Luup UPNP Files

From MiOS
(Difference between revisions)
Jump to: navigation, search
m (Device Categories)
 
(76 intermediate revisions by 3 users not shown)
Line 1: Line 1:
The following is the contents of the file "Constant.h" which defines the strings used for file device types, services, actions, variables, etc.
+
[[Category:Development]]
 +
The following is the contents of the file ''Constants.h'' which defines the strings used for file device types, services, actions, variables, etc.
  
/*
+
<pre>/*
Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation
+
Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation  
 +
All rights reserved. This software may not be used or distributed without express consent.
 +
*/</pre>
  
All rights reserved.  This software may not be used or distributed without express consent
 
  
*/
+
== Device Types ==
  
#ifndef Constants_h
+
<pre>#define DEVICETYPE_HOME_AUTO_GATEWAY    "urn:schemas-micasaverde-com:device:HomeAutomationGateway:1"
#define Constants_h
+
#define DEVICETYPE_BINARY_LIGHT        "urn:schemas-upnp-org:device:BinaryLight:1"
 +
#define DEVICETYPE_DIMMABLE_LIGHT      "urn:schemas-upnp-org:device:DimmableLight:1"
 +
#define DEVICETYPE_THERMOSTAT          "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
 +
#define DEVICETYPE_HEATER              "urn:schemas-upnp-org:device:Heater:1"
 +
#define DEVICETYPE_HUMIDITY_SENSOR      "urn:schemas-micasaverde-com:device:HumiditySensor:1"
 +
#define DEVICETYPE_MULTI_IO            "urn:schemas-micasaverde-com:device:MultiIO:1"
 +
#define DEVICETYPE_DOOR_LOCK            "urn:schemas-micasaverde-com:device:DoorLock:1"
 +
#define DEVICETYPE_DOOR_SENSOR          "urn:schemas-micasaverde-com:device:DoorSensor:1"
 +
#define DEVICETYPE_ZWAVE_NETWORK        "urn:schemas-micasaverde-com:device:ZWaveNetwork:1"
 +
#define DEVICETYPE_ZIGBEE_NETWORK      "urn:schemas-micasaverde-com:device:ZigbeeNetwork:1"
 +
#define DEVICETYPE_INSTEON_NETWORK      "urn:schemas-micasaverde-com:device:InsteonNetwork:1"
 +
#define DEVICETYPE_USB_UIRT            "urn:schemas-micasaverde-com:device:USBUIRT:1"
 +
#define DEVICETYPE_TEMPERATURE_SENSOR  "urn:schemas-micasaverde-com:device:TemperatureSensor:1"
 +
#define DEVICETYPE_POWER_METER          "urn:schemas-micasaverde-com:device:PowerMeter:1"
 +
#define DEVICETYPE_MOTION_SENSOR        "urn:schemas-micasaverde-com:device:MotionSensor:1"
 +
#define DEVICETYPE_SMOKE_SENSOR        "urn:schemas-micasaverde-com:device:SmokeSensor:1"
 +
#define DEVICETYPE_GENERIC_SENSOR      "urn:schemas-micasaverde-com:device:GenericSensor:1"
 +
#define DEVICETYPE_LIGHT_SENSOR        "urn:schemas-micasaverde-com:device:LightSensor:1"
 +
#define DEVICETYPE_IR_TRANSMITTER      "urn:schemas-micasaverde-com:device:IrTransmitter:1"
 +
#define DEVICETYPE_WINDOW_COVERING      "urn:schemas-micasaverde-com:device:WindowCovering:1"
 +
#define DEVICETYPE_GENERIC_IO          "urn:schemas-micasaverde-com:device:GenericIO:1"
 +
#define DEVICETYPE_REMOTE_CONTROL      "urn:schemas-micasaverde-com:device:RemoteControl:1"
 +
#define DEVICETYPE_COMBO_DEVICE        "urn:schemas-micasaverde-com:device:ComboDevice:1"
 +
#define DEVICETYPE_CAMERA              "urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
 +
#define DEVICETYPE_CAMERA2              "urn:schemas-upnp-org:device:DigitalSecurityCamera:2"
 +
#define DEVICETYPE_SERIALPORT          "urn:micasaverde-org:device:SerialPort:1"
 +
#define DEVICETYPE_SERIALPORTROOT      "urn:micasaverde-org:device:SerialPortRoot:1"
 +
#define DEVICETYPE_SCENE_CONTROLLER    "urn:schemas-micasaverde-com:device:SceneController:1"
 +
#define DEVICETYPE_SCENE_CONTR_LED      "urn:schemas-micasaverde-com:device:SceneControllerLED:1"
 +
#define DEVICETYPE_ENERGY_CALCULATOR    "urn:schemas-micasaverde-com:device:EnergyCalculator:1"
 +
#define DEVICETYPE_TEMP_LEAK_SENSOR    "urn:schemas-micasaverde-com:device:TempLeakSensor:1"
 +
#define DEVICETYPE_RELAY                "urn:schemas-micasaverde-com:device:Relay:1"
 +
#define DEVICETYPE_ALARMPANEL          "urn:schemas-micasaverde-com:device:AlarmPanel:1"
 +
#define DEVICETYPE_ALARMPARTITION1      "urn:schemas-micasaverde-com:device:AlarmPartition:1"
 +
#define DEVICETYPE_ALARMPARTITION2      "urn:schemas-micasaverde-com:device:AlarmPartition:2"
 +
#define DEVICETYPE_SIREN                "urn:schemas-micasaverde-com:device:Siren:1"
 +
#define DEVICETYPE_FLOOD_SENSOR        "urn:schemas-micasaverde-com:device:FloodSensor:1"
  
// Device Types
+
#define DEVICETYPE_SCENE                "urn:schemas-micasaverde-com:device:Scene:1"</pre>
#define DEVICETYPE_BINARY_LIGHT "urn:schemas-upnp-org:device:BinaryLight:1"
+
#define DEVICETYPE_DIMMABLE_LIGHT "urn:schemas-upnp-org:device:DimmableLight:1"
+
#define DEVICETYPE_THERMOSTAT "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
+
#define DEVICETYPE_HUMIDITY_SENSOR "urn:schemas-micasaverde-com:device:HumiditySensor:1"
+
#define DEVICETYPE_MULTI_IO "urn:schemas-micasaverde-com:device:MultiIO:1"
+
#define DEVICETYPE_DOOR_LOCK "urn:schemas-micasaverde-com:device:DoorLock:1"
+
#define DEVICETYPE_DOOR_SENSOR "urn:schemas-micasaverde-com:device:DoorSensor:1"
+
#define DEVICETYPE_ZWAVE_NETWORK "urn:schemas-micasaverde-com:device:ZWaveNetwork:1"
+
#define DEVICETYPE_TEMPERATURE_SENSOR "urn:schemas-micasaverde-com:device:TemperatureSensor:1"
+
#define DEVICETYPE_MOTION_SENSOR "urn:schemas-micasaverde-com:device:MotionSensor:1"
+
#define DEVICETYPE_LIGHT_SENSOR "urn:schemas-micasaverde-com:device:LightSensor:1"
+
#define DEVICETYPE_IR_TRANSMITTER "urn:schemas-micasaverde-com:device:IrTransmitter:1"
+
#define DEVICETYPE_WINDOW_COVERING "urn:schemas-micasaverde-com:device:WindowCovering:1"
+
#define DEVICETYPE_GENERIC_IO "urn:schemas-micasaverde-com:device:GenericIO:1"
+
#define DEVICETYPE_REMOTE_CONTROL "urn:schemas-micasaverde-com:device:RemoteControl:1"
+
#define DEVICETYPE_COMBO_DEVICE "urn:schemas-micasaverde-com:device:ComboDevice:1"
+
#define DEVICETYPE_CAMERA "urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
+
#define DEVICETYPE_SERIALPORT "urn:micasaverde-org:device:SerialPort:1"
+
#define DEVICETYPE_SCENE_CONTROLLER "urn:schemas-micasaverde-com:device:SceneController:1"
+
  
// Device Files
+
=== IR Device Types ===
#define DEVICEFILE_BINARY_LIGHT "D_BinaryLight1.xml"
+
<pre>#define DEVICETYPE_IR                  "urn:schemas-micasaverde-com:device:IrDevice:1"
#define DEVICEFILE_DIMMABLE_LIGHT "D_DimmableLight1.xml"
+
#define DEVICETYPE_TV                  "urn:schemas-micasaverde-com:device:tv:1"
#define DEVICEFILE_THERMOSTAT "D_HVAC_ZoneThermostat1.xml"
+
#define DEVICETYPE_CABLE                "urn:schemas-micasaverde-com:device:cable:1"
#define DEVICEFILE_HUMIDITY_SENSOR "D_HumiditySensor1.xml"
+
#define DEVICETYPE_SATELLITE            "urn:schemas-micasaverde-com:device:satellite:1"
#define DEVICEFILE_MULTI_IO "D_GC100.xml"
+
#define DEVICETYPE_VIDEO_ACCESSORY      "urn:schemas-micasaverde-com:device:videoaccessory:1"
#define DEVICEFILE_DOOR_LOCK "D_DoorLock1.xml"
+
#define DEVICETYPE_VCR_DVR              "urn:schemas-micasaverde-com:device:vcrdvd:1"
#define DEVICEFILE_DOOR_SENSOR "D_MotionSensor1.xml"
+
#define DEVICETYPE_DVD_BLURAY          "urn:schemas-micasaverde-com:device:dvdbluray:1"
#define DEVICEFILE_ZWAVE_NETWORK "D_ZWaveNetwork.xml"
+
#define DEVICETYPE_RECEIVER            "urn:schemas-micasaverde-com:device:receiver:1"
#define DEVICEFILE_TEMPERATURE_SENSOR "D_TemperatureSensor1.xml"
+
#define DEVICETYPE_AMP                  "urn:schemas-micasaverde-com:device:amp:1"
#define DEVICEFILE_MOTION_SENSOR "D_MotionSensor1.xml"
+
#define DEVICETYPE_CD                  "urn:schemas-micasaverde-com:device:cd:1"
#define DEVICEFILE_LIGHT_SENSOR "D_LightSensor1.xml"
+
#define DEVICETYPE_MISC_HOME_CONTROL    "urn:schemas-micasaverde-com:device:mischomecontrol:1"
#define DEVICEFILE_IR_TRANSMITTER "D_IrTransmitter1.xml"
+
#define DEVICETYPE_AV_MISC              "urn:schemas-micasaverde-com:device:avmisc:1"
#define DEVICEFILE_WINDOW_COVERING "D_DimmableLight1.xml"
+
#define DEVICETYPE_VIRTUAL_DEVICE      "urn:schemas-micasaverde-com:device:VirtualDevice:1"</pre>
#define DEVICEFILE_GENERIC_IO "D_BinaryLight1.xml"
+
#define DEVICEFILE_REMOTE_CONTROL "D_BinaryLight1.xml"
+
#define DEVICEFILE_COMBO_DEVICE "D_BinaryLight1.xml"
+
#define DEVICEFILE_CAMERA "D_DigitalSecurityCamera1.xml"
+
#define DEVICEFILE_SCENE_CONTROLLER "D_DoorLock1.xml"
+
  
// Device Categories
+
== Device Files ==
#define DEVICE_CATEGORY_INTERFACE 1
+
#define DEVICE_CATEGORY_DIMMABLE_LIGHT 2
+
#define DEVICE_CATEGORY_SWITCH 3
+
#define DEVICE_CATEGORY_SECURITY_SENSOR 4
+
#define DEVICE_CATEGORY_HVAC 5
+
#define DEVICE_CATEGORY_CAMERA 6
+
#define DEVICE_CATEGORY_DOOR_LOCK 7
+
#define DEVICE_CATEGORY_WINDOW_COV 8
+
#define DEVICE_CATEGORY_REMOTE_CONTROL 9
+
#define DEVICE_CATEGORY_IR_TX 10
+
#define DEVICE_CATEGORY_GENERIC_IO 11
+
#define DEVICE_CATEGORY_GENERIC_SENSOR 12
+
  
// Cast the second one between int and char * so we can use a simple
+
<pre>#define DEVICEFILE_BINARY_LIGHT        "D_BinaryLight1.xml"
// array that's fast to iterate and not use an stl map
+
#define DEVICEFILE_DIMMABLE_LIGHT      "D_DimmableLight1.xml"
extern const char *g_DeviceCategories[];
+
#define DEVICEFILE_THERMOSTAT          "D_HVAC_ZoneThermostat1.xml"
extern const char *g_DeviceDescriptions[];  // Default descriptions
+
#define DEVICEFILE_HEATER              "D_Heater1.xml"
 +
#define DEVICEFILE_HUMIDITY_SENSOR      "D_HumiditySensor1.xml"
 +
#define DEVICEFILE_MULTI_IO            "D_GC100.xml"
 +
#define DEVICEFILE_DOOR_LOCK            "D_DoorLock1.xml"
 +
#define DEVICEFILE_DOOR_SENSOR          "D_DoorSensor1.xml"
 +
#define DEVICEFILE_ZWAVE_NETWORK        "D_ZWaveNetwork.xml"
 +
#define DEVICEFILE_INSTEON_NETWORK      "D_InsteonNetwork.xml"
 +
#define DEVICEFILE_USB_UIRT            "D_USB_UIRT.xml"
 +
#define DEVICEFILE_TEMPERATURE_SENSOR  "D_TemperatureSensor1.xml"
 +
#define DEVICEFILE_POWER_METER          "D_PowerMeter1.xml"
 +
#define DEVICEFILE_MOTION_SENSOR        "D_MotionSensor1.xml"
 +
#define DEVICEFILE_SMOKE_SENSOR        "D_SmokeSensor1.xml"
 +
#define DEVICEFILE_GENERIC_SENSOR      "D_GenericSensor1.xml"
 +
#define DEVICEFILE_LIGHT_SENSOR        "D_LightSensor1.xml"
 +
#define DEVICEFILE_IR_TRANSMITTER      "D_IrTransmitter1.xml"
 +
#define DEVICEFILE_IR_DEVICE            "D_IrDevice1.xml"
 +
#define DEVICEFILE_WINDOW_COVERING      "D_WindowCovering1.xml"
 +
#define DEVICEFILE_SERIAL_PORT_ROOT    "D_SerialPortRoot1.xml"
 +
#define DEVICEFILE_GENERIC_IO          "D_GenericIO1.xml"
 +
#define DEVICEFILE_REMOTE_CONTROL      "D_RemoteControl1.xml"
 +
#define DEVICEFILE_COMBO_DEVICE        "D_ComboDevice1.xml"
 +
#define DEVICEFILE_CAMERA              "D_DigitalSecurityCamera1.xml"
 +
#define DEVICEFILE_SCENE_CONTROLLER    "D_SceneController1.xml"
 +
#define DEVICEFILE_SCENE_CONTR_LED      "D_SceneControllerLED1.xml"
 +
#define DEVICEFILE_ENERGY_CALCULATOR    "D_EnergyCalculator1.xml"
 +
#define DEVICEFILE_AV_MISC              "D_AvMisc1.xml"
 +
#define DEVICEFILE_TEMP_LEAK_SENSOR    "D_TempLeakSensor1.xml"
 +
#define DEVICEFILE_RELAY                "D_Relay1.xml"
 +
#define DEVICEFILE_SIREN                "D_Siren1.xml"
 +
#define DEVICEFILE_FLOOD_SENSOR        "D_FloodSensor1.xml"
  
// These are stored in the json file for the device itself and not part of the UPNP variables:
+
#define DEVICEFILE_AV_SCENE            "D_Scene1.xml"</pre>
  
/*
+
== Device Categories ==
Device_Num
+
See [[Luup Device Categories]].
FK_DevType
+
Device_Num_Parent
+
FK_Device_Category
+
Room_Num
+
  
Description
+
== HaGateway ==
InternalID // DEVICEDATA_PortChannel_Number_CONST
+
Basic functionality for the gateway itself
Manufacturer // DEVICEDATA_Manufacturer_Desc_CONST
+
Model // DEVICEDATA_Model_Desc_CONST
+
IPAddress
+
MacAddress
+
UPnPDeviceFile  // DEVICEDATA_UPnP_Dev_File_CONST
+
*/
+
  
// ============  HaGateway  ============
+
<pre>#define HAGEVICE_FILE                  "S_HomeAutomationGateway1.xml"
// Basic functionality for the gateway itself
+
#define HAGEVICE_SID                    "urn:micasaverde-com:serviceId:HomeAutomationGateway1"
 +
#define HAGEVICE_STYPE                  "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"</pre>
  
#define HAGEVICE_FILE "S_HomeAutomationGateway1.xml"
+
=== Variables ===
#define HAGEVICE_SID "urn:micasaverde-com:serviceId:HomeAutomationGateway1"
+
<pre>#define HAG_ACTIVE_SCENES              "ActiveScenes"
#define HAGEVICE_STYPE "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"
+
#define HAG_DATAVERSION_USERDATA        "DataVersionUserData" // The current data version for user_data
 +
#define HAG_DATAVERSION_STATUS          "DataVersionStatus" // The current data version for lu_status</pre>
  
// Variables
+
=== Actions ===
 +
<pre>#define HAG_GET_USER_DATA "GetUserData" 
 +
#define HAG_MODIFY_USER_DATA "ModifyUserData"
 +
#define HAG_MODIFY_GET_VARIABLE "GetVariable"
 +
#define HAG_MODIFY_SET_VARIABLE "SetVariable"
 +
#define HAG_MODIFY_GET_STATUS "GetStatus"
 +
#define HAG_MODIFY_GET_ACTIONS "GetActions"
 +
#define HAG_MODIFY_CREATE_DEVICE "CreateDevice"
 +
#define HAG_MODIFY_DELETE_DEVICE "DeleteDevice"
 +
#define HAG_MODIFY_CREATE_PLUGIN "CreatePlugin"
 +
#define HAG_MODIFY_DELETE_PLUGIN "DeletePlugin"
 +
#define HAG_MODIFY_CREATE_PLUGIN_DEVICE "CreatePluginDevice"
 +
#define HAG_IMPORT_UPNP_DEVICE "ImportUpnpDevice"
 +
#define HAG_PROCESS_CHILD "ProcessChildDevices"
 +
#define HAG_RELOAD "Reload"
 +
#define HAG_RUN_SCENE "RunScene"
 +
#define HAG_SCENE_OFF "SceneOff"
 +
#define HAG_RUN_LUA "RunLua"
 +
#define HAG_LOG_IP_REQUEST "LogIpRequest"</pre>
  
// Actions
+
== HaDevice ==
#define HAG_GET_USER_DATA "GetUserData" 
+
Basic functionality for all home automation devices
#define HAG_MODIFY_USER_DATA "ModifyUserData"
+
#define HAG_MODIFY_GET_VARIABLE "GetVariable"
+
#define HAG_MODIFY_SET_VARIABLE "SetVariable"
+
#define HAG_MODIFY_GET_STATUS "GetStatus"
+
#define HAG_MODIFY_GET_ACTIONS "GetActions"
+
#define HAG_MODIFY_CREATE_DEVICE "CreateDevice"
+
#define HAG_PROCESS_CHILD "ProcessChildDevices"
+
#define HAG_RELOAD "Reload"
+
#define HAG_RUN_SCENE "RunScene"
+
#define HAG_RUN_LUA "RunLua"
+
  
 +
<pre>#define HADEVICE_FILE                  "S_HaDevice1.xml"
 +
#define HADEVICE_SID                    "urn:micasaverde-com:serviceId:HaDevice1"
 +
#define HADEVICE_STYPE                  "urn:schemas-micasaverde-com:service:HaDevice:1"</pre>
  
// ============  HaDevice  ============
+
=== Variables ===
// Basic functionality for all home automation devices
+
<pre>#define HAD_ENERGY_LOG                  "EnergyLog"        // DEVICEDATA_Energy_Log_CONST
 +
#define HAD_IOPORT_DEVICE              "IODevice"          // The device number to connect to for IO (this is on the master device)
 +
#define HAD_IOPORT_DEVICE_XREF          "IODeviceXRef"      // On the port, this is the device number that connects to it
 +
#define HAD_IOPORT_MAX_TIME            "MaxTime"          // The maximum time to leave the socket open before closing and re-opening
 +
#define HAD_IOPORT_PORT                "IOPort"            // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
 +
#define HAD_IOPORT_PATH                "IOPortPath"        // Read-only, created at each boot, has the current path to the port
 +
#define HAD_IGNORE_ROOM                "IgnoreRoom"        // DEVICEDATA_Room_Not_Required_CONST
 +
#define HAD_COMM_FAILURE                "CommFailure"
 +
#define HAD_POLLING_ENABLED            "PollingEnabled"
 +
#define HAD_POLL_MIN_DELAY              "PollMinDelay"
 +
#define HAD_CONFIGURED                  "Configured"
 +
#define HAD_JOBID                      "JobID"
 +
#define HAD_REVERSE                    "ReverseOnOff"      // DEVICEDATA_Reverse_CONST
 +
#define HAD_LAST_UPDATE                "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
 +
#define HAD_LAST_ACTIVITY              "LastActivity"      // Used by the OPower plugin
 +
#define HAD_AUTO_CONFIGURE              "AutoConfigure"    // DEVICEDATA_Auto_Configure_CONST
 +
#define HAD_LAST_TIME_CHECK            "LastTimeCheck"    // Only for devices that are capable of implementing time this is when the time was last checked
 +
#define HAD_LAST_TIME_OFFSET            "LastTimeOffset"    // For HAD_LAST_TIME_CHECK this is the timezone offset from UTC when the time was last checked
 +
#define HAD_FIRST_CONFIGURED            "FirstConfigured"  // The date this was first configured
 +
#define HAD_BATTERY_LEVEL              "BatteryLevel"      // DEVICEDATA_Battery_Level_CONST
 +
#define HAD_BATTERY_DATE                "BatteryDate"      // The date when the battery level was reported
 +
#define HAD_BATTERY_ALARM              "BatteryAlarm"      // DEVICEDATA_Battery_Alarm_CONST
 +
#define HAD_DOCUMENTATION              "Documentation" 
 +
#define HAD_ALARM                      "sl_Alarm"</pre>
  
#define HADEVICE_FILE "S_HaDevice1.xml"
+
=== Actions ===
#define HADEVICE_SID "urn:micasaverde-com:serviceId:HaDevice1"
+
<pre>#define HAD_RECONFIGURE                "Reconfigure"
#define HADEVICE_STYPE "urn:schemas-micasaverde-com:service:HaDevice:1"
+
#define HAD_REMOVE                      "Remove"
 +
#define HAD_POLL                        "Poll"
 +
#define HAD_SET_POLL_FREQUENCY          "SetPollFrequency"
 +
#define HAD_STRESS_TEST                "StressTest"
 +
#define HAD_TOGGLE_STATE                "ToggleState"</pre>
  
// Variables
 
#define HAD_ENERGY_LOG "EnergyLog" // DEVICEDATA_Energy_Log_CONST
 
#define HAD_WATTS "Watts" // DEVICEDATA_Wattage_CONST
 
#define HAD_IOPORT_DEVICE "IODevice" // The device number to connect to for IO (this is on the master device)
 
#define HAD_IOPORT_PORT "IOPort" // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
 
#define HAD_IGNORE_ROOM "IgnoreRoom"
 
#define HAD_COMM_FAILURE "CommFailure"
 
#define HAD_POLLING_ENABLED "PollingEnabled"
 
#define HAD_POLL_MIN_DELAY "PollMinDelay"
 
#define HAD_CONFIGURED "Configured"
 
#define HAD_JOBID "JobID"
 
  
#define HAD_RECONFIGURE "Reconfigure"
+
== ZWaveNetwork ==
#define HAD_REMOVE "Remove"
+
Basic functionality for all ZWave devices
#define HAD_POLL "Poll"
+
#define HAD_SET_POLL_FREQUENCY "SetPollFrequency"
+
  
// ============  ZWaveNetwork  ============
+
<pre>#define ZWN_FILE                        "S_ZWaveNetwork1.xml"
// Basic functionality for all ZWave devices
+
#define ZWN_SID                        "urn:micasaverde-com:serviceId:ZWaveNetwork1"
 +
#define ZWN_STYPE                      "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"
  
#define ZWN_FILE "S_ZWaveNetwork1.xml"
+
#define ZWN_RESET_NETWORK              "ResetNetwork"
#define ZWN_SID "urn:micasaverde-com:serviceId:ZWaveNetwork1"
+
#define ZWN_RECONFIGURE_ALL            "ReconfigureAllNodes"
#define ZWN_STYPE "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"
+
#define ZWN_REMOVE_NODES                "RemoveNodes"
 +
#define ZWN_ADD_NODES                  "AddNodes"
 +
#define ZWN_DOWNLOAD                    "DownloadNetwork"
 +
#define ZWN_HEAL_NETWORK                "HealNetwork"
 +
#define ZWN_UPDATE_NETWORK              "UpdateNetwork"
 +
#define ZWN_UPDATE_NEIGHBORS            "UpdateNeighbors"
 +
#define ZWN_SET_POLLING                "SetPolling"
 +
#define ZWN_SEND_DATA                  "SendData"
 +
#define ZWN_POLL_ALL_NODES              "PollAllNodes"
 +
#define ZWN_SOFT_RESET                  "SoftReset"
 +
#define ZWN_BACKUP_DONGLE              "BackupDongle"
 +
#define ZWN_SCENE_IDS                  "SceneIDs"          // For scene controllers, node#-button#=ZWaveSceneID,...
 +
#define ZWN_PUT_BYTE                    "PutByte"</pre>
  
#define ZWN_RESET_NETWORK "ResetNetwork"
+
=== Variables ===
#define ZWN_REMOVE_NODES "RemoveNodes"
+
<pre>#define ZWN_LAST_UPDATE                "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define ZWN_ADD_NODES "AddNodes"
+
#define ZWN_LAST_HEAL                  "LastHeal"          // DEVICEDATA_LastUpdate_CONST
#define ZWN_DOWNLOAD "DownloadNetwork"
+
#define ZWN_ROUTE_FAILURE              "LastRouteFailure"  // DEVICEDATA_LastUpdate_CONST
#define ZWN_HEAL_NETWORK "HealNetwork"
+
#define ZWN_LAST_DONGLE_BACKUP          "LastDongleBackup"
#define ZWN_SET_POLLING "SetPolling"
+
#define ZWN_NET_STATUS_ID              "NetStatusID" 
#define ZWN_SEND_DATA "SendData"
+
#define ZWN_NET_STATUS_TEXT            "NetStatusText" 
#define ZWN_POLL_ALL_NODES "PollAllNodes"
+
#define ZWN_COM_PORT                    "ComPort"          // DEVICEDATA_COM_Port_on_PC_CONST
 +
#define ZWN_LOCK_COM_PORT              "LockComPort" 
 +
#define ZWN_NODE_ID                    "NodeID"            // The dongle's id
 +
#define ZWN_VERSION_INFO                "VersionInfo"
 +
#define ZWN_HOME_ID                    "HomeID"
 +
#define ZWN_ROLE                        "Role"
 +
#define ZWN_RESET_MODE                  "ResetMode"
 +
#define ZWN_INCLUSION_MODE              "InclusionMode"
 +
#define ZWN_NODETYPE                    "NodeType"
 +
#define ZWN_TIMEOUT                    "Timeout"
 +
#define ZWN_MULTIPLE                    "Multiple"
 +
#define ZWN_SIMULATE_INCOMING          "SimulateIncomingData"
 +
#define ZWN_POLL_ENABLED                "PollingEnabled"
 +
#define ZWN_POLL_DELAY_INITIAL          "PollDelayInitial"
 +
#define ZWN_POLL_DELAY_DEADTIME        "PollDelayDeadTime"
 +
#define ZWN_POLL_MINDELAY              "PollMinDelay"
 +
#define ZWN_POLL_FREQUENCY              "PollFrequency"
 +
#define ZWN_LAST_ERROR                  "LastError"
 +
#define ZWN_DELAY_PROCESSING            "DelayProcessing"
 +
#define ZWN_FAILED_ONLY                "FailedOnly"
 +
#define ZWN_USE_45                      "Use45"
 +
#define ZWN_USE_MR                      "UseMR"
 +
#define ZWN_TO_3066                    "TO3066"           // indicates when we're going to work around the TO3066 issue
 +
#define ZWN_LIMIT_NEIGHBORS            "LimitNeighbors"   // indicates when we figure manual routing, only consider Z-Wave's neighbors as valid options</pre>
  
// Variables
 
#define ZWN_LAST_UPDATE "LastUpdate"  // DEVICEDATA_LastUpdate_CONST
 
#define ZWN_AUTO_CONFIGURE "AutoConfigure"  // DEVICEDATA_Auto_Configure_CONST
 
#define ZWN_NET_STATUS_ID "NetStatusID" 
 
#define ZWN_NET_STATUS_TEXT "NetStatusText" 
 
#define ZWN_COM_PORT "ComPort"  // DEVICEDATA_COM_Port_on_PC_CONST
 
#define ZWN_NODE_ID "NodeID"  // The dongle's id
 
#define ZWN_VERSION_INFO "VersionInfo"
 
#define ZWN_HOME_ID "HomeID"
 
#define ZWN_ROLE "Role"
 
#define ZWN_RESET_MODE "ResetMode"
 
#define ZWN_INCLUSION_MODE "InclusionMode"
 
#define ZWN_NODETYPE "NodeType"
 
#define ZWN_TIMEOUT "Timeout"
 
#define ZWN_MULTIPLE "Multiple"
 
#define ZWN_SIMULATE_INCOMING "SimulateIncomingData"
 
#define ZWN_POLL_ENABLED "PollingEnabled"
 
#define ZWN_POLL_DELAY_INITIAL "PollDelayInitial"
 
#define ZWN_POLL_DELAY_DEADTIME "PollDelayDeadTime"
 
#define ZWN_POLL_MINDELAY "PollMinDelay"
 
#define ZWN_POLL_FREQUENCY "PollFrequency"
 
#define ZWN_LAST_ERROR "LastError"
 
  
// ============  ZWaveDevice ============
+
== ZWaveDevice ==
// Basic functionality for all ZWave devices
+
Basic functionality for all ZWave devices
  
#define ZWDEVICE_FILE "S_ZWaveDevice1.xml"
+
<pre>#define ZWDEVICE_FILE                   "S_ZWaveDevice1.xml"
#define ZWDEVICE_SID "urn:micasaverde-com:serviceId:ZWaveDevice1"
+
#define ZWDEVICE_SID                   "urn:micasaverde-com:serviceId:ZWaveDevice1"
#define ZWDEVICE_STYPE "urn:schemas-micasaverde-com:service:ZWaveDevice:1"
+
#define ZWDEVICE_STYPE                 "urn:schemas-micasaverde-com:service:ZWaveDevice:1"</pre>
  
// Variables
+
=== Variables ===
#define ZWD_LAST_UPDATE "LastUpdate"  // DEVICEDATA_LastUpdate_CONST
+
<pre>#define ZWD_POLL_SETTINGS               "PollSettings"     // DEVICEDATA_Polling_Settings_CONST
#define ZWD_AUTO_CONFIGURE "AutoConfigure"  // DEVICEDATA_Auto_Configure_CONST
+
#define ZWD_POLL_COMMANDS              "PollCommands"     // A comma-separated list of command classes/commands to poll.  X means the device won't respond to any poll
#define ZWD_POLL_SETTINGS "PollSettings" // DEVICEDATA_Polling_Settings_CONST
+
#define ZWD_MULTCH_ENDPOINT             "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define ZWD_REVERSE "ReverseOnOff" // DEVICEDATA_Reverse_CONST
+
#define ZWD_MULTCH_CAPABIL             "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
#define ZWD_MULTCH_ENDPOINT "MultiChEndpoint" // DEVICEDATA_Multi_Channel_End_Point_CONST
+
#define ZWD_MULTCH_CAPABIL "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
+
  
// ZWD_MULTCH_ENDPOINT string m_sMultiChannelList, // If m_cProtocolVersion>=2 (multi channel), then If this has embedded devices, Format: [number of end points] , [0/1 end points are dynamic], [0/1 end points are identical]
+
#define ZWD_NEIGHBORS                  "Neighbors"        // DEVICEDATA_Neighbors_to_Call_CONST
// If m_cProtocolVersion<2 (multi instance), then the total number of instances
+
#define ZWD_NEIGHBORS_INVERSE          "NeighborsInverse"  // Which neighbors see us
// ZWD_MULTCH_CAPABIL m_sMultiChannelCapability; // m_cProtocolVersion>=2, if this has devices, Format: [end point #], Generic device class, Specific device class, command class 1, command class 2.... \n repeat next end point
+
#define ZWD_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
// If m_cProtocolVersion<2, command class, # of instances \n repeat command class
+
#define ZWD_SECURITY_FAILED            "SecurityFailed"    // Don't talk to this node with security even if it reports it can
 +
#define ZWD_CONFIG                      "Configuration"    // DEVICEDATA_Configuration_CONST
 +
#define ZWD_LAST_RESET                  "LastReset"        // DEVICEDATA_Last_Reset_CONST
 +
#define ZWD_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
 +
#define ZWD_SCENES_TIMESTAMPS          "ScenesTimestamp"  // DEVICEDATA_Scenes_CONST
 +
#define ZWD_WAKEUP_INTERVAL            "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
 +
#define ZWD_LAST_WAKEUP                "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
 +
#define ZWD_LAST_ROUTE_UPD              "LastRouteUpdate"  // DEVICEDATA_Last_Route_Update_CONST
 +
#define ZWD_HEALTH                      "Health"            // A rating from 0-5
 +
#define ZWD_HEALTH_DATE                "HealthDate"        // The date the rating was assigned
 +
#define ZWD_VARIABLES_GET              "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
 +
#define ZWD_VARIABLES_SET              "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
 +
#define ZWD_ASSOCIATION_GET            "AssociationGet"    // DEVICEDATA_Association_Get_CONST
 +
#define ZWD_ASSOCIATION_SET            "AssociationSet"    // DEVICEDATA_Association_Set_CONST
 +
#define ZWD_ASSOCIATION_NUM            "AssociationNum"
 +
#define ZWD_NONCE_ACK                  "NonceACK"
 +
#define ZWD_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
 +
#define ZWD_VERSION_INFO                "VersionInfo"      // DEVICEDATA_Configuration_CONST
 +
#define ZWD_SETPOINT_INFO              "SetPointInfo"
 +
#define ZWD_NODE_INFO                  "NodeInfo"          // The Z-Wave node info frame
 +
#define ZWD_INITIAL_NAME                "InitialName"      // The name that was initially set when the node was first added
 +
#define ZWD_CONFIGURED_NAME            "ConfiguredName"    // The user-specified name when we configured the node. We won't need to set the name unless this has changed
 +
#define ZWD_CONFIGURED_VARIABLE        "ConfiguredVariable" // The user-specified VariablesSet when we configured the node.  We won't need to set the name unless this has changed
 +
#define ZWD_CONFIGURED_ASSOC            "ConfiguredAssoc"  // The user-specified AssociationSet when we configured the node. We won't need to set the name unless this has changed
 +
#define ZWD_DOCUMENTATION              "Documentation"    // For the Z-Wave options page
 +
#define ZWD_METER_TYPE                  "MeterType"
 +
#define ZWD_METER_SCALE                "MeterScale"
 +
#define ZWD_ALARM_TYPE                  "AlarmType"
 +
#define ZWD_POLL_OK                    "PollOk"
 +
#define ZWD_POLL_TX_FAIL                "PollTxFail"
 +
#define ZWD_POLL_NO_REPLY              "PollNoReply"
 +
#define ZWD_MANUAL_ROUTE                "ManualRoute"      // A route specified by an end-user
 +
#define ZWD_ALL_ROUTES_FAILED          "AllRoutesFailed"
 +
#define ZWD_AUTO_ROUTE                  "AutoRoute"        // A route chosen by profilings
 +
#define ZWD_IGNORE_DIRECT_SCENE        "IgnoreDirectScene" // See notes in IsSceneControllerEvent</pre>
  
#define ZWD_NEIGHBORS "Neighbors"  // DEVICEDATA_Neighbors_to_Call_CONST
+
== InsteonNetwork ==
#define ZWD_CAPABILITIES "Capabilities"  // DEVICEDATA_Capabilities_CONST
+
Basic functionality for all Insteon devices
#define ZWD_CONFIG "Configuration"  // DEVICEDATA_Configuration_CONST
+
#define ZWD_LAST_RESET "LastReset"  // DEVICEDATA_Last_Reset_CONST
+
#define ZWD_SCENES_AS_EVENTS "ScenesAsEvents"  // DEVICEDATA_Scenes_As_Events_CONST
+
#define ZWD_SCENES "Scenes"  // DEVICEDATA_Scenes_CONST
+
#define ZWD_WAKEUP_INTERVAL "WakeupInterval"  // DEVICEDATA_Wakeup_Interval_CONST
+
#define ZWD_PIN_CODES "PinCodes"  // DEVICEDATA_PIN_Codes_CONST
+
#define ZWD_BATTERY_LEVEL "BatteryLevel"  // DEVICEDATA_Battery_Level_CONST
+
#define ZWD_LAST_WAKEUP "LastWakeup"  // DEVICEDATA_Last_Wakeup_CONST
+
#define ZWD_LAST_ROUTE_UPD "LastRouteUpdate"  // DEVICEDATA_Last_Route_Update_CONST
+
#define ZWD_VARIABLES_GET "VariablesGet"  // DEVICEDATA_Variables_Get_CONST
+
#define ZWD_VARIABLES_SET "VariablesSet"  // DEVICEDATA_Variables_Set_CONST
+
#define ZWD_ASSOCIATION_GET "AssociationGet"  // DEVICEDATA_Association_Get_CONST
+
#define ZWD_ASSOCIATION_SET "AssociationSet"  // DEVICEDATA_Association_Set_CONST
+
#define ZWD_MANUF_INFO "ManufacturerInfo"  // DEVICEDATA_Model_CONST
+
#define ZWD_VERSION_INFO "VersionInfo"  // DEVICEDATA_Configuration_CONST
+
#define ZWD_UPDATED_NAME "UpdatedName"  // DEVICEDATA_Update_Name_CONST
+
  
// ============  Camera  ============
+
<pre>#define INN_FILE                        "S_InsteonNetwork1.xml"
// Basic functionality for all Cameras
+
#define INN_SID                        "urn:micasaverde-com:serviceId:InsteonNetwork1"
 +
#define INN_STYPE                      "urn:schemas-micasaverde-org:service:InsteonNetwork:1"</pre>
  
#define CAMDEVICE_FILE "S_Camera1.xml"
+
=== Actions ===
#define CAMDEVICE_SID "urn:micasaverde-com:serviceId:Camera1"
+
<pre>#define INN_RESET_NETWORK              "ResetNetwork"
#define CAMDEVICE_STYPE "urn:schemas-micasaverde-com:service:Camera:1"
+
#define INN_REMOVE_NODES                "RemoveNodes"
 +
#define INN_ADD_NODES                  "AddNodes"
 +
#define INN_STOP_ADDREM_NODES          "StopAddRemoveNodes"
 +
#define INN_SEND_DATA                  "SendData"</pre>
  
// Variables
+
=== Variables ===
#define CAM_USERNAME "Username" // DEVICEDATA_AuthUser_CONST
+
<pre>#define INN_COM_PORT                    "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define CAM_PASSWORD "Password"  // DEVICEDATA_AuthPassword_CONST
+
#define INN_LOCK_COM_PORT              "LockComPort"   
#define CAM_ARCHIVE_SETTINGS "ArchiveSettings// DEVICEDATA_Video_settings_CONST
+
#define INN_LAST_ERROR                  "LastError"
#define CAM_RELATED_DEVICES "RelatedDevices"  // DEVICEDATA_sDevice_Num_Relations_For_Creat_CONST
+
#define INN_LAST_UPDATE                "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define CAM_URL "URL" // DEVICEDATA_Path_CONST
+
#define INN_NET_STATUS_ID              "NetStatusID"   
 +
#define INN_NET_STATUS_TEXT            "NetStatusText"   
 +
#define INN_POLL_ENABLED                "PollingEnabled"
 +
#define INN_POLL_DELAY_INITIAL          "PollDelayInitial"
 +
#define INN_POLL_DELAY_DEADTIME        "PollDelayDeadTime"
 +
#define INN_POLL_MINDELAY              "PollMinDelay"
 +
#define INN_POLL_FREQUENCY              "PollFrequency"
 +
#define INN_NODE_ID                    "NodeID"            // The dongle's id
 +
#define INN_SL_X10_CODE                "sl_X10Code"</pre>
  
// ============  PanTiltZoom  ============
 
// For Cameras
 
  
#define PTZ_FILE "S_PanTiltZoom1.xml"
+
== InsteonDevice ==
#define PTZ_SID "urn:micasaverde-com:serviceId:PanTiltZoom1"
+
Basic functionality for all Insteon devices
#define PTZ_STYPE "urn:schemas-micasaverde-com:service:PanTiltZoom:1"
+
  
// Actions
+
<pre>#define INDEVICE_FILE                  "S_InsteonDevice1.xml"
#define PTZ_LEFT "MoveLeft"
+
#define INDEVICE_SID                    "urn:micasaverde-com:serviceId:InsteonDevice1"
#define PTZ_RIGHT "MoveRight"
+
#define INDEVICE_STYPE                  "urn:schemas-micasaverde-com:service:InsteonDevice:1"</pre>
#define PTZ_UP "MoveUp"
+
#define PTZ_DOWN "MoveDown"
+
#define PTZ_IN "ZoomIn"
+
#define PTZ_OUT "ZoomOut"
+
  
// ============  SwitchPower1  ============
+
=== Variables ===
#define SWP_SID "urn:upnp-org:serviceId:SwitchPower1"
+
<pre>#define IND_POLL_SETTINGS              "PollSettings"     // DEVICEDATA_Polling_Settings_CONST
 +
#define IND_MULTCH_ENDPOINT            "MultiChEndpoint"  // DEVICEDATA_Multi_Channel_End_Point_CONST
 +
#define IND_MULTCH_CAPABIL              "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
  
// Actions
+
#define IND_NEIGHBORS                  "Neighbors"        // DEVICEDATA_Neighbors_to_Call_CONST
#define SWP_SET_TARGET "SetTarget"  
+
#define IND_CAPABILITIES                "Capabilities"     // DEVICEDATA_Capabilities_CONST
 +
#define IND_CONFIG                      "Configuration"    // DEVICEDATA_Configuration_CONST
 +
#define IND_LAST_RESET                  "LastReset"        // DEVICEDATA_Last_Reset_CONST
 +
#define IND_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
 +
#define IND_WAKEUP_INTERVAL            "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
 +
#define IND_LAST_WAKEUP                "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
 +
#define IND_LAST_ROUTE_UPD              "LastRouteUpdate"  // DEVICEDATA_Last_Route_Update_CONST
 +
#define IND_VARIABLES_GET              "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
 +
#define IND_VARIABLES_SET              "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
 +
#define IND_ASSOCIATION_GET            "AssociationGet"    // DEVICEDATA_Association_Get_CONST
 +
#define IND_ASSOCIATION_SET            "AssociationSet"    // DEVICEDATA_Association_Set_CONST
 +
#define IND_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
 +
#define IND_VERSION_INFO                "VersionInfo"      // DEVICEDATA_Configuration_CONST
 +
#define IND_UPDATED_NAME                "UpdatedName"      // DEVICEDATA_Update_Name_CONST</pre>
  
// Variables
 
#define SWP_STATUS "Status"
 
#define SWP_TARGET "Target"
 
  
// ============  Dimming1  ============
+
== USB UIRT ==
#define SWD_SID "urn:upnp-org:serviceId:Dimming1"
+
Basic functionality for USB UIRT
  
// Actions
+
<pre>#define UIRT_FILE                      "S_USBUIRT.xml"
#define SWD_SET_LOAD_LEVEL "SetLoadLevelTarget"  
+
#define UIRT_SID                        "urn:micasaverde-com:serviceId:USBUIRT1"
 +
#define UIRT_TYPE                      "urn:schemas-micasaverde-com:service:USBUIRT:1"</pre>
  
// Variables
+
=== Variables ===
#define SWD_LOAD_LEVEL_STATUS "LoadLevelStatus"
+
<pre>#define UIRT_COM_PORT                  "ComPort"</pre>
#define SWD_LOAD_LEVEL_TARGET "LoadLevelTarget"
+
  
// ============  DoorLock1  ============
 
#define DL_SID "urn:micasaverde-com:serviceId:DoorLock1"
 
  
// Actions
+
== Camera ==
#define DL_SET_TARGET "SetTarget"
+
Basic functionality for all Cameras
#define DL_SET_PIN "SetPin"
+
#define DL_CLEAR_PIN "ClearPin"
+
  
// Variables
+
<pre>#define CAMDEVICE_FILE                  "S_Camera1.xml"
#define DL_STATUS "Status"  
+
#define CAMDEVICE_SID                  "urn:micasaverde-com:serviceId:Camera1"
#define DL_TARGET "Target"  
+
#define CAMDEVICE_STYPE                "urn:schemas-micasaverde-com:service:Camera:1"</pre>
#define DL_SL_USER_CODE "sl_UserCode"
+
#define DL_SL_PIN_FAILED "sl_PinFailed"
+
  
// ============  HVAC_UserOperatingMode1  ============
+
=== Variables ===
#define HVACO_SID "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"
+
<pre>#define CAM_USERNAME                    "Username"         // DEVICEDATA_AuthUser_CONST
 +
#define CAM_PASSWORD                    "Password"          // DEVICEDATA_AuthPassword_CONST
  
// Actions
+
#define CAM_RELATED_SENSORS            "RelatedSensors"    // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
#define HVACO_SET_MODE "SetModeTarget"   
+
#define CAM_SENSOR_ARCHIVE_SEC          "SensorArchiveSeconds" // Integer: And after the sensor(s) are tripped archive the video for seconds.
 +
#define CAM_RELATED_LIGHTS              "RelatedLights"    // Comma separated list: Which lights should be turned on when viewing this camera:
 +
#define CAM_LIGHT_OPTIONS              "LightOptions"      // V=When I view the camera from the web or phone.
 +
                                                            // S=When the sensor(s) above are tripped and they are armed
 +
                                                            // B=When the sensors above are tripped and they are *not* armed
 +
                                                            // A=When you take an automatic picture for the archive
 +
                                                            // So: VSBA means do them all
  
// Variables
+
#define CAM_AUTO_ARCH_SEC              "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds
#define HVACO_STATUS "ModeStatus"
+
#define CAM_AUTO_PRES_DAYS              "AutoArchivePreserveDays" // and keep the pictures x days
 +
#define CAM_URL                        "URL"              // DEVICEDATA_Path_CONST
 +
#define CAM_DIRECT_URL                  "DirectStreamingURL"
 +
#define CAM_TIMEOUT                    "Timeout"</pre>
  
// ============  HVAC_FanOperatingMode1  ============
 
#define HVACF_SID "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"
 
  
// Actions
+
== PanTiltZoom ==
#define HVACF_SET_MODE "SetMode" 
+
For Cameras
  
// Variables
+
<pre>#define PTZ_FILE                        "S_PanTiltZoom1.xml"
#define HVACF_STATUS "ModeStatus"
+
#define PTZ_SID                        "urn:micasaverde-com:serviceId:PanTiltZoom1"
 +
#define PTZ_STYPE                      "urn:schemas-micasaverde-com:service:PanTiltZoom:1"</pre>
  
 +
=== Actions ===
 +
<pre>#define PTZ_LEFT                        "MoveLeft"
 +
#define PTZ_RIGHT                      "MoveRight"
 +
#define PTZ_UP                          "MoveUp"
 +
#define PTZ_DOWN                        "MoveDown"
 +
#define PTZ_IN                          "ZoomIn"
 +
#define PTZ_OUT                        "ZoomOut"</pre>
  
// ============  TemperatureSetpoint1_Heat/Cool  ============
 
#define HVACHEAT_SID "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
 
#define HVACCOOL_SID "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"
 
  
// Variables
+
== SwitchPower1 ==
#define HVACHC_SETPOINT "SetCurrentSetpoint"
+
<pre>#define SWP_SID                        "urn:upnp-org:serviceId:SwitchPower1"</pre>
  
// Variables
+
=== Actions ===
#define HVACHC_CURRENTSP "CurrentSetpoint"
+
<pre>#define SWP_SET_TARGET                  "SetTarget"</pre>
  
// ============  TemperatureSensor1  ============
+
=== Variables ===
#define TEMP_SID "urn:upnp-org:serviceId:TemperatureSensor1"
+
<pre>#define SWP_STATUS                      "Status"  
 +
#define SWP_TARGET                      "Target"</pre>
  
// Variables
 
#define TEMP_CURRENT "CurrentTemperature"
 
  
// ============  LightSensor1  ============
+
== S_WindowCovering1 ==
#define LIGHT_SID "urn:micasaverde-com:serviceId:LightSensor1"
+
<pre>#define WC_SID                          "urn:upnp-org:serviceId:WindowCovering1"</pre>
  
// Variables
+
=== Actions ===
#define LIGHT_CURRENT "CurrentLevel"
+
<pre>#define WC_UP                          "Up"
 +
#define WC_DOWN                        "Down"
 +
#define WC_STOP                        "Stop"</pre>
  
// ============  HumiditySensor1  ============
+
=== Variables ===
#define HUM_SID "urn:micasaverde-com:serviceId:HumiditySensor1"
+
<pre>#define WC_STATUS                      "Status"
 +
#define WC_TARGET                      "Target"</pre>
  
// Variables
 
#define HUM_CURRENT "CurrentLevel"
 
  
// ============  MotionSensor1  ============
+
== Dimming1 ==
#define MOT_SID "urn:micasaverde-com:serviceId:MotionSensor1"
+
<pre>#define SWD_SID                        "urn:upnp-org:serviceId:Dimming1"</pre>
  
// Variables
+
=== Actions ===
#define MOT_ARMED "Armed"
+
<pre>#define SWD_SET_LOAD_LEVEL              "SetLoadLevelTarget"</pre>
#define MOT_TRIPPED "Tripped"
+
  
// ============  EnergyMetering1  ============
+
=== Variables ===
#define ENE_SID "urn:micasaverde-com:serviceId:EnergyMetering1"
+
<pre>#define SWD_LOAD_LEVEL_STATUS          "LoadLevelStatus"
 +
#define SWD_LOAD_LEVEL_TARGET          "LoadLevelTarget"</pre>
  
// Variables
 
#define ENE_KWH "KWH"
 
#define ENE_WATT "Watt"
 
#define ENE_ACTUAL "ActualUsage"
 
#define ENE_USER_SUPPLIED "UserSuppliedWattage"
 
  
// ============  IrTransmitter1  ============
+
== DoorLock1 ==
#define IRT_SID "urn:micasaverde-com:serviceId:IrTransmitter1"
+
<pre>#define DL_SID                          "urn:micasaverde-com:serviceId:DoorLock1"</pre>
  
// Variables
+
=== Actions ===
#define IRT_SENDPRONTO "SendProntoCode"
+
<pre>#define DL_SET_TARGET                  "SetTarget"
 +
#define DL_SET_PIN                      "SetPin"
 +
#define DL_CLEAR_PIN                    "ClearPin"
 +
#define DL_SET_PIN_DATE                "SetPinValidityDate"
 +
#define DL_SET_PIN_WEEK                "SetPinValidityWeekly"
 +
#define DL_CLEAR_PIN_VALID              "ClearPinValidity"</pre>
  
 +
=== Variables ===
 +
<pre>#define DL_STATUS                      "Status"
 +
#define DL_TARGET                      "Target"
 +
#define DL_MIN_PIN_SIZE                "MinPinSize"
 +
#define DL_MAX_PIN_SIZE                "MaxPinSize"
 +
#define DL_KEEP_PIN_CODES              "KeepPinCodes"
 +
#define DL_SL_USER_CODE                "sl_UserCode"
 +
#define DL_SL_PIN_FAILED                "sl_PinFailed"
 +
#define DL_SL_LOCK_BUTTON              "sl_LockButton"
 +
#define DL_SL_LOCK_FAILURE              "sl_LockFailure"
 +
#define DL_SL_UNAUTH_USER              "sl_UnauthUser"
 +
#define DL_SL_LOW_BATTERY              "sl_LowBattery"
 +
#define DL_SL_VERY_LOW_BATTERY          "sl_VeryLowBattery"
 +
#define DL_SL_CODE_CHANGED              "sl_CodeChanged"
  
// ============  SerialPort1  ============
+
#define DL_PIN_CODES                    "PinCodes"      // DEVICEDATA_PIN_Codes_CONST
#define SPT_SID "urn:micasaverde-org:serviceId:SerialPort1"
+
#define DL_NUM_SCHEDULES                "NumSchedules" // DEVICEDATA_PIN_Codes_CONST</pre>
  
// Variables
 
#define SPT_BAUD "baud"
 
  
// ============  SceneController1  ============
+
== HVAC_UserOperatingMode1 ==
#define SCR_SID "urn:micasaverde-com:serviceId:SceneController1"
+
<pre>#define HVACO_SID                      "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"</pre>
  
// Variables
+
=== Actions ===
#define SCR_SL_BUTTON_PRESSED "sl_SceneButtonPressed"
+
<pre>#define HVACO_SET_MODE                  "SetModeTarget"</pre>
  
#endif
+
=== Variables ===
 +
<pre>#define HVACO_TARGET                    "ModeTarget"
 +
#define HVACO_STATUS                    "ModeStatus"
 +
#define HVACO_SUPPORTED                "SupportedType"</pre>
 +
 
 +
== HVAC_OperatingState1 ==
 +
<pre>#define HVACS_SID                      "urn:micasaverde-com:serviceId:HVAC_OperatingState1"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define HVACS_STATE                    "ModeState"
 +
#define HVACS_STATE_ENERGY              "ModeStateForEnergy"</pre>
 +
 
 +
 
 +
== HVAC_FanOperatingMode1 ==
 +
<pre>#define HVACF_SID                      "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"</pre>
 +
 
 +
=== Actions ===
 +
<pre>#define HVACF_SET_MODE                  "SetMode"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define HVACF_STATUS                    "Mode"</pre>
 +
 
 +
 
 +
== TemperatureSetpoint1_Heat/Cool ==
 +
<pre>#define HVACHEAT_SID                    "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
 +
#define HVACCOOL_SID                    "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"</pre>
 +
 
 +
=== Actions ===
 +
<pre>#define HVACHC_SETPOINT                "SetCurrentSetpoint"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define HVACHC_CURRENTSP                "CurrentSetpoint"
 +
#define HVACHC_SETPOINT_TARGET          "SetpointTarget"</pre>
 +
 
 +
 
 +
== TemperatureSensor1 ==
 +
<pre>#define TEMP_SID                        "urn:upnp-org:serviceId:TemperatureSensor1"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define TEMP_CURRENT                    "CurrentTemperature"</pre>
 +
 
 +
 
 +
== LightSensor1 ==
 +
<pre>#define LIGHT_SID                      "urn:micasaverde-com:serviceId:LightSensor1"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define LIGHT_CURRENT                  "CurrentLevel"</pre>
 +
 
 +
 
 +
== HumiditySensor1 ==
 +
<pre>#define HUM_SID                        "urn:micasaverde-com:serviceId:HumiditySensor1"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define HUM_CURRENT                    "CurrentLevel"</pre>
 +
 
 +
 
 +
== SecuritySensor1 ==
 +
<pre>#define SES_SID                        "urn:micasaverde-com:serviceId:SecuritySensor1"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define SES_ARMED                      "Armed"
 +
#define SES_TRIPPED                    "Tripped"
 +
#define SES_LAST_TRIP                  "LastTrip"</pre>
 +
 
 +
=== Action ===
 +
<pre>#define SES_SET_ARMED                  "SetArmed"</pre>
 +
 
 +
 
 +
== EnergyMetering1 ==
 +
<pre>#define ENE_SID                        "urn:micasaverde-com:serviceId:EnergyMetering1"</pre>
 +
 
 +
=== Actions ===
 +
<pre>#define ENE_RESETKWH                    "ResetKWH"      // Reset Kwh</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define ENE_KWH                        "KWH"
 +
#define ENE_KWH_READING                "KWHReading"    // The time it was last read
 +
#define ENE_KVARH                      "kVARh"
 +
#define ENE_KVAR                        "kVAR"
 +
#define ENE_WATTS                      "Watts"
 +
#define ENE_PULSE                      "Pulse"
 +
#define ENE_ACTUAL                      "ActualUsage"
 +
#define ENE_USER_SUPPLIED              "UserSuppliedWattage"
 +
#define ENE_WHOLE_HOUSE                "WholeHouse"
 +
#define ENE_LOG                        "Log"</pre>
 +
 
 +
 
 +
== IrTransmitter1 ==
 +
<pre>#define IRT_SID                        "urn:micasaverde-com:serviceId:IrTransmitter1"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define IRT_SENDPRONTO                  "SendProntoCode"</pre>
 +
 
 +
 
 +
== SerialPort1 ==
 +
<pre>#define SPT_SID                        "urn:micasaverde-org:serviceId:SerialPort1"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define SPT_BAUD                        "baud"
 +
#define SPT_VENDOR                      "vendor"
 +
#define SPT_PRODUCT                    "product"
 +
#define SPT_PATH                        "path"</pre>
 +
 
 +
 
 +
== SceneController1 ==
 +
<pre>#define SCR_SID                        "urn:micasaverde-com:serviceId:SceneController1"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define SCR_SL_SCENE_ACTIVATED          "sl_SceneActivated"
 +
#define SCR_SL_SCENE_DEACTIVATED        "sl_SceneDeactivated"
 +
#define SCR_SCENES                      "Scenes"
 +
#define SCR_LAST_SCENE_ID              "LastSceneID"
 +
#define SCR_LAST_SCENE_TIME            "LastSceneTime"
 +
#define SCR_MANAGE_LEDS                "ManageLeds"
 +
#define SCR_NUM_BUTTONS                "NumButtons"
 +
#define SCR_FIRES_OFF_EVENTS            "FiresOffEvents"
 +
#define SCR_SCENE_SHORTCUTS            "SceneShortcuts"
 +
#define SCR_ACTIVATION_METHOD          "ActivationMethod"  // 1=BASIC_SET only (ignore scene_activate) 2=SCENE_ACTIVATE only (ignore basic set).  0=anything goes</pre>
 +
 
 +
 
 +
== SceneControllerLED1 ==
 +
<pre>#define SCL_SID                        "urn:micasaverde-com:serviceId:SceneControllerLED1"</pre>
 +
 
 +
=== Actions ===
 +
<pre>#define SCL_SET_LIGHT                  "SetLight"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define SCL_LIGHT_SETTINGS              "LightSettings"</pre>
 +
 
 +
 
 +
== GenericIO ==
 +
<pre>#define GIO_SID                        "urn:micasaverde-com:serviceId:GenericIO"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define GIO_IS_INPUT                    "IsInput"          // DEVICEDATA_InputOrOutput_CONST, 1 if it's input
 +
#define GIO_DEFAULT_STATE              "DefaultState"      // DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed</pre>
 +
 
 +
 
 +
== IR ==
 +
<pre>#define IR_SID                          "urn:micasaverde-com:serviceId:IrDevice1"</pre>
 +
 
 +
=== Actions ===
 +
<pre>#define IR_SEND_CODE                    "SendCode"</pre>
 +
 
 +
=== Variables ===
 +
<pre>#define IR_CODESETS                    "Codesets"
 +
#define IR_CODESET                      "Codeset"
 +
#define IR_REMOTE                      "Remote"
 +
#define IR_MFRID                        "MfrId"</pre>

Latest revision as of 10:37, 5 January 2016

The following is the contents of the file Constants.h which defines the strings used for file device types, services, actions, variables, etc.

/*
Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation 
All rights reserved. This software may not be used or distributed without express consent.
*/


Contents

[edit] Device Types

#define DEVICETYPE_HOME_AUTO_GATEWAY    "urn:schemas-micasaverde-com:device:HomeAutomationGateway:1"
#define DEVICETYPE_BINARY_LIGHT         "urn:schemas-upnp-org:device:BinaryLight:1"
#define DEVICETYPE_DIMMABLE_LIGHT       "urn:schemas-upnp-org:device:DimmableLight:1"
#define DEVICETYPE_THERMOSTAT           "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
#define DEVICETYPE_HEATER               "urn:schemas-upnp-org:device:Heater:1"
#define DEVICETYPE_HUMIDITY_SENSOR      "urn:schemas-micasaverde-com:device:HumiditySensor:1"
#define DEVICETYPE_MULTI_IO             "urn:schemas-micasaverde-com:device:MultiIO:1"
#define DEVICETYPE_DOOR_LOCK            "urn:schemas-micasaverde-com:device:DoorLock:1"
#define DEVICETYPE_DOOR_SENSOR          "urn:schemas-micasaverde-com:device:DoorSensor:1"
#define DEVICETYPE_ZWAVE_NETWORK        "urn:schemas-micasaverde-com:device:ZWaveNetwork:1"
#define DEVICETYPE_ZIGBEE_NETWORK       "urn:schemas-micasaverde-com:device:ZigbeeNetwork:1"
#define DEVICETYPE_INSTEON_NETWORK      "urn:schemas-micasaverde-com:device:InsteonNetwork:1"
#define DEVICETYPE_USB_UIRT             "urn:schemas-micasaverde-com:device:USBUIRT:1"
#define DEVICETYPE_TEMPERATURE_SENSOR   "urn:schemas-micasaverde-com:device:TemperatureSensor:1"
#define DEVICETYPE_POWER_METER          "urn:schemas-micasaverde-com:device:PowerMeter:1"
#define DEVICETYPE_MOTION_SENSOR        "urn:schemas-micasaverde-com:device:MotionSensor:1"
#define DEVICETYPE_SMOKE_SENSOR         "urn:schemas-micasaverde-com:device:SmokeSensor:1"
#define DEVICETYPE_GENERIC_SENSOR       "urn:schemas-micasaverde-com:device:GenericSensor:1"
#define DEVICETYPE_LIGHT_SENSOR         "urn:schemas-micasaverde-com:device:LightSensor:1"
#define DEVICETYPE_IR_TRANSMITTER       "urn:schemas-micasaverde-com:device:IrTransmitter:1"
#define DEVICETYPE_WINDOW_COVERING      "urn:schemas-micasaverde-com:device:WindowCovering:1"
#define DEVICETYPE_GENERIC_IO           "urn:schemas-micasaverde-com:device:GenericIO:1"
#define DEVICETYPE_REMOTE_CONTROL       "urn:schemas-micasaverde-com:device:RemoteControl:1"
#define DEVICETYPE_COMBO_DEVICE         "urn:schemas-micasaverde-com:device:ComboDevice:1"
#define DEVICETYPE_CAMERA               "urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
#define DEVICETYPE_CAMERA2              "urn:schemas-upnp-org:device:DigitalSecurityCamera:2"
#define DEVICETYPE_SERIALPORT           "urn:micasaverde-org:device:SerialPort:1"
#define DEVICETYPE_SERIALPORTROOT       "urn:micasaverde-org:device:SerialPortRoot:1"
#define DEVICETYPE_SCENE_CONTROLLER     "urn:schemas-micasaverde-com:device:SceneController:1"
#define DEVICETYPE_SCENE_CONTR_LED      "urn:schemas-micasaverde-com:device:SceneControllerLED:1"
#define DEVICETYPE_ENERGY_CALCULATOR    "urn:schemas-micasaverde-com:device:EnergyCalculator:1"
#define DEVICETYPE_TEMP_LEAK_SENSOR     "urn:schemas-micasaverde-com:device:TempLeakSensor:1"
#define DEVICETYPE_RELAY                "urn:schemas-micasaverde-com:device:Relay:1"
#define DEVICETYPE_ALARMPANEL           "urn:schemas-micasaverde-com:device:AlarmPanel:1"
#define DEVICETYPE_ALARMPARTITION1      "urn:schemas-micasaverde-com:device:AlarmPartition:1"
#define DEVICETYPE_ALARMPARTITION2      "urn:schemas-micasaverde-com:device:AlarmPartition:2"
#define DEVICETYPE_SIREN                "urn:schemas-micasaverde-com:device:Siren:1"
#define DEVICETYPE_FLOOD_SENSOR         "urn:schemas-micasaverde-com:device:FloodSensor:1"

#define DEVICETYPE_SCENE                "urn:schemas-micasaverde-com:device:Scene:1"

[edit] IR Device Types

#define DEVICETYPE_IR                   "urn:schemas-micasaverde-com:device:IrDevice:1"
#define DEVICETYPE_TV                   "urn:schemas-micasaverde-com:device:tv:1"
#define DEVICETYPE_CABLE                "urn:schemas-micasaverde-com:device:cable:1"
#define DEVICETYPE_SATELLITE            "urn:schemas-micasaverde-com:device:satellite:1"
#define DEVICETYPE_VIDEO_ACCESSORY      "urn:schemas-micasaverde-com:device:videoaccessory:1"
#define DEVICETYPE_VCR_DVR              "urn:schemas-micasaverde-com:device:vcrdvd:1"
#define DEVICETYPE_DVD_BLURAY           "urn:schemas-micasaverde-com:device:dvdbluray:1"
#define DEVICETYPE_RECEIVER             "urn:schemas-micasaverde-com:device:receiver:1"
#define DEVICETYPE_AMP                  "urn:schemas-micasaverde-com:device:amp:1"
#define DEVICETYPE_CD                   "urn:schemas-micasaverde-com:device:cd:1"
#define DEVICETYPE_MISC_HOME_CONTROL    "urn:schemas-micasaverde-com:device:mischomecontrol:1"
#define DEVICETYPE_AV_MISC              "urn:schemas-micasaverde-com:device:avmisc:1"
#define DEVICETYPE_VIRTUAL_DEVICE       "urn:schemas-micasaverde-com:device:VirtualDevice:1"

[edit] Device Files

#define DEVICEFILE_BINARY_LIGHT         "D_BinaryLight1.xml"
#define DEVICEFILE_DIMMABLE_LIGHT       "D_DimmableLight1.xml"
#define DEVICEFILE_THERMOSTAT           "D_HVAC_ZoneThermostat1.xml"
#define DEVICEFILE_HEATER               "D_Heater1.xml"
#define DEVICEFILE_HUMIDITY_SENSOR      "D_HumiditySensor1.xml"
#define DEVICEFILE_MULTI_IO             "D_GC100.xml"
#define DEVICEFILE_DOOR_LOCK            "D_DoorLock1.xml"
#define DEVICEFILE_DOOR_SENSOR          "D_DoorSensor1.xml"
#define DEVICEFILE_ZWAVE_NETWORK        "D_ZWaveNetwork.xml"
#define DEVICEFILE_INSTEON_NETWORK      "D_InsteonNetwork.xml"
#define DEVICEFILE_USB_UIRT             "D_USB_UIRT.xml"
#define DEVICEFILE_TEMPERATURE_SENSOR   "D_TemperatureSensor1.xml"
#define DEVICEFILE_POWER_METER          "D_PowerMeter1.xml"
#define DEVICEFILE_MOTION_SENSOR        "D_MotionSensor1.xml"
#define DEVICEFILE_SMOKE_SENSOR         "D_SmokeSensor1.xml"
#define DEVICEFILE_GENERIC_SENSOR       "D_GenericSensor1.xml"
#define DEVICEFILE_LIGHT_SENSOR         "D_LightSensor1.xml"
#define DEVICEFILE_IR_TRANSMITTER       "D_IrTransmitter1.xml"
#define DEVICEFILE_IR_DEVICE            "D_IrDevice1.xml"
#define DEVICEFILE_WINDOW_COVERING      "D_WindowCovering1.xml"
#define DEVICEFILE_SERIAL_PORT_ROOT     "D_SerialPortRoot1.xml"
#define DEVICEFILE_GENERIC_IO           "D_GenericIO1.xml"
#define DEVICEFILE_REMOTE_CONTROL       "D_RemoteControl1.xml"
#define DEVICEFILE_COMBO_DEVICE         "D_ComboDevice1.xml"
#define DEVICEFILE_CAMERA               "D_DigitalSecurityCamera1.xml"
#define DEVICEFILE_SCENE_CONTROLLER     "D_SceneController1.xml"
#define DEVICEFILE_SCENE_CONTR_LED      "D_SceneControllerLED1.xml"
#define DEVICEFILE_ENERGY_CALCULATOR    "D_EnergyCalculator1.xml"
#define DEVICEFILE_AV_MISC              "D_AvMisc1.xml"
#define DEVICEFILE_TEMP_LEAK_SENSOR     "D_TempLeakSensor1.xml"
#define DEVICEFILE_RELAY                "D_Relay1.xml"
#define DEVICEFILE_SIREN                "D_Siren1.xml"
#define DEVICEFILE_FLOOD_SENSOR         "D_FloodSensor1.xml"

#define DEVICEFILE_AV_SCENE             "D_Scene1.xml"

[edit] Device Categories

See Luup Device Categories.

[edit] HaGateway

Basic functionality for the gateway itself

#define HAGEVICE_FILE                   "S_HomeAutomationGateway1.xml"
#define HAGEVICE_SID                    "urn:micasaverde-com:serviceId:HomeAutomationGateway1"
#define HAGEVICE_STYPE                  "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"

[edit] Variables

#define HAG_ACTIVE_SCENES               "ActiveScenes"
#define HAG_DATAVERSION_USERDATA        "DataVersionUserData" // The current data version for user_data
#define HAG_DATAVERSION_STATUS          "DataVersionStatus" // The current data version for lu_status

[edit] Actions

#define HAG_GET_USER_DATA		"GetUserData"  
#define HAG_MODIFY_USER_DATA		"ModifyUserData" 
#define HAG_MODIFY_GET_VARIABLE		"GetVariable" 
#define HAG_MODIFY_SET_VARIABLE		"SetVariable" 
#define HAG_MODIFY_GET_STATUS		"GetStatus" 
#define HAG_MODIFY_GET_ACTIONS		"GetActions" 
#define HAG_MODIFY_CREATE_DEVICE	"CreateDevice" 
#define HAG_MODIFY_DELETE_DEVICE	"DeleteDevice" 
#define HAG_MODIFY_CREATE_PLUGIN	"CreatePlugin" 
#define HAG_MODIFY_DELETE_PLUGIN	"DeletePlugin" 
#define HAG_MODIFY_CREATE_PLUGIN_DEVICE	"CreatePluginDevice" 
#define HAG_IMPORT_UPNP_DEVICE		"ImportUpnpDevice" 
#define HAG_PROCESS_CHILD		"ProcessChildDevices" 
#define HAG_RELOAD			"Reload" 
#define HAG_RUN_SCENE			"RunScene"
#define HAG_SCENE_OFF			"SceneOff"
#define HAG_RUN_LUA			"RunLua"
#define HAG_LOG_IP_REQUEST		"LogIpRequest"

[edit] HaDevice

Basic functionality for all home automation devices

#define HADEVICE_FILE                   "S_HaDevice1.xml"
#define HADEVICE_SID                    "urn:micasaverde-com:serviceId:HaDevice1"
#define HADEVICE_STYPE                  "urn:schemas-micasaverde-com:service:HaDevice:1"

[edit] Variables

#define HAD_ENERGY_LOG                  "EnergyLog"         // DEVICEDATA_Energy_Log_CONST
#define HAD_IOPORT_DEVICE               "IODevice"          // The device number to connect to for IO (this is on the master device)
#define HAD_IOPORT_DEVICE_XREF          "IODeviceXRef"      // On the port, this is the device number that connects to it
#define HAD_IOPORT_MAX_TIME             "MaxTime"           // The maximum time to leave the socket open before closing and re-opening
#define HAD_IOPORT_PORT                 "IOPort"            // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
#define HAD_IOPORT_PATH                 "IOPortPath"        // Read-only, created at each boot, has the current path to the port
#define HAD_IGNORE_ROOM                 "IgnoreRoom"        // DEVICEDATA_Room_Not_Required_CONST
#define HAD_COMM_FAILURE                "CommFailure"
#define HAD_POLLING_ENABLED             "PollingEnabled"
#define HAD_POLL_MIN_DELAY              "PollMinDelay"
#define HAD_CONFIGURED                  "Configured"
#define HAD_JOBID                       "JobID"
#define HAD_REVERSE                     "ReverseOnOff"      // DEVICEDATA_Reverse_CONST
#define HAD_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define HAD_LAST_ACTIVITY               "LastActivity"      // Used by the OPower plugin
#define HAD_AUTO_CONFIGURE              "AutoConfigure"     // DEVICEDATA_Auto_Configure_CONST
#define HAD_LAST_TIME_CHECK             "LastTimeCheck"     // Only for devices that are capable of implementing time this is when the time was last checked
#define HAD_LAST_TIME_OFFSET            "LastTimeOffset"    // For HAD_LAST_TIME_CHECK this is the timezone offset from UTC when the time was last checked
#define HAD_FIRST_CONFIGURED            "FirstConfigured"   // The date this was first configured
#define HAD_BATTERY_LEVEL               "BatteryLevel"      // DEVICEDATA_Battery_Level_CONST
#define HAD_BATTERY_DATE                "BatteryDate"       // The date when the battery level was reported
#define HAD_BATTERY_ALARM               "BatteryAlarm"      // DEVICEDATA_Battery_Alarm_CONST
#define HAD_DOCUMENTATION               "Documentation"  
#define HAD_ALARM                       "sl_Alarm"

[edit] Actions

#define HAD_RECONFIGURE                 "Reconfigure"
#define HAD_REMOVE                      "Remove"
#define HAD_POLL                        "Poll"
#define HAD_SET_POLL_FREQUENCY          "SetPollFrequency"
#define HAD_STRESS_TEST                 "StressTest"
#define HAD_TOGGLE_STATE                "ToggleState"


[edit] ZWaveNetwork

Basic functionality for all ZWave devices

#define ZWN_FILE                        "S_ZWaveNetwork1.xml"
#define ZWN_SID                         "urn:micasaverde-com:serviceId:ZWaveNetwork1"
#define ZWN_STYPE                       "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"

#define ZWN_RESET_NETWORK               "ResetNetwork"
#define ZWN_RECONFIGURE_ALL             "ReconfigureAllNodes"
#define ZWN_REMOVE_NODES                "RemoveNodes"
#define ZWN_ADD_NODES                   "AddNodes"
#define ZWN_DOWNLOAD                    "DownloadNetwork"
#define ZWN_HEAL_NETWORK                "HealNetwork"
#define ZWN_UPDATE_NETWORK              "UpdateNetwork"
#define ZWN_UPDATE_NEIGHBORS            "UpdateNeighbors"
#define ZWN_SET_POLLING                 "SetPolling"
#define ZWN_SEND_DATA                   "SendData"
#define ZWN_POLL_ALL_NODES              "PollAllNodes"
#define ZWN_SOFT_RESET                  "SoftReset"
#define ZWN_BACKUP_DONGLE               "BackupDongle"
#define ZWN_SCENE_IDS                   "SceneIDs"          // For scene controllers, node#-button#=ZWaveSceneID,...
#define ZWN_PUT_BYTE                    "PutByte"

[edit] Variables

#define ZWN_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_HEAL                   "LastHeal"          // DEVICEDATA_LastUpdate_CONST
#define ZWN_ROUTE_FAILURE               "LastRouteFailure"  // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_DONGLE_BACKUP          "LastDongleBackup"
#define ZWN_NET_STATUS_ID               "NetStatusID"  
#define ZWN_NET_STATUS_TEXT             "NetStatusText"  
#define ZWN_COM_PORT                    "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define ZWN_LOCK_COM_PORT               "LockComPort"  
#define ZWN_NODE_ID                     "NodeID"            // The dongle's id
#define ZWN_VERSION_INFO                "VersionInfo"
#define ZWN_HOME_ID                     "HomeID"
#define ZWN_ROLE                        "Role"
#define ZWN_RESET_MODE                  "ResetMode"
#define ZWN_INCLUSION_MODE              "InclusionMode"
#define ZWN_NODETYPE                    "NodeType"
#define ZWN_TIMEOUT                     "Timeout"
#define ZWN_MULTIPLE                    "Multiple"
#define ZWN_SIMULATE_INCOMING           "SimulateIncomingData"
#define ZWN_POLL_ENABLED                "PollingEnabled"
#define ZWN_POLL_DELAY_INITIAL          "PollDelayInitial"
#define ZWN_POLL_DELAY_DEADTIME         "PollDelayDeadTime"
#define ZWN_POLL_MINDELAY               "PollMinDelay"
#define ZWN_POLL_FREQUENCY              "PollFrequency"
#define ZWN_LAST_ERROR                  "LastError"
#define ZWN_DELAY_PROCESSING            "DelayProcessing"
#define ZWN_FAILED_ONLY                 "FailedOnly"
#define ZWN_USE_45                      "Use45"
#define ZWN_USE_MR                      "UseMR"
#define ZWN_TO_3066                     "TO3066"            // indicates when we're going to work around the TO3066 issue
#define ZWN_LIMIT_NEIGHBORS             "LimitNeighbors"    // indicates when we figure manual routing, only consider Z-Wave's neighbors as valid options


[edit] ZWaveDevice

Basic functionality for all ZWave devices

#define ZWDEVICE_FILE                   "S_ZWaveDevice1.xml"
#define ZWDEVICE_SID                    "urn:micasaverde-com:serviceId:ZWaveDevice1"
#define ZWDEVICE_STYPE                  "urn:schemas-micasaverde-com:service:ZWaveDevice:1"

[edit] Variables

#define ZWD_POLL_SETTINGS               "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define ZWD_POLL_COMMANDS               "PollCommands"      // A comma-separated list of command classes/commands to poll.  X means the device won't respond to any poll
#define ZWD_MULTCH_ENDPOINT             "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define ZWD_MULTCH_CAPABIL              "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST

#define ZWD_NEIGHBORS                   "Neighbors"         // DEVICEDATA_Neighbors_to_Call_CONST
#define ZWD_NEIGHBORS_INVERSE           "NeighborsInverse"  // Which neighbors see us
#define ZWD_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
#define ZWD_SECURITY_FAILED             "SecurityFailed"    // Don't talk to this node with security even if it reports it can
#define ZWD_CONFIG                      "Configuration"     // DEVICEDATA_Configuration_CONST
#define ZWD_LAST_RESET                  "LastReset"         // DEVICEDATA_Last_Reset_CONST
#define ZWD_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
#define ZWD_SCENES_TIMESTAMPS           "ScenesTimestamp"   // DEVICEDATA_Scenes_CONST
#define ZWD_WAKEUP_INTERVAL             "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
#define ZWD_LAST_WAKEUP                 "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
#define ZWD_LAST_ROUTE_UPD              "LastRouteUpdate"   // DEVICEDATA_Last_Route_Update_CONST
#define ZWD_HEALTH                      "Health"            // A rating from 0-5
#define ZWD_HEALTH_DATE                 "HealthDate"        // The date the rating was assigned
#define ZWD_VARIABLES_GET               "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
#define ZWD_VARIABLES_SET               "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
#define ZWD_ASSOCIATION_GET             "AssociationGet"    // DEVICEDATA_Association_Get_CONST
#define ZWD_ASSOCIATION_SET             "AssociationSet"    // DEVICEDATA_Association_Set_CONST
#define ZWD_ASSOCIATION_NUM             "AssociationNum"
#define ZWD_NONCE_ACK                   "NonceACK"
#define ZWD_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define ZWD_VERSION_INFO                "VersionInfo"       // DEVICEDATA_Configuration_CONST
#define ZWD_SETPOINT_INFO               "SetPointInfo" 
#define ZWD_NODE_INFO                   "NodeInfo"          // The Z-Wave node info frame
#define ZWD_INITIAL_NAME                "InitialName"       // The name that was initially set when the node was first added
#define ZWD_CONFIGURED_NAME             "ConfiguredName"    // The user-specified name when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_CONFIGURED_VARIABLE         "ConfiguredVariable" // The user-specified VariablesSet when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_CONFIGURED_ASSOC            "ConfiguredAssoc"   // The user-specified AssociationSet when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_DOCUMENTATION               "Documentation"     // For the Z-Wave options page
#define ZWD_METER_TYPE                  "MeterType"
#define ZWD_METER_SCALE                 "MeterScale"
#define ZWD_ALARM_TYPE                  "AlarmType"
#define ZWD_POLL_OK                     "PollOk"
#define ZWD_POLL_TX_FAIL                "PollTxFail"
#define ZWD_POLL_NO_REPLY               "PollNoReply"
#define ZWD_MANUAL_ROUTE                "ManualRoute"       // A route specified by an end-user
#define ZWD_ALL_ROUTES_FAILED           "AllRoutesFailed"
#define ZWD_AUTO_ROUTE                  "AutoRoute"         // A route chosen by profilings
#define ZWD_IGNORE_DIRECT_SCENE         "IgnoreDirectScene" // See notes in IsSceneControllerEvent

[edit] InsteonNetwork

Basic functionality for all Insteon devices

#define INN_FILE                        "S_InsteonNetwork1.xml"
#define INN_SID                         "urn:micasaverde-com:serviceId:InsteonNetwork1"
#define INN_STYPE                       "urn:schemas-micasaverde-org:service:InsteonNetwork:1"

[edit] Actions

#define INN_RESET_NETWORK               "ResetNetwork"
#define INN_REMOVE_NODES                "RemoveNodes"
#define INN_ADD_NODES                   "AddNodes"
#define INN_STOP_ADDREM_NODES           "StopAddRemoveNodes"
#define INN_SEND_DATA                   "SendData"

[edit] Variables

#define INN_COM_PORT                    "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define INN_LOCK_COM_PORT               "LockComPort"  
#define INN_LAST_ERROR                  "LastError"
#define INN_LAST_UPDATE                 "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define INN_NET_STATUS_ID               "NetStatusID"  
#define INN_NET_STATUS_TEXT             "NetStatusText"  
#define INN_POLL_ENABLED                "PollingEnabled"
#define INN_POLL_DELAY_INITIAL          "PollDelayInitial"
#define INN_POLL_DELAY_DEADTIME         "PollDelayDeadTime"
#define INN_POLL_MINDELAY               "PollMinDelay"
#define INN_POLL_FREQUENCY              "PollFrequency"
#define INN_NODE_ID                     "NodeID"            // The dongle's id
#define INN_SL_X10_CODE                 "sl_X10Code"


[edit] InsteonDevice

Basic functionality for all Insteon devices

#define INDEVICE_FILE                   "S_InsteonDevice1.xml"
#define INDEVICE_SID                    "urn:micasaverde-com:serviceId:InsteonDevice1"
#define INDEVICE_STYPE                  "urn:schemas-micasaverde-com:service:InsteonDevice:1"

[edit] Variables

#define IND_POLL_SETTINGS               "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define IND_MULTCH_ENDPOINT             "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define IND_MULTCH_CAPABIL              "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST

#define IND_NEIGHBORS                   "Neighbors"         // DEVICEDATA_Neighbors_to_Call_CONST
#define IND_CAPABILITIES                "Capabilities"      // DEVICEDATA_Capabilities_CONST
#define IND_CONFIG                      "Configuration"     // DEVICEDATA_Configuration_CONST
#define IND_LAST_RESET                  "LastReset"         // DEVICEDATA_Last_Reset_CONST
#define IND_SCENES_AS_EVENTS            "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
#define IND_WAKEUP_INTERVAL             "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
#define IND_LAST_WAKEUP                 "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
#define IND_LAST_ROUTE_UPD              "LastRouteUpdate"   // DEVICEDATA_Last_Route_Update_CONST
#define IND_VARIABLES_GET               "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
#define IND_VARIABLES_SET               "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
#define IND_ASSOCIATION_GET             "AssociationGet"    // DEVICEDATA_Association_Get_CONST
#define IND_ASSOCIATION_SET             "AssociationSet"    // DEVICEDATA_Association_Set_CONST
#define IND_MANUF_INFO                  "ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define IND_VERSION_INFO                "VersionInfo"       // DEVICEDATA_Configuration_CONST
#define IND_UPDATED_NAME                "UpdatedName"       // DEVICEDATA_Update_Name_CONST


[edit] USB UIRT

Basic functionality for USB UIRT

#define UIRT_FILE                       "S_USBUIRT.xml"
#define UIRT_SID                        "urn:micasaverde-com:serviceId:USBUIRT1"
#define UIRT_TYPE                       "urn:schemas-micasaverde-com:service:USBUIRT:1"

[edit] Variables

#define UIRT_COM_PORT                   "ComPort"


[edit] Camera

Basic functionality for all Cameras

#define CAMDEVICE_FILE                  "S_Camera1.xml"
#define CAMDEVICE_SID                   "urn:micasaverde-com:serviceId:Camera1"
#define CAMDEVICE_STYPE                 "urn:schemas-micasaverde-com:service:Camera:1"

[edit] Variables

#define CAM_USERNAME                    "Username"          // DEVICEDATA_AuthUser_CONST
#define CAM_PASSWORD                    "Password"          // DEVICEDATA_AuthPassword_CONST

#define CAM_RELATED_SENSORS             "RelatedSensors"    // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
#define CAM_SENSOR_ARCHIVE_SEC          "SensorArchiveSeconds" // Integer: And after the sensor(s) are tripped archive the video for  seconds.
#define CAM_RELATED_LIGHTS              "RelatedLights"     // Comma separated list: Which lights should be turned on when viewing this camera:
#define CAM_LIGHT_OPTIONS               "LightOptions"      // V=When I view the camera from the web or phone.
                                                            // S=When the sensor(s) above are tripped and they are armed
                                                            // B=When the sensors above are tripped and they are *not* armed
                                                            // A=When you take an automatic picture for the archive
                                                            // So: VSBA means do them all

#define CAM_AUTO_ARCH_SEC               "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds
#define CAM_AUTO_PRES_DAYS              "AutoArchivePreserveDays" // and keep the pictures x days
#define CAM_URL                         "URL"               // DEVICEDATA_Path_CONST
#define CAM_DIRECT_URL                  "DirectStreamingURL"
#define CAM_TIMEOUT                     "Timeout"


[edit] PanTiltZoom

For Cameras

#define PTZ_FILE                        "S_PanTiltZoom1.xml"
#define PTZ_SID                         "urn:micasaverde-com:serviceId:PanTiltZoom1"
#define PTZ_STYPE                       "urn:schemas-micasaverde-com:service:PanTiltZoom:1"

[edit] Actions

#define PTZ_LEFT                        "MoveLeft"
#define PTZ_RIGHT                       "MoveRight"
#define PTZ_UP                          "MoveUp"
#define PTZ_DOWN                        "MoveDown"
#define PTZ_IN                          "ZoomIn"
#define PTZ_OUT                         "ZoomOut"


[edit] SwitchPower1

#define SWP_SID                         "urn:upnp-org:serviceId:SwitchPower1"

[edit] Actions

#define SWP_SET_TARGET                  "SetTarget"

[edit] Variables

#define SWP_STATUS                      "Status" 
#define SWP_TARGET                      "Target"


[edit] S_WindowCovering1

#define WC_SID                          "urn:upnp-org:serviceId:WindowCovering1"

[edit] Actions

#define WC_UP                           "Up"
#define WC_DOWN                         "Down"
#define WC_STOP                         "Stop"

[edit] Variables

#define WC_STATUS                       "Status"
#define WC_TARGET                       "Target"


[edit] Dimming1

#define SWD_SID                         "urn:upnp-org:serviceId:Dimming1"

[edit] Actions

#define SWD_SET_LOAD_LEVEL              "SetLoadLevelTarget"

[edit] Variables

#define SWD_LOAD_LEVEL_STATUS           "LoadLevelStatus"
#define SWD_LOAD_LEVEL_TARGET           "LoadLevelTarget"


[edit] DoorLock1

#define DL_SID                          "urn:micasaverde-com:serviceId:DoorLock1"

[edit] Actions

#define DL_SET_TARGET                   "SetTarget"
#define DL_SET_PIN                      "SetPin"
#define DL_CLEAR_PIN                    "ClearPin"
#define DL_SET_PIN_DATE                 "SetPinValidityDate"
#define DL_SET_PIN_WEEK                 "SetPinValidityWeekly"
#define DL_CLEAR_PIN_VALID              "ClearPinValidity"

[edit] Variables

#define DL_STATUS                       "Status"
#define DL_TARGET                       "Target"
#define DL_MIN_PIN_SIZE                 "MinPinSize"
#define DL_MAX_PIN_SIZE                 "MaxPinSize"
#define DL_KEEP_PIN_CODES               "KeepPinCodes"
#define DL_SL_USER_CODE                 "sl_UserCode"
#define DL_SL_PIN_FAILED                "sl_PinFailed"
#define DL_SL_LOCK_BUTTON               "sl_LockButton"
#define DL_SL_LOCK_FAILURE              "sl_LockFailure"
#define DL_SL_UNAUTH_USER               "sl_UnauthUser"
#define DL_SL_LOW_BATTERY               "sl_LowBattery"
#define DL_SL_VERY_LOW_BATTERY          "sl_VeryLowBattery"
#define DL_SL_CODE_CHANGED              "sl_CodeChanged"

#define DL_PIN_CODES                    "PinCodes"      // DEVICEDATA_PIN_Codes_CONST
#define DL_NUM_SCHEDULES                "NumSchedules"  // DEVICEDATA_PIN_Codes_CONST


[edit] HVAC_UserOperatingMode1

#define HVACO_SID                       "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"

[edit] Actions

#define HVACO_SET_MODE                  "SetModeTarget"

[edit] Variables

#define HVACO_TARGET                    "ModeTarget"
#define HVACO_STATUS                    "ModeStatus"
#define HVACO_SUPPORTED                 "SupportedType"

[edit] HVAC_OperatingState1

#define HVACS_SID                       "urn:micasaverde-com:serviceId:HVAC_OperatingState1"

[edit] Variables

#define HVACS_STATE                     "ModeState"
#define HVACS_STATE_ENERGY              "ModeStateForEnergy"


[edit] HVAC_FanOperatingMode1

#define HVACF_SID                       "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"

[edit] Actions

#define HVACF_SET_MODE                  "SetMode"

[edit] Variables

#define HVACF_STATUS                    "Mode"


[edit] TemperatureSetpoint1_Heat/Cool

#define HVACHEAT_SID                    "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
#define HVACCOOL_SID                    "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"

[edit] Actions

#define HVACHC_SETPOINT                 "SetCurrentSetpoint"

[edit] Variables

#define HVACHC_CURRENTSP                "CurrentSetpoint"
#define HVACHC_SETPOINT_TARGET          "SetpointTarget"


[edit] TemperatureSensor1

#define TEMP_SID                        "urn:upnp-org:serviceId:TemperatureSensor1"

[edit] Variables

#define TEMP_CURRENT                    "CurrentTemperature"


[edit] LightSensor1

#define LIGHT_SID                       "urn:micasaverde-com:serviceId:LightSensor1"

[edit] Variables

#define LIGHT_CURRENT                   "CurrentLevel"


[edit] HumiditySensor1

#define HUM_SID                         "urn:micasaverde-com:serviceId:HumiditySensor1"

[edit] Variables

#define HUM_CURRENT                     "CurrentLevel"


[edit] SecuritySensor1

#define SES_SID                         "urn:micasaverde-com:serviceId:SecuritySensor1"

[edit] Variables

#define SES_ARMED                       "Armed"
#define SES_TRIPPED                     "Tripped"
#define SES_LAST_TRIP                   "LastTrip"

[edit] Action

#define SES_SET_ARMED                   "SetArmed"


[edit] EnergyMetering1

#define ENE_SID                         "urn:micasaverde-com:serviceId:EnergyMetering1"

[edit] Actions

#define ENE_RESETKWH                    "ResetKWH"      // Reset Kwh

[edit] Variables

#define ENE_KWH                         "KWH"
#define ENE_KWH_READING                 "KWHReading"    // The time it was last read
#define ENE_KVARH                       "kVARh"
#define ENE_KVAR                        "kVAR"
#define ENE_WATTS                       "Watts"
#define ENE_PULSE                       "Pulse"
#define ENE_ACTUAL                      "ActualUsage"
#define ENE_USER_SUPPLIED               "UserSuppliedWattage"
#define ENE_WHOLE_HOUSE                 "WholeHouse"
#define ENE_LOG                         "Log"


[edit] IrTransmitter1

#define IRT_SID                         "urn:micasaverde-com:serviceId:IrTransmitter1"

[edit] Variables

#define IRT_SENDPRONTO                  "SendProntoCode"


[edit] SerialPort1

#define SPT_SID                         "urn:micasaverde-org:serviceId:SerialPort1"

[edit] Variables

#define SPT_BAUD                        "baud"
#define SPT_VENDOR                      "vendor"
#define SPT_PRODUCT                     "product"
#define SPT_PATH                        "path"


[edit] SceneController1

#define SCR_SID                         "urn:micasaverde-com:serviceId:SceneController1"

[edit] Variables

#define SCR_SL_SCENE_ACTIVATED          "sl_SceneActivated"
#define SCR_SL_SCENE_DEACTIVATED        "sl_SceneDeactivated"
#define SCR_SCENES                      "Scenes"
#define SCR_LAST_SCENE_ID               "LastSceneID"
#define SCR_LAST_SCENE_TIME             "LastSceneTime"
#define SCR_MANAGE_LEDS                 "ManageLeds"
#define SCR_NUM_BUTTONS                 "NumButtons"
#define SCR_FIRES_OFF_EVENTS            "FiresOffEvents"
#define SCR_SCENE_SHORTCUTS             "SceneShortcuts"
#define SCR_ACTIVATION_METHOD           "ActivationMethod"  // 1=BASIC_SET only (ignore scene_activate) 2=SCENE_ACTIVATE only (ignore basic set).  0=anything goes


[edit] SceneControllerLED1

#define SCL_SID                         "urn:micasaverde-com:serviceId:SceneControllerLED1"

[edit] Actions

#define SCL_SET_LIGHT                   "SetLight"

[edit] Variables

#define SCL_LIGHT_SETTINGS              "LightSettings"


[edit] GenericIO

#define GIO_SID                         "urn:micasaverde-com:serviceId:GenericIO"

[edit] Variables

#define GIO_IS_INPUT                    "IsInput"           // DEVICEDATA_InputOrOutput_CONST, 1 if it's input
#define GIO_DEFAULT_STATE               "DefaultState"      // DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed


[edit] IR

#define IR_SID                          "urn:micasaverde-com:serviceId:IrDevice1"

[edit] Actions

#define IR_SEND_CODE                    "SendCode"

[edit] Variables

#define IR_CODESETS                     "Codesets"
#define IR_CODESET                      "Codeset"
#define IR_REMOTE                       "Remote"
#define IR_MFRID                        "MfrId"
Personal tools