Luup UPNP Files

From MiOS
(Difference between revisions)
Jump to: navigation, search
m (SwitchPower1)
m (Device Categories)
 
(54 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The following is the contents of the file "Constant.h" which defines the strings used for file device types, services, actions, variables, etc.
+
[[Category:Development]]
 +
The following is the contents of the file ''Constants.h'' which defines the strings used for file device types, services, actions, variables, etc.
  
 
<pre>/*
 
<pre>/*
Line 13: Line 14:
 
#define DEVICETYPE_DIMMABLE_LIGHT      "urn:schemas-upnp-org:device:DimmableLight:1"
 
#define DEVICETYPE_DIMMABLE_LIGHT      "urn:schemas-upnp-org:device:DimmableLight:1"
 
#define DEVICETYPE_THERMOSTAT          "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
 
#define DEVICETYPE_THERMOSTAT          "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
 +
#define DEVICETYPE_HEATER              "urn:schemas-upnp-org:device:Heater:1"
 
#define DEVICETYPE_HUMIDITY_SENSOR      "urn:schemas-micasaverde-com:device:HumiditySensor:1"
 
#define DEVICETYPE_HUMIDITY_SENSOR      "urn:schemas-micasaverde-com:device:HumiditySensor:1"
 
#define DEVICETYPE_MULTI_IO            "urn:schemas-micasaverde-com:device:MultiIO:1"
 
#define DEVICETYPE_MULTI_IO            "urn:schemas-micasaverde-com:device:MultiIO:1"
Line 25: Line 27:
 
#define DEVICETYPE_MOTION_SENSOR        "urn:schemas-micasaverde-com:device:MotionSensor:1"
 
#define DEVICETYPE_MOTION_SENSOR        "urn:schemas-micasaverde-com:device:MotionSensor:1"
 
#define DEVICETYPE_SMOKE_SENSOR        "urn:schemas-micasaverde-com:device:SmokeSensor:1"
 
#define DEVICETYPE_SMOKE_SENSOR        "urn:schemas-micasaverde-com:device:SmokeSensor:1"
 +
#define DEVICETYPE_GENERIC_SENSOR      "urn:schemas-micasaverde-com:device:GenericSensor:1"
 
#define DEVICETYPE_LIGHT_SENSOR        "urn:schemas-micasaverde-com:device:LightSensor:1"
 
#define DEVICETYPE_LIGHT_SENSOR        "urn:schemas-micasaverde-com:device:LightSensor:1"
 
#define DEVICETYPE_IR_TRANSMITTER      "urn:schemas-micasaverde-com:device:IrTransmitter:1"
 
#define DEVICETYPE_IR_TRANSMITTER      "urn:schemas-micasaverde-com:device:IrTransmitter:1"
Line 32: Line 35:
 
#define DEVICETYPE_COMBO_DEVICE        "urn:schemas-micasaverde-com:device:ComboDevice:1"
 
#define DEVICETYPE_COMBO_DEVICE        "urn:schemas-micasaverde-com:device:ComboDevice:1"
 
#define DEVICETYPE_CAMERA              "urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
 
#define DEVICETYPE_CAMERA              "urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
 +
#define DEVICETYPE_CAMERA2              "urn:schemas-upnp-org:device:DigitalSecurityCamera:2"
 
#define DEVICETYPE_SERIALPORT          "urn:micasaverde-org:device:SerialPort:1"
 
#define DEVICETYPE_SERIALPORT          "urn:micasaverde-org:device:SerialPort:1"
 
#define DEVICETYPE_SERIALPORTROOT      "urn:micasaverde-org:device:SerialPortRoot:1"
 
#define DEVICETYPE_SERIALPORTROOT      "urn:micasaverde-org:device:SerialPortRoot:1"
Line 37: Line 41:
 
#define DEVICETYPE_SCENE_CONTR_LED      "urn:schemas-micasaverde-com:device:SceneControllerLED:1"
 
#define DEVICETYPE_SCENE_CONTR_LED      "urn:schemas-micasaverde-com:device:SceneControllerLED:1"
 
#define DEVICETYPE_ENERGY_CALCULATOR    "urn:schemas-micasaverde-com:device:EnergyCalculator:1"
 
#define DEVICETYPE_ENERGY_CALCULATOR    "urn:schemas-micasaverde-com:device:EnergyCalculator:1"
#define DEVICETYPE_TEMP_LEAK_SENSOR    "urn:schemas-micasaverde-com:device:TemperatureLeakSensor:1"
+
#define DEVICETYPE_TEMP_LEAK_SENSOR    "urn:schemas-micasaverde-com:device:TempLeakSensor:1"
 +
#define DEVICETYPE_RELAY                "urn:schemas-micasaverde-com:device:Relay:1"
 +
#define DEVICETYPE_ALARMPANEL          "urn:schemas-micasaverde-com:device:AlarmPanel:1"
 +
#define DEVICETYPE_ALARMPARTITION1      "urn:schemas-micasaverde-com:device:AlarmPartition:1"
 +
#define DEVICETYPE_ALARMPARTITION2      "urn:schemas-micasaverde-com:device:AlarmPartition:2"
 +
#define DEVICETYPE_SIREN                "urn:schemas-micasaverde-com:device:Siren:1"
 +
#define DEVICETYPE_FLOOD_SENSOR        "urn:schemas-micasaverde-com:device:FloodSensor:1"
  
 
#define DEVICETYPE_SCENE                "urn:schemas-micasaverde-com:device:Scene:1"</pre>
 
#define DEVICETYPE_SCENE                "urn:schemas-micasaverde-com:device:Scene:1"</pre>
Line 55: Line 65:
 
#define DEVICETYPE_AV_MISC              "urn:schemas-micasaverde-com:device:avmisc:1"
 
#define DEVICETYPE_AV_MISC              "urn:schemas-micasaverde-com:device:avmisc:1"
 
#define DEVICETYPE_VIRTUAL_DEVICE      "urn:schemas-micasaverde-com:device:VirtualDevice:1"</pre>
 
#define DEVICETYPE_VIRTUAL_DEVICE      "urn:schemas-micasaverde-com:device:VirtualDevice:1"</pre>
 
  
 
== Device Files ==
 
== Device Files ==
Line 62: Line 71:
 
#define DEVICEFILE_DIMMABLE_LIGHT      "D_DimmableLight1.xml"
 
#define DEVICEFILE_DIMMABLE_LIGHT      "D_DimmableLight1.xml"
 
#define DEVICEFILE_THERMOSTAT          "D_HVAC_ZoneThermostat1.xml"
 
#define DEVICEFILE_THERMOSTAT          "D_HVAC_ZoneThermostat1.xml"
 +
#define DEVICEFILE_HEATER              "D_Heater1.xml"
 
#define DEVICEFILE_HUMIDITY_SENSOR      "D_HumiditySensor1.xml"
 
#define DEVICEFILE_HUMIDITY_SENSOR      "D_HumiditySensor1.xml"
 
#define DEVICEFILE_MULTI_IO            "D_GC100.xml"
 
#define DEVICEFILE_MULTI_IO            "D_GC100.xml"
Line 73: Line 83:
 
#define DEVICEFILE_MOTION_SENSOR        "D_MotionSensor1.xml"
 
#define DEVICEFILE_MOTION_SENSOR        "D_MotionSensor1.xml"
 
#define DEVICEFILE_SMOKE_SENSOR        "D_SmokeSensor1.xml"
 
#define DEVICEFILE_SMOKE_SENSOR        "D_SmokeSensor1.xml"
 +
#define DEVICEFILE_GENERIC_SENSOR      "D_GenericSensor1.xml"
 
#define DEVICEFILE_LIGHT_SENSOR        "D_LightSensor1.xml"
 
#define DEVICEFILE_LIGHT_SENSOR        "D_LightSensor1.xml"
 
#define DEVICEFILE_IR_TRANSMITTER      "D_IrTransmitter1.xml"
 
#define DEVICEFILE_IR_TRANSMITTER      "D_IrTransmitter1.xml"
Line 87: Line 98:
 
#define DEVICEFILE_AV_MISC              "D_AvMisc1.xml"
 
#define DEVICEFILE_AV_MISC              "D_AvMisc1.xml"
 
#define DEVICEFILE_TEMP_LEAK_SENSOR    "D_TempLeakSensor1.xml"
 
#define DEVICEFILE_TEMP_LEAK_SENSOR    "D_TempLeakSensor1.xml"
 +
#define DEVICEFILE_RELAY                "D_Relay1.xml"
 +
#define DEVICEFILE_SIREN                "D_Siren1.xml"
 +
#define DEVICEFILE_FLOOD_SENSOR        "D_FloodSensor1.xml"
  
 
#define DEVICEFILE_AV_SCENE            "D_Scene1.xml"</pre>
 
#define DEVICEFILE_AV_SCENE            "D_Scene1.xml"</pre>
 
  
 
== Device Categories ==
 
== Device Categories ==
 
+
See [[Luup Device Categories]].
<pre>#define DEVICE_CATEGORY_INTERFACE      1
+
#define DEVICE_CATEGORY_DIMMABLE_LIGHT  2
+
#define DEVICE_CATEGORY_SWITCH          3
+
#define DEVICE_CATEGORY_SECURITY_SENSOR 4
+
#define DEVICE_CATEGORY_HVAC            5
+
#define DEVICE_CATEGORY_CAMERA          6
+
#define DEVICE_CATEGORY_DOOR_LOCK      7
+
#define DEVICE_CATEGORY_WINDOW_COV      8
+
#define DEVICE_CATEGORY_REMOTE_CONTROL  9
+
#define DEVICE_CATEGORY_IR_TX          10
+
#define DEVICE_CATEGORY_GENERIC_IO      11
+
#define DEVICE_CATEGORY_GENERIC_SENSOR  12
+
#define DEVICE_CATEGORY_SERIAL_PORT    13
+
#define DEVICE_CATEGORY_SCENE_CONTROLLER 14
+
#define DEVICE_CATEGORY_AV              15
+
#define DEVICE_CATEGORY_HUMIDITY        16
+
#define DEVICE_CATEGORY_TEMPERATURE    17
+
#define DEVICE_CATEGORY_LIGHT_SENSOR    18
+
#define DEVICE_CATEGORY_ZWAVE_INT      19
+
#define DEVICE_CATEGORY_INSTEON_INT    20
+
#define DEVICE_CATEGORY_POWER_METER    21
+
 
+
#define DEVICE_CATEGORY_MAX            21</pre>
+
 
+
 
+
== Device Sub-Categories ==
+
<pre>#define DEVICE_SUBCATEGORY_NONE        0</pre>
+
 
+
=== Security ===
+
 
+
<pre>#define DEVICE_SUBCATEGORY_DOOR        1
+
#define DEVICE_SUBCATEGORY_LEAK        2
+
#define DEVICE_SUBCATEGORY_MOTION      3
+
#define DEVICE_SUBCATEGORY_SMOKE        4</pre>
+
 
+
=== IR ===
+
 
+
<pre>#define DEVICE_SUBCATEGORY_IRT          1
+
#define DEVICE_SUBCATEGORY_USBUIRT      2</pre>
+
 
+
  
 
== HaGateway ==
 
== HaGateway ==
 
Basic functionality for the gateway itself
 
Basic functionality for the gateway itself
  
<pre>#define HAGEVICE_FILE               "S_HomeAutomationGateway1.xml"
+
<pre>#define HAGEVICE_FILE                   "S_HomeAutomationGateway1.xml"
#define HAGEVICE_SID               "urn:micasaverde-com:serviceId:HomeAutomationGateway1"
+
#define HAGEVICE_SID                   "urn:micasaverde-com:serviceId:HomeAutomationGateway1"
#define HAGEVICE_STYPE             "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"</pre>
+
#define HAGEVICE_STYPE                 "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define HAG_ACTIVE_SCENES           "ActiveScenes"
+
<pre>#define HAG_ACTIVE_SCENES               "ActiveScenes"
#define HAG_DATAVERSION_USERDATA   "DataVersionUserData" // The current data version for user_data
+
#define HAG_DATAVERSION_USERDATA       "DataVersionUserData" // The current data version for user_data
#define HAG_DATAVERSION_STATUS     "DataVersionStatus" // The current data version for lu_status</pre>
+
#define HAG_DATAVERSION_STATUS         "DataVersionStatus" // The current data version for lu_status</pre>
  
 
=== Actions ===
 
=== Actions ===
<pre>#define HAG_GET_USER_DATA           "GetUserData"   
+
<pre>#define HAG_GET_USER_DATA "GetUserData"   
#define HAG_MODIFY_USER_DATA       "ModifyUserData"  
+
#define HAG_MODIFY_USER_DATA "ModifyUserData"  
#define HAG_MODIFY_GET_VARIABLE     "GetVariable"  
+
#define HAG_MODIFY_GET_VARIABLE "GetVariable"  
#define HAG_MODIFY_SET_VARIABLE     "SetVariable"  
+
#define HAG_MODIFY_SET_VARIABLE "SetVariable"  
#define HAG_MODIFY_GET_STATUS       "GetStatus"  
+
#define HAG_MODIFY_GET_STATUS "GetStatus"  
#define HAG_MODIFY_GET_ACTIONS     "GetActions"  
+
#define HAG_MODIFY_GET_ACTIONS "GetActions"  
#define HAG_MODIFY_CREATE_DEVICE   "CreateDevice"  
+
#define HAG_MODIFY_CREATE_DEVICE "CreateDevice"  
#define HAG_MODIFY_DELETE_DEVICE   "DeleteDevice"  
+
#define HAG_MODIFY_DELETE_DEVICE "DeleteDevice"  
#define HAG_MODIFY_CREATE_PLUGIN   "CreatePlugin"  
+
#define HAG_MODIFY_CREATE_PLUGIN "CreatePlugin"  
#define HAG_MODIFY_DELETE_PLUGIN   "DeletePlugin"  
+
#define HAG_MODIFY_DELETE_PLUGIN "DeletePlugin"  
#define HAG_MODIFY_CREATE_PLUGIN_DEVICE "CreatePluginDevice"  
+
#define HAG_MODIFY_CREATE_PLUGIN_DEVICE "CreatePluginDevice"  
#define HAG_IMPORT_UPNP_DEVICE     "ImportUpnpDevice"  
+
#define HAG_IMPORT_UPNP_DEVICE "ImportUpnpDevice"  
#define HAG_PROCESS_CHILD           "ProcessChildDevices"  
+
#define HAG_PROCESS_CHILD "ProcessChildDevices"  
#define HAG_RELOAD                 "Reload"  
+
#define HAG_RELOAD "Reload"  
#define HAG_RUN_SCENE               "RunScene"
+
#define HAG_RUN_SCENE "RunScene"
#define HAG_RUN_LUA                 "RunLua"
+
#define HAG_SCENE_OFF "SceneOff"
#define HAG_LOG_IP_REQUEST         "LogIpRequest"</pre>
+
#define HAG_RUN_LUA "RunLua"
 
+
#define HAG_LOG_IP_REQUEST "LogIpRequest"</pre>
  
 
== HaDevice ==
 
== HaDevice ==
 
Basic functionality for all home automation devices
 
Basic functionality for all home automation devices
  
<pre>#define HADEVICE_FILE               "S_HaDevice1.xml"
+
<pre>#define HADEVICE_FILE                   "S_HaDevice1.xml"
#define HADEVICE_SID               "urn:micasaverde-com:serviceId:HaDevice1"
+
#define HADEVICE_SID                   "urn:micasaverde-com:serviceId:HaDevice1"
#define HADEVICE_STYPE             "urn:schemas-micasaverde-com:service:HaDevice:1"</pre>
+
#define HADEVICE_STYPE                 "urn:schemas-micasaverde-com:service:HaDevice:1"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define HAD_ENERGY_LOG             "EnergyLog"        // DEVICEDATA_Energy_Log_CONST
+
<pre>#define HAD_ENERGY_LOG                 "EnergyLog"        // DEVICEDATA_Energy_Log_CONST
#define HAD_IOPORT_DEVICE           "IODevice"          // The device number to connect to for IO (this is on the master device)
+
#define HAD_IOPORT_DEVICE               "IODevice"          // The device number to connect to for IO (this is on the master device)
#define HAD_IOPORT_DEVICE_XREF     "IODeviceXRef"      // On the port, this is the device number that connects to it
+
#define HAD_IOPORT_DEVICE_XREF         "IODeviceXRef"      // On the port, this is the device number that connects to it
#define HAD_IOPORT_MAX_TIME         "MaxTime"          // The maximum time to leave the socket open before closing and re-opening
+
#define HAD_IOPORT_MAX_TIME             "MaxTime"          // The maximum time to leave the socket open before closing and re-opening
#define HAD_IOPORT_PORT             "IOPort"            // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
+
#define HAD_IOPORT_PORT                 "IOPort"            // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
#define HAD_IOPORT_PATH             "IOPortPath"        // Read-only, created at each boot, has the current path to the port
+
#define HAD_IOPORT_PATH                 "IOPortPath"        // Read-only, created at each boot, has the current path to the port
#define HAD_IGNORE_ROOM             "IgnoreRoom"        // DEVICEDATA_Room_Not_Required_CONST
+
#define HAD_IGNORE_ROOM                 "IgnoreRoom"        // DEVICEDATA_Room_Not_Required_CONST
#define HAD_COMM_FAILURE           "CommFailure"
+
#define HAD_COMM_FAILURE               "CommFailure"
#define HAD_POLLING_ENABLED         "PollingEnabled"
+
#define HAD_POLLING_ENABLED             "PollingEnabled"
#define HAD_POLL_MIN_DELAY         "PollMinDelay"
+
#define HAD_POLL_MIN_DELAY             "PollMinDelay"
#define HAD_CONFIGURED             "Configured"
+
#define HAD_CONFIGURED                 "Configured"
#define HAD_JOBID                   "JobID"
+
#define HAD_JOBID                       "JobID"
#define HAD_REVERSE                 "ReverseOnOff"      // DEVICEDATA_Reverse_CONST
+
#define HAD_REVERSE                     "ReverseOnOff"      // DEVICEDATA_Reverse_CONST
#define HAD_LAST_UPDATE             "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
+
#define HAD_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define HAD_LAST_ACTIVITY           "LastActivity"      // Used by the OPower plugin
+
#define HAD_LAST_ACTIVITY               "LastActivity"      // Used by the OPower plugin
#define HAD_AUTO_CONFIGURE         "AutoConfigure"    // DEVICEDATA_Auto_Configure_CONST
+
#define HAD_AUTO_CONFIGURE             "AutoConfigure"    // DEVICEDATA_Auto_Configure_CONST
#define HAD_LAST_TIME_CHECK         "LastTimeCheck"    // Only for devices that are capable of implementing time this is when the time was last checked
+
#define HAD_LAST_TIME_CHECK             "LastTimeCheck"    // Only for devices that are capable of implementing time this is when the time was last checked
#define HAD_LAST_TIME_OFFSET       "LastTimeOffset"    // For HAD_LAST_TIME_CHECK this is the timezone offset from UTC when the time was last checked
+
#define HAD_LAST_TIME_OFFSET           "LastTimeOffset"    // For HAD_LAST_TIME_CHECK this is the timezone offset from UTC when the time was last checked
#define HAD_FIRST_CONFIGURED       "FirstConfigured"  // The date this was first configured
+
#define HAD_FIRST_CONFIGURED           "FirstConfigured"  // The date this was first configured
#define HAD_BATTERY_LEVEL           "BatteryLevel"      // DEVICEDATA_Battery_Level_CONST
+
#define HAD_BATTERY_LEVEL               "BatteryLevel"      // DEVICEDATA_Battery_Level_CONST
#define HAD_BATTERY_DATE           "BatteryDate"      // The date when the battery level was reported
+
#define HAD_BATTERY_DATE               "BatteryDate"      // The date when the battery level was reported
#define HAD_BATTERY_ALARM           "BatteryAlarm"      // DEVICEDATA_Battery_Alarm_CONST
+
#define HAD_BATTERY_ALARM               "BatteryAlarm"      // DEVICEDATA_Battery_Alarm_CONST
#define HAD_DOCUMENTATION           "Documentation"   
+
#define HAD_DOCUMENTATION               "Documentation"   
#define HAD_ALARM                   "sl_Alarm"</pre>
+
#define HAD_ALARM                       "sl_Alarm"</pre>
  
 
=== Actions ===
 
=== Actions ===
<pre>#define HAD_RECONFIGURE             "Reconfigure"
+
<pre>#define HAD_RECONFIGURE                 "Reconfigure"
#define HAD_REMOVE                 "Remove"
+
#define HAD_REMOVE                     "Remove"
#define HAD_POLL                   "Poll"
+
#define HAD_POLL                       "Poll"
#define HAD_SET_POLL_FREQUENCY     "SetPollFrequency"
+
#define HAD_SET_POLL_FREQUENCY         "SetPollFrequency"
#define HAD_STRESS_TEST             "StressTest"
+
#define HAD_STRESS_TEST                 "StressTest"
#define HAD_TOGGLE_STATE           "ToggleState"</pre>
+
#define HAD_TOGGLE_STATE               "ToggleState"</pre>
  
  
Line 211: Line 184:
 
Basic functionality for all ZWave devices
 
Basic functionality for all ZWave devices
  
<pre>#define ZWN_FILE                   "S_ZWaveNetwork1.xml"
+
<pre>#define ZWN_FILE                       "S_ZWaveNetwork1.xml"
#define ZWN_SID                     "urn:micasaverde-com:serviceId:ZWaveNetwork1"
+
#define ZWN_SID                         "urn:micasaverde-com:serviceId:ZWaveNetwork1"
#define ZWN_STYPE                   "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"
+
#define ZWN_STYPE                       "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"
  
#define ZWN_RESET_NETWORK           "ResetNetwork"
+
#define ZWN_RESET_NETWORK               "ResetNetwork"
#define ZWN_RECONFIGURE_ALL         "ReconfigureAllNodes"
+
#define ZWN_RECONFIGURE_ALL             "ReconfigureAllNodes"
#define ZWN_REMOVE_NODES           "RemoveNodes"
+
#define ZWN_REMOVE_NODES               "RemoveNodes"
#define ZWN_ADD_NODES               "AddNodes"
+
#define ZWN_ADD_NODES                   "AddNodes"
#define ZWN_DOWNLOAD               "DownloadNetwork"
+
#define ZWN_DOWNLOAD                   "DownloadNetwork"
#define ZWN_HEAL_NETWORK           "HealNetwork"
+
#define ZWN_HEAL_NETWORK               "HealNetwork"
#define ZWN_UPDATE_NETWORK         "UpdateNetwork"
+
#define ZWN_UPDATE_NETWORK             "UpdateNetwork"
#define ZWN_UPDATE_NEIGHBORS       "UpdateNeighbors"
+
#define ZWN_UPDATE_NEIGHBORS           "UpdateNeighbors"
#define ZWN_SET_POLLING             "SetPolling"
+
#define ZWN_SET_POLLING                 "SetPolling"
#define ZWN_SEND_DATA               "SendData"
+
#define ZWN_SEND_DATA                   "SendData"
#define ZWN_POLL_ALL_NODES         "PollAllNodes"
+
#define ZWN_POLL_ALL_NODES             "PollAllNodes"
#define ZWN_SOFT_RESET             "SoftReset"
+
#define ZWN_SOFT_RESET                 "SoftReset"
#define ZWN_BACKUP_DONGLE           "BackupDongle"
+
#define ZWN_BACKUP_DONGLE               "BackupDongle"
#define ZWN_SCENE_IDS               "SceneIDs"          // For scene controllers, node#-button#=ZWaveSceneID,...
+
#define ZWN_SCENE_IDS                   "SceneIDs"          // For scene controllers, node#-button#=ZWaveSceneID,...
#define ZWN_PUT_BYTE               "PutByte"</pre>
+
#define ZWN_PUT_BYTE                   "PutByte"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define ZWN_LAST_UPDATE             "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
+
<pre>#define ZWN_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_HEAL               "LastHeal"          // DEVICEDATA_LastUpdate_CONST
+
#define ZWN_LAST_HEAL                   "LastHeal"          // DEVICEDATA_LastUpdate_CONST
#define ZWN_ROUTE_FAILURE           "LastRouteFailure"  // DEVICEDATA_LastUpdate_CONST
+
#define ZWN_ROUTE_FAILURE               "LastRouteFailure"  // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_DONGLE_BACKUP     "LastDongleBackup"
+
#define ZWN_LAST_DONGLE_BACKUP         "LastDongleBackup"
#define ZWN_NET_STATUS_ID           "NetStatusID"   
+
#define ZWN_NET_STATUS_ID               "NetStatusID"   
#define ZWN_NET_STATUS_TEXT         "NetStatusText"   
+
#define ZWN_NET_STATUS_TEXT             "NetStatusText"   
#define ZWN_COM_PORT               "ComPort"          // DEVICEDATA_COM_Port_on_PC_CONST
+
#define ZWN_COM_PORT                   "ComPort"          // DEVICEDATA_COM_Port_on_PC_CONST
#define ZWN_LOCK_COM_PORT           "LockComPort"   
+
#define ZWN_LOCK_COM_PORT               "LockComPort"   
#define ZWN_NODE_ID                 "NodeID"            // The dongle's id
+
#define ZWN_NODE_ID                     "NodeID"            // The dongle's id
#define ZWN_VERSION_INFO           "VersionInfo"
+
#define ZWN_VERSION_INFO               "VersionInfo"
#define ZWN_HOME_ID                 "HomeID"
+
#define ZWN_HOME_ID                     "HomeID"
#define ZWN_ROLE                   "Role"
+
#define ZWN_ROLE                       "Role"
#define ZWN_RESET_MODE             "ResetMode"
+
#define ZWN_RESET_MODE                 "ResetMode"
#define ZWN_INCLUSION_MODE         "InclusionMode"
+
#define ZWN_INCLUSION_MODE             "InclusionMode"
#define ZWN_NODETYPE               "NodeType"
+
#define ZWN_NODETYPE                   "NodeType"
#define ZWN_TIMEOUT                 "Timeout"
+
#define ZWN_TIMEOUT                     "Timeout"
#define ZWN_MULTIPLE               "Multiple"
+
#define ZWN_MULTIPLE                   "Multiple"
#define ZWN_SIMULATE_INCOMING       "SimulateIncomingData"
+
#define ZWN_SIMULATE_INCOMING           "SimulateIncomingData"
#define ZWN_POLL_ENABLED           "PollingEnabled"
+
#define ZWN_POLL_ENABLED               "PollingEnabled"
#define ZWN_POLL_DELAY_INITIAL     "PollDelayInitial"
+
#define ZWN_POLL_DELAY_INITIAL         "PollDelayInitial"
#define ZWN_POLL_DELAY_DEADTIME     "PollDelayDeadTime"
+
#define ZWN_POLL_DELAY_DEADTIME         "PollDelayDeadTime"
#define ZWN_POLL_MINDELAY           "PollMinDelay"
+
#define ZWN_POLL_MINDELAY               "PollMinDelay"
#define ZWN_POLL_FREQUENCY         "PollFrequency"
+
#define ZWN_POLL_FREQUENCY             "PollFrequency"
#define ZWN_LAST_ERROR             "LastError"
+
#define ZWN_LAST_ERROR                 "LastError"
#define ZWN_DELAY_PROCESSING       "DelayProcessing"
+
#define ZWN_DELAY_PROCESSING           "DelayProcessing"
#define ZWN_FAILED_ONLY             "FailedOnly"
+
#define ZWN_FAILED_ONLY                 "FailedOnly"
#define ZWN_USE_45                 "Use45"
+
#define ZWN_USE_45                     "Use45"
#define ZWN_USE_MR                 "UseMR"
+
#define ZWN_USE_MR                     "UseMR"
#define ZWN_TO_3066                 "TO3066"            // indicates when we're going to work around the TO3066 issue
+
#define ZWN_TO_3066                     "TO3066"            // indicates when we're going to work around the TO3066 issue
#define ZWN_LIMIT_NEIGHBORS         "LimitNeighbors"    // indicates when we figure manual routing, only consider Z-Wave's neighbors as valid options</pre>
+
#define ZWN_LIMIT_NEIGHBORS             "LimitNeighbors"    // indicates when we figure manual routing, only consider Z-Wave's neighbors as valid options</pre>
  
  
Line 267: Line 240:
 
Basic functionality for all ZWave devices
 
Basic functionality for all ZWave devices
  
<pre>#define ZWDEVICE_FILE               "S_ZWaveDevice1.xml"
+
<pre>#define ZWDEVICE_FILE                   "S_ZWaveDevice1.xml"
#define ZWDEVICE_SID               "urn:micasaverde-com:serviceId:ZWaveDevice1"
+
#define ZWDEVICE_SID                   "urn:micasaverde-com:serviceId:ZWaveDevice1"
#define ZWDEVICE_STYPE             "urn:schemas-micasaverde-com:service:ZWaveDevice:1"</pre>
+
#define ZWDEVICE_STYPE                 "urn:schemas-micasaverde-com:service:ZWaveDevice:1"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define ZWD_POLL_SETTINGS           "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
+
<pre>#define ZWD_POLL_SETTINGS               "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define ZWD_POLL_COMMANDS           "PollCommands"      // A comma-separated list of command classes/commands to poll.  X means the device won't respond to any poll
+
#define ZWD_POLL_COMMANDS               "PollCommands"      // A comma-separated list of command classes/commands to poll.  X means the device won't respond to any poll
#define ZWD_MULTCH_ENDPOINT         "MultiChEndpoint"  // DEVICEDATA_Multi_Channel_End_Point_CONST
+
#define ZWD_MULTCH_ENDPOINT             "MultiChEndpoint"  // DEVICEDATA_Multi_Channel_End_Point_CONST
#define ZWD_MULTCH_CAPABIL         "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
+
#define ZWD_MULTCH_CAPABIL             "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
 
+
#define ZWD_NEIGHBORS              "Neighbors"        // DEVICEDATA_Neighbors_to_Call_CONST
+
#define ZWD_NEIGHBORS_INVERSE      "NeighborsInverse"  // Which neighbors see us
+
#define ZWD_CAPABILITIES            "Capabilities"      // DEVICEDATA_Capabilities_CONST
+
#define ZWD_SECURITY_FAILED        "SecurityFailed"    // Don't talk to this node with security even if it reports it can
+
#define ZWD_CONFIG                  "Configuration"    // DEVICEDATA_Configuration_CONST
+
#define ZWD_LAST_RESET              "LastReset"        // DEVICEDATA_Last_Reset_CONST
+
#define ZWD_SCENES_AS_EVENTS        "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
+
#define ZWD_SCENES_TIMESTAMPS      "ScenesTimestamp"  // DEVICEDATA_Scenes_CONST
+
#define ZWD_WAKEUP_INTERVAL        "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
+
#define ZWD_LAST_WAKEUP            "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
+
#define ZWD_LAST_ROUTE_UPD          "LastRouteUpdate"  // DEVICEDATA_Last_Route_Update_CONST
+
#define ZWD_HEALTH                  "Health"            // A rating from 0-5
+
#define ZWD_HEALTH_DATE            "HealthDate"        // The date the rating was assigned
+
#define ZWD_VARIABLES_GET          "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
+
#define ZWD_VARIABLES_SET          "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
+
#define ZWD_ASSOCIATION_GET        "AssociationGet"    // DEVICEDATA_Association_Get_CONST
+
#define ZWD_ASSOCIATION_SET        "AssociationSet"    // DEVICEDATA_Association_Set_CONST
+
#define ZWD_ASSOCIATION_NUM        "AssociationNum"
+
#define ZWD_NONCE_ACK              "NonceACK"
+
#define ZWD_MANUF_INFO              "ManufacturerInfo"  // DEVICEDATA_Model_CONST
+
#define ZWD_VERSION_INFO            "VersionInfo"      // DEVICEDATA_Configuration_CONST
+
#define ZWD_SETPOINT_INFO          "SetPointInfo"
+
#define ZWD_NODE_INFO              "NodeInfo"          // The Z-Wave node info frame
+
#define ZWD_INITIAL_NAME            "InitialName"      // The name that was initially set when the node was first added
+
#define ZWD_CONFIGURED_NAME        "ConfiguredName"    // The user-specified name when we configured the node.  We won't need to set the name unless this has changed
+
#define ZWD_CONFIGURED_VARIABLE    "ConfiguredVariable" // The user-specified VariablesSet when we configured the node.  We won't need to set the name unless this has changed
+
#define ZWD_CONFIGURED_ASSOC        "ConfiguredAssoc"  // The user-specified AssociationSet when we configured the node.  We won't need to set the name unless this has changed
+
#define ZWD_DOCUMENTATION          "Documentation"    // For the Z-Wave options page
+
#define ZWD_METER_TYPE              "MeterType"
+
#define ZWD_METER_SCALE            "MeterScale"
+
#define ZWD_ALARM_TYPE              "AlarmType"
+
#define ZWD_POLL_OK                "PollOk"
+
#define ZWD_POLL_TX_FAIL            "PollTxFail"
+
#define ZWD_POLL_NO_REPLY          "PollNoReply"
+
#define ZWD_MANUAL_ROUTE            "ManualRoute"      // A route specified by an end-user
+
#define ZWD_ALL_ROUTES_FAILED      "AllRoutesFailed"
+
#define ZWD_AUTO_ROUTE              "AutoRoute"        // A route chosen by profilings</pre>
+
  
 +
#define ZWD_NEIGHBORS                  "Neighbors"        // DEVICEDATA_Neighbors_to_Call_CONST
 +
#define ZWD_NEIGHBORS_INVERSE          "NeighborsInverse"  // Which neighbors see us
 +
#define ZWD_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
 +
#define ZWD_SECURITY_FAILED            "SecurityFailed"    // Don't talk to this node with security even if it reports it can
 +
#define ZWD_CONFIG                      "Configuration"    // DEVICEDATA_Configuration_CONST
 +
#define ZWD_LAST_RESET                  "LastReset"        // DEVICEDATA_Last_Reset_CONST
 +
#define ZWD_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
 +
#define ZWD_SCENES_TIMESTAMPS          "ScenesTimestamp"  // DEVICEDATA_Scenes_CONST
 +
#define ZWD_WAKEUP_INTERVAL            "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
 +
#define ZWD_LAST_WAKEUP                "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
 +
#define ZWD_LAST_ROUTE_UPD              "LastRouteUpdate"  // DEVICEDATA_Last_Route_Update_CONST
 +
#define ZWD_HEALTH                      "Health"            // A rating from 0-5
 +
#define ZWD_HEALTH_DATE                "HealthDate"        // The date the rating was assigned
 +
#define ZWD_VARIABLES_GET              "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
 +
#define ZWD_VARIABLES_SET              "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
 +
#define ZWD_ASSOCIATION_GET            "AssociationGet"    // DEVICEDATA_Association_Get_CONST
 +
#define ZWD_ASSOCIATION_SET            "AssociationSet"    // DEVICEDATA_Association_Set_CONST
 +
#define ZWD_ASSOCIATION_NUM            "AssociationNum"
 +
#define ZWD_NONCE_ACK                  "NonceACK"
 +
#define ZWD_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
 +
#define ZWD_VERSION_INFO                "VersionInfo"      // DEVICEDATA_Configuration_CONST
 +
#define ZWD_SETPOINT_INFO              "SetPointInfo"
 +
#define ZWD_NODE_INFO                  "NodeInfo"          // The Z-Wave node info frame
 +
#define ZWD_INITIAL_NAME                "InitialName"      // The name that was initially set when the node was first added
 +
#define ZWD_CONFIGURED_NAME            "ConfiguredName"    // The user-specified name when we configured the node.  We won't need to set the name unless this has changed
 +
#define ZWD_CONFIGURED_VARIABLE        "ConfiguredVariable" // The user-specified VariablesSet when we configured the node.  We won't need to set the name unless this has changed
 +
#define ZWD_CONFIGURED_ASSOC            "ConfiguredAssoc"  // The user-specified AssociationSet when we configured the node.  We won't need to set the name unless this has changed
 +
#define ZWD_DOCUMENTATION              "Documentation"    // For the Z-Wave options page
 +
#define ZWD_METER_TYPE                  "MeterType"
 +
#define ZWD_METER_SCALE                "MeterScale"
 +
#define ZWD_ALARM_TYPE                  "AlarmType"
 +
#define ZWD_POLL_OK                    "PollOk"
 +
#define ZWD_POLL_TX_FAIL                "PollTxFail"
 +
#define ZWD_POLL_NO_REPLY              "PollNoReply"
 +
#define ZWD_MANUAL_ROUTE                "ManualRoute"      // A route specified by an end-user
 +
#define ZWD_ALL_ROUTES_FAILED          "AllRoutesFailed"
 +
#define ZWD_AUTO_ROUTE                  "AutoRoute"        // A route chosen by profilings
 +
#define ZWD_IGNORE_DIRECT_SCENE        "IgnoreDirectScene" // See notes in IsSceneControllerEvent</pre>
  
 
== InsteonNetwork ==
 
== InsteonNetwork ==
 
Basic functionality for all Insteon devices
 
Basic functionality for all Insteon devices
  
<pre>#define INN_FILE                   "S_InsteonNetwork1.xml"
+
<pre>#define INN_FILE                       "S_InsteonNetwork1.xml"
#define INN_SID                     "urn:micasaverde-com:serviceId:InsteonNetwork1"
+
#define INN_SID                         "urn:micasaverde-com:serviceId:InsteonNetwork1"
#define INN_STYPE                   "urn:schemas-micasaverde-org:service:InsteonNetwork:1"</pre>
+
#define INN_STYPE                       "urn:schemas-micasaverde-org:service:InsteonNetwork:1"</pre>
  
 
=== Actions ===
 
=== Actions ===
<pre>#define INN_RESET_NETWORK           "ResetNetwork"
+
<pre>#define INN_RESET_NETWORK               "ResetNetwork"
#define INN_REMOVE_NODES           "RemoveNodes"
+
#define INN_REMOVE_NODES               "RemoveNodes"
#define INN_ADD_NODES               "AddNodes"
+
#define INN_ADD_NODES                   "AddNodes"
#define INN_STOP_ADDREM_NODES       "StopAddRemoveNodes"
+
#define INN_STOP_ADDREM_NODES           "StopAddRemoveNodes"
#define INN_SEND_DATA               "SendData"</pre>
+
#define INN_SEND_DATA                   "SendData"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define INN_COM_PORT               "ComPort"          // DEVICEDATA_COM_Port_on_PC_CONST
+
<pre>#define INN_COM_PORT                   "ComPort"          // DEVICEDATA_COM_Port_on_PC_CONST
#define INN_LOCK_COM_PORT           "LockComPort"   
+
#define INN_LOCK_COM_PORT               "LockComPort"   
#define INN_LAST_ERROR             "LastError"
+
#define INN_LAST_ERROR                 "LastError"
#define INN_LAST_UPDATE             "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
+
#define INN_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define INN_NET_STATUS_ID           "NetStatusID"   
+
#define INN_NET_STATUS_ID               "NetStatusID"   
#define INN_NET_STATUS_TEXT         "NetStatusText"   
+
#define INN_NET_STATUS_TEXT             "NetStatusText"   
#define INN_POLL_ENABLED           "PollingEnabled"
+
#define INN_POLL_ENABLED               "PollingEnabled"
#define INN_POLL_DELAY_INITIAL     "PollDelayInitial"
+
#define INN_POLL_DELAY_INITIAL         "PollDelayInitial"
#define INN_POLL_DELAY_DEADTIME     "PollDelayDeadTime"
+
#define INN_POLL_DELAY_DEADTIME         "PollDelayDeadTime"
#define INN_POLL_MINDELAY           "PollMinDelay"
+
#define INN_POLL_MINDELAY               "PollMinDelay"
#define INN_POLL_FREQUENCY         "PollFrequency"
+
#define INN_POLL_FREQUENCY             "PollFrequency"
#define INN_NODE_ID                 "NodeID"            // The dongle's id
+
#define INN_NODE_ID                     "NodeID"            // The dongle's id
#define INN_SL_X10_CODE             "sl_X10Code"</pre>
+
#define INN_SL_X10_CODE                 "sl_X10Code"</pre>
 +
 
  
 
== InsteonDevice ==
 
== InsteonDevice ==
 
Basic functionality for all Insteon devices
 
Basic functionality for all Insteon devices
  
<pre>#define INDEVICE_FILE           "S_InsteonDevice1.xml"
+
<pre>#define INDEVICE_FILE                   "S_InsteonDevice1.xml"
#define INDEVICE_SID           "urn:micasaverde-com:serviceId:InsteonDevice1"
+
#define INDEVICE_SID                   "urn:micasaverde-com:serviceId:InsteonDevice1"
#define INDEVICE_STYPE         "urn:schemas-micasaverde-com:service:InsteonDevice:1"</pre>
+
#define INDEVICE_STYPE                 "urn:schemas-micasaverde-com:service:InsteonDevice:1"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define IND_POLL_SETTINGS       "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
+
<pre>#define IND_POLL_SETTINGS               "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define IND_MULTCH_ENDPOINT     "MultiChEndpoint"  // DEVICEDATA_Multi_Channel_End_Point_CONST
+
#define IND_MULTCH_ENDPOINT             "MultiChEndpoint"  // DEVICEDATA_Multi_Channel_End_Point_CONST
#define IND_MULTCH_CAPABIL     "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
+
#define IND_MULTCH_CAPABIL             "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
 +
 
 +
#define IND_NEIGHBORS                  "Neighbors"        // DEVICEDATA_Neighbors_to_Call_CONST
 +
#define IND_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
 +
#define IND_CONFIG                      "Configuration"    // DEVICEDATA_Configuration_CONST
 +
#define IND_LAST_RESET                  "LastReset"        // DEVICEDATA_Last_Reset_CONST
 +
#define IND_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
 +
#define IND_WAKEUP_INTERVAL            "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
 +
#define IND_LAST_WAKEUP                "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
 +
#define IND_LAST_ROUTE_UPD              "LastRouteUpdate"  // DEVICEDATA_Last_Route_Update_CONST
 +
#define IND_VARIABLES_GET              "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
 +
#define IND_VARIABLES_SET              "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
 +
#define IND_ASSOCIATION_GET            "AssociationGet"    // DEVICEDATA_Association_Get_CONST
 +
#define IND_ASSOCIATION_SET            "AssociationSet"    // DEVICEDATA_Association_Set_CONST
 +
#define IND_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
 +
#define IND_VERSION_INFO                "VersionInfo"      // DEVICEDATA_Configuration_CONST
 +
#define IND_UPDATED_NAME                "UpdatedName"      // DEVICEDATA_Update_Name_CONST</pre>
  
#define IND_NEIGHBORS          "Neighbors"        // DEVICEDATA_Neighbors_to_Call_CONST
 
#define IND_CAPABILITIES        "Capabilities"      // DEVICEDATA_Capabilities_CONST
 
#define IND_CONFIG              "Configuration"    // DEVICEDATA_Configuration_CONST
 
#define IND_LAST_RESET          "LastReset"        // DEVICEDATA_Last_Reset_CONST
 
#define IND_SCENES_AS_EVENTS    "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
 
#define IND_WAKEUP_INTERVAL    "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
 
#define IND_LAST_WAKEUP        "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
 
#define IND_LAST_ROUTE_UPD      "LastRouteUpdate"  // DEVICEDATA_Last_Route_Update_CONST
 
#define IND_VARIABLES_GET      "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
 
#define IND_VARIABLES_SET      "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
 
#define IND_ASSOCIATION_GET    "AssociationGet"    // DEVICEDATA_Association_Get_CONST
 
#define IND_ASSOCIATION_SET    "AssociationSet"    // DEVICEDATA_Association_Set_CONST
 
#define IND_MANUF_INFO          "ManufacturerInfo"  // DEVICEDATA_Model_CONST
 
#define IND_VERSION_INFO        "VersionInfo"      // DEVICEDATA_Configuration_CONST
 
#define IND_UPDATED_NAME        "UpdatedName"      // DEVICEDATA_Update_Name_CONST</pre>
 
  
 
== USB UIRT ==
 
== USB UIRT ==
 
Basic functionality for USB UIRT
 
Basic functionality for USB UIRT
  
<pre>#define UIRT_FILE               "S_USBUIRT.xml"
+
<pre>#define UIRT_FILE                       "S_USBUIRT.xml"
#define UIRT_SID               "urn:micasaverde-com:serviceId:USBUIRT1"
+
#define UIRT_SID                       "urn:micasaverde-com:serviceId:USBUIRT1"
#define UIRT_TYPE               "urn:schemas-micasaverde-com:service:USBUIRT:1"</pre>
+
#define UIRT_TYPE                       "urn:schemas-micasaverde-com:service:USBUIRT:1"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define UIRT_COM_PORT           "ComPort"</pre>
+
<pre>#define UIRT_COM_PORT                   "ComPort"</pre>
 +
 
  
 
== Camera ==
 
== Camera ==
 
Basic functionality for all Cameras
 
Basic functionality for all Cameras
  
<pre>#define CAMDEVICE_FILE         "S_Camera1.xml"
+
<pre>#define CAMDEVICE_FILE                 "S_Camera1.xml"
#define CAMDEVICE_SID           "urn:micasaverde-com:serviceId:Camera1"
+
#define CAMDEVICE_SID                   "urn:micasaverde-com:serviceId:Camera1"
#define CAMDEVICE_STYPE         "urn:schemas-micasaverde-com:service:Camera:1"</pre>
+
#define CAMDEVICE_STYPE                 "urn:schemas-micasaverde-com:service:Camera:1"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define CAM_USERNAME           "Username"          // DEVICEDATA_AuthUser_CONST
+
<pre>#define CAM_USERNAME                   "Username"          // DEVICEDATA_AuthUser_CONST
#define CAM_PASSWORD           "Password"          // DEVICEDATA_AuthPassword_CONST
+
#define CAM_PASSWORD                   "Password"          // DEVICEDATA_AuthPassword_CONST
 +
 
 +
#define CAM_RELATED_SENSORS            "RelatedSensors"    // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
 +
#define CAM_SENSOR_ARCHIVE_SEC          "SensorArchiveSeconds" // Integer: And after the sensor(s) are tripped archive the video for  seconds.
 +
#define CAM_RELATED_LIGHTS              "RelatedLights"    // Comma separated list: Which lights should be turned on when viewing this camera:
 +
#define CAM_LIGHT_OPTIONS              "LightOptions"      // V=When I view the camera from the web or phone.
 +
                                                            // S=When the sensor(s) above are tripped and they are armed
 +
                                                            // B=When the sensors above are tripped and they are *not* armed
 +
                                                            // A=When you take an automatic picture for the archive
 +
                                                            // So: VSBA means do them all
  
#define CAM_RELATED_SENSORS    "RelatedSensors"   // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
+
#define CAM_AUTO_ARCH_SEC              "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds
#define CAM_SENSOR_ARCHIVE_SEC  "SensorArchiveSeconds" // Integer: And after the sensor(s) are tripped archive the video for  seconds.
+
#define CAM_AUTO_PRES_DAYS              "AutoArchivePreserveDays" // and keep the pictures x days
#define CAM_RELATED_LIGHTS      "RelatedLights"     // Comma separated list: Which lights should be turned on when viewing this camera:
+
#define CAM_URL                        "URL"               // DEVICEDATA_Path_CONST
#define CAM_LIGHT_OPTIONS      "LightOptions"     // V=When I view the camera from the web or phone.
+
#define CAM_DIRECT_URL                  "DirectStreamingURL"
                                                    // S=When the sensor(s) above are tripped and they are armed
+
#define CAM_TIMEOUT                    "Timeout"</pre>
                                                    // B=When the sensors above are tripped and they are *not* armed
+
                                                    // A=When you take an automatic picture for the archive
+
                                                    // So: VSBA means do them all
+
  
#define CAM_AUTO_ARCH_SEC      "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds
 
#define CAM_AUTO_PRES_DAYS      "AutoArchivePreserveDays" // and keep the pictures x days
 
#define CAM_URL                "URL"              // DEVICEDATA_Path_CONST
 
#define CAM_DIRECT_URL          "DirectStreamingURL"
 
#define CAM_TIMEOUT            "Timeout"</pre>
 
  
 
== PanTiltZoom ==
 
== PanTiltZoom ==
 
For Cameras
 
For Cameras
  
<pre>#define PTZ_FILE               "S_PanTiltZoom1.xml"
+
<pre>#define PTZ_FILE                       "S_PanTiltZoom1.xml"
#define PTZ_SID                 "urn:micasaverde-com:serviceId:PanTiltZoom1"
+
#define PTZ_SID                         "urn:micasaverde-com:serviceId:PanTiltZoom1"
#define PTZ_STYPE               "urn:schemas-micasaverde-com:service:PanTiltZoom:1"</pre>
+
#define PTZ_STYPE                       "urn:schemas-micasaverde-com:service:PanTiltZoom:1"</pre>
  
 
=== Actions ===
 
=== Actions ===
<pre>#define PTZ_LEFT               "MoveLeft"
+
<pre>#define PTZ_LEFT                       "MoveLeft"
#define PTZ_RIGHT               "MoveRight"
+
#define PTZ_RIGHT                       "MoveRight"
#define PTZ_UP                 "MoveUp"
+
#define PTZ_UP                         "MoveUp"
#define PTZ_DOWN               "MoveDown"
+
#define PTZ_DOWN                       "MoveDown"
#define PTZ_IN                 "ZoomIn"
+
#define PTZ_IN                         "ZoomIn"
#define PTZ_OUT                 "ZoomOut"</pre>
+
#define PTZ_OUT                         "ZoomOut"</pre>
 +
 
  
 
== SwitchPower1 ==
 
== SwitchPower1 ==
<pre>#define SWP_SID                 "urn:upnp-org:serviceId:SwitchPower1"</pre>
+
<pre>#define SWP_SID                         "urn:upnp-org:serviceId:SwitchPower1"</pre>
  
 
=== Actions ===
 
=== Actions ===
<pre>#define SWP_SET_TARGET         "SetTarget"</pre>
+
<pre>#define SWP_SET_TARGET                 "SetTarget"</pre>
  
 
=== Variables ===
 
=== Variables ===
<pre>#define SWP_STATUS             "Status"  
+
<pre>#define SWP_STATUS                     "Status"  
#define SWP_TARGET             "Target"</pre>
+
#define SWP_TARGET                     "Target"</pre>
 +
 
  
 
== S_WindowCovering1 ==
 
== S_WindowCovering1 ==
#define WC_SID                 "urn:upnp-org:serviceId:WindowCovering1"
+
<pre>#define WC_SID                         "urn:upnp-org:serviceId:WindowCovering1"</pre>
  
 
=== Actions ===
 
=== Actions ===
#define WC_UP                   "Up"  
+
<pre>#define WC_UP                           "Up"
#define WC_DOWN                 "Down"  
+
#define WC_DOWN                         "Down"
#define WC_STOP                 "Stop"  
+
#define WC_STOP                         "Stop"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define WC_STATUS               "Status"  
+
<pre>#define WC_STATUS                       "Status"
#define WC_TARGET               "Target"  
+
#define WC_TARGET                       "Target"</pre>
 +
 
  
 
== Dimming1 ==
 
== Dimming1 ==
#define SWD_SID                 "urn:upnp-org:serviceId:Dimming1"
+
<pre>#define SWD_SID                         "urn:upnp-org:serviceId:Dimming1"</pre>
  
 
=== Actions ===
 
=== Actions ===
#define SWD_SET_LOAD_LEVEL     "SetLoadLevelTarget"  
+
<pre>#define SWD_SET_LOAD_LEVEL             "SetLoadLevelTarget"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define SWD_LOAD_LEVEL_STATUS   "LoadLevelStatus"  
+
<pre>#define SWD_LOAD_LEVEL_STATUS           "LoadLevelStatus"
#define SWD_LOAD_LEVEL_TARGET   "LoadLevelTarget"
+
#define SWD_LOAD_LEVEL_TARGET           "LoadLevelTarget"</pre>
 +
 
  
 
== DoorLock1 ==
 
== DoorLock1 ==
#define DL_SID                 "urn:micasaverde-com:serviceId:DoorLock1"
+
<pre>#define DL_SID                         "urn:micasaverde-com:serviceId:DoorLock1"</pre>
  
 
=== Actions ===
 
=== Actions ===
#define DL_SET_TARGET           "SetTarget"
+
<pre>#define DL_SET_TARGET                   "SetTarget"
#define DL_SET_PIN             "SetPin"
+
#define DL_SET_PIN                     "SetPin"
#define DL_CLEAR_PIN           "ClearPin"
+
#define DL_CLEAR_PIN                   "ClearPin"
#define DL_SET_PIN_DATE         "SetPinValidityDate"
+
#define DL_SET_PIN_DATE                 "SetPinValidityDate"
#define DL_SET_PIN_WEEK         "SetPinValidityWeekly"
+
#define DL_SET_PIN_WEEK                 "SetPinValidityWeekly"
#define DL_CLEAR_PIN_VALID     "ClearPinValidity"
+
#define DL_CLEAR_PIN_VALID             "ClearPinValidity"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define DL_STATUS               "Status"  
+
<pre>#define DL_STATUS                       "Status"
#define DL_TARGET               "Target"  
+
#define DL_TARGET                       "Target"
#define DL_MIN_PIN_SIZE         "MinPinSize"  
+
#define DL_MIN_PIN_SIZE                 "MinPinSize"
#define DL_MAX_PIN_SIZE         "MaxPinSize"  
+
#define DL_MAX_PIN_SIZE                 "MaxPinSize"
#define DL_KEEP_PIN_CODES       "KeepPinCodes"  
+
#define DL_KEEP_PIN_CODES               "KeepPinCodes"
#define DL_SL_USER_CODE         "sl_UserCode"
+
#define DL_SL_USER_CODE                 "sl_UserCode"
#define DL_SL_PIN_FAILED       "sl_PinFailed"
+
#define DL_SL_PIN_FAILED               "sl_PinFailed"
#define DL_SL_LOCK_BUTTON       "sl_LockButton"
+
#define DL_SL_LOCK_BUTTON               "sl_LockButton"
#define DL_SL_LOCK_FAILURE     "sl_LockFailure"
+
#define DL_SL_LOCK_FAILURE             "sl_LockFailure"
#define DL_SL_UNAUTH_USER       "sl_UnauthUser"
+
#define DL_SL_UNAUTH_USER               "sl_UnauthUser"
#define DL_SL_LOW_BATTERY       "sl_LowBattery"
+
#define DL_SL_LOW_BATTERY               "sl_LowBattery"
#define DL_SL_VERY_LOW_BATTERY "sl_VeryLowBattery"
+
#define DL_SL_VERY_LOW_BATTERY         "sl_VeryLowBattery"
#define DL_SL_CODE_CHANGED     "sl_CodeChanged"
+
#define DL_SL_CODE_CHANGED             "sl_CodeChanged"
 +
 
 +
#define DL_PIN_CODES                    "PinCodes"      // DEVICEDATA_PIN_Codes_CONST
 +
#define DL_NUM_SCHEDULES                "NumSchedules"  // DEVICEDATA_PIN_Codes_CONST</pre>
  
#define DL_PIN_CODES            "PinCodes"      // DEVICEDATA_PIN_Codes_CONST
 
#define DL_NUM_SCHEDULES        "NumSchedules"  // DEVICEDATA_PIN_Codes_CONST
 
  
 
== HVAC_UserOperatingMode1 ==
 
== HVAC_UserOperatingMode1 ==
#define HVACO_SID               "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"
+
<pre>#define HVACO_SID                       "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"</pre>
  
 
=== Actions ===
 
=== Actions ===
#define HVACO_SET_MODE         "SetModeTarget"
+
<pre>#define HVACO_SET_MODE                 "SetModeTarget"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define HVACO_TARGET           "ModeTarget"
+
<pre>#define HVACO_TARGET                   "ModeTarget"
#define HVACO_STATUS           "ModeStatus"
+
#define HVACO_STATUS                   "ModeStatus"
 +
#define HVACO_SUPPORTED                "SupportedType"</pre>
  
 
== HVAC_OperatingState1 ==
 
== HVAC_OperatingState1 ==
#define HVACS_SID               "urn:micasaverde-com:serviceId:HVAC_OperatingState1"
+
<pre>#define HVACS_SID                       "urn:micasaverde-com:serviceId:HVAC_OperatingState1"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define HVACS_STATE             "ModeState"
+
<pre>#define HVACS_STATE                     "ModeState"
#define HVACS_STATE_ENERGY     "ModeStateForEnergy"
+
#define HVACS_STATE_ENERGY             "ModeStateForEnergy"</pre>
 +
 
  
 
== HVAC_FanOperatingMode1 ==
 
== HVAC_FanOperatingMode1 ==
#define HVACF_SID               "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"
+
<pre>#define HVACF_SID                       "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"</pre>
  
 
=== Actions ===
 
=== Actions ===
#define HVACF_SET_MODE         "SetMode"
+
<pre>#define HVACF_SET_MODE                 "SetMode"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define HVACF_STATUS           "Mode"
+
<pre>#define HVACF_STATUS                   "Mode"</pre>
  
  
 
== TemperatureSetpoint1_Heat/Cool ==
 
== TemperatureSetpoint1_Heat/Cool ==
#define HVACHEAT_SID           "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
+
<pre>#define HVACHEAT_SID                   "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
#define HVACCOOL_SID           "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"
+
#define HVACCOOL_SID                   "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"</pre>
  
 
=== Actions ===
 
=== Actions ===
#define HVACHC_SETPOINT         "SetCurrentSetpoint"
+
<pre>#define HVACHC_SETPOINT                 "SetCurrentSetpoint"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define HVACHC_CURRENTSP       "CurrentSetpoint"
+
<pre>#define HVACHC_CURRENTSP               "CurrentSetpoint"
#define HVACHC_SETPOINT_TARGET "SetpointTarget"
+
#define HVACHC_SETPOINT_TARGET         "SetpointTarget"</pre>
 +
 
  
 
== TemperatureSensor1 ==
 
== TemperatureSensor1 ==
#define TEMP_SID               "urn:upnp-org:serviceId:TemperatureSensor1"
+
<pre>#define TEMP_SID                       "urn:upnp-org:serviceId:TemperatureSensor1"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define TEMP_CURRENT           "CurrentTemperature"
+
<pre>#define TEMP_CURRENT                   "CurrentTemperature"</pre>
 +
 
  
 
== LightSensor1 ==
 
== LightSensor1 ==
#define LIGHT_SID               "urn:micasaverde-com:serviceId:LightSensor1"
+
<pre>#define LIGHT_SID                       "urn:micasaverde-com:serviceId:LightSensor1"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define LIGHT_CURRENT           "CurrentLevel"
+
<pre>#define LIGHT_CURRENT                   "CurrentLevel"</pre>
 +
 
  
 
== HumiditySensor1 ==
 
== HumiditySensor1 ==
#define HUM_SID                 "urn:micasaverde-com:serviceId:HumiditySensor1"
+
<pre>#define HUM_SID                         "urn:micasaverde-com:serviceId:HumiditySensor1"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define HUM_CURRENT             "CurrentLevel"
+
<pre>#define HUM_CURRENT                     "CurrentLevel"</pre>
 +
 
  
 
== SecuritySensor1 ==
 
== SecuritySensor1 ==
#define SES_SID                 "urn:micasaverde-com:serviceId:SecuritySensor1"
+
<pre>#define SES_SID                         "urn:micasaverde-com:serviceId:SecuritySensor1"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define SES_ARMED               "Armed"
+
<pre>#define SES_ARMED                       "Armed"
#define SES_TRIPPED             "Tripped"
+
#define SES_TRIPPED                     "Tripped"
#define SES_LAST_TRIP           "LastTrip"
+
#define SES_LAST_TRIP                   "LastTrip"</pre>
  
 
=== Action ===
 
=== Action ===
#define SES_SET_ARMED           "SetArmed"
+
<pre>#define SES_SET_ARMED                   "SetArmed"</pre>
 +
 
  
 
== EnergyMetering1 ==
 
== EnergyMetering1 ==
#define ENE_SID                 "urn:micasaverde-com:serviceId:EnergyMetering1"
+
<pre>#define ENE_SID                         "urn:micasaverde-com:serviceId:EnergyMetering1"</pre>
  
 
=== Actions ===
 
=== Actions ===
#define ENE_RESETKWH           "ResetKWH"      // Reset Kwh
+
<pre>#define ENE_RESETKWH                   "ResetKWH"      // Reset Kwh</pre>
  
 
=== Variables ===
 
=== Variables ===
#define ENE_KWH                 "KWH"
+
<pre>#define ENE_KWH                         "KWH"
#define ENE_KWH_READING         "KWHReading"    // The time it was last read
+
#define ENE_KWH_READING                 "KWHReading"    // The time it was last read
#define ENE_KVARH               "kVARh"
+
#define ENE_KVARH                       "kVARh"
#define ENE_KVAR               "kVAR"
+
#define ENE_KVAR                       "kVAR"
#define ENE_WATTS               "Watts"
+
#define ENE_WATTS                       "Watts"
#define ENE_PULSE               "Pulse"
+
#define ENE_PULSE                       "Pulse"
#define ENE_ACTUAL             "ActualUsage"
+
#define ENE_ACTUAL                     "ActualUsage"
#define ENE_USER_SUPPLIED       "UserSuppliedWattage"
+
#define ENE_USER_SUPPLIED               "UserSuppliedWattage"
#define ENE_WHOLE_HOUSE         "WholeHouse"
+
#define ENE_WHOLE_HOUSE                 "WholeHouse"
#define ENE_LOG                 "Log"
+
#define ENE_LOG                         "Log"</pre>
 +
 
  
 
== IrTransmitter1 ==
 
== IrTransmitter1 ==
#define IRT_SID                 "urn:micasaverde-com:serviceId:IrTransmitter1"
+
<pre>#define IRT_SID                         "urn:micasaverde-com:serviceId:IrTransmitter1"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define IRT_SENDPRONTO         "SendProntoCode"
+
<pre>#define IRT_SENDPRONTO                 "SendProntoCode"</pre>
  
  
 
== SerialPort1 ==
 
== SerialPort1 ==
#define SPT_SID                 "urn:micasaverde-org:serviceId:SerialPort1"
+
<pre>#define SPT_SID                         "urn:micasaverde-org:serviceId:SerialPort1"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define SPT_BAUD               "baud"
+
<pre>#define SPT_BAUD                       "baud"
#define SPT_VENDOR             "vendor"
+
#define SPT_VENDOR                     "vendor"
#define SPT_PRODUCT             "product"
+
#define SPT_PRODUCT                     "product"
#define SPT_PATH               "path"
+
#define SPT_PATH                       "path"</pre>
 +
 
  
 
== SceneController1 ==
 
== SceneController1 ==
#define SCR_SID                 "urn:micasaverde-com:serviceId:SceneController1"
+
<pre>#define SCR_SID                         "urn:micasaverde-com:serviceId:SceneController1"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define SCR_SL_SCENE_ACTIVATED "sl_SceneActivated"
+
<pre>#define SCR_SL_SCENE_ACTIVATED         "sl_SceneActivated"
#define SCR_SL_SCENE_DEACTIVATED "sl_SceneDeactivated"
+
#define SCR_SL_SCENE_DEACTIVATED       "sl_SceneDeactivated"
#define SCR_SCENES             "Scenes"
+
#define SCR_SCENES                     "Scenes"
#define SCR_LAST_SCENE_ID       "LastSceneID"
+
#define SCR_LAST_SCENE_ID               "LastSceneID"
#define SCR_LAST_SCENE_TIME     "LastSceneTime"
+
#define SCR_LAST_SCENE_TIME             "LastSceneTime"
#define SCR_MANAGE_LEDS         "ManageLeds"
+
#define SCR_MANAGE_LEDS                 "ManageLeds"
#define SCR_NUM_BUTTONS         "NumButtons"
+
#define SCR_NUM_BUTTONS                 "NumButtons"
#define SCR_FIRES_OFF_EVENTS   "FiresOffEvents"
+
#define SCR_FIRES_OFF_EVENTS           "FiresOffEvents"
#define SCR_SCENE_SHORTCUTS     "SceneShortcuts"
+
#define SCR_SCENE_SHORTCUTS             "SceneShortcuts"
#define SCR_ACTIVATION_METHOD   "ActivationMethod"  // 1=BASIC_SET only (ignore scene_activate) 2=SCENE_ACTIVATE only (ignore basic set).  0=anything goes
+
#define SCR_ACTIVATION_METHOD           "ActivationMethod"  // 1=BASIC_SET only (ignore scene_activate) 2=SCENE_ACTIVATE only (ignore basic set).  0=anything goes</pre>
 +
 
  
 
== SceneControllerLED1 ==
 
== SceneControllerLED1 ==
#define SCL_SID                 "urn:micasaverde-com:serviceId:SceneControllerLED1"
+
<pre>#define SCL_SID                         "urn:micasaverde-com:serviceId:SceneControllerLED1"</pre>
  
 
=== Actions ===
 
=== Actions ===
#define SCL_SET_LIGHT           "SetLight"
+
<pre>#define SCL_SET_LIGHT                   "SetLight"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define SCL_LIGHT_SETTINGS     "LightSettings"
+
<pre>#define SCL_LIGHT_SETTINGS             "LightSettings"</pre>
 +
 
  
 
== GenericIO ==
 
== GenericIO ==
#define GIO_SID                 "urn:micasaverde-com:serviceId:GenericIO"
+
<pre>#define GIO_SID                         "urn:micasaverde-com:serviceId:GenericIO"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define GIO_IS_INPUT           "IsInput"          // DEVICEDATA_InputOrOutput_CONST, 1 if it's input
+
<pre>#define GIO_IS_INPUT                   "IsInput"          // DEVICEDATA_InputOrOutput_CONST, 1 if it's input
#define GIO_DEFAULT_STATE       "DefaultState"      // DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed
+
#define GIO_DEFAULT_STATE               "DefaultState"      // DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed</pre>
 +
 
  
 
== IR ==
 
== IR ==
#define IR_SID                 "urn:micasaverde-com:serviceId:IrDevice1"
+
<pre>#define IR_SID                         "urn:micasaverde-com:serviceId:IrDevice1"</pre>
  
#define IR_SEND_CODE           "SendCode"
+
=== Actions ===
 +
<pre>#define IR_SEND_CODE                   "SendCode"</pre>
  
 
=== Variables ===
 
=== Variables ===
#define IR_CODESETS             "Codesets"      
+
<pre>#define IR_CODESETS                     "Codesets"
#define IR_CODESET             "Codeset"      
+
#define IR_CODESET                     "Codeset"
#define IR_REMOTE               "Remote"      
+
#define IR_REMOTE                       "Remote"
#define IR_MFRID               "MfrId"      
+
#define IR_MFRID                       "MfrId"</pre>
 
+
[[Category:Development]]
+

Latest revision as of 10:37, 5 January 2016

The following is the contents of the file Constants.h which defines the strings used for file device types, services, actions, variables, etc.

/*
Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation 
All rights reserved. This software may not be used or distributed without express consent.
*/


Contents

[edit] Device Types

#define DEVICETYPE_HOME_AUTO_GATEWAY    "urn:schemas-micasaverde-com:device:HomeAutomationGateway:1"
#define DEVICETYPE_BINARY_LIGHT         "urn:schemas-upnp-org:device:BinaryLight:1"
#define DEVICETYPE_DIMMABLE_LIGHT       "urn:schemas-upnp-org:device:DimmableLight:1"
#define DEVICETYPE_THERMOSTAT           "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
#define DEVICETYPE_HEATER               "urn:schemas-upnp-org:device:Heater:1"
#define DEVICETYPE_HUMIDITY_SENSOR      "urn:schemas-micasaverde-com:device:HumiditySensor:1"
#define DEVICETYPE_MULTI_IO             "urn:schemas-micasaverde-com:device:MultiIO:1"
#define DEVICETYPE_DOOR_LOCK            "urn:schemas-micasaverde-com:device:DoorLock:1"
#define DEVICETYPE_DOOR_SENSOR          "urn:schemas-micasaverde-com:device:DoorSensor:1"
#define DEVICETYPE_ZWAVE_NETWORK        "urn:schemas-micasaverde-com:device:ZWaveNetwork:1"
#define DEVICETYPE_ZIGBEE_NETWORK       "urn:schemas-micasaverde-com:device:ZigbeeNetwork:1"
#define DEVICETYPE_INSTEON_NETWORK      "urn:schemas-micasaverde-com:device:InsteonNetwork:1"
#define DEVICETYPE_USB_UIRT             "urn:schemas-micasaverde-com:device:USBUIRT:1"
#define DEVICETYPE_TEMPERATURE_SENSOR   "urn:schemas-micasaverde-com:device:TemperatureSensor:1"
#define DEVICETYPE_POWER_METER          "urn:schemas-micasaverde-com:device:PowerMeter:1"
#define DEVICETYPE_MOTION_SENSOR        "urn:schemas-micasaverde-com:device:MotionSensor:1"
#define DEVICETYPE_SMOKE_SENSOR         "urn:schemas-micasaverde-com:device:SmokeSensor:1"
#define DEVICETYPE_GENERIC_SENSOR       "urn:schemas-micasaverde-com:device:GenericSensor:1"
#define DEVICETYPE_LIGHT_SENSOR         "urn:schemas-micasaverde-com:device:LightSensor:1"
#define DEVICETYPE_IR_TRANSMITTER       "urn:schemas-micasaverde-com:device:IrTransmitter:1"
#define DEVICETYPE_WINDOW_COVERING      "urn:schemas-micasaverde-com:device:WindowCovering:1"
#define DEVICETYPE_GENERIC_IO           "urn:schemas-micasaverde-com:device:GenericIO:1"
#define DEVICETYPE_REMOTE_CONTROL       "urn:schemas-micasaverde-com:device:RemoteControl:1"
#define DEVICETYPE_COMBO_DEVICE         "urn:schemas-micasaverde-com:device:ComboDevice:1"
#define DEVICETYPE_CAMERA               "urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
#define DEVICETYPE_CAMERA2              "urn:schemas-upnp-org:device:DigitalSecurityCamera:2"
#define DEVICETYPE_SERIALPORT           "urn:micasaverde-org:device:SerialPort:1"
#define DEVICETYPE_SERIALPORTROOT       "urn:micasaverde-org:device:SerialPortRoot:1"
#define DEVICETYPE_SCENE_CONTROLLER     "urn:schemas-micasaverde-com:device:SceneController:1"
#define DEVICETYPE_SCENE_CONTR_LED      "urn:schemas-micasaverde-com:device:SceneControllerLED:1"
#define DEVICETYPE_ENERGY_CALCULATOR    "urn:schemas-micasaverde-com:device:EnergyCalculator:1"
#define DEVICETYPE_TEMP_LEAK_SENSOR     "urn:schemas-micasaverde-com:device:TempLeakSensor:1"
#define DEVICETYPE_RELAY                "urn:schemas-micasaverde-com:device:Relay:1"
#define DEVICETYPE_ALARMPANEL           "urn:schemas-micasaverde-com:device:AlarmPanel:1"
#define DEVICETYPE_ALARMPARTITION1      "urn:schemas-micasaverde-com:device:AlarmPartition:1"
#define DEVICETYPE_ALARMPARTITION2      "urn:schemas-micasaverde-com:device:AlarmPartition:2"
#define DEVICETYPE_SIREN                "urn:schemas-micasaverde-com:device:Siren:1"
#define DEVICETYPE_FLOOD_SENSOR         "urn:schemas-micasaverde-com:device:FloodSensor:1"

#define DEVICETYPE_SCENE                "urn:schemas-micasaverde-com:device:Scene:1"

[edit] IR Device Types

#define DEVICETYPE_IR                   "urn:schemas-micasaverde-com:device:IrDevice:1"
#define DEVICETYPE_TV                   "urn:schemas-micasaverde-com:device:tv:1"
#define DEVICETYPE_CABLE                "urn:schemas-micasaverde-com:device:cable:1"
#define DEVICETYPE_SATELLITE            "urn:schemas-micasaverde-com:device:satellite:1"
#define DEVICETYPE_VIDEO_ACCESSORY      "urn:schemas-micasaverde-com:device:videoaccessory:1"
#define DEVICETYPE_VCR_DVR              "urn:schemas-micasaverde-com:device:vcrdvd:1"
#define DEVICETYPE_DVD_BLURAY           "urn:schemas-micasaverde-com:device:dvdbluray:1"
#define DEVICETYPE_RECEIVER             "urn:schemas-micasaverde-com:device:receiver:1"
#define DEVICETYPE_AMP                  "urn:schemas-micasaverde-com:device:amp:1"
#define DEVICETYPE_CD                   "urn:schemas-micasaverde-com:device:cd:1"
#define DEVICETYPE_MISC_HOME_CONTROL    "urn:schemas-micasaverde-com:device:mischomecontrol:1"
#define DEVICETYPE_AV_MISC              "urn:schemas-micasaverde-com:device:avmisc:1"
#define DEVICETYPE_VIRTUAL_DEVICE       "urn:schemas-micasaverde-com:device:VirtualDevice:1"

[edit] Device Files

#define DEVICEFILE_BINARY_LIGHT         "D_BinaryLight1.xml"
#define DEVICEFILE_DIMMABLE_LIGHT       "D_DimmableLight1.xml"
#define DEVICEFILE_THERMOSTAT           "D_HVAC_ZoneThermostat1.xml"
#define DEVICEFILE_HEATER               "D_Heater1.xml"
#define DEVICEFILE_HUMIDITY_SENSOR      "D_HumiditySensor1.xml"
#define DEVICEFILE_MULTI_IO             "D_GC100.xml"
#define DEVICEFILE_DOOR_LOCK            "D_DoorLock1.xml"
#define DEVICEFILE_DOOR_SENSOR          "D_DoorSensor1.xml"
#define DEVICEFILE_ZWAVE_NETWORK        "D_ZWaveNetwork.xml"
#define DEVICEFILE_INSTEON_NETWORK      "D_InsteonNetwork.xml"
#define DEVICEFILE_USB_UIRT             "D_USB_UIRT.xml"
#define DEVICEFILE_TEMPERATURE_SENSOR   "D_TemperatureSensor1.xml"
#define DEVICEFILE_POWER_METER          "D_PowerMeter1.xml"
#define DEVICEFILE_MOTION_SENSOR        "D_MotionSensor1.xml"
#define DEVICEFILE_SMOKE_SENSOR         "D_SmokeSensor1.xml"
#define DEVICEFILE_GENERIC_SENSOR       "D_GenericSensor1.xml"
#define DEVICEFILE_LIGHT_SENSOR         "D_LightSensor1.xml"
#define DEVICEFILE_IR_TRANSMITTER       "D_IrTransmitter1.xml"
#define DEVICEFILE_IR_DEVICE            "D_IrDevice1.xml"
#define DEVICEFILE_WINDOW_COVERING      "D_WindowCovering1.xml"
#define DEVICEFILE_SERIAL_PORT_ROOT     "D_SerialPortRoot1.xml"
#define DEVICEFILE_GENERIC_IO           "D_GenericIO1.xml"
#define DEVICEFILE_REMOTE_CONTROL       "D_RemoteControl1.xml"
#define DEVICEFILE_COMBO_DEVICE         "D_ComboDevice1.xml"
#define DEVICEFILE_CAMERA               "D_DigitalSecurityCamera1.xml"
#define DEVICEFILE_SCENE_CONTROLLER     "D_SceneController1.xml"
#define DEVICEFILE_SCENE_CONTR_LED      "D_SceneControllerLED1.xml"
#define DEVICEFILE_ENERGY_CALCULATOR    "D_EnergyCalculator1.xml"
#define DEVICEFILE_AV_MISC              "D_AvMisc1.xml"
#define DEVICEFILE_TEMP_LEAK_SENSOR     "D_TempLeakSensor1.xml"
#define DEVICEFILE_RELAY                "D_Relay1.xml"
#define DEVICEFILE_SIREN                "D_Siren1.xml"
#define DEVICEFILE_FLOOD_SENSOR         "D_FloodSensor1.xml"

#define DEVICEFILE_AV_SCENE             "D_Scene1.xml"

[edit] Device Categories

See Luup Device Categories.

[edit] HaGateway

Basic functionality for the gateway itself

#define HAGEVICE_FILE                   "S_HomeAutomationGateway1.xml"
#define HAGEVICE_SID                    "urn:micasaverde-com:serviceId:HomeAutomationGateway1"
#define HAGEVICE_STYPE                  "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"

[edit] Variables

#define HAG_ACTIVE_SCENES               "ActiveScenes"
#define HAG_DATAVERSION_USERDATA        "DataVersionUserData" // The current data version for user_data
#define HAG_DATAVERSION_STATUS          "DataVersionStatus" // The current data version for lu_status

[edit] Actions

#define HAG_GET_USER_DATA		"GetUserData"  
#define HAG_MODIFY_USER_DATA		"ModifyUserData" 
#define HAG_MODIFY_GET_VARIABLE		"GetVariable" 
#define HAG_MODIFY_SET_VARIABLE		"SetVariable" 
#define HAG_MODIFY_GET_STATUS		"GetStatus" 
#define HAG_MODIFY_GET_ACTIONS		"GetActions" 
#define HAG_MODIFY_CREATE_DEVICE	"CreateDevice" 
#define HAG_MODIFY_DELETE_DEVICE	"DeleteDevice" 
#define HAG_MODIFY_CREATE_PLUGIN	"CreatePlugin" 
#define HAG_MODIFY_DELETE_PLUGIN	"DeletePlugin" 
#define HAG_MODIFY_CREATE_PLUGIN_DEVICE	"CreatePluginDevice" 
#define HAG_IMPORT_UPNP_DEVICE		"ImportUpnpDevice" 
#define HAG_PROCESS_CHILD		"ProcessChildDevices" 
#define HAG_RELOAD			"Reload" 
#define HAG_RUN_SCENE			"RunScene"
#define HAG_SCENE_OFF			"SceneOff"
#define HAG_RUN_LUA			"RunLua"
#define HAG_LOG_IP_REQUEST		"LogIpRequest"

[edit] HaDevice

Basic functionality for all home automation devices

#define HADEVICE_FILE                   "S_HaDevice1.xml"
#define HADEVICE_SID                    "urn:micasaverde-com:serviceId:HaDevice1"
#define HADEVICE_STYPE                  "urn:schemas-micasaverde-com:service:HaDevice:1"

[edit] Variables

#define HAD_ENERGY_LOG                  "EnergyLog"         // DEVICEDATA_Energy_Log_CONST
#define HAD_IOPORT_DEVICE               "IODevice"          // The device number to connect to for IO (this is on the master device)
#define HAD_IOPORT_DEVICE_XREF          "IODeviceXRef"      // On the port, this is the device number that connects to it
#define HAD_IOPORT_MAX_TIME             "MaxTime"           // The maximum time to leave the socket open before closing and re-opening
#define HAD_IOPORT_PORT                 "IOPort"            // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
#define HAD_IOPORT_PATH                 "IOPortPath"        // Read-only, created at each boot, has the current path to the port
#define HAD_IGNORE_ROOM                 "IgnoreRoom"        // DEVICEDATA_Room_Not_Required_CONST
#define HAD_COMM_FAILURE                "CommFailure"
#define HAD_POLLING_ENABLED             "PollingEnabled"
#define HAD_POLL_MIN_DELAY              "PollMinDelay"
#define HAD_CONFIGURED                  "Configured"
#define HAD_JOBID                       "JobID"
#define HAD_REVERSE                     "ReverseOnOff"      // DEVICEDATA_Reverse_CONST
#define HAD_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define HAD_LAST_ACTIVITY               "LastActivity"      // Used by the OPower plugin
#define HAD_AUTO_CONFIGURE              "AutoConfigure"     // DEVICEDATA_Auto_Configure_CONST
#define HAD_LAST_TIME_CHECK             "LastTimeCheck"     // Only for devices that are capable of implementing time this is when the time was last checked
#define HAD_LAST_TIME_OFFSET            "LastTimeOffset"    // For HAD_LAST_TIME_CHECK this is the timezone offset from UTC when the time was last checked
#define HAD_FIRST_CONFIGURED            "FirstConfigured"   // The date this was first configured
#define HAD_BATTERY_LEVEL               "BatteryLevel"      // DEVICEDATA_Battery_Level_CONST
#define HAD_BATTERY_DATE                "BatteryDate"       // The date when the battery level was reported
#define HAD_BATTERY_ALARM               "BatteryAlarm"      // DEVICEDATA_Battery_Alarm_CONST
#define HAD_DOCUMENTATION               "Documentation"  
#define HAD_ALARM                       "sl_Alarm"

[edit] Actions

#define HAD_RECONFIGURE                 "Reconfigure"
#define HAD_REMOVE                      "Remove"
#define HAD_POLL                        "Poll"
#define HAD_SET_POLL_FREQUENCY          "SetPollFrequency"
#define HAD_STRESS_TEST                 "StressTest"
#define HAD_TOGGLE_STATE                "ToggleState"


[edit] ZWaveNetwork

Basic functionality for all ZWave devices

#define ZWN_FILE                        "S_ZWaveNetwork1.xml"
#define ZWN_SID                         "urn:micasaverde-com:serviceId:ZWaveNetwork1"
#define ZWN_STYPE                       "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"

#define ZWN_RESET_NETWORK               "ResetNetwork"
#define ZWN_RECONFIGURE_ALL             "ReconfigureAllNodes"
#define ZWN_REMOVE_NODES                "RemoveNodes"
#define ZWN_ADD_NODES                   "AddNodes"
#define ZWN_DOWNLOAD                    "DownloadNetwork"
#define ZWN_HEAL_NETWORK                "HealNetwork"
#define ZWN_UPDATE_NETWORK              "UpdateNetwork"
#define ZWN_UPDATE_NEIGHBORS            "UpdateNeighbors"
#define ZWN_SET_POLLING                 "SetPolling"
#define ZWN_SEND_DATA                   "SendData"
#define ZWN_POLL_ALL_NODES              "PollAllNodes"
#define ZWN_SOFT_RESET                  "SoftReset"
#define ZWN_BACKUP_DONGLE               "BackupDongle"
#define ZWN_SCENE_IDS                   "SceneIDs"          // For scene controllers, node#-button#=ZWaveSceneID,...
#define ZWN_PUT_BYTE                    "PutByte"

[edit] Variables

#define ZWN_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_HEAL                   "LastHeal"          // DEVICEDATA_LastUpdate_CONST
#define ZWN_ROUTE_FAILURE               "LastRouteFailure"  // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_DONGLE_BACKUP          "LastDongleBackup"
#define ZWN_NET_STATUS_ID               "NetStatusID"  
#define ZWN_NET_STATUS_TEXT             "NetStatusText"  
#define ZWN_COM_PORT                    "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define ZWN_LOCK_COM_PORT               "LockComPort"  
#define ZWN_NODE_ID                     "NodeID"            // The dongle's id
#define ZWN_VERSION_INFO                "VersionInfo"
#define ZWN_HOME_ID                     "HomeID"
#define ZWN_ROLE                        "Role"
#define ZWN_RESET_MODE                  "ResetMode"
#define ZWN_INCLUSION_MODE              "InclusionMode"
#define ZWN_NODETYPE                    "NodeType"
#define ZWN_TIMEOUT                     "Timeout"
#define ZWN_MULTIPLE                    "Multiple"
#define ZWN_SIMULATE_INCOMING           "SimulateIncomingData"
#define ZWN_POLL_ENABLED                "PollingEnabled"
#define ZWN_POLL_DELAY_INITIAL          "PollDelayInitial"
#define ZWN_POLL_DELAY_DEADTIME         "PollDelayDeadTime"
#define ZWN_POLL_MINDELAY               "PollMinDelay"
#define ZWN_POLL_FREQUENCY              "PollFrequency"
#define ZWN_LAST_ERROR                  "LastError"
#define ZWN_DELAY_PROCESSING            "DelayProcessing"
#define ZWN_FAILED_ONLY                 "FailedOnly"
#define ZWN_USE_45                      "Use45"
#define ZWN_USE_MR                      "UseMR"
#define ZWN_TO_3066                     "TO3066"            // indicates when we're going to work around the TO3066 issue
#define ZWN_LIMIT_NEIGHBORS             "LimitNeighbors"    // indicates when we figure manual routing, only consider Z-Wave's neighbors as valid options


[edit] ZWaveDevice

Basic functionality for all ZWave devices

#define ZWDEVICE_FILE                   "S_ZWaveDevice1.xml"
#define ZWDEVICE_SID                    "urn:micasaverde-com:serviceId:ZWaveDevice1"
#define ZWDEVICE_STYPE                  "urn:schemas-micasaverde-com:service:ZWaveDevice:1"

[edit] Variables

#define ZWD_POLL_SETTINGS               "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define ZWD_POLL_COMMANDS               "PollCommands"      // A comma-separated list of command classes/commands to poll.  X means the device won't respond to any poll
#define ZWD_MULTCH_ENDPOINT             "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define ZWD_MULTCH_CAPABIL              "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST

#define ZWD_NEIGHBORS                   "Neighbors"         // DEVICEDATA_Neighbors_to_Call_CONST
#define ZWD_NEIGHBORS_INVERSE           "NeighborsInverse"  // Which neighbors see us
#define ZWD_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
#define ZWD_SECURITY_FAILED             "SecurityFailed"    // Don't talk to this node with security even if it reports it can
#define ZWD_CONFIG                      "Configuration"     // DEVICEDATA_Configuration_CONST
#define ZWD_LAST_RESET                  "LastReset"         // DEVICEDATA_Last_Reset_CONST
#define ZWD_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
#define ZWD_SCENES_TIMESTAMPS           "ScenesTimestamp"   // DEVICEDATA_Scenes_CONST
#define ZWD_WAKEUP_INTERVAL             "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
#define ZWD_LAST_WAKEUP                 "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
#define ZWD_LAST_ROUTE_UPD              "LastRouteUpdate"   // DEVICEDATA_Last_Route_Update_CONST
#define ZWD_HEALTH                      "Health"            // A rating from 0-5
#define ZWD_HEALTH_DATE                 "HealthDate"        // The date the rating was assigned
#define ZWD_VARIABLES_GET               "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
#define ZWD_VARIABLES_SET               "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
#define ZWD_ASSOCIATION_GET             "AssociationGet"    // DEVICEDATA_Association_Get_CONST
#define ZWD_ASSOCIATION_SET             "AssociationSet"    // DEVICEDATA_Association_Set_CONST
#define ZWD_ASSOCIATION_NUM             "AssociationNum"
#define ZWD_NONCE_ACK                   "NonceACK"
#define ZWD_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define ZWD_VERSION_INFO                "VersionInfo"       // DEVICEDATA_Configuration_CONST
#define ZWD_SETPOINT_INFO               "SetPointInfo" 
#define ZWD_NODE_INFO                   "NodeInfo"          // The Z-Wave node info frame
#define ZWD_INITIAL_NAME                "InitialName"       // The name that was initially set when the node was first added
#define ZWD_CONFIGURED_NAME             "ConfiguredName"    // The user-specified name when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_CONFIGURED_VARIABLE         "ConfiguredVariable" // The user-specified VariablesSet when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_CONFIGURED_ASSOC            "ConfiguredAssoc"   // The user-specified AssociationSet when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_DOCUMENTATION               "Documentation"     // For the Z-Wave options page
#define ZWD_METER_TYPE                  "MeterType"
#define ZWD_METER_SCALE                 "MeterScale"
#define ZWD_ALARM_TYPE                  "AlarmType"
#define ZWD_POLL_OK                     "PollOk"
#define ZWD_POLL_TX_FAIL                "PollTxFail"
#define ZWD_POLL_NO_REPLY               "PollNoReply"
#define ZWD_MANUAL_ROUTE                "ManualRoute"       // A route specified by an end-user
#define ZWD_ALL_ROUTES_FAILED           "AllRoutesFailed"
#define ZWD_AUTO_ROUTE                  "AutoRoute"         // A route chosen by profilings
#define ZWD_IGNORE_DIRECT_SCENE         "IgnoreDirectScene" // See notes in IsSceneControllerEvent

[edit] InsteonNetwork

Basic functionality for all Insteon devices

#define INN_FILE                        "S_InsteonNetwork1.xml"
#define INN_SID                         "urn:micasaverde-com:serviceId:InsteonNetwork1"
#define INN_STYPE                       "urn:schemas-micasaverde-org:service:InsteonNetwork:1"

[edit] Actions

#define INN_RESET_NETWORK               "ResetNetwork"
#define INN_REMOVE_NODES                "RemoveNodes"
#define INN_ADD_NODES                   "AddNodes"
#define INN_STOP_ADDREM_NODES           "StopAddRemoveNodes"
#define INN_SEND_DATA                   "SendData"

[edit] Variables

#define INN_COM_PORT                    "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define INN_LOCK_COM_PORT               "LockComPort"  
#define INN_LAST_ERROR                  "LastError"
#define INN_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define INN_NET_STATUS_ID               "NetStatusID"  
#define INN_NET_STATUS_TEXT             "NetStatusText"  
#define INN_POLL_ENABLED                "PollingEnabled"
#define INN_POLL_DELAY_INITIAL          "PollDelayInitial"
#define INN_POLL_DELAY_DEADTIME         "PollDelayDeadTime"
#define INN_POLL_MINDELAY               "PollMinDelay"
#define INN_POLL_FREQUENCY              "PollFrequency"
#define INN_NODE_ID                     "NodeID"            // The dongle's id
#define INN_SL_X10_CODE                 "sl_X10Code"


[edit] InsteonDevice

Basic functionality for all Insteon devices

#define INDEVICE_FILE                   "S_InsteonDevice1.xml"
#define INDEVICE_SID                    "urn:micasaverde-com:serviceId:InsteonDevice1"
#define INDEVICE_STYPE                  "urn:schemas-micasaverde-com:service:InsteonDevice:1"

[edit] Variables

#define IND_POLL_SETTINGS               "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define IND_MULTCH_ENDPOINT             "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define IND_MULTCH_CAPABIL              "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST

#define IND_NEIGHBORS                   "Neighbors"         // DEVICEDATA_Neighbors_to_Call_CONST
#define IND_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
#define IND_CONFIG                      "Configuration"     // DEVICEDATA_Configuration_CONST
#define IND_LAST_RESET                  "LastReset"         // DEVICEDATA_Last_Reset_CONST
#define IND_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
#define IND_WAKEUP_INTERVAL             "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
#define IND_LAST_WAKEUP                 "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
#define IND_LAST_ROUTE_UPD              "LastRouteUpdate"   // DEVICEDATA_Last_Route_Update_CONST
#define IND_VARIABLES_GET               "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
#define IND_VARIABLES_SET               "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
#define IND_ASSOCIATION_GET             "AssociationGet"    // DEVICEDATA_Association_Get_CONST
#define IND_ASSOCIATION_SET             "AssociationSet"    // DEVICEDATA_Association_Set_CONST
#define IND_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define IND_VERSION_INFO                "VersionInfo"       // DEVICEDATA_Configuration_CONST
#define IND_UPDATED_NAME                "UpdatedName"       // DEVICEDATA_Update_Name_CONST


[edit] USB UIRT

Basic functionality for USB UIRT

#define UIRT_FILE                       "S_USBUIRT.xml"
#define UIRT_SID                        "urn:micasaverde-com:serviceId:USBUIRT1"
#define UIRT_TYPE                       "urn:schemas-micasaverde-com:service:USBUIRT:1"

[edit] Variables

#define UIRT_COM_PORT                   "ComPort"


[edit] Camera

Basic functionality for all Cameras

#define CAMDEVICE_FILE                  "S_Camera1.xml"
#define CAMDEVICE_SID                   "urn:micasaverde-com:serviceId:Camera1"
#define CAMDEVICE_STYPE                 "urn:schemas-micasaverde-com:service:Camera:1"

[edit] Variables

#define CAM_USERNAME                    "Username"          // DEVICEDATA_AuthUser_CONST
#define CAM_PASSWORD                    "Password"          // DEVICEDATA_AuthPassword_CONST

#define CAM_RELATED_SENSORS             "RelatedSensors"    // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
#define CAM_SENSOR_ARCHIVE_SEC          "SensorArchiveSeconds" // Integer: And after the sensor(s) are tripped archive the video for  seconds.
#define CAM_RELATED_LIGHTS              "RelatedLights"     // Comma separated list: Which lights should be turned on when viewing this camera:
#define CAM_LIGHT_OPTIONS               "LightOptions"      // V=When I view the camera from the web or phone.
                                                            // S=When the sensor(s) above are tripped and they are armed
                                                            // B=When the sensors above are tripped and they are *not* armed
                                                            // A=When you take an automatic picture for the archive
                                                            // So: VSBA means do them all

#define CAM_AUTO_ARCH_SEC               "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds
#define CAM_AUTO_PRES_DAYS              "AutoArchivePreserveDays" // and keep the pictures x days
#define CAM_URL                         "URL"               // DEVICEDATA_Path_CONST
#define CAM_DIRECT_URL                  "DirectStreamingURL"
#define CAM_TIMEOUT                     "Timeout"


[edit] PanTiltZoom

For Cameras

#define PTZ_FILE                        "S_PanTiltZoom1.xml"
#define PTZ_SID                         "urn:micasaverde-com:serviceId:PanTiltZoom1"
#define PTZ_STYPE                       "urn:schemas-micasaverde-com:service:PanTiltZoom:1"

[edit] Actions

#define PTZ_LEFT                        "MoveLeft"
#define PTZ_RIGHT                       "MoveRight"
#define PTZ_UP                          "MoveUp"
#define PTZ_DOWN                        "MoveDown"
#define PTZ_IN                          "ZoomIn"
#define PTZ_OUT                         "ZoomOut"


[edit] SwitchPower1

#define SWP_SID                         "urn:upnp-org:serviceId:SwitchPower1"

[edit] Actions

#define SWP_SET_TARGET                  "SetTarget"

[edit] Variables

#define SWP_STATUS                      "Status" 
#define SWP_TARGET                      "Target"


[edit] S_WindowCovering1

#define WC_SID                          "urn:upnp-org:serviceId:WindowCovering1"

[edit] Actions

#define WC_UP                           "Up"
#define WC_DOWN                         "Down"
#define WC_STOP                         "Stop"

[edit] Variables

#define WC_STATUS                       "Status"
#define WC_TARGET                       "Target"


[edit] Dimming1

#define SWD_SID                         "urn:upnp-org:serviceId:Dimming1"

[edit] Actions

#define SWD_SET_LOAD_LEVEL              "SetLoadLevelTarget"

[edit] Variables

#define SWD_LOAD_LEVEL_STATUS           "LoadLevelStatus"
#define SWD_LOAD_LEVEL_TARGET           "LoadLevelTarget"


[edit] DoorLock1

#define DL_SID                          "urn:micasaverde-com:serviceId:DoorLock1"

[edit] Actions

#define DL_SET_TARGET                   "SetTarget"
#define DL_SET_PIN                      "SetPin"
#define DL_CLEAR_PIN                    "ClearPin"
#define DL_SET_PIN_DATE                 "SetPinValidityDate"
#define DL_SET_PIN_WEEK                 "SetPinValidityWeekly"
#define DL_CLEAR_PIN_VALID              "ClearPinValidity"

[edit] Variables

#define DL_STATUS                       "Status"
#define DL_TARGET                       "Target"
#define DL_MIN_PIN_SIZE                 "MinPinSize"
#define DL_MAX_PIN_SIZE                 "MaxPinSize"
#define DL_KEEP_PIN_CODES               "KeepPinCodes"
#define DL_SL_USER_CODE                 "sl_UserCode"
#define DL_SL_PIN_FAILED                "sl_PinFailed"
#define DL_SL_LOCK_BUTTON               "sl_LockButton"
#define DL_SL_LOCK_FAILURE              "sl_LockFailure"
#define DL_SL_UNAUTH_USER               "sl_UnauthUser"
#define DL_SL_LOW_BATTERY               "sl_LowBattery"
#define DL_SL_VERY_LOW_BATTERY          "sl_VeryLowBattery"
#define DL_SL_CODE_CHANGED              "sl_CodeChanged"

#define DL_PIN_CODES                    "PinCodes"      // DEVICEDATA_PIN_Codes_CONST
#define DL_NUM_SCHEDULES                "NumSchedules"  // DEVICEDATA_PIN_Codes_CONST


[edit] HVAC_UserOperatingMode1

#define HVACO_SID                       "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"

[edit] Actions

#define HVACO_SET_MODE                  "SetModeTarget"

[edit] Variables

#define HVACO_TARGET                    "ModeTarget"
#define HVACO_STATUS                    "ModeStatus"
#define HVACO_SUPPORTED                 "SupportedType"

[edit] HVAC_OperatingState1

#define HVACS_SID                       "urn:micasaverde-com:serviceId:HVAC_OperatingState1"

[edit] Variables

#define HVACS_STATE                     "ModeState"
#define HVACS_STATE_ENERGY              "ModeStateForEnergy"


[edit] HVAC_FanOperatingMode1

#define HVACF_SID                       "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"

[edit] Actions

#define HVACF_SET_MODE                  "SetMode"

[edit] Variables

#define HVACF_STATUS                    "Mode"


[edit] TemperatureSetpoint1_Heat/Cool

#define HVACHEAT_SID                    "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
#define HVACCOOL_SID                    "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"

[edit] Actions

#define HVACHC_SETPOINT                 "SetCurrentSetpoint"

[edit] Variables

#define HVACHC_CURRENTSP                "CurrentSetpoint"
#define HVACHC_SETPOINT_TARGET          "SetpointTarget"


[edit] TemperatureSensor1

#define TEMP_SID                        "urn:upnp-org:serviceId:TemperatureSensor1"

[edit] Variables

#define TEMP_CURRENT                    "CurrentTemperature"


[edit] LightSensor1

#define LIGHT_SID                       "urn:micasaverde-com:serviceId:LightSensor1"

[edit] Variables

#define LIGHT_CURRENT                   "CurrentLevel"


[edit] HumiditySensor1

#define HUM_SID                         "urn:micasaverde-com:serviceId:HumiditySensor1"

[edit] Variables

#define HUM_CURRENT                     "CurrentLevel"


[edit] SecuritySensor1

#define SES_SID                         "urn:micasaverde-com:serviceId:SecuritySensor1"

[edit] Variables

#define SES_ARMED                       "Armed"
#define SES_TRIPPED                     "Tripped"
#define SES_LAST_TRIP                   "LastTrip"

[edit] Action

#define SES_SET_ARMED                   "SetArmed"


[edit] EnergyMetering1

#define ENE_SID                         "urn:micasaverde-com:serviceId:EnergyMetering1"

[edit] Actions

#define ENE_RESETKWH                    "ResetKWH"      // Reset Kwh

[edit] Variables

#define ENE_KWH                         "KWH"
#define ENE_KWH_READING                 "KWHReading"    // The time it was last read
#define ENE_KVARH                       "kVARh"
#define ENE_KVAR                        "kVAR"
#define ENE_WATTS                       "Watts"
#define ENE_PULSE                       "Pulse"
#define ENE_ACTUAL                      "ActualUsage"
#define ENE_USER_SUPPLIED               "UserSuppliedWattage"
#define ENE_WHOLE_HOUSE                 "WholeHouse"
#define ENE_LOG                         "Log"


[edit] IrTransmitter1

#define IRT_SID                         "urn:micasaverde-com:serviceId:IrTransmitter1"

[edit] Variables

#define IRT_SENDPRONTO                  "SendProntoCode"


[edit] SerialPort1

#define SPT_SID                         "urn:micasaverde-org:serviceId:SerialPort1"

[edit] Variables

#define SPT_BAUD                        "baud"
#define SPT_VENDOR                      "vendor"
#define SPT_PRODUCT                     "product"
#define SPT_PATH                        "path"


[edit] SceneController1

#define SCR_SID                         "urn:micasaverde-com:serviceId:SceneController1"

[edit] Variables

#define SCR_SL_SCENE_ACTIVATED          "sl_SceneActivated"
#define SCR_SL_SCENE_DEACTIVATED        "sl_SceneDeactivated"
#define SCR_SCENES                      "Scenes"
#define SCR_LAST_SCENE_ID               "LastSceneID"
#define SCR_LAST_SCENE_TIME             "LastSceneTime"
#define SCR_MANAGE_LEDS                 "ManageLeds"
#define SCR_NUM_BUTTONS                 "NumButtons"
#define SCR_FIRES_OFF_EVENTS            "FiresOffEvents"
#define SCR_SCENE_SHORTCUTS             "SceneShortcuts"
#define SCR_ACTIVATION_METHOD           "ActivationMethod"  // 1=BASIC_SET only (ignore scene_activate) 2=SCENE_ACTIVATE only (ignore basic set).  0=anything goes


[edit] SceneControllerLED1

#define SCL_SID                         "urn:micasaverde-com:serviceId:SceneControllerLED1"

[edit] Actions

#define SCL_SET_LIGHT                   "SetLight"

[edit] Variables

#define SCL_LIGHT_SETTINGS              "LightSettings"


[edit] GenericIO

#define GIO_SID                         "urn:micasaverde-com:serviceId:GenericIO"

[edit] Variables

#define GIO_IS_INPUT                    "IsInput"           // DEVICEDATA_InputOrOutput_CONST, 1 if it's input
#define GIO_DEFAULT_STATE               "DefaultState"      // DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed


[edit] IR

#define IR_SID                          "urn:micasaverde-com:serviceId:IrDevice1"

[edit] Actions

#define IR_SEND_CODE                    "SendCode"

[edit] Variables

#define IR_CODESETS                     "Codesets"
#define IR_CODESET                      "Codeset"
#define IR_REMOTE                       "Remote"
#define IR_MFRID                        "MfrId"
Personal tools