permanently programmed into the lock, which does support hardware-based scheduling. `3` = The code is programmed into the lock and will be removed by software later. `4` = The code is not programmed into the lock, but it will be programmed later by the software. `5` = The code is programmed into the lock which supports hardware-based scheduling and will enable/disable it automatically. The `slotid` is an auto-incrementing number. The `slotid_lock` is the ID in the lock. The restriction type: `w` (weekly) or `d` (daily repeating) = day of week based, `t` = time based (yearly) `[d\|s]`: internal stuff.
NumSchedules	string	Maximum number of restrictions supported by the door lock. Syntax: max_weekly,max_yearly,max_daily_repeating Where: `max_weekly` is the number of weekly restrictions slots. `max_yearly` is the number of yearly restrictions slots. `max_daily_repeating` is the number of daily repeating restrictions slots.
MinPinSize and MaxPinSize	ui1	The minimum and maximum number of digits of the PIN code.
sl_UserCode	string	Contains information about the last used PIN code: UserID="<pin_slot>" UserName="<pin_code_name>"
sl_PinFailed	boolean	This becomes "1" when a bad PIN code is entered.
sl_CodeChanged	ui1	If a PIN code was changed using the lock keypad, this contains the PIN code index number.
sl_LockButton	boolean	This is "1" if the Lock button has been pressed on the lock keypad.
sl_LockFailure	boolean	This is "1" if the lock fails to operate.
sl_UnauthUser	boolean	This is "1" if the user code was entered outside of a valid date.
sl_LockChanged	ui1	If a PIN code was changed using the lock keypad, this contains the PIN code index number.
sl_LowBattery	boolean	This is "1" when the battery level is low.
sl_VeryLowBattery	boolean	This is "1" when the battery level is very low.
UsesPinCodes	boolean	If this is "0", this door lock doesn't use PIN codes. (e.g. Danalock)

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SetTarget	newTargetValue	Target	Sets the target (desired) state of the door. Used to lock and unlock the door.
SetPin	UserCodeName	string	Adds a PIN code. This code will be added to the `PinCodes` variable and to the door lock. `UserCodeName` is the PIN code name. `newPin` is the new PIN code. `user` is the PIN code slot number. `purge`: if this is `1`, all the schedules programmed into the door lock will be removed. `json` is a json that looks like this: { "user_code" : { "slot" : "<pin_slot>", // Used when adding/updating a PIN code. "name" : "<name>", "code" : "<pin_code>", "user" : "<restriction_slot>" // Used when adding/updating restrictions. }, "weekly_schedules" : [ { "day_of_week" : "136" "from_time" : "12:34" "to_time" : "23:45" }, { "day_of_week" : "25" "from_time" : "13:46" "to_time" : "21:09" } ... ], "daily_schedules" : [ { "start_date" : "YYYY-MM-DD HH:MM:SS" "stop_date" : "YYYY-MM-DD HH:MM:SS" }, { "start_date" : "YYYY-MM-DD HH:MM:SS" "stop_date" : "YYYY-MM-DD HH:MM:SS" } ... ] } `slot` in `json` is equivalent to `user` `name` in `json` is equivalent to `UserCodeName` `code` in `json` is equivalent to `newPin` If the `json` parameter is present, `user`, `UserCodeName` and `newPin` are ignored. ^* The parameters from `SetPinValidityDate` and `SetPinValidityWeekly` are also accepted. Internally, this action calls the implementation functions of those actions if `StartDate`, respectively `DayOfWeek` parameters are given. The parameters in the `json` take precedence over the other parameters.
	newPin	ui4
	user	ui1
	purge	boolean
	json	string
	^* `SetPinValidityDate` parameters
	^* `SetPinValidityWeekly` parameters
SetPinValidityDate	UserCode	ui1	Sets the daily time interval in which a PIN code is valid. `UserCode` is the PIN code slot number. The starting slot number is 1. `StartDate` and `StopDate` are strings representing the dates, formatted like this: `YYYY-MM-DD HH:MM:SS` (SQL DATETIME) `Replace`: If this parameter is "1" the current restriction is replaced with the new one. Otherwise a new restriction is added, unless there are no more available restriction slots. Example: http://192.168.81.1:3480/data_request?id=action&DeviceNum=6&serviceId=urn:micasaverde-com:serviceId:DoorLock1&action=SetPinValidityDate&UserCode=1&StartDate=2012-09-03%2014:00:00&StopDate=2012-09-03%2015:00:00&Replace=1
	StartDate	string
	StopDate	string
	Replace	boolean
SetPinValidityWeekly	UserCode	ui1	Sets the weekly time interval in which a PIN code is valid. `UserCode` is the PIN code slot number. The starting slot number is 1. `DayOfWeek` contains the days of week numbers when the PIN code is restricted. Monday is '`1`' and Sunday is '`7`'. Example: `1367` means Monday, Wednesday, Saturday and Sunday. `StartHour` is the hour the restriction starts at. `StartMinute` is the minute the restriction starts at. `StopHour` is the hour the restriction stops at. `StopMinute` is the minute the restriction stops at. `Replace`: If this parameter is "1" the current restriction is replaced with the new one. Otherwise a new restriction is added, unless there are no more available restriction slots. Example: http://192.168.81.1:3480/data_request?id=action&DeviceNum=6&serviceId=urn:micasaverde-com:serviceId:DoorLock1&action=SetPinValidityWeekly&UserCode=1&DayOfWeek=1367&StartHour=15&StartMinute=31&StopHour=16&StopMinute=42&Replace=1
	DayOfWeek	ui4
	StartHour	ui1
	StartMinute	ui1
	StopHour	ui1
	StopMinute	ui1
	Replace	boolean
ClearPinValidity	UserCode	ui4	Clears the given restriction slot. `UserCode` is the PIN code slot number. The starting slot number is 1. `slotID` is the restriction slot number. The starting slot number is 1.
ClearPinValidity	slotID	ui4
ClearPin	UserCode	ui1	Removes the PIN code from slot `UserCode`.

HVAC_UserOperatingMode1

Service ID: urn:upnp-org:serviceId:HVAC_UserOperatingMode1
File: S_HVAC_UserOperatingMode1.xml

Variable	Type	Description
ModeTarget	string	The desired operating mode of the HVAC. Currently MiOS supports only: Off HeatOn CoolOn AutoChangeOver
ModeStatus	string	The actual operating mode of the HVAC.
EnergyModeTarget	string	The desired energy mode. Can be `Normal` or `EnergySavingsMode`.
EnergyModeStatus	string	The actual energy mode.
AutoMode	boolean	If specified, and if 0, the thermostat doesn't support auto mode.

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SetModeTarget	NewModeTarget	ModeTarget	Sets the desired HVAC operating mode.
SetEnergyModeTarget	NewModeTarget	EnergyModeTarget	Sets the desired energy mode.

HVAC_OperatingState1

Service ID: urn:micasaverde-com:serviceId:HVAC_OperatingState1
File: S_HVAC_OperatingState1.xml

Variable	Type	Description
ModeState	string	Represents what the HVAC is actually doing right now. The most common actions are: Idle Heating Cooling

HVAC_FanOperatingMode1

Service ID: urn:upnp-org:serviceId:HVAC_FanOperatingMode1
File: S_HVAC_FanOperatingMode1.xml

Variable	Type	Description
Mode	string	The fan operation mode. Can be: Auto ContinuousOn PeriodicOn
FanStatus	string	Represents the current fan state; can be On or Off.

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SetMode	NewMode	Mode	Sets the fan operating mode. Changes the Mode variable.

TemperatureSetpoint1

Service ID: urn:upnp-org:serviceId:TemperatureSetpoint1
File: S_TemperatureSetpoint1.xml

Variable	Type	Description
SetpointTarget	i4	The target temperature setpoint for the current thermostat mode.
CurrentSetpoint	i4	The actual temperature setpoint for the current thermostat mode.
AllSetpoints	string	A comma separated list containing the current setpoints for the following thermostat modes: heat, cool, auto. Format: `HEAT,COOL,AUTO` Example: `AllSetpoints = 72,74,73` 72 = heating setpoint 74 = cooling setpoint 73 = auto mode setpoint
AutoMode	i4	If specified, the thermostat doesn't support auto setpoint, so set heat+cool this many degrees +/-
ReportMode	char	"M" = The report correspond to the current mode of operation and should update the setpoint in the received mode (default), "S" = The report correspond to the current operating state and should update the setpoint in the current mode

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SetCurrentSetpoint	NewCurrentSetpoint	CurrentSetpoint	Sets the target setpoint.

TemperatureSensor1

Service ID: urn:upnp-org:serviceId:TemperatureSensor1
File: S_TemperatureSensor1.xml

Variable	Type	Description
CurrentTemperature	i4	-

GenericSensor1

Service ID: urn:micasaverde-com:serviceId:GenericSensor1
File: S_GenericSensor1.xml

Variable	Type	Description
CurrentLevel	i4	-

LightSensor1

Service ID: urn:micasaverde-com:serviceId:LightSensor1
File: S_LightSensor1.xml

Variable	Type	Description
CurrentLevel	i4	-

HumiditySensor1

Service ID: urn:micasaverde-com:serviceId:HumiditySensor1
File: S_HumiditySensor1.xml

Variable	Type	Description
CurrentLevel	i4	-

SecuritySensor1

Service ID: urn:micasaverde-com:serviceId:SecuritySensor1
File: S_SecuritySensor1.xml

Variable	Type	Description
Tripped	boolean	-
Armed	boolean	This is used by MiOS as a way to disable sending notifications when a sensor is tripped/untripped.
LastTrip	i4	This is the UNIX time when the sensor last reported that it was tripped.
IgnoreTripTime	i4	This is used to filter trip events, the value specify the time in seconds of the filter, internally it will record the last event and after the time has elapsed it will set the variable Tripped to the last known event recorded.
AutoUntrip	i4	This is used for those devices that doesn't send the Untrip command and requires to automatically untrip after certain time. The value correspond to the time in seconds that the controller will set the Tripped variable to 0 after a Trip event. To disable this feature, set the variable to 0 or remove it from the device.

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SetArmed	newArmedValue	Armed	Arms or disarms the sensor.

EnergyMetering1

Service ID: urn:micasaverde-com:serviceId:EnergyMetering1
File: S_EnergyMetering1.xml

Variable	Type	Description
Watts	ui4	If the device can report its wattage, this is the value reported by the device, otherwise this is the value supplied by the user in `UserSupliedWattage`.
Pulse	ui4	-
UserSuppliedWattage	ui4	See `Watts`. Note: For thermostats, `UserSuppliedWattage` consists of 3 numbers separated by commas. The default is 1500,1500,300. The first number is how many watts are used when the thermostat is in 'heat' mode; the second is how many watts are used when the thermostat is in 'cool' mode; and the third number is for the 'fan only' mode.
KWH	ui4	-
Log	string	Comma separated list of values: `CurrentConsumption,Average,Peak,LastReading,Seconds` LastReading is the Unix time. Seconds is the period of time the Average value was computed for.

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
ResetKWH	none		-

IrTransmitter1

Service ID: urn:micasaverde-com:serviceId:IrTransmitter1
File: S_IrTransmitter1.xml

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SendProntoCode	ProntoCode	string	Sends the given IR code.

SerialPort1

Service ID: urn:micasaverde-org:serviceId:SerialPort1
File: S_SerialPort1.xml

Variable	Type	Description
path	string	The path of the serial port. On Vera Lite it's `/dev/ttyUSB0`
baud	ui4	The baud rate.
stopbits	ui1	The number of stop bits.
databits	ui1	The number of data bits.
parity	string	Can be `odd` or `even`.

SceneController1

Service ID: urn:micasaverde-com:serviceId:SceneController1
File: S_SceneController1.xml

Variable	Type	Description
sl_SceneActivated	ui2	The number of the activated scene on the scene controller.
sl_SceneDeactivated	ui2	The number of the deactivated scene on the scene controller.
Scenes	string	?
LastSceneID	string	The scene ID (as reported by the scene controller) of the last activated or deactivated scene.
LastSceneTime	ui4	The UNIX time when the scene was last activated or deactivated.
ManageLeds	boolean	If this is "1", automatically turn on/off the scene indicator lights.
NumButtons	string	This variable has the following format: `NumberOfButtons[,ButtonNumber-AssociationNumber-SceneNumber=ButtonName[,ButtonNumber-AssociationNumber-SceneNumber=ButtonName[,etc.]]]` Where: ButtonNumber must be from 1 to NumberOfButtons. AssociationNumber is the association group. SceneNumber is an event ID, and it's sent instead of the one we program. ButtonName is the user friendly name of the button. Example: `2,1-1-1=Tap Button,2-2-2=Hold Button`
ButtonMapping	string	This variable has the following format: `OldButtonNumber-Attribute-NewButtonNumber[,OldButtonNumber-Attribute-NewButtonNumber[,etc.]]` Where Attribute has the following meaning: 0 = Key pressed 1 = Key is released, sent only as a termination of a Key Held Down sequence 2 = Key held down 3 = Key double tapped ¹ 4 = Key triple tapped ¹ ¹ These attributes were added in COMMAND_CLASS_CENTRAL_SCENE V2, so it's not available on all the scene controllers. Example: `1-0-1,1-3-2,2-0-3,2-3-4,3-0-5,3-3-6,4-0-7,4-3-8`
SceneShortcuts	string	?
FiresOffEvents	boolean	?
ActivationMethod	ui1	Z-Wave stuff.

SceneControllerLED1

Service ID: urn:micasaverde-com:serviceId:SceneControllerLED1
File: S_SceneControllerLED1.xml

Variable	Type	Description
LightSettings	ui1	The lights' state. The lower 4 bits of `LightSettings` are the 4 green LEDs, and the upper 4 are the 4 red LEDs. So, 10001 is an orange light, 110010 is an orange light and a red, etc.

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SetLight	newValue	ui4	Change a light's state. `newValue` is the new light state. The valid values are: 0 = off 1 = green 2 = red 3 = orange `Indicator` is the button number.
SetLight	Indicator	ui4

IrDevice1

Service ID: urn:micasaverde-com:serviceId:IrDevice1
File: S_IrDevice1.xml

Variable	Type	Description
Codesets	string
Codeset	string
Remote	int
Scene	string

Action	Arguments		Description
Action	Name	Type or Related Variable	Description
SendCode	Codeset	Codeset
	Button	Remote
	Repeat	Remote

Color1

Service ID: urn:micasaverde-com:serviceId:Color1
File: S_Color1.xml

Variable	Type	Description
CurrentColor	string
TargetColor	string
ColorMode	string	Currently used only for Revogi. Can have only 2 values: 0 = Colorful mode 1 = Color temperature mode
ColorChannelPriorities	string	Specify the color channel priorities like this: 0>1>2,3,4 That value can be interpretted like this: channel 0 has priority over channel 1, which has priority over channels 2, 3 and 4.
SupportedColors	string

Luup UPnP Variables and Actions

Revision as of 14:46, 20 April 2017

Contents

HomeAutomationGateway1

HaDevice1

ZWaveDevice1

ZWaveNetwork1

USBUIRT1

Camera1

PanTiltZoom1

SwitchPower1

WindowCovering1

Dimming1

DoorLock1

HVAC_UserOperatingMode1

HVAC_OperatingState1

HVAC_FanOperatingMode1

TemperatureSetpoint1

TemperatureSensor1

GenericSensor1

LightSensor1

HumiditySensor1

SecuritySensor1

EnergyMetering1

IrTransmitter1

SerialPort1

SceneController1

SceneControllerLED1

IrDevice1

Color1

Views

Personal tools

Navigation

Search

Toolbox

@@ Line 4: / Line 4: @@
 == HomeAutomationGateway1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:HomeAutomationGateway1
-* '''File''': S_HomeAutomationGateway1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:HomeAutomationGateway1
+*'''File''': S_HomeAutomationGateway1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | DataVersion
- | style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | A number that increases each time the data changes.
- |-
- | style="border: 1px solid #000" | UDN
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The Unique Device Name of the UPnP device.
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
-  ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+|-
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+! style="border: 1px solid #000;  width: 150px" | Variable
- ! style="border: 1px solid #000"               rowspan="2" | Description
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description<br/>
- ! style="border: 1px solid #000; width: 130px"             | Name
+|-
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+| style="border: 1px solid #000" | DataVersion
- |-
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" rowspan="1" | Reload
+| style="border: 1px solid #000" | A number that increases each time the data changes.
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
+|-
- | style="border: 1px solid #000" rowspan="1" | Reload the LuaUPnP engine.
+| style="border: 1px solid #000" | UDN
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" rowspan="3" | ModifyUserData
+| style="border: 1px solid #000" | The Unique Device Name of the UPnP device.
- | style="border: 1px solid #000" | inUserData
+|}
- | style="border: 1px solid #000" | UserData
- | style="border: 1px solid #000" rowspan="3" | Make changes to the UserData.
-* <tt>inUserData</tt> is the new UserData object which will be added to the UserData or will replace an existent UserData object.
-* <tt>DataFormat</tt> must be ''json''.
+{| style="border: 1px solid #000;  border-collapse: collapse"
-* If <tt>Reload</tt> is ''1'' the LuaUPnP engine will reload after the UserData is modified.
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | Reload
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000" rowspan="1" | Reload the LuaUPnP engine.
+|-
+| style="border: 1px solid #000" rowspan="3" | ModifyUserData
+| style="border: 1px solid #000" | inUserData
+| style="border: 1px solid #000" | UserData
+| style="border: 1px solid #000" rowspan="3" | Make changes to the UserData.
+*<tt>inUserData</tt> is the new UserData object which will be added to the UserData or will replace an existent UserData object.
+*<tt>DataFormat</tt> must be ''json''.
+*If <tt>Reload</tt> is ''1'' the LuaUPnP engine will reload after the UserData is modified.
 For more information read the [[ModifyUserData]] page.
- |-
- | style="border: 1px solid #000" | DataFormat
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | DataFormat
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Reload
+|-
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | Reload
- |-
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" rowspan="4" | SetVariable
+|-
- | style="border: 1px solid #000" | DeviceNum
+| style="border: 1px solid #000" rowspan="4" | SetVariable
- | style="border: 1px solid #000" | int or string
+| style="border: 1px solid #000" | DeviceNum
- | style="border: 1px solid #000" rowspan="4" | Create or change the value of a variable.
+| style="border: 1px solid #000" | int or string
-* <tt>DeviceNum</tt> can be an UDN or a number.
+| style="border: 1px solid #000" rowspan="4" | Create or change the value of a variable.
-* <tt>Service</tt> is the service ID of the variable.
+*<tt>DeviceNum</tt> can be an UDN or a number.
-* <tt>Variable</tt> is the variable name.
+*<tt>Service</tt> is the service ID of the variable.
-* <tt>Value</tt> is the new variable value.
+*<tt>Variable</tt> is the variable name.
- |-
+*<tt>Value</tt> is the new variable value.
- | style="border: 1px solid #000" | Service
- | style="border: 1px solid #000" | string
+|-
- |-
+| style="border: 1px solid #000" | Service
- | style="border: 1px solid #000" | Variable
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | string
+|-
- |-
+| style="border: 1px solid #000" | Variable
- | style="border: 1px solid #000" | Value
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | string
+|-
- |-
+| style="border: 1px solid #000" | Value
- | style="border: 1px solid #000" rowspan="1" | RunScene
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | SceneNum
+|-
- | style="border: 1px solid #000" | int
+| style="border: 1px solid #000" rowspan="1" | RunScene
- | style="border: 1px solid #000" rowspan="1" | Run the given scene.
+| style="border: 1px solid #000" | SceneNum
- |-
+| style="border: 1px solid #000" | int
- | style="border: 1px solid #000" rowspan="1" | SceneOff
+| style="border: 1px solid #000" rowspan="1" | Run the given scene.
- | style="border: 1px solid #000" | SceneNum
+|-
- | style="border: 1px solid #000" | int
+| style="border: 1px solid #000" rowspan="1" | SceneOff
- | style="border: 1px solid #000" rowspan="1" | Turn off all the devices from DEVICE_CATEGORY_DIMMABLE_LIGHT and DEVICE_CATEGORY_SWITCH from the given scene.
+| style="border: 1px solid #000" | SceneNum
- |-
+| style="border: 1px solid #000" | int
- | style="border: 1px solid #000" rowspan="2" | RunLua
+| style="border: 1px solid #000" rowspan="1" | Turn off all the devices from DEVICE_CATEGORY_DIMMABLE_LIGHT and DEVICE_CATEGORY_SWITCH from the given scene.
- | style="border: 1px solid #000" | DeviceNum
+|-
- | style="border: 1px solid #000" | int or string
+| style="border: 1px solid #000" rowspan="2" | RunLua
- | style="border: 1px solid #000" rowspan="2" | Run the given Lua code. If <tt>DeviceNum</tt> is specified, the code is run using that device's interface.
+| style="border: 1px solid #000" | DeviceNum
- |-
+| style="border: 1px solid #000" | int or string
- | style="border: 1px solid #000" | Code
+| style="border: 1px solid #000" rowspan="2" | Run the given Lua code. If <tt>DeviceNum</tt> is specified, the code is run using that device's interface.
- | style="border: 1px solid #000" | string
+|-
- |-
+| style="border: 1px solid #000" | Code
- | style="border: 1px solid #000" rowspan="14" | CreateDevice
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | deviceType
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" rowspan="14" | CreateDevice
- | style="border: 1px solid #000" rowspan="14" | Create a device using the given parameters.
+| style="border: 1px solid #000" | deviceType
-* <tt>deviceType</tt> is the UPnP device type.
+| style="border: 1px solid #000" | string
-* <tt>internalID</tt> is the specific ID (also known as ''altid'') of the device; for example, for Z-Wave devices this is the Node ID, and for Insteon device it is the Insteon ID.
+| style="border: 1px solid #000" rowspan="14" | Create a device using the given parameters.
-* <tt>Description</tt> is the device name, which is shown to the user on the dashboard.
+*<tt>deviceType</tt> is the UPnP device type.
-* <tt>UpnpDevFilename</tt> is the UPnP device description file name.
+*<tt>internalID</tt> is the specific ID (also known as ''altid'') of the device; for example, for Z-Wave devices this is the Node ID, and for Insteon device it is the Insteon ID.
-* <tt>UpnpImplFilename</tt> is the implementation file to use.
+*<tt>Description</tt> is the device name, which is shown to the user on the dashboard.
-* If the device is IP based, <tt>IpAddress</tt> is the IP address and port of the device.
+*<tt>UpnpDevFilename</tt> is the UPnP device description file name.
-* If this should be the child of another device, <tt>DeviceNumParent</tt> is the device number of the parent device.
+*<tt>UpnpImplFilename</tt> is the implementation file to use.
-* <tt>RoomNum</tt> is the number of the room the device will be in.
+*If the device is IP based, <tt>IpAddress</tt> is the IP address and port of the device.
-* <tt>PluginNum</tt> tells the device which plugin to use. The plugin will be installed automatically if it's not already installed.
+*If this should be the child of another device, <tt>DeviceNumParent</tt> is the device number of the parent device.
-* <tt>StateVariables</tt> is a string containing the variables you want set when the device is created. You can specify multiple variables by separating them with a line feed ('\n'), and use ',' and '=' to separate service, variable and value, like this: <tt>service,variable=value\nservice,variable=value\n</tt>...
+*<tt>RoomNum</tt> is the number of the room the device will be in.
-* If <tt>Reload</tt> is '''1''', the Luup engine will be restarted after the device is created.
+*<tt>PluginNum</tt> tells the device which plugin to use. The plugin will be installed automatically if it's not already installed.
- |-
+*<tt>StateVariables</tt> is a string containing the variables you want set when the device is created. You can specify multiple variables by separating them with a line feed ('\n'), and use ',' and '=' to separate service, variable and value, like this: <tt>service,variable=value\nservice,variable=value\n</tt>...
- | style="border: 1px solid #000" | internalID
+*If <tt>Reload</tt> is '''1''', the Luup engine will be restarted after the device is created.
- | style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | Description
+| style="border: 1px solid #000" | internalID
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | UpnpDevFilename
+| style="border: 1px solid #000" | Description
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | UpnpImplFilename
+| style="border: 1px solid #000" | UpnpDevFilename
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | IpAddress
+| style="border: 1px solid #000" | UpnpImplFilename
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | MacAddress
+| style="border: 1px solid #000" | IpAddress
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | Username
+| style="border: 1px solid #000" | MacAddress
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | Password
+| style="border: 1px solid #000" | Username
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | DeviceNumParent
+| style="border: 1px solid #000" | Password
- | style="border: 1px solid #000" | int
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | RoomNum
+| style="border: 1px solid #000" | DeviceNumParent
- | style="border: 1px solid #000" | int
+| style="border: 1px solid #000" | int
- |-
+|-
- | style="border: 1px solid #000" | PluginNum
+| style="border: 1px solid #000" | RoomNum
- | style="border: 1px solid #000" | int
+| style="border: 1px solid #000" | int
- |-
+|-
- | style="border: 1px solid #000" | StateVariables
+| style="border: 1px solid #000" | PluginNum
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | int
- |-
+|-
- | style="border: 1px solid #000" | Reload
+| style="border: 1px solid #000" | StateVariables
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" rowspan="2" | DeleteDevice
+| style="border: 1px solid #000" | Reload
- | style="border: 1px solid #000" | DeviceNum
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | int
+|-
- | style="border: 1px solid #000" rowspan="2" | Delete the device given either through its number, or through its UDN.
+| style="border: 1px solid #000" rowspan="2" | DeleteDevice
- |-
+| style="border: 1px solid #000" | DeviceNum
- | style="border: 1px solid #000" | UDN
+| style="border: 1px solid #000" | int
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" rowspan="2" | Delete the device given either through its number, or through its UDN.
- |-
+|-
- | style="border: 1px solid #000" rowspan="3" | CreatePlugin
+| style="border: 1px solid #000" | UDN
- | style="border: 1px solid #000" | PluginNum
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | int
+|-
- | style="border: 1px solid #000" rowspan="3" | Create a plugin with the <tt>PluginNum</tt> number and <tt>Version</tt> version. <tt>StateVariables</tt> are the variables that will be set when the device is created. For more information look at the description of the '''CreateDevice''' action above.
+| style="border: 1px solid #000" rowspan="3" | CreatePlugin
- |-
+| style="border: 1px solid #000" | PluginNum
- | style="border: 1px solid #000" | Version
+| style="border: 1px solid #000" | int
- | style="border: 1px solid #000" | int
+| style="border: 1px solid #000" rowspan="3" | Create a plugin with the <tt>PluginNum</tt> number and <tt>Version</tt> version. <tt>StateVariables</tt> are the variables that will be set when the device is created. For more information look at the description of the '''CreateDevice''' action above.
- |-
+|-
- | style="border: 1px solid #000" | StateVariables
+| style="border: 1px solid #000" | Version
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | int
- |-
+|-
- | style="border: 1px solid #000" rowspan="1" | DeletePlugin
+| style="border: 1px solid #000" | StateVariables
- | style="border: 1px solid #000" | PluginNum
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | int
+|-
- | style="border: 1px solid #000" rowspan="1" | Uninstall the given plugin.
+| style="border: 1px solid #000" rowspan="1" | DeletePlugin
- |-
+| style="border: 1px solid #000" | PluginNum
- | style="border: 1px solid #000" rowspan="2" | CreatePluginDevice
+| style="border: 1px solid #000" | int
- | style="border: 1px solid #000" | PluginNum
+| style="border: 1px solid #000" rowspan="1" | Uninstall the given plugin.
- | style="border: 1px solid #000" | int
+|-
- | style="border: 1px solid #000" rowspan="2" | Creates a device for plugin #<tt>PluginNum</tt>.
+| style="border: 1px solid #000" rowspan="2" | CreatePluginDevice
- |-
+| style="border: 1px solid #000" | PluginNum
- | style="border: 1px solid #000" | StateVariables
+| style="border: 1px solid #000" | int
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" rowspan="2" | Creates a device for plugin #<tt>PluginNum</tt>.
- |-
+|-
- | style="border: 1px solid #000" rowspan="2" | ImportUpnpDevice
+| style="border: 1px solid #000" | StateVariables
- | style="border: 1px solid #000" | UDN
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | UDN
+|-
- | style="border: 1px solid #000" rowspan="2" |
+| style="border: 1px solid #000" rowspan="2" | ImportUpnpDevice
- |-
+| style="border: 1px solid #000" | UDN
- | style="border: 1px solid #000" | RoomNum
+| style="border: 1px solid #000" | UDN
- | style="border: 1px solid #000" | DeviceNum
+| style="border: 1px solid #000" rowspan="2" |
- |-
+|-
- | style="border: 1px solid #000" rowspan="2" | LogIpRequest
+| style="border: 1px solid #000" | RoomNum
- | style="border: 1px solid #000" | IpAddress
+| style="border: 1px solid #000" | DeviceNum
- | style="border: 1px solid #000" | UDN
+|-
- | style="border: 1px solid #000" rowspan="2" |
+| style="border: 1px solid #000" rowspan="2" | LogIpRequest
- |-
+| style="border: 1px solid #000" | IpAddress
- | style="border: 1px solid #000" | MacAddress
+| style="border: 1px solid #000" | UDN
- | style="border: 1px solid #000" | UDN
+| style="border: 1px solid #000" rowspan="2" |
- |-
+|-
- | style="border: 1px solid #000" | SetHouseMode
+| style="border: 1px solid #000" | MacAddress
- | style="border: 1px solid #000" | Mode
+| style="border: 1px solid #000" | UDN
- | style="border: 1px solid #000" | int
+|-
- | style="border: 1px solid #000" | Changes the house mode.
+| style="border: 1px solid #000" | SetHouseMode
+| style="border: 1px solid #000" | Mode
+| style="border: 1px solid #000" | int
+| style="border: 1px solid #000" | Changes the house mode.
 <tt>Mode</tt> can be:
-* <tt>1</tt> = Home
-* <tt>2</tt> = Away
+*<tt>1</tt> = Home
-* <tt>3</tt> = Night
+*<tt>2</tt> = Away
-* <tt>4</tt> = Vacation
+*<tt>3</tt> = Night
- |}
+*<tt>4</tt> = Vacation
-<br />
+|}
 == HaDevice1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:HaDevice1
-* '''File''': S_HaDevice1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:HaDevice1
+*'''File''': S_HaDevice1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
+{| style="border: 1px solid #000;  border-collapse: collapse"
- ! style="border: 1px solid #000"               | Description
+|-
- |-
+! style="border: 1px solid #000;  width: 150px" | Variable
- | style="border: 1px solid #000" | CommFailure
+! style="border: 1px solid #000;  width: 60px" | Type
- | style="border: 1px solid #000" | boolean
+! style="border: 1px solid #000" | Description
- | style="border: 1px solid #000" | This is set to ''1'' if we've lost communication with the device.
+|-
- |-
+| style="border: 1px solid #000" | CommFailure
- | style="border: 1px solid #000" | Configured
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | This is set to ''1'' if we've lost communication with the device.
- | style="border: 1px solid #000" | The configuration state of the device:
+|-
-* -3 = Configuration failed
+| style="border: 1px solid #000" | Configured
-* -2 = Configuration in progress
+| style="border: 1px solid #000" | boolean
-* -1 = Device waiting to be configured
+| style="border: 1px solid #000" | The configuration state of the device:
-*  0 = Device not configured
+*-3 = Configuration failed
-*  1 = Device successfully configured
+*-2 = Configuration in progress
-*  2 = Device partially configured
+*-1 = Device waiting to be configured
- |-
+*0 = Device not configured
- | style="border: 1px solid #000" | AutoConfigure
+*1 = Device successfully configured
- | style="border: 1px solid #000" | boolean
+*2 = Device partially configured
- | style="border: 1px solid #000" | If this is "1", MiOS will automatically check the routing info for this every 12 hours.
- |-
+|-
- | style="border: 1px solid #000" | BatteryLevel
+| style="border: 1px solid #000" | AutoConfigure
- | style="border: 1px solid #000" | i1
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | The battery level reported by the device.
+| style="border: 1px solid #000" | If this is "1", MiOS will automatically check the routing info for this every 12 hours.
- |-
+|-
- | style="border: 1px solid #000" | BatteryDate
+| style="border: 1px solid #000" | BatteryLevel
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | i1
- | style="border: 1px solid #000" | The UNIX time when the <tt>BatteryLevel</tt> was reported.
+| style="border: 1px solid #000" | The battery level reported by the device.
- |-
+|-
- | style="border: 1px solid #000" | LastTimeCheck
+| style="border: 1px solid #000" | BatteryDate
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | Only for devices that are capable of implementing time, this is when the time was last checked.
+| style="border: 1px solid #000" | The UNIX time when the <tt>BatteryLevel</tt> was reported.
- |-
+|-
- | style="border: 1px solid #000" | LastTimeOffset
+| style="border: 1px solid #000" | LastTimeCheck
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | For <tt>LastTimeCheck</tt>, this is the timezone offset from UTC when the time was last checked.
+| style="border: 1px solid #000" | Only for devices that are capable of implementing time, this is when the time was last checked.
- |-
+|-
- | style="border: 1px solid #000" | LastUpdate
+| style="border: 1px solid #000" | LastTimeOffset
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | This is when the device information was last updated. (Mostly used for Z-Wave devices)
+| style="border: 1px solid #000" | For <tt>LastTimeCheck</tt>, this is the timezone offset from UTC when the time was last checked.
- |-
+|-
- | style="border: 1px solid #000" | FirstConfigured
+| style="border: 1px solid #000" | LastUpdate
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | This is when the device was first configured. (Mostly used for Z-Wave devices)
+| style="border: 1px solid #000" | This is when the device information was last updated. (Mostly used for Z-Wave devices)
- |-
+|-
- | style="border: 1px solid #000" | IgnoreRoom
+| style="border: 1px solid #000" | FirstConfigured
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | Used only by the MiOS scene controller. Internal stuff.
+| style="border: 1px solid #000" | This is when the device was first configured. (Mostly used for Z-Wave devices)
- |-
+|-
- | style="border: 1px solid #000" | Commands
+| style="border: 1px solid #000" | IgnoreRoom
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | This is a comma separated list of <tt>ControlCodes</tt> for the enabled UI controls. If the <tt>ControlCode</tt> of an UI control (e.g. button) is not in this list, the button will be disabled (greyed out). If this variable is missing, all controls will be enabled. If this variable is empty, all controls will be disabled.
+| style="border: 1px solid #000" | Used only by the MiOS scene controller. Internal stuff.
- |-
+|-
- | style="border: 1px solid #000" | IODevice
+| style="border: 1px solid #000" | Commands
- | style="border: 1px solid #000" | ui2
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The device number to connect to for IO. (this is on the master device)
+| style="border: 1px solid #000" | This is a comma separated list of <tt>ControlCodes</tt> for the enabled UI controls. If the <tt>ControlCode</tt> of an UI control (e.g. button) is not in this list, the button will be disabled (greyed out). If this variable is missing, all controls will be enabled. If this variable is empty, all controls will be disabled.
- |-
+|-
- | style="border: 1px solid #000" | IOPort
+| style="border: 1px solid #000" | IODevice
- | style="border: 1px solid #000" | ui2
+| style="border: 1px solid #000" | ui2
- | style="border: 1px solid #000" | The port to receive connections on from <tt>IODevice</tt>. (this is on the serial port)
+| style="border: 1px solid #000" | The device number to connect to for IO. (this is on the master device)
- |-
+|-
- | style="border: 1px solid #000" | ReverseOnOff
+| style="border: 1px solid #000" | IOPort
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | ui2
- | style="border: 1px solid #000" | If this is "1", the commands for some devices are reversed (e.g. the On command will turn the device Off, and vice versa). Not all devices support this.
+| style="border: 1px solid #000" | The port to receive connections on from <tt>IODevice</tt>. (this is on the serial port)
- |-
+|-
- | style="border: 1px solid #000" | sl_Alarm
+| style="border: 1px solid #000" | ReverseOnOff
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | Currently used only by the water leak sensor, contains the alarm code.
+| style="border: 1px solid #000" | If this is "1", the commands for some devices are reversed (e.g. the On command will turn the device Off, and vice versa). Not all devices support this.
- |-
+|-
- | style="border: 1px solid #000" | ModeSetting
+| style="border: 1px solid #000" | sl_Alarm
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Contains the state of the device for each house mode.
+| style="border: 1px solid #000" | Currently used only by the water leak sensor, contains the alarm code.
+|-
+| style="border: 1px solid #000" | ModeSetting
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Contains the state of the device for each house mode.
 The format is:
   <house mode>:<state>;<house mode>:<state>;...
-* If <tt>state</tt> is empty, the sensor is disarmed/bypassed.
-* If <tt>state</tt> is "A", the sensor is armed.
+*If <tt>state</tt> is empty, the sensor is disarmed/bypassed.
+*If <tt>state</tt> is "A", the sensor is armed.
 Example:
 :;2:A;3:A;4:A
-* In <tt>Home</tt>(1) mode the sensor is disarmed;
-* in <tt>Away</tt>(2), <tt>Night</tt>(3) and <tt>Vacation</tt>(4) modes the sensor is armed.
+*In <tt>Home</tt>(1) mode the sensor is disarmed;
- |-
+*in <tt>Away</tt>(2), <tt>Night</tt>(3) and <tt>Vacation</tt>(4) modes the sensor is armed.
- | style="border: 1px solid #000" | Children
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | This is a comma separated list of KitDevice numbers.
+| style="border: 1px solid #000" | Children
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This is a comma separated list of KitDevice numbers.
 LuaUPnP will create a child device for every item in the list, with the specified KitDevice properties.
 Can be used to add children to devices which don't have MultiChannel support.
- |-
- | style="border: 1px solid #000" | PollRatings
+|-
- | style="border: 1px solid #000" | double
+| style="border: 1px solid #000" | PollRatings
- | style="border: 1px solid #000" | This is a measure of how well the polls are doing, where 5.0 means that the last 50 polls were successful and 0.0 means that all the last 50 polls were unsuccessful.
+| style="border: 1px solid #000" | double
- |-
+| style="border: 1px solid #000" | This is a measure of how well the polls are doing, where 5.0 means that the last 50 polls were successful and 0.0 means that all the last 50 polls were unsuccessful.
- | style="border: 1px solid #000" | WakeupRatings
+|-
- | style="border: 1px solid #000" | double
+| style="border: 1px solid #000" | WakeupRatings
- | style="border: 1px solid #000" | This is a measure of how well the wakeups are being received, where 5.0 means that the we received the last 50 wakeups when they have suppose to be sent and 0.0 means that we didn't receive any of the 50 last wakeups that the device should have sent
+| style="border: 1px solid #000" | double
- |-
+| style="border: 1px solid #000" | This is a measure of how well the wakeups are being received, where 5.0 means that the we received the last 50 wakeups when they have suppose to be sent and 0.0 means that we didn't receive any of the 50 last wakeups that the device should have sent
- | style="border: 1px solid #000" | AlarmTypes
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | AlarmTypes
- | style="border: 1px solid #000" | '''See the description of this variable in ZWaveDevice1 section, because it should belong to the service urn:micasaverde-com:serviceId:ZWaveDevice1, but it was kept in urn:micasaverde-com:serviceId:HaDevice1 to maintain backward compatibility.'''
+| style="border: 1px solid #000" | string
- |-
+| style="border: 1px solid #000" | '''See the description of this variable in ZWaveDevice1 section, because it should belong to the service urn:micasaverde-com:serviceId:ZWaveDevice1, but it was kept in urn:micasaverde-com:serviceId:HaDevice1 to maintain backward compatibility.'''
- | style="border: 1px solid #000" | CustomModeConfiguration
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | CustomModeConfiguration
- | style="border: 1px solid #000" | Implementation of custom preset modes for any device.
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Implementation of custom preset modes for any device.
 Format:
-  <mode code>;<mode name>;<upnp_action>[|<mode code>;<mode name>;<upnp_action>]
+  <mode code>;<mode name>;<upnp_action>[&#124;<mode code>;<mode name>;<upnp_action>]
 where:
-* <tt><upnp_action></tt> = <code><service>/<action>/<parameters></code>
-* <tt><parameters></tt> = <code><paramName>=<value>[&<paramName>=<value>]</code>
-If the value is '?', it means that it's a wildcard and the ''ModeSettings'' variable should contain a comma separated list of values in order to substitute this '?' wildcard.
+*<tt>&lt;upnp_action&gt;</tt> = <code>&lt;service&gt;/&lt;action&gt;/&lt;parameters&gt;</code>
-If the value is not '?', then the value is fixed and it should be URL encoded.
+*<tt>&lt;parameters&gt;</tt> = <code>&lt;paramName&gt;=&lt;value&gt;[&&lt;paramName&gt;=&lt;value&gt;]</code>
+If the value is '?', it means that it's a wildcard and the ''ModeSettings'' variable should contain a comma separated list of values in order to substitute this '?' wildcard. If the value is not '?', then the value is fixed and it should be URL encoded.
 Example:
-  h;h code;urn:upnp-org:serviceId:SwitchPower1/SetTarget/newTargetValue=?&otherParameter=45&another=?|s;s code;urn:upnp-org:serviceId:Dimming1/SetTargetLevel/newLevel=34&other=?&another=4
- |-
+  h;h code;urn:upnp-org:serviceId:SwitchPower1/SetTarget/newTargetValue=?&otherParameter=45&another=?&#124;s;s code;urn:upnp-org:serviceId:Dimming1/SetTargetLevel/newLevel=34&other=?&another=4
- | style="border: 1px solid #000" | CustomModeControls
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | Used to tell the UI what controls to show in the House modes configuration page for the actions in the ''CustomModeConfiguration'' variable.
+| style="border: 1px solid #000" | CustomModeControls
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Used to tell the UI what controls to show in the House modes configuration page for the actions in the ''CustomModeConfiguration'' variable.
 Format:
-  <mode>:<control info for arg #1>;<control info for arg #2>;..;<control info for arg #N>[|<mode>:<control info for arg #1>]
-  |}
+  <mode>:<control info for arg #1>;<control info for arg #2>;..;<control info for arg #N>[&#124;<mode>:<control info for arg #1>]
+|}
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | Reconfigure
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000" rowspan="1" | Reconfigure the device.
+|-
+| style="border: 1px solid #000" rowspan="1" | StressTest
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000" rowspan="1" | Stress test the Z-Wave device.
+|-
+| style="border: 1px solid #000" rowspan="1" | Remove
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000" rowspan="1" | Remove the device from the Z-Wave network.
+|-
+| style="border: 1px solid #000" rowspan="1" | Poll
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000" rowspan="1" | Poll the device.
+|-
+| style="border: 1px solid #000" rowspan="1" | ToggleState
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000" rowspan="1" | Toggle the state of the device (e.g. if the device it's Off, turns it On). The device must have a binary state (On/Off, Locked/Unlocked, etc.).
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
- ! style="border: 1px solid #000"               colspan="2" | Arguments
- ! style="border: 1px solid #000"               rowspan="2" | Description
- |-
- ! style="border: 1px solid #000; width: 130px"             | Name
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
- |-
- | style="border: 1px solid #000" rowspan="1" | Reconfigure
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000" rowspan="1" | Reconfigure the device.
- |-
- | style="border: 1px solid #000" rowspan="1" | StressTest
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000" rowspan="1" | Stress test the Z-Wave device.
- |-
- | style="border: 1px solid #000" rowspan="1" | Remove
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000" rowspan="1" | Remove the device from the Z-Wave network.
- |-
- | style="border: 1px solid #000" rowspan="1" | Poll
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000" rowspan="1" | Poll the device.
- |-
- | style="border: 1px solid #000" rowspan="1" | ToggleState
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000" rowspan="1" | Toggle the state of the device (e.g. if the device it's Off, turns it On). The device must have a binary state (On/Off, Locked/Unlocked, etc.).
- |}
-<br />
 == ZWaveDevice1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:ZWaveDevice1
-* '''File''': S_ZWaveDevice1.xml ''(nonexistent)''
+*'''Service ID''': urn:micasaverde-com:serviceId:ZWaveDevice1
+*'''File''': S_ZWaveDevice1.xml ''(nonexistent)''
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
+{| style="border: 1px solid #000;  border-collapse: collapse"
- ! style="border: 1px solid #000"               | Description
+|-
- |-
+! style="border: 1px solid #000;  width: 150px" | Variable
- | style="border: 1px solid #000" | PollSettings
+! style="border: 1px solid #000;  width: 60px" | Type
- | style="border: 1px solid #000" | ui4
+! style="border: 1px solid #000" | Description
- | style="border: 1px solid #000" | This is the polling frequency for a node (i.e. the minimum number of seconds between two poll commands to the same node). If this variable doesn't exist or is blank, the default polling frequency set in the <tt>ZWaveNetwork1</tt>'s <tt>PollFrequency</tt> variable will be used. If it's '''0''', polling will be disabled for this node.
+|-
- |-
+| style="border: 1px solid #000" | PollSettings
- | style="border: 1px solid #000" | PollCommands
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This is the polling frequency for a node (i.e. the minimum number of seconds between two poll commands to the same node). If this variable doesn't exist or is blank, the default polling frequency set in the <tt>ZWaveNetwork1</tt>'s <tt>PollFrequency</tt> variable will be used. If it's '''0''', polling will be disabled for this node.
- | style="border: 1px solid #000" | A comma-separated list of command classes/commands to poll. '<tt>X</tt>' means the device won't respond to any poll.
+|-
- |-
+| style="border: 1px solid #000" | PollCommands
- | style="border: 1px solid #000" | MultiChEndpoint
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | A comma-separated list of command classes/commands to poll. '<tt>X</tt>' means the device won't respond to any poll.
- | style="border: 1px solid #000" | Internal stuff.
+|-
- |-
+| style="border: 1px solid #000" | MultiChEndpoint
- | style="border: 1px solid #000" | MultiChCapabilities
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Internal stuff.
- | style="border: 1px solid #000" | Internal stuff.
+|-
- |-
+| style="border: 1px solid #000" | MultiChCapabilities
- | style="border: 1px solid #000" | Neighbors
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Internal stuff.
- | style="border: 1px solid #000" | This is a comma-separated list of the neighbor devices' node IDs. '1' is the Vera's node ID.
+|-
- |-
+| style="border: 1px solid #000" | Neighbors
- | style="border: 1px solid #000" | NeighborsInverse
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This is a comma-separated list of the neighbor devices' node IDs. '1' is the Vera's node ID.
- | style="border: 1px solid #000" | This is a comma-separated list of the neighbors that see us.
+|-
- |-
+| style="border: 1px solid #000" | NeighborsInverse
- | style="border: 1px solid #000" | Capabilities
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This is a comma-separated list of the neighbors that see us.
- | style="border: 1px solid #000" | The first 6 numbers in <tt>Capabilities</tt> are what is reported by the <tt>ZW_GetNodeProtocolInfo</tt> function: Capability, Security, Reserved, Basic Device Class [, Generic Device Class, Specific Device Class]. If the <tt>Capability</tt> is >= 128, then the device listens for commands, otherwise it's a battery operated device that only wakes up occasionally. After the '|' in <tt>Capabilities</tt> are the command classes supported. More information here: [[ZWave_Command_Classes]]
+|-
- |-
+| style="border: 1px solid #000" | Capabilities
- | style="border: 1px solid #000" | SecurityFailed
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | The first 6 numbers in <tt>Capabilities</tt> are what is reported by the <tt>ZW_GetNodeProtocolInfo</tt> function: Capability, Security, Reserved, Basic Device Class [, Generic Device Class, Specific Device Class]. If the <tt>Capability</tt> is >= 128, then the device listens for commands, otherwise it's a battery operated device that only wakes up occasionally. After the '&#124;' in <tt>Capabilities</tt> are the command classes supported. More information here: [[ZWave Command Classes]]
- | style="border: 1px solid #000" | If this is "1", MiOS won't talk to this node with security even if the node reports it can.
+|-
- |-
+| style="border: 1px solid #000" | SecurityFailed
- | style="border: 1px solid #000" | LastReset
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | If this is "1", MiOS won't talk to this node with security even if the node reports it can.
- | style="border: 1px solid #000" | When we last reset the node association. (UNIX time)
+|-
- |-
+| style="border: 1px solid #000" | LastReset
- | style="border: 1px solid #000" | WakeupInterval
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | When we last reset the node association. (UNIX time)
- | style="border: 1px solid #000" | How often this battery operated device should wake up to report its status. The default value is 1800 seconds.
+|-
- |-
+| style="border: 1px solid #000" | WakeupInterval
- | style="border: 1px solid #000" | ConfiguredWakeupInterval
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | How often this battery operated device should wake up to report its status. The default value is 1800 seconds.
- | style="border: 1px solid #000" | The wakeup interval already configured on the device.
+|-
- |-
+| style="border: 1px solid #000" | ConfiguredWakeupInterval
- | style="border: 1px solid #000" | LastWakeup
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | The wakeup interval already configured on the device.
- | style="border: 1px solid #000" | When this device last woke up and reported its status. (UNIX time)
+|-
- |-
+| style="border: 1px solid #000" | LastWakeup
- | style="border: 1px solid #000" | LastRouteUpdate
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | When this device last woke up and reported its status. (UNIX time)
- | style="border: 1px solid #000" | When this device's routing information was last checked/updated. (UNIX time)
+|-
- |-
+| style="border: 1px solid #000" | LastRouteUpdate
- | style="border: 1px solid #000" | Health
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | When this device's routing information was last checked/updated. (UNIX time)
- | style="border: 1px solid #000" | A rating from 0-5. A large number means that MiOS can communicate with it easily.
+|-
- |-
+| style="border: 1px solid #000" | Health
- | style="border: 1px solid #000" | HealthDate
+| style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | A rating from 0-5. A large number means that MiOS can communicate with it easily.
- | style="border: 1px solid #000" | The date the rating was assigned. (UNIX time)
+|-
- |-
+| style="border: 1px solid #000" | HealthDate
- | style="border: 1px solid #000" | VariablesGet
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | The date the rating was assigned. (UNIX time)
- | style="border: 1px solid #000" | This is a comma-separated list of the configuration settings read from the device.
+|-
+| style="border: 1px solid #000" | VariablesGet
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This is a comma-separated list of the configuration settings read from the device.
 The format is:
   variable1_number,variable1_value,variable2_number,variable2_value,...
- |-
- | style="border: 1px solid #000" | VariablesSet
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | VariablesSet
- | style="border: 1px solid #000" | This is a comma-separated list of the configuration settings set by the user.
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This is a comma-separated list of the configuration settings set by the user.
 The format is:
   variable1_number-variable1_description,variable1_data_type,variable1_value,variable2_number-variable2_description,variable2_data_type,variable2_value,...
- |-
- | style="border: 1px solid #000" | AssociationGet
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | AssociationGet
- | style="border: 1px solid #000" | This are the association settings read from the device.
+| style="border: 1px solid #000" | string
- |-
+| style="border: 1px solid #000" | This are the association settings read from the device.
- | style="border: 1px solid #000" | AssociationSet
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | AssociationSet
- | style="border: 1px solid #000" | Z-Wave associations for a device are stored in this variable.
+| style="border: 1px solid #000" | string
-The associations are delimited by ';', with the first digit being the group number followed by a comma separated list of nodes to be associated with that group.
+| style="border: 1px solid #000" | Z-Wave associations for a device are stored in this variable.
-Note these are Z-Wave node IDs, not device IDs (ie the 'altid' in the UI). If the node ID is 'z', it means the node ID of the device for which the variable is set.
+The associations are delimited by ';', with the first digit being the group number followed by a comma separated list of nodes to be associated with that group. Note these are Z-Wave node IDs, not device IDs (ie the 'altid' in the UI). If the node ID is 'z', it means the node ID of the device for which the variable is set.
 For multi-channel there is a '.' following the node ID with the endpoint ID.
 Example:
 ,3.4,7;2,5.1,8
 Means group #1 is associated with node #3 endpoint #4 and with node #7, which is non-multi-channel; group #2 is associated with node #5 endpoint #1, and with node #8.
- |-
- | style="border: 1px solid #000" | AssociationNum
+|-
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | AssociationNum
- | style="border: 1px solid #000" | The number of association groups supported by the device.
+| style="border: 1px solid #000" | ui1
- |-
+| style="border: 1px solid #000" | The number of association groups supported by the device.
- | style="border: 1px solid #000" | NonceACK
+|-
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | NonceACK
- | style="border: 1px solid #000" | Internal stuff.
+| style="border: 1px solid #000" | boolean
- |-
+| style="border: 1px solid #000" | Internal stuff.
- | style="border: 1px solid #000" | ManufacturerInfo
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | ManufacturerInfo
- | style="border: 1px solid #000" | Device information. Format:
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Device information. Format:
   ManufacturerID,ProductType,ProductID
- |-
- | style="border: 1px solid #000" | VersionInfo
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | VersionInfo
- | style="border: 1px solid #000" | This is what's reported by the COMMAND_CLASS_VERSION command VERSION_REPORT. There are 5 values: Z-Wave Library Type, Z-Wave Protocol Version, Z-Wave Protocol Sub Version, Application Version, Application Sub Version. The <tt>Application Version</tt> is specific to the device and not defined by Z-Wave.
+| style="border: 1px solid #000" | string
- |-
+| style="border: 1px solid #000" | This is what's reported by the COMMAND_CLASS_VERSION command VERSION_REPORT. There are 5 values: Z-Wave Library Type, Z-Wave Protocol Version, Z-Wave Protocol Sub Version, Application Version, Application Sub Version. The <tt>Application Version</tt> is specific to the device and not defined by Z-Wave.
- | style="border: 1px solid #000" | SetPointInfo
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | SetPointInfo
- | style="border: 1px solid #000" | A comma-separated list of the supported setpoint types:
+| style="border: 1px solid #000" | string
-* <tt>H1</tt> = Heating
+| style="border: 1px solid #000" | A comma-separated list of the supported setpoint types:
-* <tt>C1</tt> = Cooling
+*<tt>H1</tt> = Heating
-* <tt>F1</tt> = Furnace
+*<tt>C1</tt> = Cooling
-* <tt>D1</tt> = Dry Air
+*<tt>F1</tt> = Furnace
-* <tt>MA</tt> = Moist Air
+*<tt>D1</tt> = Dry Air
-* <tt>AC</tt> = Auto changeover
+*<tt>MA</tt> = Moist Air
-* <tt>H2</tt> = Energy Save Heating
+*<tt>AC</tt> = Auto changeover
-* <tt>C2</tt> = Energy Save Cooling
+*<tt>H2</tt> = Energy Save Heating
-* <tt>AH</tt> = Away Heating
+*<tt>C2</tt> = Energy Save Cooling
- |-
+*<tt>AH</tt> = Away Heating
- | style="border: 1px solid #000" | NodeInfo
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | The list of the command classes supported by this device. (hexadecimal numbers)
+| style="border: 1px solid #000" | NodeInfo
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | InitialName
+| style="border: 1px solid #000" | The list of the command classes supported by this device. (hexadecimal numbers)
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | The name that was initially set when the node was first added.
+| style="border: 1px solid #000" | InitialName
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | ConfiguredName
+| style="border: 1px solid #000" | The name that was initially set when the node was first added.
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | The user-specified name when we configured the node.
+| style="border: 1px solid #000" | ConfiguredName
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | ConfiguredVariable
+| style="border: 1px solid #000" | The user-specified name when we configured the node.
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | The user-specified <tt>VariablesSet</tt> when we configured the node.
+| style="border: 1px solid #000" | ConfiguredVariable
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | ConfiguredAssoc
+| style="border: 1px solid #000" | The user-specified <tt>VariablesSet</tt> when we configured the node.
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | The user-specified <tt>AssociationSet</tt> when we configured the node.
+| style="border: 1px solid #000" | ConfiguredAssoc
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Documentation
+| style="border: 1px solid #000" | The user-specified <tt>AssociationSet</tt> when we configured the node.
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | URL of the documentation used on the ''Device Options'' page.
+| style="border: 1px solid #000" | Documentation
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | MeterType
+| style="border: 1px solid #000" | URL of the documentation used on the ''Device Options'' page.
- | style="border: 1px solid #000" | ui1
+|-
- | style="border: 1px solid #000" | The meter type:
+| style="border: 1px solid #000" | MeterType
-* 1 = electric
+| style="border: 1px solid #000" | ui1
-* 2 = gas
+| style="border: 1px solid #000" | The meter type:
-* 3 = water
+*1 = electric
- |-
+*2 = gas
- | style="border: 1px solid #000" | MeterScale
+*3 = water
- | style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | A bit map of the supported meter scales.
+|-
- |-
+| style="border: 1px solid #000" | MeterScale
- | style="border: 1px solid #000" | AlarmType
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | A bit map of the supported meter scales.
- | style="border: 1px solid #000" | List of the supported alarm types.
+|-
- |-
+| style="border: 1px solid #000" | AlarmType
- | style="border: 1px solid #000" | PollOk, PollTxFail, PollNoReply
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | List of the supported alarm types.
- | style="border: 1px solid #000" | These variables are incremented each time the last poll job has the status they describe. They are reset after each network heal.
+|-
- |-
+| style="border: 1px solid #000" | PollOk, PollTxFail, PollNoReply
- | style="border: 1px solid #000" | ManualRoute
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | These variables are incremented each time the last poll job has the status they describe. They are reset after each network heal.
- | style="border: 1px solid #000" | A route specified by the end-user. This is a '''dot'''-separated list of nodes.
+|-
- |-
+| style="border: 1px solid #000" | ManualRoute
- | style="border: 1px solid #000" | AllRoutesFailed
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | A route specified by the end-user. This is a '''dot'''-separated list of nodes.
- | style="border: 1px solid #000" | This is "1" when all the manual routes have failed.
+|-
- |-
+| style="border: 1px solid #000" | AllRoutesFailed
- | style="border: 1px solid #000" | AutoRoute
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This is "1" when all the manual routes have failed.
- | style="border: 1px solid #000" | This contains a list of various routes chosen by profilings.
+|-
+| style="border: 1px solid #000" | AutoRoute
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This contains a list of various routes chosen by profilings.
 Format:
   route1_node1.route1_node2...-route1_score[x],route2_node1.route2_node2...-route2_score[x],...
 The <tt>score</tt> is a measure of latency and accuracy, the lower the number, the better. '<tt>x</tt>' means that the last attempt to use this route failed, so it won't be used anymore.
- |-
- | style="border: 1px solid #000" | IgnoreDirectScene
+|-
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | IgnoreDirectScene
- | style="border: 1px solid #000" | Internal stuff.
+| style="border: 1px solid #000" | boolean
- |-
+| style="border: 1px solid #000" | Internal stuff.
- | style="border: 1px solid #000" | SwitchMlSettings
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | SwitchMlSettings
- | style="border: 1px solid #000" | Internal stuff.
+| style="border: 1px solid #000" | string
- |-
+| style="border: 1px solid #000" | Internal stuff.
- | style="border: 1px solid #000" | BasicSetCapabilities
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | BasicSetCapabilities
- | style="border: 1px solid #000" | Allows defining actions for BASIC_SET messages.
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Allows defining actions for BASIC_SET messages.
 Format:
   <Value>=<Action><Endpoint>
 where:
-* Value  :  the BASIC_SET Value; if Value is "XX", it means any value
-* Action  :  the Action to perform; the supported values are: T<tt>=Trip</tt>, U<tt>=Untrip</tt>, O<tt>=On</tt>, F<tt>=Off</tt>, D<tt>=Dim</tt>
+*Value &nbsp;: the BASIC_SET Value; if Value is "XX", it means any value
-* Endpoint  :  the Endpoint device ID (altid); if Endpoint=0, it means the parent node, or the current node if the device has no children
+*Action &nbsp;: the Action to perform; the supported values are: T<tt>=Trip</tt>, U<tt>=Untrip</tt>, O<tt>=On</tt>, F<tt>=Off</tt>, D<tt>=Dim</tt>
+*Endpoint &nbsp;: the Endpoint device ID (altid); if Endpoint=0, it means the parent node, or the current node if the device has no children
 Examples:
-<code>00=Ue1,FF=Te1</code>  => if receive 0x00, Untrip endpoint "e1"; if receive 0xFF, Trip endpoint "e1"
+<code>00=Ue1,FF=Te1</code> => if receive 0x00, Untrip endpoint "e1"; if receive 0xFF, Trip endpoint "e1"
-<code>XX=D02</code>  => Dim endpoint 02 to whatever value received
+<code>XX=D02</code> => Dim endpoint 02 to whatever value received
-<code>00=T0,FF=U0</code>  => if receive 0x00, Trip the current node; if receive 0xFF, Untrip the current node
+<code>00=T0,FF=U0</code> => if receive 0x00, Trip the current node; if receive 0xFF, Untrip the current node
- |-
- | style="border: 1px solid #000" | SupportedMRTypes
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | SupportedMRTypes
- | style="border: 1px solid #000" | Allows defining which meter report types are supported by the device.
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Allows defining which meter report types are supported by the device.
 Format:
   <CC Hex>-<Supported Type>,<Supported Type>;<CC Hex>-<Supported Type>,<Supported Type>
 where:
-* CC Hex  :  the Hex value of the command class (without 0x):
-** 0x31 for COMMAND_CLASS_SENSOR_MULTILEVEL
-** 0x32 for COMMAND_CLASS_METER
-* Supported Type  :  The HEX value of the type supported for the Command class without 0x
-** Supported types for COMMAND_CLASS_SENSOR_MULTILEVEL:
-*** Temperature = 0x01
-*** General = 0x02
-*** Luminance = 0x03
-*** Power = 0x04
-*** RelativeHumidity = 0x05
-*** Velocity = 0x06
-*** Direction = 0x07
-*** AtmosphericPressure = 0x08
-*** BarometricPressure = 0x09
-*** SolarRadiation = 0x0A
-*** DewPoint = 0x0B
-*** RainRate = 0x0C
-*** TideLevel = 0x0D
-*** Weight = 0x0E
-*** Voltage = 0x0F
-*** Current = 0x10
-*** CO2level = 0x11
-*** AirFlow = 0x12
-*** TankCapacity = 0x13
-*** Distance = 0x14
-*** SeismicIntensity = 0x19
-*** UltraViolet = 0x1B
-** Supported types for COMMAND_CLASS_METER:
+*CC Hex &nbsp;: the Hex value of the command class (without 0x):
-*** Electric=0x01
+**0x31 for COMMAND_CLASS_SENSOR_MULTILEVEL
-*** Gas=0x02
+**0x32 for COMMAND_CLASS_METER
-*** Water=0x03
+*Supported Type &nbsp;: The HEX value of the type supported for the Command class without 0x
+**Supported types for COMMAND_CLASS_SENSOR_MULTILEVEL:
+***Temperature = 0x01
+***General = 0x02
+***Luminance = 0x03
+***Power = 0x04
+***RelativeHumidity = 0x05
+***Velocity = 0x06
+***Direction = 0x07
+***AtmosphericPressure = 0x08
+***BarometricPressure = 0x09
+***SolarRadiation = 0x0A
+***DewPoint = 0x0B
+***RainRate = 0x0C
+***TideLevel = 0x0D
+***Weight = 0x0E
+***Voltage = 0x0F
+***Current = 0x10
+***CO2level = 0x11
+***AirFlow = 0x12
+***TankCapacity = 0x13
+***Distance = 0x14
+***SeismicIntensity = 0x19
+***UltraViolet = 0x1B
+**Supported types for COMMAND_CLASS_METER:
+***Electric=0x01
+***Gas=0x02
+***Water=0x03
 Examples:
@@ Line 615: / Line 670: @@
 <code>31-0F,0E,10,1B;32-01,03</code> => Device supports Voltage, Weight, Current and UltraViolet for COMMAND_CLASS_SENSOR_MULTILEVEL and Electric and Water from COMMAND_CLASS_METER
-If the variable is empty it will be treated as support anything.
+If the variable is empty it will be treated as support anything. If the variable does not contain a command class that command class will be treated as support everything.
-If the variable does not contain a command class that command class will be treated as support everything.
- |-
+|-
- | style="border: 1px solid #000" | NoChildren
+| style="border: 1px solid #000" | NoChildren
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | If this variable is '''1''', delete the child devices, and don't allow the creation of other child devices, to avoid creating ghost devices.
+| style="border: 1px solid #000" | If this variable is '''1''', delete the child devices, and don't allow the creation of other child devices, to avoid creating ghost devices.
- |-
+|-
- | style="border: 1px solid #000" | AlarmTypes
+| style="border: 1px solid #000" | AlarmTypes
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | '''(NOTE: this is its new service. ''urn:micasaverde-com:serviceId:HaDevice1'' was left unchanged to mantain backward compatibility.)'''
+| style="border: 1px solid #000" | '''(NOTE: this is its new service. ''urn:micasaverde-com:serviceId:HaDevice1'' was left unchanged to mantain backward compatibility.)'''
-Allows setting what each Alarm Type does for devices using COMMAND_CLASS_ALARM / COMMAND_CLASS_NOTIFICATION.
+Allows setting what each Alarm Type does for devices using COMMAND_CLASS_ALARM / COMMAND_CLASS_NOTIFICATION. The format is:
-The format is:
   AlarmTypes:AlarmLevels:AlarmCode:Action;AlarmTypes:AlarmLevels:AlarmCode:Action
 where:
-* <tt>AlarmTypes</tt> : <code>type1,type2-type3,!type4</code>
-* <tt>AlarmLevels</tt> : <code>00,01,05-20,!FF</code>
+*<tt>AlarmTypes</tt>&nbsp;: <code>type1,type2-type3,!type4</code>
-* <tt>AlarmCode</tt> : <code>SMOKE</code>, <code>CO</code>, <code>TAMPER_ALARM</code>, etc.
+*<tt>AlarmLevels</tt>&nbsp;: <code>00,01,05-20,!FF</code>
-* <tt>Action</tt> : <code>0</code> = don't update the ''Tripped'' variable, <code>1</code> = update the ''Tripped'' variable, <code>2</code> = ignore the message (i.e. don't update the ''sl_Alarm'' variable)
+*<tt>AlarmCode</tt>&nbsp;: <code>SMOKE</code>, <code>CO</code>, <code>TAMPER_ALARM</code>, etc.
+*<tt>Action</tt>&nbsp;: <code>0</code> = don't update the ''Tripped'' variable, <code>1</code> = update the ''Tripped'' variable, <code>2</code> = ignore the message (i.e. don't update the ''sl_Alarm'' variable)
 Example:
 :FF:SMOKE:1;0C:FF::1;0D:FF:TAMPER_ALARM:0
-* if Alarm Type is ''0x01'' and the Alarm Level is ''0xFF'', then set the ''sl_Alarm'' variable to "SMOKE" and trip the sensor
-* if Alarm Type is ''0x0C'' and the Alarm Level is ''0xFF'', don't update the ''sl_Alarm'' variable, and trip the sensor
+*if Alarm Type is ''0x01'' and the Alarm Level is ''0xFF'', then set the ''sl_Alarm'' variable to "SMOKE" and trip the sensor
-* if Alarm Type is ''0x0D'' and the Alarm Level is ''0xFF'', then set the ''sl_Alarm'' variable to "TAMPER_ALARM", but don't trip the sensor
+*if Alarm Type is ''0x0C'' and the Alarm Level is ''0xFF'', don't update the ''sl_Alarm'' variable, and trip the sensor
- |-
+*if Alarm Type is ''0x0D'' and the Alarm Level is ''0xFF'', then set the ''sl_Alarm'' variable to "TAMPER_ALARM", but don't trip the sensor
- | style="border: 1px solid #000" | AlarmTypesV2
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | Allows customizing the handling of the COMMAND_CLASS_ALARM / COMMAND_CLASS_NOTIFICATION >= v2 messages.
+| style="border: 1px solid #000" | AlarmTypesV2
-The format is a ';' separated list of tokens.
+| style="border: 1px solid #000" | string
-Format of each token:
+| style="border: 1px solid #000" | Allows customizing the handling of the COMMAND_CLASS_ALARM / COMMAND_CLASS_NOTIFICATION >= v2 messages.
+The format is a ';' separated list of tokens. Format of each token:
   TypesV1:LevelV1:NotificationStatus:NotificationType:Event:AlarmCode:TripValue
 Where:
-* <tt>TypesV1</tt> : type1_v1,type2_v1-type3_v1,!type4_v1, XX (don't care)
-* <tt>LevelV1</tt> : 00,01,02-05,!FF, XX (don't care)
+*<tt>TypesV1</tt>&nbsp;: type1_v1,type2_v1-type3_v1,!type4_v1, XX (don't care)
-* <tt>NotificationStatus</tt> : 01-FF, XX (don't care)
+*<tt>LevelV1</tt>&nbsp;: 00,01,02-05,!FF, XX (don't care)
-* <tt>NotificationType</tt> : type1,type2-type3,!type4, XX (don't care)
+*<tt>NotificationStatus</tt>&nbsp;: 01-FF, XX (don't care)
-* <tt>Event</tt> : 00,01,03-5A,!04,!FF, XX (don't care)
+*<tt>NotificationType</tt>&nbsp;: type1,type2-type3,!type4, XX (don't care)
-* <tt>AlarmCode</tt> : SMOKE, CO, TAMPER_ALARM, etc.
+*<tt>Event</tt>&nbsp;: 00,01,03-5A,!04,!FF, XX (don't care)
-* <tt>TripValue</tt> : 0 = Untrip, 1 = Trip, C = don't update the Tripped variable (only the Alarm Code), X = Ignore
+*<tt>AlarmCode</tt>&nbsp;: SMOKE, CO, TAMPER_ALARM, etc.
+*<tt>TripValue</tt>&nbsp;: 0 = Untrip, 1 = Trip, C = don't update the Tripped variable (only the Alarm Code), X = Ignore
 If the TypeV1 or NotificationType are not XX and if there was no match, the function will try the next token.
- |-
- | style="border: 1px solid #000" | AssociationGroups
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | AssociationGroups
- | style="border: 1px solid #000" | If specified, associate ourselves only with these groups, not all groups. The groups should be given as a comma separated list, like this:
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | If specified, associate ourselves only with these groups, not all groups. The groups should be given as a comma separated list, like this:
 ,3,4,255
 You could add this variable with a value = 0 if you want to be in NO association groups.
- |-
- | style="border: 1px solid #000" | IgnoreCommandClass
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | IgnoreCommandClass
- | style="border: 1px solid #000" | Allows ignoring specific command classes (CC) for that device.
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Allows ignoring specific command classes (CC) for that device.
 Format:
   <CC #1>-<Command #1>,<Command #2>;<CC #2>-*;<CC #3>-<Command #1>
-* Both the command classes and the commands are given by their hex code.
-* <nowiki>*</nowiki> is used as an wild card indicating all commands.
+*Both the command classes and the commands are given by their hex code.
+*<nowiki>*</nowiki> is used as an wild card indicating all commands.
 Example:
 -03,05;71-*;20-03
 That means: ignore CC 26 commands 03 and 05, all commands from CC 71, and CC 20 command 03.
- |}
-<br />
+|}
 == ZWaveNetwork1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:ZWaveNetwork1
-* '''File''': S_ZWaveNetwork1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:ZWaveNetwork1
+*'''File''': S_ZWaveNetwork1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | NetStatusID
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | The status of the Z-Wave network:
-* 0 = Status not set
-* 1 = OK
-* 2 = Quiting
-* 3 = Waiting to quit
-* 4 = No dongle
-* 5 = Configuring: still running init/configure scripts
-* 6 = Failure
-* 7 = Initializing
- |-
- | style="border: 1px solid #000" | NetStatusText
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Full Z-Wave network status description
- |-
- | style="border: 1px solid #000" | LastError
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The last Z-Wave error in the network
- |-
- | style="border: 1px solid #000" | LastUpdate
- | style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | The UNIX time when the Z-Wave component of the LuaUPnP engine started.
- |-
- | style="border: 1px solid #000" | LastDongleBackup
- | style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | The UNIX time of the last Z-Wave dongle backup.
- |-
- | style="border: 1px solid #000" | LastHeal
- | style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | The UNIX time of the last Z-Wave network heal.
- |-
- | style="border: 1px solid #000" | VersionInfo
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | The Z-Wave version.
- |-
- | style="border: 1px solid #000" | HomeID
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | The unique ID of the Z-Wave network.
- |-
- | style="border: 1px solid #000" | Role
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | Z-Wave specific stuff.
- |-
- | style="border: 1px solid #000" | TO3066
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | Internal stuff.
- |-
- | style="border: 1px solid #000" | ComPort
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | This is the port where MiOS will search for the Z-Wave dongle. On Vera Lite, this is <tt>/dev/ttyS0</tt>.
- |-
- | style="border: 1px solid #000" | LockComPort
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | If this is "1", MiOS won't search for the Z-Wave dongle on the other available ports if it doesn't find it on <tt>ComPort</tt>.
- |-
- | style="border: 1px solid #000" | Use45
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | If this is "1", use Z-Wave version 3.20 instead of 2.78.
- |-
- | style="border: 1px solid #000" | UseMR
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | If this is "1", use MiOS routing.
- |-
- | style="border: 1px solid #000" | LimitNeighbors
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | With MiOS routing: if this is "1", when the routing table is created, consider only Z-Wave's neighbors as valid options.
- |-
- | style="border: 1px solid #000" | PollingEnabled
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | If this is "1", MiOS will automatically poll the Z-Wave devices.
- |-
- | style="border: 1px solid #000" | PollDelayInitial
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | Number of seconds after the LuaUPnP engine has (re-)started before the polling loop begins.
- |-
- | style="border: 1px solid #000" | PollDelayDeadTime
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | Number of seconds MiOS must not have transmitted any non-poll command before the next poll command is sent.
- |-
- | style="border: 1px solid #000" | PollMinDelay
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | Number of seconds between poll commands.
- |-
- | style="border: 1px solid #000" | PollFrequency
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | Minimum number of seconds between poll commands to the same node.
- |-
- | style="border: 1px solid #000" | SceneIDs
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Used for scene controllers. This is a CSV where each item has this format: <tt>node#-button#=ZWaveSceneID</tt>
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
-  ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+|-
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+! style="border: 1px solid #000;  width: 150px" | Variable
- ! style="border: 1px solid #000"               rowspan="2" | Description
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description
- ! style="border: 1px solid #000; width: 130px"             | Name
+|-
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+| style="border: 1px solid #000" | NetStatusID
- |-
+| style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" rowspan="3" | ResetNetwork
+| style="border: 1px solid #000" | The status of the Z-Wave network:
- | style="border: 1px solid #000" | ResetMode
+*0 = Status not set
- | style="border: 1px solid #000" | string
+*1 = OK
- | style="border: 1px solid #000" rowspan="3" | Reset the Z-Wave network.
+*2 = Quiting
-* <tt>ResetMode</tt> can be "SIS" or "SUC".
+*3 = Waiting to quit
-* <tt>HomeID</tt> is a 32 bit hex number representing the new HomeID. If this parameter doesn't exist or is 0, MiOS will generate the new HomeID.
+*4 = No dongle
-* <tt>ZeroMemory</tt>: if this is "1", the memory will be zeroed before resetting.
+*5 = Configuring: still running init/configure scripts
- |-
+*6 = Failure
- | style="border: 1px solid #000" | HomeID
+*7 = Initializing
- | style="border: 1px solid #000" | string
- |-
+|-
- | style="border: 1px solid #000" | ZeroMemory
+| style="border: 1px solid #000" | NetStatusText
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | string
- |-
+| style="border: 1px solid #000" | Full Z-Wave network status description
- | style="border: 1px solid #000" rowspan="3" | PutByte
+|-
- | style="border: 1px solid #000" | StartAddress
+| style="border: 1px solid #000" | LastError
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" rowspan="3" | Used to convert Z-Wave from 2.78 to 3.20 in which case the <tt>StartAddress</tt> parameter must be "convert502_452" and the rest are ignored.
+| style="border: 1px solid #000" | The last Z-Wave error in the network
- |-
+|-
- | style="border: 1px solid #000" | StopAddress
+| style="border: 1px solid #000" | LastUpdate
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | ui4
- |-
+| style="border: 1px solid #000" | The UNIX time when the Z-Wave component of the LuaUPnP engine started.
- | style="border: 1px solid #000" | Value
+|-
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | LastDongleBackup
- |-
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" rowspan="1" | ReconfigureAllNodes
+| style="border: 1px solid #000" | The UNIX time of the last Z-Wave dongle backup.
- | style="border: 1px solid #000" | FailedOnly
+|-
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | LastHeal
- | style="border: 1px solid #000" rowspan="1" | Reconfigure the Z-Wave nodes. If <tt>FailedOnly</tt> is "1", only the devices that failed to configure are reconfigured.
+| style="border: 1px solid #000" | ui4
- |-
+| style="border: 1px solid #000" | The UNIX time of the last Z-Wave network heal.
- | style="border: 1px solid #000" rowspan="1" | UpdateNetwork
+|-
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
+| style="border: 1px solid #000" | VersionInfo
- | style="border: 1px solid #000" rowspan="1" | Get network update from SUC/SIS.
+| style="border: 1px solid #000" | boolean
- |-
+| style="border: 1px solid #000" | The Z-Wave version.
- | style="border: 1px solid #000" rowspan="1" | UpdateNeighbors
+|-
- | style="border: 1px solid #000" | Device
+| style="border: 1px solid #000" | HomeID
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" rowspan="1" | Update the neighbor nodes of the given device. <tt>Device</tt> is the device number.
+| style="border: 1px solid #000" | The unique ID of the Z-Wave network.
- |-
+|-
- | style="border: 1px solid #000" rowspan="1" | BackupDongle
+| style="border: 1px solid #000" | Role
- | style="border: 1px solid #000" | Restore
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | Z-Wave specific stuff.
- | style="border: 1px solid #000" rowspan="1" | Backs up the Z-Wave network. The backup is in <tt>/etc/cmh/dongle.dump</tt>. If <tt>Restore</tt> is "1", the Z-Wave network is restored from the backup.
+|-
- |-
+| style="border: 1px solid #000" | TO3066
- | style="border: 1px solid #000" rowspan="1" | PollAllNodes
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
+| style="border: 1px solid #000" | Internal stuff.
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
+|-
- |-
+| style="border: 1px solid #000" | ComPort
- | style="border: 1px solid #000" rowspan="5" | RemoveNodes
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | InclusionMode
+| style="border: 1px solid #000" | This is the port where MiOS will search for the Z-Wave dongle. On Vera Lite, this is <tt>/dev/ttyS0</tt>.
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" rowspan="5" | Puts Vera in exclude mode.
+| style="border: 1px solid #000" | LockComPort
-* <tt>InclusionMode</tt> can be "FullPower" or anything else, in which case the exclusion will be low power.
+| style="border: 1px solid #000" | boolean
-* <tt>NodeType</tt> is the type of node to be excluded. The valid values are:
+| style="border: 1px solid #000" | If this is "1", MiOS won't search for the Z-Wave dongle on the other available ports if it doesn't find it on <tt>ComPort</tt>.
-** 1 = any
+|-
-** 2 = controller
+| style="border: 1px solid #000" | Use45
-** 3 = slave
+| style="border: 1px solid #000" | boolean
-** 4 = existing
+| style="border: 1px solid #000" | If this is "1", use Z-Wave version 3.20 instead of 2.78.
-** 5 = stop
+|-
-* <tt>Timeout</tt> is the number of seconds Vera will be in exclude mode.
+| style="border: 1px solid #000" | UseMR
-* If <tt>Multiple</tt> is "0" then Vera will exit exclude mode after a node is excluded.
+| style="border: 1px solid #000" | boolean
-* If <tt>Reload</tt> is "1" the LuaUPnP engine will be restarted after Vera exits exclude mode.
+| style="border: 1px solid #000" | If this is "1", use MiOS routing.
- |-
+|-
- | style="border: 1px solid #000" | NodeType
+| style="border: 1px solid #000" | LimitNeighbors
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | boolean
- |-
+| style="border: 1px solid #000" | With MiOS routing: if this is "1", when the routing table is created, consider only Z-Wave's neighbors as valid options.
- | style="border: 1px solid #000" | Timeout
+|-
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | PollingEnabled
- |-
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | Multiple
+| style="border: 1px solid #000" | If this is "1", MiOS will automatically poll the Z-Wave devices.
- | style="border: 1px solid #000" | boolean
+|-
- |-
+| style="border: 1px solid #000" | PollDelayInitial
- | style="border: 1px solid #000" | Reload
+| style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | Number of seconds after the LuaUPnP engine has (re-)started before the polling loop begins.
- |-
+|-
- | style="border: 1px solid #000" rowspan="7" | AddNodes
+| style="border: 1px solid #000" | PollDelayDeadTime
- | style="border: 1px solid #000" | InclusionMode
+| style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Number of seconds MiOS must not have transmitted any non-poll command before the next poll command is sent.
- | style="border: 1px solid #000" rowspan="7" | Puts Vera in include mode.
+|-
-* <tt>InclusionMode</tt> can be "FullPower" or anything else, in which case the inclusion will be low power.
+| style="border: 1px solid #000" | PollMinDelay
-* <tt>NodeType</tt> is the type of node to be included. The valid values are:
+| style="border: 1px solid #000" | ui1
-** 1 = any
+| style="border: 1px solid #000" | Number of seconds between poll commands.
-** 2 = controller
+|-
-** 3 = slave
+| style="border: 1px solid #000" | PollFrequency
-** 4 = existing
+| style="border: 1px solid #000" | ui1
-** 5 = stop
+| style="border: 1px solid #000" | Minimum number of seconds between poll commands to the same node.
-* <tt>Timeout</tt> is the number of seconds Vera will be in include mode.
+|-
-* If <tt>Multiple</tt> is "0" then Vera will exit include mode after a node is included.
+| style="border: 1px solid #000" | SceneIDs
-* <tt>ControllerShift</tt> must be "0".
+| style="border: 1px solid #000" | string
-* If <tt>Reload</tt> is "1" the LuaUPnP engine will be restarted after Vera exits include mode.
+| style="border: 1px solid #000" | Used for scene controllers. This is a CSV where each item has this format: <tt>node#-button#=ZWaveSceneID</tt>
-* <tt>PK_KitDevice</tt> is the KitDevice number of the device we expect to be included.
+|}
- |-
- | style="border: 1px solid #000" | NodeType
- | style="border: 1px solid #000" | ui1
- |-
+{| style="border: 1px solid #000;  border-collapse: collapse"
- | style="border: 1px solid #000" | Timeout
+|-
- | style="border: 1px solid #000" | ui1
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
- |-
+! style="border: 1px solid #000" colspan="2" | Arguments
- | style="border: 1px solid #000" | Multiple
+! style="border: 1px solid #000" rowspan="2" | Description
- | style="border: 1px solid #000" | boolean
+|-
- |-
+! style="border: 1px solid #000;  width: 130px" | Name
- | style="border: 1px solid #000" | ControllerShift
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
- | style="border: 1px solid #000" | boolean
+|-
- |-
+| style="border: 1px solid #000" rowspan="3" | ResetNetwork
- | style="border: 1px solid #000" | Reload
+| style="border: 1px solid #000" | ResetMode
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | string
- |-
+| style="border: 1px solid #000" rowspan="3" | Reset the Z-Wave network.
- | style="border: 1px solid #000" | PK_KitDevice
+*<tt>ResetMode</tt> can be "SIS" or "SUC".
- | style="border: 1px solid #000" | ui4
+*<tt>HomeID</tt> is a 32 bit hex number representing the new HomeID. If this parameter doesn't exist or is 0, MiOS will generate the new HomeID.
- |-
+*<tt>ZeroMemory</tt>: if this is "1", the memory will be zeroed before resetting.
- | style="border: 1px solid #000" rowspan="1" | DownloadNetwork
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
+|-
- | style="border: 1px solid #000" rowspan="1" | Copy the Z-Wave network from a master controller.
+| style="border: 1px solid #000" | HomeID
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" rowspan="7" | HealNetwork
+|-
- | style="border: 1px solid #000" | BatteryMinutes
+| style="border: 1px solid #000" | ZeroMemory
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" rowspan="7" | Heals/consolidates the Z-Wave network.
+|-
-* <tt>BatteryMinutes</tt>: how many minutes to wait for battery operated devices to be discovered.
+| style="border: 1px solid #000" rowspan="3" | PutByte
-* If <tt>Node</tt> is not blank, then only this node will be repaired.
+| style="border: 1px solid #000" | StartAddress
-* <tt>StressCycles</tt> is the number of cycles to stress test each node.
+| style="border: 1px solid #000" | string
-* If <tt>Configure</tt> is "1", then all the devices will be re-configured when done.
+| style="border: 1px solid #000" rowspan="3" | Used to convert Z-Wave from 2.78 to 3.20 in which case the <tt>StartAddress</tt> parameter must be "convert502_452" and the rest are ignored.
-* If <tt>ManualRoute</tt> is "1", then only update MiOS routing (overrides other settings).
+|-
-* <tt>StartStage</tt> is the starting heal stage. The valid values are:
+| style="border: 1px solid #000" | StopAddress
-** 1 = Request network update.
+| style="border: 1px solid #000" | string
-** 2 = Request neighbor node update.
+|-
-** 3 = Update the routing tables and neighbor nodes.
+| style="border: 1px solid #000" | Value
-** 4 = Calculate the best routes.
+| style="border: 1px solid #000" | ui4
-** 5 = Re-configure all nodes.
+|-
-** 6 = Wait <tt>BatteryMinutes</tt> to request neighbor node update and configure all battery operated nodes.
+| style="border: 1px solid #000" rowspan="1" | ReconfigureAllNodes
-** 7 = Do a stress test for <tt>StressCycles</tt>.
+| style="border: 1px solid #000" | FailedOnly
-* <tt>StopStage</tt>: Same as <tt>StartStage</tt>.
+| style="border: 1px solid #000" | boolean
- |-
+| style="border: 1px solid #000" rowspan="1" | Reconfigure the Z-Wave nodes. If <tt>FailedOnly</tt> is "1", only the devices that failed to configure are reconfigured.
- | style="border: 1px solid #000" | Node
+|-
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" rowspan="1" | UpdateNetwork
- |-
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
- | style="border: 1px solid #000" | StressCycles
+| style="border: 1px solid #000" rowspan="1" | Get network update from SUC/SIS.
- | style="border: 1px solid #000" | ui1
+|-
- |-
+| style="border: 1px solid #000" rowspan="1" | UpdateNeighbors
- | style="border: 1px solid #000" | Configure
+| style="border: 1px solid #000" | Device
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | ui4
- |-
+| style="border: 1px solid #000" rowspan="1" | Update the neighbor nodes of the given device. <tt>Device</tt> is the device number.
- | style="border: 1px solid #000" | ManualRoute
+|-
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" rowspan="1" | BackupDongle
- |-
+| style="border: 1px solid #000" | Restore
- | style="border: 1px solid #000" | StartStage
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" rowspan="1" | Backs up the Z-Wave network. The backup is in <tt>/etc/cmh/dongle.dump</tt>. If <tt>Restore</tt> is "1", the Z-Wave network is restored from the backup.
- |-
+|-
- | style="border: 1px solid #000" | StopStage
+| style="border: 1px solid #000" rowspan="1" | PollAllNodes
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
- |-
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
- | style="border: 1px solid #000" rowspan="6" | SetPolling
+|-
- | style="border: 1px solid #000" | IsTemporary
+| style="border: 1px solid #000" rowspan="5" | RemoveNodes
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | InclusionMode
- | style="border: 1px solid #000" rowspan="6" | Set the polling parameters.
+| style="border: 1px solid #000" | string
-* If <tt>IsTemporary</tt> is "1", then these polling settings will be lost when the LuaUPnP engine is reloaded.
+| style="border: 1px solid #000" rowspan="5" | Puts Vera in exclude mode.
-* <tt>PollingEnabled</tt>: see the related variable.
+*<tt>InclusionMode</tt> can be "FullPower" or anything else, in which case the exclusion will be low power.
-* <tt>PollDelayInitial</tt>: see the related variable.
+*<tt>NodeType</tt> is the type of node to be excluded. The valid values are:
-* <tt>PollDelayDeadTime</tt>: see the related variable.
+**1 = any
-* <tt>PollMinDelay</tt>: see the related variable.
+**2 = controller
-* <tt>PollFrequency</tt>: see the related variable.
+**3 = slave
- |-
+**4 = existing
- | style="border: 1px solid #000" | PollingEnabled
+**5 = stop
- | style="border: 1px solid #000" | PollingEnabled
+*<tt>Timeout</tt> is the number of seconds Vera will be in exclude mode.
- |-
+*If <tt>Multiple</tt> is "0" then Vera will exit exclude mode after a node is excluded.
- | style="border: 1px solid #000" | PollDelayInitial
+*If <tt>Reload</tt> is "1" the LuaUPnP engine will be restarted after Vera exits exclude mode.
- | style="border: 1px solid #000" | PollDelayInitial
- |-
+|-
- | style="border: 1px solid #000" | PollDelayDeadTime
+| style="border: 1px solid #000" | NodeType
- | style="border: 1px solid #000" | PollDelayDeadTime
+| style="border: 1px solid #000" | ui1
- |-
+|-
- | style="border: 1px solid #000" | PollMinDelay
+| style="border: 1px solid #000" | Timeout
- | style="border: 1px solid #000" | PollMinDelay
+| style="border: 1px solid #000" | ui1
- |-
+|-
- | style="border: 1px solid #000" | PollFrequency
+| style="border: 1px solid #000" | Multiple
- | style="border: 1px solid #000" | PollFrequency
+| style="border: 1px solid #000" | boolean
- |-
+|-
- | style="border: 1px solid #000" rowspan="2" | SendData
+| style="border: 1px solid #000" | Reload
- | style="border: 1px solid #000" | Node
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | ui1
+|-
- | style="border: 1px solid #000" rowspan="2" | Sends the Z-Wave <code>Data</code> to the Z-Wave <code>Node</code>.
+| style="border: 1px solid #000" rowspan="7" | AddNodes
+| style="border: 1px solid #000" | InclusionMode
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" rowspan="7" | Puts Vera in include mode.
+*<tt>InclusionMode</tt> can be "FullPower" or anything else, in which case the inclusion will be low power.
+*<tt>NodeType</tt> is the type of node to be included. The valid values are:
+**1 = any
+**2 = controller
+**3 = slave
+**4 = existing
+**5 = stop
+*<tt>Timeout</tt> is the number of seconds Vera will be in include mode.
+*If <tt>Multiple</tt> is "0" then Vera will exit include mode after a node is included.
+*<tt>ControllerShift</tt> must be "0".
+*If <tt>Reload</tt> is "1" the LuaUPnP engine will be restarted after Vera exits include mode.
+*<tt>PK_KitDevice</tt> is the KitDevice number of the device we expect to be included.
+|-
+| style="border: 1px solid #000" | NodeType
+| style="border: 1px solid #000" | ui1
+|-
+| style="border: 1px solid #000" | Timeout
+| style="border: 1px solid #000" | ui1
+|-
+| style="border: 1px solid #000" | Multiple
+| style="border: 1px solid #000" | boolean
+|-
+| style="border: 1px solid #000" | ControllerShift
+| style="border: 1px solid #000" | boolean
+|-
+| style="border: 1px solid #000" | Reload
+| style="border: 1px solid #000" | boolean
+|-
+| style="border: 1px solid #000" | PK_KitDevice
+| style="border: 1px solid #000" | ui4
+|-
+| style="border: 1px solid #000" rowspan="1" | DownloadNetwork
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000" rowspan="1" | Copy the Z-Wave network from a master controller.
+|-
+| style="border: 1px solid #000" rowspan="7" | HealNetwork
+| style="border: 1px solid #000" | BatteryMinutes
+| style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" rowspan="7" | Heals/consolidates the Z-Wave network.
+*<tt>BatteryMinutes</tt>: how many minutes to wait for battery operated devices to be discovered.
+*If <tt>Node</tt> is not blank, then only this node will be repaired.
+*<tt>StressCycles</tt> is the number of cycles to stress test each node.
+*If <tt>Configure</tt> is "1", then all the devices will be re-configured when done.
+*If <tt>ManualRoute</tt> is "1", then only update MiOS routing (overrides other settings).
+*<tt>StartStage</tt> is the starting heal stage. The valid values are:
+**1 = Request network update.
+**2 = Request neighbor node update.
+**3 = Update the routing tables and neighbor nodes.
+**4 = Calculate the best routes.
+**5 = Re-configure all nodes.
+**6 = Wait <tt>BatteryMinutes</tt> to request neighbor node update and configure all battery operated nodes.
+**7 = Do a stress test for <tt>StressCycles</tt>.
+*<tt>StopStage</tt>: Same as <tt>StartStage</tt>.
+|-
+| style="border: 1px solid #000" | Node
+| style="border: 1px solid #000" | ui1
+|-
+| style="border: 1px solid #000" | StressCycles
+| style="border: 1px solid #000" | ui1
+|-
+| style="border: 1px solid #000" | Configure
+| style="border: 1px solid #000" | boolean
+|-
+| style="border: 1px solid #000" | ManualRoute
+| style="border: 1px solid #000" | boolean
+|-
+| style="border: 1px solid #000" | StartStage
+| style="border: 1px solid #000" | ui1
+|-
+| style="border: 1px solid #000" | StopStage
+| style="border: 1px solid #000" | ui1
+|-
+| style="border: 1px solid #000" rowspan="6" | SetPolling
+| style="border: 1px solid #000" | IsTemporary
+| style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" rowspan="6" | Set the polling parameters.
+*If <tt>IsTemporary</tt> is "1", then these polling settings will be lost when the LuaUPnP engine is reloaded.
+*<tt>PollingEnabled</tt>: see the related variable.
+*<tt>PollDelayInitial</tt>: see the related variable.
+*<tt>PollDelayDeadTime</tt>: see the related variable.
+*<tt>PollMinDelay</tt>: see the related variable.
+*<tt>PollFrequency</tt>: see the related variable.
+|-
+| style="border: 1px solid #000" | PollingEnabled
+| style="border: 1px solid #000" | PollingEnabled
+|-
+| style="border: 1px solid #000" | PollDelayInitial
+| style="border: 1px solid #000" | PollDelayInitial
+|-
+| style="border: 1px solid #000" | PollDelayDeadTime
+| style="border: 1px solid #000" | PollDelayDeadTime
+|-
+| style="border: 1px solid #000" | PollMinDelay
+| style="border: 1px solid #000" | PollMinDelay
+|-
+| style="border: 1px solid #000" | PollFrequency
+| style="border: 1px solid #000" | PollFrequency
+|-
+| style="border: 1px solid #000" rowspan="2" | SendData
+| style="border: 1px solid #000" | Node
+| style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" rowspan="2" | Sends the Z-Wave <code>Data</code> to the Z-Wave <code>Node</code>.
 Examples:
 . Set parameter 29 to "3" on node 15:
-* HTTP request:
+*HTTP request:
 <code>/data_request?id=action&DeviceNum=1&serviceId=urn:micasaverde-com:serviceId:ZWaveNetwork1&action=SendData&Node=15&Data=x70%204%2029%201%203</code>
-* Lua:
+*Lua:
 <code>luup.call_action("urn:micasaverde-com:serviceId:ZWaveNetwork1", "SendData", {Node=15, Data="x70 4 29 1 3"}, 1)</code>
 . Turn on a light (node 7):
-* HTTP request:
+*HTTP request:
 <code>/data_request?id=action&DeviceNum=1&serviceId=urn:micasaverde-com:serviceId:ZWaveNetwork1&action=SendData&Node=7&Data=x20%201%20xFF</code>
-* Lua:
+*Lua:
 <code>luup.call_action("urn:micasaverde-com:serviceId:ZWaveNetwork1", "SendData", {Node=7, Data="x20 1 xFF"}, 1)</code>
- |-
- | style="border: 1px solid #000" | Data
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Data
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" rowspan="1" | SimulateIncomingData
+|-
- | style="border: 1px solid #000" | Data
+| style="border: 1px solid #000" rowspan="1" | SimulateIncomingData
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Data
- | style="border: 1px solid #000" rowspan="1" | Calls the Z-Wave message handler for the given data.
+| style="border: 1px solid #000" | string
- |}
+| style="border: 1px solid #000" rowspan="1" | Calls the Z-Wave message handler for the given data.
-<br />
+|}
 == USBUIRT1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:USBUIRT1
-* '''File''': S_USBUIRT.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:USBUIRT1
+*'''File''': S_USBUIRT.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" | Variable
+! style="border: 1px solid #000;  width: 60px" | Type
+! style="border: 1px solid #000" | Description
+|-
+| style="border: 1px solid #000" | ComPort
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | The path of the USB port the UIRT is connected to. On Vera Lite this is <tt>/dev/ttyUSB0</tt>
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | ComPort
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The path of the USB port the UIRT is connected to. On Vera Lite this is <tt>/dev/ttyUSB0</tt>
- |}
 == Camera1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:Camera1
-* '''File''': S_Camera1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:Camera1
+*'''File''': S_Camera1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | VideoURLs
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | This variable defines the streaming parameters, and without it streaming doesn't work. This variable has this structure:
-<tt>Info1:URL1:Info2:URL2:</tt>
-The <tt>Info</tt> parameters are:
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" | Variable
+! style="border: 1px solid #000;  width: 60px" | Type
+! style="border: 1px solid #000" | Description
+|-
+| style="border: 1px solid #000" | VideoURLs
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This variable defines the streaming parameters, and without it streaming doesn't work. This variable has this structure:
+<tt>Info1:URL1:Info2:URL2:</tt>
+<br/>The <tt>Info</tt> parameters are:
 . The protocol: can be <tt>rtsp</tt> or <tt>http</tt>
@@ Line 1,031: / Line 1,130: @@
 . HTTP authentication required: 1 = yes, send the username and password in the request, 0 = no, don't send the username and password
-. Video codec: <tt>mpeg4</tt> | <tt>mjpeg</tt> | etc.
+. Video codec: <tt>mpeg4</tt> &#124; <tt>mjpeg</tt> &#124; etc.
 . Audio codec: blank = no audio
@@ Line 1,041: / Line 1,140: @@
 . Height: 480
-. Players: <tt>q</tt>|<tt>a</tt>|<tt>i</tt>|<tt>w</tt>, a string of characters indicating known good players. <tt>q</tt> = Quicktime plugin, <tt>a</tt> = Android, <tt>i</tt> = iPhone, <tt>w</tt> = normal web browser.
+. Players: <tt>q</tt>&#124;<tt>a</tt>&#124;<tt>i</tt>&#124;<tt>w</tt>, a string of characters indicating known good players. <tt>q</tt> = Quicktime plugin, <tt>a</tt> = Android, <tt>i</tt> = iPhone, <tt>w</tt> = normal web browser.
-The <tt>URL</tt> is the streaming URL compatible with the players specified in <tt>Info</tt>.
+<br/>The <tt>URL</tt> is the streaming URL compatible with the players specified in <tt>Info</tt>.
 Currently only the <tt>protocol</tt>, <tt>HTTP auth</tt>, <tt>players</tt> and <tt>URL</tt> parameters are used. The rest of the parameters are ignored.
+<br/><tt>VideoURLs</tt> example for VistaCam:
-<tt>VideoURLs</tt> example for VistaCam:
 <tt>rtsp,0,mpeg4,,m,640,480,qai:img/media.sav:http,0,mjpeg,,m,640,480,w:img/video.mjpeg:</tt>
- |-
- | style="border: 1px solid #000" | URL
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | URL
- | style="border: 1px solid #000" | This is the URL to get a snapshot from the camera.
+| style="border: 1px solid #000" | string
- |-
+| style="border: 1px solid #000" | This is the URL to get a snapshot from the camera.
- | style="border: 1px solid #000" | RingBuffer
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | RingBuffer
- | style="border: 1px solid #000" | This variable contains the ring buffer parameters.
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This variable contains the ring buffer parameters.
 The format is: <code>Enabled,BufferSeconds,NumFramesToPurge,Format,URL</code>
-* <code>Enabled</code> can be '''0''' or '''1'''. If it's '''1''', the ring buffer is enabled.
-* <code>BufferSeconds</code>: how many seconds of video to keep in the buffer. This is limited by the available memory on Vera. Setting this to a large value will cause instability.
+*<code>Enabled</code> can be '''0''' or '''1'''. If it's '''1''', the ring buffer is enabled.
-* <code>NumFramesToPurge</code>: how many frames to wait before attempting to purge.
+*<code>BufferSeconds</code>: how many seconds of video to keep in the buffer. This is limited by the available memory on Vera. Setting this to a large value will cause instability.
-* <code>Format</code> can be '''2'''=MJPEG, '''3'''=MP4.
+*<code>NumFramesToPurge</code>: how many frames to wait before attempting to purge.
-* <code>URL</code> is the streaming URL.
+*<code>Format</code> can be '''2'''=MJPEG, '''3'''=MP4.
- |-
+*<code>URL</code> is the streaming URL.
- | style="border: 1px solid #000" | RelatedSensors
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | Comma separated list of device numbers: archive a photo whenever one of the sensors is tripped.
+| style="border: 1px solid #000" | RelatedSensors
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | SensorArchiveSeconds
+| style="border: 1px solid #000" | Comma separated list of device numbers: archive a photo whenever one of the sensors is tripped.
- | style="border: 1px solid #000" | ui4
+|-
- | style="border: 1px solid #000" | How many seconds to archive the video after the sensor(s) are tripped.
+| style="border: 1px solid #000" | SensorArchiveSeconds
- |-
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | RelatedLights
+| style="border: 1px solid #000" | How many seconds to archive the video after the sensor(s) are tripped.
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | Comma separated list of device numbers: which lights should be turned on when viewing this camera.
+| style="border: 1px solid #000" | RelatedLights
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | LightOptions
+| style="border: 1px solid #000" | Comma separated list of device numbers: which lights should be turned on when viewing this camera.
- | style="border: 1px solid #000" | string
+|-
- | style="border: 1px solid #000" | When to turn on the lights:
+| style="border: 1px solid #000" | LightOptions
-* <tt>V</tt>: when I view the camera from the web or phone;
+| style="border: 1px solid #000" | string
-* <tt>S</tt>: when the sensor(s) above are tripped and they are armed;
+| style="border: 1px solid #000" | When to turn on the lights:
-* <tt>B</tt>: when the sensors above are tripped and they are *not* armed;
+*<tt>V</tt>: when I view the camera from the web or phone;
-* <tt>A</tt>: when you take an automatic picture for the archive;
+*<tt>S</tt>: when the sensor(s) above are tripped and they are armed;
+*<tt>B</tt>: when the sensors above are tripped and they are *not* armed;
+*<tt>A</tt>: when you take an automatic picture for the archive;
 So <tt>VSBA</tt> means do them all.
- |-
- | style="border: 1px solid #000" | AutoArchiveSeconds
+|-
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | AutoArchiveSeconds
- | style="border: 1px solid #000" | Archives a picture from the camera every this number of seconds.
+| style="border: 1px solid #000" | ui4
- |-
+| style="border: 1px solid #000" | Archives a picture from the camera every this number of seconds.
- | style="border: 1px solid #000" | AutoArchivePreserveDays
+|-
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | AutoArchivePreserveDays
- | style="border: 1px solid #000" | How many days to keep the pictures in the archive.
+| style="border: 1px solid #000" | ui4
- |-
+| style="border: 1px solid #000" | How many days to keep the pictures in the archive.
- | style="border: 1px solid #000" | Streams
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Streams
- | style="border: 1px solid #000" | Contains a list separated by semicolons, where each element in the list has the following format:
+| style="border: 1px solid #000" | string
-<code><stream type>,<protocol>,<url></code>
+| style="border: 1px solid #000" | Contains a list separated by semicolons, where each element in the list has the following format:
-* The ''stream types'' currently supported are: <tt>flv</tt>, <tt>flv_low</tt>, <tt>rtsp</tt>, <tt>rtsp_low</tt>.
+<code>&lt;stream type&gt;,&lt;protocol&gt;,&lt;url&gt;</code>
+*The ''stream types'' currently supported are: <tt>flv</tt>, <tt>flv_low</tt>, <tt>rtsp</tt>, <tt>rtsp_low</tt>.
 The types with the "_low" suffix are the low bandwidth versions, and are used when streaming through the relay servers.
-* The supported ''protocols'' are: <tt>http</tt>, <tt>rtsp</tt>.
+*The supported ''protocols'' are: <tt>http</tt>, <tt>rtsp</tt>.
 Example:
 <code>flv,http,/img/media.flv;rtsp,rtsp,/img/media.sav;flv_low,http,/img/media.flv?stream=2;rtsp_low,rtsp,/img/media.sav?stream=2</code>
- |}
-<br />
+|}
 == PanTiltZoom1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:PanTiltZoom1
-* '''File''': S_PanTiltZoom1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:PanTiltZoom1
+*'''File''': S_PanTiltZoom1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | MoveLeft
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|-
+| style="border: 1px solid #000" rowspan="1" | MoveRight
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|-
+| style="border: 1px solid #000" rowspan="1" | MoveUp
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|-
+| style="border: 1px solid #000" rowspan="1" | MoveDown
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|-
+| style="border: 1px solid #000" rowspan="1" | ZoomIn
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|-
+| style="border: 1px solid #000" rowspan="1" | ZoomOut
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|-
+| style="border: 1px solid #000" rowspan="1" | GoToPreset
+| style="border: 1px solid #000" | presetNumber
+| style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" rowspan="1" | Moves the camera to the given preset.
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
- ! style="border: 1px solid #000"               colspan="2" | Arguments
- ! style="border: 1px solid #000"               rowspan="2" | Description
- |-
- ! style="border: 1px solid #000; width: 130px"             | Name
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
- |-
- | style="border: 1px solid #000" rowspan="1" | MoveLeft
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |-
- | style="border: 1px solid #000" rowspan="1" | MoveRight
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |-
- | style="border: 1px solid #000" rowspan="1" | MoveUp
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |-
- | style="border: 1px solid #000" rowspan="1" | MoveDown
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |-
- | style="border: 1px solid #000" rowspan="1" | ZoomIn
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |-
- | style="border: 1px solid #000" rowspan="1" | ZoomOut
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |-
- | style="border: 1px solid #000" rowspan="1" | GoToPreset
- | style="border: 1px solid #000" | presetNumber
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" rowspan="1" | Moves the camera to the given preset.
- |}
 == SwitchPower1 ==
-* '''Service ID''': urn:upnp-org:serviceId:SwitchPower1
-* '''File''': S_SwitchPower1.xml
+*'''Service ID''': urn:upnp-org:serviceId:SwitchPower1
+*'''File''': S_SwitchPower1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | Target
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | The target state of the device.
- |-
- | style="border: 1px solid #000" | Status
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | The current state of the device.
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
-  ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+|-
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+! style="border: 1px solid #000;  width: 150px" | Variable
- ! style="border: 1px solid #000"               rowspan="2" | Description
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description
- ! style="border: 1px solid #000; width: 130px"             | Name
+|-
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+| style="border: 1px solid #000" | Target
- |-
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" rowspan="1" | SetTarget
+| style="border: 1px solid #000" | The target state of the device.
- | style="border: 1px solid #000" | newTargetValue
+|-
- | style="border: 1px solid #000" | Target
+| style="border: 1px solid #000" | Status
- | style="border: 1px solid #000" rowspan="1" | Sets the target state of the device. Used to turn a device On or Off.
+| style="border: 1px solid #000" | boolean
- |}
+| style="border: 1px solid #000" | The current state of the device.
+|}
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | SetTarget
+| style="border: 1px solid #000" | newTargetValue
+| style="border: 1px solid #000" | Target
+| style="border: 1px solid #000" rowspan="1" | Sets the target state of the device. Used to turn a device On or Off.
+|}
 == WindowCovering1 ==
-* '''Service ID''': urn:upnp-org:serviceId:WindowCovering1
-* '''File''': S_WindowCovering1.xml
+*'''Service ID''': urn:upnp-org:serviceId:WindowCovering1
+*'''File''': S_WindowCovering1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | Up
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|-
+| style="border: 1px solid #000" rowspan="1" | Down
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|-
+| style="border: 1px solid #000" rowspan="1" | Stop
+| style="border: 1px solid #000;  text-align: center" colspan="2" | none
+| style="border: 1px solid #000;  text-align: center" rowspan="1" | -
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
- ! style="border: 1px solid #000"               colspan="2" | Arguments
- ! style="border: 1px solid #000"               rowspan="2" | Description
- |-
- ! style="border: 1px solid #000; width: 130px"             | Name
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
- |-
- | style="border: 1px solid #000" rowspan="1" | Up
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |-
- | style="border: 1px solid #000" rowspan="1" | Down
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |-
- | style="border: 1px solid #000" rowspan="1" | Stop
- | style="border: 1px solid #000; text-align: center" colspan="2" | none
- | style="border: 1px solid #000; text-align: center" rowspan="1" | -
- |}
 == Dimming1 ==
-* '''Service ID''': urn:upnp-org:serviceId:Dimming1
-* '''File''': S_Dimming1.xml
+*'''Service ID''': urn:upnp-org:serviceId:Dimming1
+*'''File''': S_Dimming1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | LoadLevelTarget
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | The target dimming value; it doesn't represent the actual dimming state.
- |-
- | style="border: 1px solid #000" | LoadLevelStatus
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | Represents the actual dimming state.
- |-
- | style="border: 1px solid #000" | TurnOnBeforeDim
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | Indicates that this device needs to turn on before setting the dimming level.
- |-
- | style="border: 1px solid #000" | AllowZeroLevel
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | This device allows to set 0% level in ON state.
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
-  ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+|-
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+! style="border: 1px solid #000;  width: 150px" | Variable
- ! style="border: 1px solid #000" rowspan="2" | Description
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description
- ! style="border: 1px solid #000; width: 130px"             | Name
+|-
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+| style="border: 1px solid #000" | LoadLevelTarget
- |-
+| style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" rowspan="1" | SetLoadLevelTarget
+| style="border: 1px solid #000" | The target dimming value; it doesn't represent the actual dimming state.
- | style="border: 1px solid #000" | newLoadlevelTarget
+|-
- | style="border: 1px solid #000" | LoadLevelTarget
+| style="border: 1px solid #000" | LoadLevelStatus
- | style="border: 1px solid #000" rowspan="1" | Sets the desired dimming level. Used to adjust the dimming level of a device.
+| style="border: 1px solid #000" | ui1
- |}
+| style="border: 1px solid #000" | Represents the actual dimming state.
-<br />
+|-
+| style="border: 1px solid #000" | TurnOnBeforeDim
+| style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | Indicates that this device needs to turn on before setting the dimming level.
+|-
+| style="border: 1px solid #000" | AllowZeroLevel
+| style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | This device allows to set 0% level in ON state.
+|}
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | SetLoadLevelTarget
+| style="border: 1px solid #000" | newLoadlevelTarget
+| style="border: 1px solid #000" | LoadLevelTarget
+| style="border: 1px solid #000" rowspan="1" | Sets the desired dimming level. Used to adjust the dimming level of a device.
+|}
 == DoorLock1 ==
@@ Line 1,264: / Line 1,392: @@
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
 |-
-! style="border: 1px solid #000; width: 150px" | Variable
+! style="border: 1px solid #000;  width: 150px" | Variable
-! style="border: 1px solid #000; width: 60px" | Type
+! style="border: 1px solid #000;  width: 60px" | Type
-! style="border: 1px solid #000"               | Description
+! style="border: 1px solid #000" | Description
 |-
 | style="border: 1px solid #000" | Target
@@ Line 1,282: / Line 1,411: @@
 | style="border: 1px solid #000" | The list of PIN codes.
 Syntax:
   <VERSION=2>user_code_id,active,PIN_code(encrypted),name(a-z,0-9);
-  slot,slot_lock,w,[d|s],dow,hour_start,minute_start,hour_stop,minute_stop;
+  slot,slot_lock,w,[d&#124;s],dow,hour_start,minute_start,hour_stop,minute_stop;
-  slot,slot_lock,t,[d|s],start,stop;\t
+  slot,slot_lock,t,[d&#124;s],start,stop;\t
   <VERSION=3>next_available_user_code_id\t
   user_code_id,active,date_added,date_used,PIN_code(encrypted),name(a-z,0-9);
-  slot,slot_lock,w,[d|s],dow,hour_start,minute_start,hour_stop,minute_stop;
+  slot,slot_lock,w,[d&#124;s],dow,hour_start,minute_start,hour_stop,minute_stop;
-  slot,slot_lock,t,[d|s],start,stop;\t
+  slot,slot_lock,t,[d&#124;s],start,stop;\t
 Where:
-* <tt>VERSION</tt> is used to track syntax changes.
-* <tt>active</tt> can be one of the following values:
+*<tt>VERSION</tt> is used to track syntax changes.
-** <tt>0</tt> = The code isn't programmed.
+*<tt>active</tt> can be one of the following values:
-** <tt>1</tt> = The code is permanently programmed into the lock, which '''doesn't''' support hardware-based scheduling.
+**<tt>0</tt> = The code isn't programmed.
-** <tt>2</tt> = The code is permanently programmed into the lock, which '''does''' support hardware-based scheduling.
+**<tt>1</tt> = The code is permanently programmed into the lock, which '''doesn't''' support hardware-based scheduling.
-** <tt>3</tt> = The code is programmed into the lock and will be removed by software later.
+**<tt>2</tt> = The code is permanently programmed into the lock, which '''does''' support hardware-based scheduling.
-** <tt>4</tt> = The code is not programmed into the lock, but it will be programmed later by the software.
+**<tt>3</tt> = The code is programmed into the lock and will be removed by software later.
-** <tt>5</tt> = The code is programmed into the lock which supports hardware-based scheduling and will enable/disable it automatically.
+**<tt>4</tt> = The code is not programmed into the lock, but it will be programmed later by the software.
-* The <tt>slotid</tt> is an auto-incrementing number.
+**<tt>5</tt> = The code is programmed into the lock which supports hardware-based scheduling and will enable/disable it automatically.
-* The <tt>slotid_lock</tt> is the ID in the lock.
+*The <tt>slotid</tt> is an auto-incrementing number.
-* The restriction type: '''<tt>w</tt>''' (''weekly'') or '''<tt>d</tt>''' (''daily repeating'') = day of week based, '''<tt>t</tt>''' = time based (''yearly'')
+*The <tt>slotid_lock</tt> is the ID in the lock.
-* <tt>[d|s]</tt>: internal stuff.
+*The restriction type: '''<tt>w</tt>''' (''weekly'') or '''<tt>d</tt>''' (''daily repeating'') = day of week based, '''<tt>t</tt>''' = time based (''yearly'')
+*<tt>[d&#124;s]</tt>: internal stuff.
 |-
 | style="border: 1px solid #000" | NumSchedules
@@ Line 1,308: / Line 1,441: @@
 | style="border: 1px solid #000" | Maximum number of restrictions supported by the door lock.
 Syntax:
   max_weekly,max_yearly,max_daily_repeating
 Where:
-* <tt>max_weekly</tt> is the number of weekly restrictions slots.
-* <tt>max_yearly</tt> is the number of yearly restrictions slots.
+*<tt>max_weekly</tt> is the number of weekly restrictions slots.
-* <tt>max_daily_repeating</tt> is the number of daily repeating restrictions slots.
+*<tt>max_yearly</tt> is the number of yearly restrictions slots.
+*<tt>max_daily_repeating</tt> is the number of daily repeating restrictions slots.
 |-
 | style="border: 1px solid #000" | MinPinSize ''and'' MaxPinSize
@@ Line 1,322: / Line 1,459: @@
 | style="border: 1px solid #000" | Contains information about the last used PIN code:
   UserID="<pin_slot>" UserName="<pin_code_name>"
 |-
 | style="border: 1px solid #000" | sl_PinFailed
@@ Line 1,361: / Line 1,499: @@
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
 |-
-! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
 ! style="border: 1px solid #000" colspan="2" | Arguments
 ! style="border: 1px solid #000" rowspan="2" | Description
 |-
-! style="border: 1px solid #000; width: 130px" | Name
+! style="border: 1px solid #000;  width: 130px" | Name
-! style="border: 1px solid #000; width: 140px" | Type or Related Variable
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
 |-
 | style="border: 1px solid #000" rowspan="1" | SetTarget
@@ Line 1,379: / Line 1,518: @@
 | style="border: 1px solid #000" | string
 | style="border: 1px solid #000" rowspan="7" | Adds a PIN code. This code will be added to the <code>PinCodes</code> variable and to the door lock.
-* <code>UserCodeName</code> is the PIN code name.
+*<code>UserCodeName</code> is the PIN code name.
-* <code>newPin</code> is the new PIN code.
+*<code>newPin</code> is the new PIN code.
-* <code>user</code> is the PIN code slot number.
+*<code>user</code> is the PIN code slot number.
-* <code>purge</code>: if this is '''<tt>1</tt>''', all the schedules programmed into the door lock will be removed.
+*<code>purge</code>: if this is '''<tt>1</tt>''', all the schedules programmed into the door lock will be removed.
-* <code>json</code> is a json that looks like this:
+*<code>json</code> is a json that looks like this:
   {
-     "user_code" : {
+   "user_code"&nbsp;: {
-         "slot" : "<pin_slot>",        // Used when adding/updating a PIN code.
+       "slot"&nbsp;: "<pin_slot>",        // Used when adding/updating a PIN code.
-         "name" : "<name>",
+       "name"&nbsp;: "<name>",
-         "code" : "<pin_code>",
+       "code"&nbsp;: "<pin_code>",
-         "user" : "<restriction_slot>" // Used when adding/updating restrictions.
+       "user"&nbsp;: "<restriction_slot>" // Used when adding/updating restrictions.
-     },
+   },
-     "weekly_schedules" : [
+   "weekly_schedules"&nbsp;: [
-         {
+       {
-             "day_of_week" : "136"
+           "day_of_week"&nbsp;: "136"
-             "from_time" : "12:34"
+           "from_time"&nbsp;: "12:34"
-             "to_time" : "23:45"
+           "to_time"&nbsp;: "23:45"
-         },
+       },
-         {
+       {
-             "day_of_week" : "25"
+           "day_of_week"&nbsp;: "25"
-             "from_time" : "13:46"
+           "from_time"&nbsp;: "13:46"
-             "to_time" : "21:09"
+           "to_time"&nbsp;: "21:09"
-         }
+       }
-         ...
+       ...
-     ],
+   ],
-     "daily_schedules" : [
+   "daily_schedules"&nbsp;: [
-         {
+       {
-             "start_date" : "YYYY-MM-DD HH:MM:SS"
+           "start_date"&nbsp;: "YYYY-MM-DD HH:MM:SS"
-             "stop_date" : "YYYY-MM-DD HH:MM:SS"
+           "stop_date"&nbsp;: "YYYY-MM-DD HH:MM:SS"
-         },
+       },
-         {
+       {
-             "start_date" : "YYYY-MM-DD HH:MM:SS"
+           "start_date"&nbsp;: "YYYY-MM-DD HH:MM:SS"
-             "stop_date" : "YYYY-MM-DD HH:MM:SS"
+           "stop_date"&nbsp;: "YYYY-MM-DD HH:MM:SS"
-         }
+       }
-         ...
+       ...
-     ]
+   ]
   }
-** ''<tt>slot</tt>'' in <code>json</code> is equivalent to <code>user</code>
-** ''<tt>name</tt>'' in <code>json</code> is equivalent to <code>UserCodeName</code>
-** ''<tt>code</tt>'' in <code>json</code> is equivalent to <code>newPin</code>
+**''<tt>slot</tt>'' in <code>json</code> is equivalent to <code>user</code>
+**''<tt>name</tt>'' in <code>json</code> is equivalent to <code>UserCodeName</code>
+**''<tt>code</tt>'' in <code>json</code> is equivalent to <code>newPin</code>
-If the <code>json</code> parameter is present, <code>user</code>, <code>UserCodeName</code> and <code>newPin</code> are ignored.
+<br/>If the <code>json</code> parameter is present, <code>user</code>, <code>UserCodeName</code> and <code>newPin</code> are ignored.
+<br/><sup>*</sup> The parameters from <code>SetPinValidityDate</code> and <code>SetPinValidityWeekly</code> are also accepted. Internally, this action calls the implementation functions of those actions if <code>StartDate</code>, respectively <code>DayOfWeek</code> parameters are given. The parameters in the <code>json</code> take precedence over the other parameters.
-<sup>*</sup> The parameters from <code>SetPinValidityDate</code> and <code>SetPinValidityWeekly</code> are also accepted. Internally, this action calls the implementation functions of those actions if <code>StartDate</code>, respectively <code>DayOfWeek</code> parameters are given. The parameters in the <code>json</code> take precedence over the other parameters.
 |-
 | style="border: 1px solid #000" | newPin
@@ Line 1,446: / Line 1,586: @@
 | style="border: 1px solid #000" | ui1
 | style="border: 1px solid #000" rowspan="4" | Sets the daily time interval in which a PIN code is valid.
-* <tt>UserCode</tt> is the PIN code slot number. The starting slot number is 1.
+*<tt>UserCode</tt> is the PIN code slot number. The starting slot number is 1.
-* <tt>StartDate</tt> and <tt>StopDate</tt> are strings representing the dates, formatted like this: <tt>YYYY-MM-DD HH:MM:SS</tt> (SQL DATETIME)
+*<tt>StartDate</tt> and <tt>StopDate</tt> are strings representing the dates, formatted like this: <tt>YYYY-MM-DD HH:MM:SS</tt> (SQL DATETIME)
-* <tt>Replace</tt>: If this parameter is "1" the current restriction is replaced with the new one. Otherwise a new restriction is added, unless there are no more available restriction slots.
+*<tt>Replace</tt>: If this parameter is "1" the current restriction is replaced with the new one. Otherwise a new restriction is added, unless there are no more available restriction slots.
-Example:
-http://192.168.81.1:3480/data_request?id=action&DeviceNum=6&serviceId=urn:micasaverde-com:serviceId:DoorLock1&action=SetPinValidityDate&UserCode=1&StartDate=2012-09-03%2014:00:00&StopDate=2012-09-03%2015:00:00&Replace=1
+Example: [http://192.168.81.1:3480/data_request?id=action&DeviceNum=6&serviceId=urn:micasaverde-com:serviceId:DoorLock1&action=SetPinValidityDate&UserCode=1&StartDate=2012-09-03%2014:00:00&StopDate=2012-09-03%2015:00:00&Replace=1 http://192.168.81.1:3480/data_request?id=action&amp;DeviceNum=6&amp;serviceId=urn:micasaverde-com:serviceId:DoorLock1&amp;action=SetPinValidityDate&amp;UserCode=1&amp;StartDate=2012-09-03%2014:00:00&amp;StopDate=2012-09-03%2015:00:00&amp;Replace=1]
 |-
 | style="border: 1px solid #000" | StartDate
@@ Line 1,465: / Line 1,606: @@
 | style="border: 1px solid #000" | ui1
 | style="border: 1px solid #000" rowspan="7" | Sets the weekly time interval in which a PIN code is valid.
-* <tt>UserCode</tt> is the PIN code slot number. The starting slot number is 1.
+*<tt>UserCode</tt> is the PIN code slot number. The starting slot number is 1.
-* <tt>DayOfWeek</tt> contains the days of week numbers when the PIN code is restricted. Monday is '<tt>1</tt>' and Sunday is '<tt>7</tt>'.
+*<tt>DayOfWeek</tt> contains the days of week numbers when the PIN code is restricted. Monday is '<tt>1</tt>' and Sunday is '<tt>7</tt>'.
 Example: <tt>1367</tt> means Monday, Wednesday, Saturday and Sunday.
-* <tt>StartHour</tt> is the hour the restriction starts at.
-* <tt>StartMinute</tt> is the minute the restriction starts at.
+*<tt>StartHour</tt> is the hour the restriction starts at.
-* <tt>StopHour</tt> is the hour the restriction stops at.
+*<tt>StartMinute</tt> is the minute the restriction starts at.
-* <tt>StopMinute</tt> is the minute the restriction stops at.
+*<tt>StopHour</tt> is the hour the restriction stops at.
-* <tt>Replace</tt>: If this parameter is "1" the current restriction is replaced with the new one. Otherwise a new restriction is added, unless there are no more available restriction slots.
+*<tt>StopMinute</tt> is the minute the restriction stops at.
-Example:
+*<tt>Replace</tt>: If this parameter is "1" the current restriction is replaced with the new one. Otherwise a new restriction is added, unless there are no more available restriction slots.
-http://192.168.81.1:3480/data_request?id=action&DeviceNum=6&serviceId=urn:micasaverde-com:serviceId:DoorLock1&action=SetPinValidityWeekly&UserCode=1&DayOfWeek=1367&StartHour=15&StartMinute=31&StopHour=16&StopMinute=42&Replace=1
+Example: [http://192.168.81.1:3480/data_request?id=action&DeviceNum=6&serviceId=urn:micasaverde-com:serviceId:DoorLock1&action=SetPinValidityWeekly&UserCode=1&DayOfWeek=1367&StartHour=15&StartMinute=31&StopHour=16&StopMinute=42&Replace=1 http://192.168.81.1:3480/data_request?id=action&amp;DeviceNum=6&amp;serviceId=urn:micasaverde-com:serviceId:DoorLock1&amp;action=SetPinValidityWeekly&amp;UserCode=1&amp;DayOfWeek=1367&amp;StartHour=15&amp;StartMinute=31&amp;StopHour=16&amp;StopMinute=42&amp;Replace=1]
 |-
 | style="border: 1px solid #000" | DayOfWeek
@@ Line 1,498: / Line 1,642: @@
 | style="border: 1px solid #000" | ui4
 | style="border: 1px solid #000" rowspan="2" | Clears the given restriction slot.
-* <tt>UserCode</tt> is the PIN code slot number. The starting slot number is 1.
+*<tt>UserCode</tt> is the PIN code slot number. The starting slot number is 1.
-* <tt>slotID</tt> is the restriction slot number. The starting slot number is 1.
+*<tt>slotID</tt> is the restriction slot number. The starting slot number is 1.
 |-
 | style="border: 1px solid #000" | slotID
@@ Line 1,509: / Line 1,654: @@
 | style="border: 1px solid #000" rowspan="1" | Removes the PIN code from slot <tt>UserCode</tt>.
 |}
-<br />
 == HVAC_UserOperatingMode1 ==
-* '''Service ID''': urn:upnp-org:serviceId:HVAC_UserOperatingMode1
-* '''File''': S_HVAC_UserOperatingMode1.xml
+*'''Service ID''': urn:upnp-org:serviceId:HVAC_UserOperatingMode1
+*'''File''': S_HVAC_UserOperatingMode1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | ModeTarget
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The desired operating mode of the HVAC. Currently MiOS supports only:
-* Off
-* HeatOn
-* CoolOn
-* AutoChangeOver
- |-
- | style="border: 1px solid #000" | ModeStatus
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The actual operating mode of the HVAC.
- |-
- | style="border: 1px solid #000" | EnergyModeTarget
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The desired energy mode. Can be <tt>Normal</tt> or <tt>EnergySavingsMode</tt>.
- |-
- | style="border: 1px solid #000" | EnergyModeStatus
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The actual energy mode.
- |-
- | style="border: 1px solid #000" | AutoMode
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | If specified, and if 0, the thermostat doesn't support auto mode.
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
-  ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+|-
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+! style="border: 1px solid #000;  width: 150px" | Variable
- ! style="border: 1px solid #000"               rowspan="2" | Description
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description
- ! style="border: 1px solid #000; width: 130px"             | Name
+|-
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+| style="border: 1px solid #000" | ModeTarget
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" rowspan="1" | SetModeTarget
+| style="border: 1px solid #000" | The desired operating mode of the HVAC. Currently MiOS supports only:
- | style="border: 1px solid #000" | NewModeTarget
+*Off
- | style="border: 1px solid #000" | ModeTarget
+*HeatOn
- | style="border: 1px solid #000" rowspan="1" | Sets the desired HVAC operating mode.
+*CoolOn
- |-
+*AutoChangeOver
- | style="border: 1px solid #000" rowspan="1" | SetEnergyModeTarget
- | style="border: 1px solid #000" | NewModeTarget
+|-
- | style="border: 1px solid #000" | EnergyModeTarget
+| style="border: 1px solid #000" | ModeStatus
- | style="border: 1px solid #000" rowspan="1" | Sets the desired energy mode.
+| style="border: 1px solid #000" | string
- |}
+| style="border: 1px solid #000" | The actual operating mode of the HVAC.
+|-
+| style="border: 1px solid #000" | EnergyModeTarget
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | The desired energy mode. Can be <tt>Normal</tt> or <tt>EnergySavingsMode</tt>.
+|-
+| style="border: 1px solid #000" | EnergyModeStatus
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | The actual energy mode.
+|-
+| style="border: 1px solid #000" | AutoMode
+| style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | If specified, and if 0, the thermostat doesn't support auto mode.
+|}
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | SetModeTarget
+| style="border: 1px solid #000" | NewModeTarget
+| style="border: 1px solid #000" | ModeTarget
+| style="border: 1px solid #000" rowspan="1" | Sets the desired HVAC operating mode.
+|-
+| style="border: 1px solid #000" rowspan="1" | SetEnergyModeTarget
+| style="border: 1px solid #000" | NewModeTarget
+| style="border: 1px solid #000" | EnergyModeTarget
+| style="border: 1px solid #000" rowspan="1" | Sets the desired energy mode.
+|}
 == HVAC_OperatingState1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:HVAC_OperatingState1
-* '''File''': S_HVAC_OperatingState1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:HVAC_OperatingState1
+*'''File''': S_HVAC_OperatingState1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" | Variable
+! style="border: 1px solid #000;  width: 60px" | Type
+! style="border: 1px solid #000" | Description
+|-
+| style="border: 1px solid #000" | ModeState
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Represents what the HVAC is actually doing right now. The most common actions are:
+*Idle
+*Heating
+*Cooling
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | ModeState
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Represents what the HVAC is actually doing right now. The most common actions are:
-* Idle
-* Heating
-* Cooling
- |}
 == HVAC_FanOperatingMode1 ==
-* '''Service ID''': urn:upnp-org:serviceId:HVAC_FanOperatingMode1
-* '''File''': S_HVAC_FanOperatingMode1.xml
+*'''Service ID''': urn:upnp-org:serviceId:HVAC_FanOperatingMode1
+*'''File''': S_HVAC_FanOperatingMode1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | Mode
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The fan operation mode. Can be:
-* Auto
-* ContinuousOn
-* PeriodicOn
- |-
- | style="border: 1px solid #000" | FanStatus
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Represents the current fan state; can be ''On'' or ''Off''.
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
-  ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+|-
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+! style="border: 1px solid #000;  width: 150px" | Variable
- ! style="border: 1px solid #000"               rowspan="2" | Description
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description
- ! style="border: 1px solid #000; width: 130px"             | Name
+|-
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+| style="border: 1px solid #000" | Mode
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" rowspan="1" | SetMode
+| style="border: 1px solid #000" | The fan operation mode. Can be:
- | style="border: 1px solid #000" | NewMode
+*Auto
- | style="border: 1px solid #000" | Mode
+*ContinuousOn
- | style="border: 1px solid #000" rowspan="1" | Sets the fan operating mode. Changes the Mode variable.
+*PeriodicOn
- |}
+|-
+| style="border: 1px solid #000" | FanStatus
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Represents the current fan state; can be ''On'' or ''Off''.
+|}
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | SetMode
+| style="border: 1px solid #000" | NewMode
+| style="border: 1px solid #000" | Mode
+| style="border: 1px solid #000" rowspan="1" | Sets the fan operating mode. Changes the Mode variable.
+|}
 == TemperatureSetpoint1 ==
-* '''Service ID''': urn:upnp-org:serviceId:TemperatureSetpoint1
-* '''File''': S_TemperatureSetpoint1.xml
+*'''Service ID''': urn:upnp-org:serviceId:TemperatureSetpoint1
+*'''File''': S_TemperatureSetpoint1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
+{| style="border: 1px solid #000;  border-collapse: collapse"
- ! style="border: 1px solid #000"               | Description
+|-
- |-
+! style="border: 1px solid #000;  width: 150px" | Variable
- | style="border: 1px solid #000" | SetpointTarget
+! style="border: 1px solid #000;  width: 60px" | Type
- | style="border: 1px solid #000" | i4
+! style="border: 1px solid #000" | Description
- | style="border: 1px solid #000" | The target temperature setpoint for the current thermostat mode.
+|-
- |-
+| style="border: 1px solid #000" | SetpointTarget
- | style="border: 1px solid #000" | CurrentSetpoint
+| style="border: 1px solid #000" | i4
- | style="border: 1px solid #000" | i4
+| style="border: 1px solid #000" | The target temperature setpoint for the current thermostat mode.
- | style="border: 1px solid #000" | The actual temperature setpoint for the current thermostat mode.
+|-
- |-
+| style="border: 1px solid #000" | CurrentSetpoint
- | style="border: 1px solid #000" | AllSetpoints
+| style="border: 1px solid #000" | i4
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | The actual temperature setpoint for the current thermostat mode.
- | style="border: 1px solid #000" | A comma separated list containing the current setpoints for the following thermostat modes: heat, cool, auto.
+|-
+| style="border: 1px solid #000" | AllSetpoints
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | A comma separated list containing the current setpoints for the following thermostat modes: heat, cool, auto.
 Format: <code>HEAT,COOL,AUTO</code>
 Example: <code>AllSetpoints = 72,74,73</code>
-* 72 = heating setpoint
-* 74 = cooling setpoint
+*72 = heating setpoint
-* 73 = auto mode setpoint
+*74 = cooling setpoint
- |-
+*73 = auto mode setpoint
- | style="border: 1px solid #000" | AutoMode
- | style="border: 1px solid #000" | i4
+|-
- | style="border: 1px solid #000" | If specified, the thermostat doesn't support auto setpoint, so set heat+cool this many degrees +/-
+| style="border: 1px solid #000" | AutoMode
- |-
+| style="border: 1px solid #000" | i4
- | style="border: 1px solid #000" | ReportMode
+| style="border: 1px solid #000" | If specified, the thermostat doesn't support auto setpoint, so set heat+cool this many degrees +/-
- | style="border: 1px solid #000" | char
+|-
- | style="border: 1px solid #000" | "M"  = The report correspond to the current mode of operation and should update the setpoint in the received mode (default),
+| style="border: 1px solid #000" | ReportMode
+| style="border: 1px solid #000" | char
+| style="border: 1px solid #000" | "M" = The report correspond to the current mode of operation and should update the setpoint in the received mode (default),
 "S" = The report correspond to the current operating state and should update the setpoint in the current mode
- |}
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+{| style="border: 1px solid #000;  border-collapse: collapse"
- ! style="border: 1px solid #000"               rowspan="2" | Description
+|-
- |-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
- ! style="border: 1px solid #000; width: 130px"             | Name
+! style="border: 1px solid #000" colspan="2" | Arguments
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+! style="border: 1px solid #000" rowspan="2" | Description
- |-
+|-
- | style="border: 1px solid #000" rowspan="1" | SetCurrentSetpoint
+! style="border: 1px solid #000;  width: 130px" | Name
- | style="border: 1px solid #000" | NewCurrentSetpoint
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
- | style="border: 1px solid #000" | CurrentSetpoint
+|-
- | style="border: 1px solid #000" rowspan="1" | Sets the target setpoint.
+| style="border: 1px solid #000" rowspan="1" | SetCurrentSetpoint
- |}
+| style="border: 1px solid #000" | NewCurrentSetpoint
+| style="border: 1px solid #000" | CurrentSetpoint
+| style="border: 1px solid #000" rowspan="1" | Sets the target setpoint.
+|}
 == TemperatureSensor1 ==
-* '''Service ID''': urn:upnp-org:serviceId:TemperatureSensor1
-* '''File''': S_TemperatureSensor1.xml
+*'''Service ID''': urn:upnp-org:serviceId:TemperatureSensor1
+*'''File''': S_TemperatureSensor1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" | Variable
+! style="border: 1px solid #000;  width: 60px" | Type
+! style="border: 1px solid #000" | Description
+|-
+| style="border: 1px solid #000" | CurrentTemperature
+| style="border: 1px solid #000" | i4
+| style="border: 1px solid #000;  text-align: center" | -
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | CurrentTemperature
- | style="border: 1px solid #000" | i4
- | style="border: 1px solid #000; text-align: center" | -
- |}
 == GenericSensor1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:GenericSensor1
-* '''File''': S_GenericSensor1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:GenericSensor1
+*'''File''': S_GenericSensor1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" | Variable
+! style="border: 1px solid #000;  width: 60px" | Type
+! style="border: 1px solid #000" | Description
+|-
+| style="border: 1px solid #000" | CurrentLevel
+| style="border: 1px solid #000" | i4
+| style="border: 1px solid #000;  text-align: center" | -
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | CurrentLevel
- | style="border: 1px solid #000" | i4
- | style="border: 1px solid #000; text-align: center" | -
- |}
 == LightSensor1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:LightSensor1
-* '''File''': S_LightSensor1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:LightSensor1
+*'''File''': S_LightSensor1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" | Variable
+! style="border: 1px solid #000;  width: 60px" | Type
+! style="border: 1px solid #000" | Description
+|-
+| style="border: 1px solid #000" | CurrentLevel
+| style="border: 1px solid #000" | i4
+| style="border: 1px solid #000;  text-align: center" | -
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | CurrentLevel
- | style="border: 1px solid #000" | i4
- | style="border: 1px solid #000; text-align: center" | -
- |}
 == HumiditySensor1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:HumiditySensor1
-* '''File''': S_HumiditySensor1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:HumiditySensor1
+*'''File''': S_HumiditySensor1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" | Variable
+! style="border: 1px solid #000;  width: 60px" | Type
+! style="border: 1px solid #000" | Description
+|-
+| style="border: 1px solid #000" | CurrentLevel
+| style="border: 1px solid #000" | i4
+| style="border: 1px solid #000;  text-align: center" | -
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | CurrentLevel
- | style="border: 1px solid #000" | i4
- | style="border: 1px solid #000; text-align: center" | -
- |}
 == SecuritySensor1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:SecuritySensor1
-* '''File''': S_SecuritySensor1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:SecuritySensor1
+*'''File''': S_SecuritySensor1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | Tripped
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000; text-align: center" | -
- |-
- | style="border: 1px solid #000" | Armed
- | style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | This is used by MiOS as a way to disable sending notifications when a sensor is tripped/untripped.
- |-
- | style="border: 1px solid #000" | LastTrip
- | style="border: 1px solid #000" | i4
- | style="border: 1px solid #000" | This is the UNIX time when the sensor last reported that it was tripped.
- |-
- | style="border: 1px solid #000" | IgnoreTripTime
- | style="border: 1px solid #000" | i4
- | style="border: 1px solid #000" | This is used to filter trip events, the value specify the time in seconds of the filter, internally it will record the last event and after the time has elapsed it will set the variable Tripped to the last known event recorded.
- |-
- | style="border: 1px solid #000" | AutoUntrip
- | style="border: 1px solid #000" | i4
- | style="border: 1px solid #000" | This is used for those devices that doesn't send the Untrip command and requires to automatically untrip after certain time. The value correspond to the time in seconds that the controller will set the Tripped variable to 0 after a Trip event. To disable this feature, set the variable to 0 or remove it from the device.
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
-  ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+|-
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+! style="border: 1px solid #000;  width: 150px" | Variable
- ! style="border: 1px solid #000"               rowspan="2" | Description
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description
- ! style="border: 1px solid #000; width: 130px"             | Name
+|-
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+| style="border: 1px solid #000" | Tripped
- |-
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" rowspan="1" | SetArmed
+| style="border: 1px solid #000;  text-align: center" | -
- | style="border: 1px solid #000" | newArmedValue
+|-
- | style="border: 1px solid #000" | Armed
+| style="border: 1px solid #000" | Armed
- | style="border: 1px solid #000" rowspan="1" | Arms or disarms the sensor.
+| style="border: 1px solid #000" | boolean
- |}
+| style="border: 1px solid #000" | This is used by MiOS as a way to disable sending notifications when a sensor is tripped/untripped.
+|-
+| style="border: 1px solid #000" | LastTrip
+| style="border: 1px solid #000" | i4
+| style="border: 1px solid #000" | This is the UNIX time when the sensor last reported that it was tripped.
+|-
+| style="border: 1px solid #000" | IgnoreTripTime
+| style="border: 1px solid #000" | i4
+| style="border: 1px solid #000" | This is used to filter trip events, the value specify the time in seconds of the filter, internally it will record the last event and after the time has elapsed it will set the variable Tripped to the last known event recorded.
+|-
+| style="border: 1px solid #000" | AutoUntrip
+| style="border: 1px solid #000" | i4
+| style="border: 1px solid #000" | This is used for those devices that doesn't send the Untrip command and requires to automatically untrip after certain time. The value correspond to the time in seconds that the controller will set the Tripped variable to 0 after a Trip event. To disable this feature, set the variable to 0 or remove it from the device.
+|}
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | SetArmed
+| style="border: 1px solid #000" | newArmedValue
+| style="border: 1px solid #000" | Armed
+| style="border: 1px solid #000" rowspan="1" | Arms or disarms the sensor.
+|}
 == EnergyMetering1 ==
@@ Line 1,822: / Line 2,016: @@
 | style="border: 1px solid #000" | Comma separated list of values:
 <code>CurrentConsumption,Average,Peak,LastReading,Seconds</code>
-* ''LastReading'' is the Unix time.
-* ''Seconds'' is the period of time the ''Average'' value was computed for.
+*''LastReading'' is the Unix time.
+*''Seconds'' is the period of time the ''Average'' value was computed for.
 |}
@@ Line 1,841: / Line 2,037: @@
 | style="border: 1px solid #000" rowspan="1" | -
 |}
-<br />
 == IrTransmitter1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:IrTransmitter1
-* '''File''': S_IrTransmitter1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:IrTransmitter1
+*'''File''': S_IrTransmitter1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="1" | SendProntoCode
+| style="border: 1px solid #000" | ProntoCode
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" rowspan="1" | Sends the given IR code.
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
- ! style="border: 1px solid #000"               colspan="2" | Arguments
- ! style="border: 1px solid #000"               rowspan="2" | Description
- |-
- ! style="border: 1px solid #000; width: 130px"             | Name
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
- |-
- | style="border: 1px solid #000" rowspan="1" | SendProntoCode
- | style="border: 1px solid #000" | ProntoCode
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" rowspan="1" | Sends the given IR code.
- |}
 == SerialPort1 ==
-* '''Service ID''': urn:micasaverde-org:serviceId:SerialPort1
-* '''File''': S_SerialPort1.xml
+*'''Service ID''': urn:micasaverde-org:serviceId:SerialPort1
+*'''File''': S_SerialPort1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" | Variable
+! style="border: 1px solid #000;  width: 60px" | Type
+! style="border: 1px solid #000" | Description
+|-
+| style="border: 1px solid #000" | path
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | The path of the serial port. On Vera Lite it's <tt>/dev/ttyUSB0</tt>
+|-
+| style="border: 1px solid #000" | baud
+| style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | The baud rate.
+|-
+| style="border: 1px solid #000" | stopbits
+| style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | The number of stop bits.
+|-
+| style="border: 1px solid #000" | databits
+| style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | The number of data bits.
+|-
+| style="border: 1px solid #000" | parity
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | Can be <tt>odd</tt> or <tt>even</tt>.
+|}
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | path
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | The path of the serial port. On Vera Lite it's <tt>/dev/ttyUSB0</tt>
- |-
- | style="border: 1px solid #000" | baud
- | style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | The baud rate.
- |-
- | style="border: 1px solid #000" | stopbits
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | The number of stop bits.
- |-
- | style="border: 1px solid #000" | databits
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | The number of data bits.
- |-
- | style="border: 1px solid #000" | parity
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Can be <tt>odd</tt> or <tt>even</tt>.
- |}
 == SceneController1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:SceneController1
-* '''File''': S_SceneController1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:SceneController1
+*'''File''': S_SceneController1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
+{| style="border: 1px solid #000;  border-collapse: collapse"
- ! style="border: 1px solid #000"               | Description
+|-
- |-
+! style="border: 1px solid #000;  width: 150px" | Variable
- | style="border: 1px solid #000" | sl_SceneActivated
+! style="border: 1px solid #000;  width: 60px" | Type
- | style="border: 1px solid #000" | ui2
+! style="border: 1px solid #000" | Description
- | style="border: 1px solid #000" | The number of the activated scene on the scene controller.
+|-
- |-
+| style="border: 1px solid #000" | sl_SceneActivated
- | style="border: 1px solid #000" | sl_SceneDeactivated
+| style="border: 1px solid #000" | ui2
- | style="border: 1px solid #000" | ui2
+| style="border: 1px solid #000" | The number of the activated scene on the scene controller.
- | style="border: 1px solid #000" | The number of the deactivated scene on the scene controller.
+|-
- |-
+| style="border: 1px solid #000" | sl_SceneDeactivated
- | style="border: 1px solid #000" | Scenes
+| style="border: 1px solid #000" | ui2
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | The number of the deactivated scene on the scene controller.
- | style="border: 1px solid #000" | ?
+|-
- |-
+| style="border: 1px solid #000" | Scenes
- | style="border: 1px solid #000" | LastSceneID
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | &nbsp;?
- | style="border: 1px solid #000" | The scene ID (as reported by the scene controller) of the last activated or deactivated scene.
+|-
- |-
+| style="border: 1px solid #000" | LastSceneID
- | style="border: 1px solid #000" | LastSceneTime
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" | The scene ID (as reported by the scene controller) of the last activated or deactivated scene.
- | style="border: 1px solid #000" | The UNIX time when the scene was last activated or deactivated.
+|-
- |-
+| style="border: 1px solid #000" | LastSceneTime
- | style="border: 1px solid #000" | ManageLeds
+| style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | The UNIX time when the scene was last activated or deactivated.
- | style="border: 1px solid #000" | If this is "1", automatically turn on/off the scene indicator lights.
+|-
- |-
+| style="border: 1px solid #000" | ManageLeds
- | style="border: 1px solid #000" | NumButtons
+| style="border: 1px solid #000" | boolean
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | If this is "1", automatically turn on/off the scene indicator lights.
- | style="border: 1px solid #000" | This variable has the following format:
+|-
+| style="border: 1px solid #000" | NumButtons
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This variable has the following format:
 <code>NumberOfButtons[,ButtonNumber-AssociationNumber-SceneNumber=ButtonName[,ButtonNumber-AssociationNumber-SceneNumber=ButtonName[,etc.]]]</code>
 Where:
-* '''ButtonNumber''' must be from 1 to ''NumberOfButtons''.
-* '''AssociationNumber''' is the association group.
+*'''ButtonNumber''' must be from 1 to ''NumberOfButtons''.
-* '''SceneNumber''' is an event ID, and it's sent instead of the one we program.
+*'''AssociationNumber''' is the association group.
-* '''ButtonName''' is the user friendly name of the button.
+*'''SceneNumber''' is an event ID, and it's sent instead of the one we program.
+*'''ButtonName''' is the user friendly name of the button.
 Example:
 <code>2,1-1-1=Tap Button,2-2-2=Hold Button</code>
- |-
- | style="border: 1px solid #000" | ButtonMapping
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | ButtonMapping
- | style="border: 1px solid #000" | This variable has the following format:
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | This variable has the following format:
 <code>OldButtonNumber-Attribute-NewButtonNumber[,OldButtonNumber-Attribute-NewButtonNumber[,etc.]]</code>
 Where '''Attribute''' has the following meaning:
-* 0 = Key pressed
-* 1 = Key is released, sent only as a termination of a Key Held Down sequence
+*0 = Key pressed
-* 2 = Key held down
+*1 = Key is released, sent only as a termination of a Key Held Down sequence
-* 3 = Key double tapped <sup>1</sup>
+*2 = Key held down
-* 4 = Key triple tapped <sup>1</sup>
+*3 = Key double tapped <sup>1</sup>
+*4 = Key triple tapped <sup>1</sup>
 <sup>1</sup> These attributes were added in COMMAND_CLASS_CENTRAL_SCENE V2, so it's not available on all the scene controllers.
@@ Line 1,959: / Line 2,172: @@
 <code>1-0-1,1-3-2,2-0-3,2-3-4,3-0-5,3-3-6,4-0-7,4-3-8</code>
- |-
- | style="border: 1px solid #000" | SceneShortcuts
+|-
- | style="border: 1px solid #000" | string
+| style="border: 1px solid #000" | SceneShortcuts
- | style="border: 1px solid #000" | ?
+| style="border: 1px solid #000" | string
- |-
+| style="border: 1px solid #000" | &nbsp;?
- | style="border: 1px solid #000" | FiresOffEvents
+|-
- | style="border: 1px solid #000" | boolean
+| style="border: 1px solid #000" | FiresOffEvents
- | style="border: 1px solid #000" | ?
+| style="border: 1px solid #000" | boolean
- |-
+| style="border: 1px solid #000" | &nbsp;?
- | style="border: 1px solid #000" | ActivationMethod
+|-
- | style="border: 1px solid #000" | ui1
+| style="border: 1px solid #000" | ActivationMethod
- | style="border: 1px solid #000" | Z-Wave stuff.
+| style="border: 1px solid #000" | ui1
- |}
+| style="border: 1px solid #000" | Z-Wave stuff.
+|}
 == SceneControllerLED1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:SceneControllerLED1
-* '''File''': S_SceneControllerLED1.xml
+*'''Service ID''': urn:micasaverde-com:serviceId:SceneControllerLED1
+*'''File''': S_SceneControllerLED1.xml
-{| style="border: 1px solid #000; border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" | Variable
- ! style="border: 1px solid #000; width:  60px" | Type
- ! style="border: 1px solid #000"               | Description
- |-
- | style="border: 1px solid #000" | LightSettings
- | style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" | The lights' state. The lower 4 bits of <tt>LightSettings</tt> are the 4 green LEDs, and the upper 4 are the 4 red LEDs. So, 10001 is an orange light, 110010 is an orange light and a red, etc.
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
+{| style="border: 1px solid #000;  border-collapse: collapse"
- ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+|-
- ! style="border: 1px solid #000"               colspan="2" | Arguments
+! style="border: 1px solid #000;  width: 150px" | Variable
-  ! style="border: 1px solid #000"               rowspan="2" | Description
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description
- ! style="border: 1px solid #000; width: 130px"             | Name
+|-
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
+| style="border: 1px solid #000" | LightSettings
- |-
+| style="border: 1px solid #000" | ui1
- | style="border: 1px solid #000" rowspan="2" | SetLight
+| style="border: 1px solid #000" | The lights' state. The lower 4 bits of <tt>LightSettings</tt> are the 4 green LEDs, and the upper 4 are the 4 red LEDs. So, 10001 is an orange light, 110010 is an orange light and a red, etc.
- | style="border: 1px solid #000" | newValue
+|}
- | style="border: 1px solid #000" | ui4
- | style="border: 1px solid #000" rowspan="2" | Change a light's state.
-* <tt>newValue</tt> is the new light state. The valid values are:
-** 0 = off
-** 1 = green
-** 2 = red
-** 3 = orange
-* <tt>Indicator</tt> is the button number.
- |-
- | style="border: 1px solid #000" | Indicator
- | style="border: 1px solid #000" | ui4
- |}
-== IrDevice1 ==
-* '''Service ID''': urn:micasaverde-com:serviceId:IrDevice1
-* '''File''': S_IrDevice1.xml
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="2" | SetLight
+| style="border: 1px solid #000" | newValue
+| style="border: 1px solid #000" | ui4
+| style="border: 1px solid #000" rowspan="2" | Change a light's state.
+*<tt>newValue</tt> is the new light state. The valid values are:
+**0 = off
+**1 = green
+**2 = red
+**3 = orange
+*<tt>Indicator</tt> is the button number.
-{| style="border: 1px solid #000; border-collapse: collapse"
+|-
- ! style="border: 1px solid #000; width: 150px" | Variable
+| style="border: 1px solid #000" | Indicator
- ! style="border: 1px solid #000; width:  60px" | Type
+| style="border: 1px solid #000" | ui4
- ! style="border: 1px solid #000"               | Description
+|}
- |-
- | style="border: 1px solid #000" | Codesets
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" |
- |-
- | style="border: 1px solid #000" | Codeset
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" |
- |-
- | style="border: 1px solid #000" | Remote
- | style="border: 1px solid #000" | int
- | style="border: 1px solid #000" |
- |-
- | style="border: 1px solid #000" | Scene
- | style="border: 1px solid #000" | string
- | style="border: 1px solid #000" |
- |}
-{| style="border: 1px solid #000; border-collapse: collapse"
-  ! style="border: 1px solid #000; width: 150px" rowspan="2" | Action
+== IrDevice1<br/> ==
- ! style="border: 1px solid #000"               colspan="2" | Arguments
- ! style="border: 1px solid #000"               rowspan="2" | Description
+*'''Service ID''': urn:micasaverde-com:serviceId:IrDevice1
- |-
+*'''File''': S_IrDevice1.xml
- ! style="border: 1px solid #000; width: 130px"             | Name
- ! style="border: 1px solid #000; width: 140px"             | Type or Related Variable
- |-
- | style="border: 1px solid #000" rowspan="3" | SendCode
+{| style="border: 1px solid #000;  border-collapse: collapse"
- | style="border: 1px solid #000" | Codeset
+|-
- | style="border: 1px solid #000" | Codeset
+! style="border: 1px solid #000;  width: 150px" | Variable
- | style="border: 1px solid #000" rowspan="3" |
+! style="border: 1px solid #000;  width: 60px" | Type
- |-
+! style="border: 1px solid #000" | Description
- | style="border: 1px solid #000" | Button
+|-
- | style="border: 1px solid #000" | Remote
+| style="border: 1px solid #000" | Codesets
- |-
+| style="border: 1px solid #000" | string
- | style="border: 1px solid #000" | Repeat
+| style="border: 1px solid #000" |
- | style="border: 1px solid #000" | Remote
+|-
- |}
+| style="border: 1px solid #000" | Codeset
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" |
+|-
+| style="border: 1px solid #000" | Remote
+| style="border: 1px solid #000" | int
+| style="border: 1px solid #000" |
+|-
+| style="border: 1px solid #000" | Scene
+| style="border: 1px solid #000" | string
+| style="border: 1px solid #000" |
+|}
+{| style="border: 1px solid #000;  border-collapse: collapse"
+|-
+! style="border: 1px solid #000;  width: 150px" rowspan="2" | Action
+! style="border: 1px solid #000" colspan="2" | Arguments
+! style="border: 1px solid #000" rowspan="2" | Description
+|-
+! style="border: 1px solid #000;  width: 130px" | Name
+! style="border: 1px solid #000;  width: 140px" | Type or Related Variable
+|-
+| style="border: 1px solid #000" rowspan="3" | SendCode
+| style="border: 1px solid #000" | Codeset
+| style="border: 1px solid #000" | Codeset
+| style="border: 1px solid #000" rowspan="3" |
+|-
+| style="border: 1px solid #000" | Button
+| style="border: 1px solid #000" | Remote
+|-
+| style="border: 1px solid #000" | Repeat
+| style="border: 1px solid #000" | Remote<br/>
+|}
+== Color1<br/> ==
+*'''Service ID''': urn:micasaverde-com:serviceId:Color1
+*'''File''': S_Color1.xml
+{| style="width: 100%" cellspacing="1" cellpadding="1" border="1"
+|-
+! scope="col" | Variable<br/>
+! scope="col" | Type<br/>
+! scope="col" | Description<br/>
+|-
+| CurrentColor<br/>
+| string<br/>
+| <br/>
+|-
+| TargetColor<br/>
+| string<br/>
+| <br/>
+|-
+| ColorMode<br/>
+| string<br/>
+|
+Currently used only for Revogi.
+Can have only 2 values:
+*0 = Colorful mode
+*1 = Color temperature mode
+|-
+| ColorChannelPriorities<br/>
+| string<br/>
+|
+Specify the color channel priorities like this:
+<blockquote>0>1>2,3,4</blockquote>
+That value can be interpretted like this: channel 0 has priority over channel 1, which has priority over channels 2, 3 and 4.
+|-
+| SupportedColors<br/>
+| string<br/>
+| <br/>
+|}