Luup Requests

From MiOS
Revision as of 17:53, 10 April 2012 by Mcvflorin (Talk | contribs)

Jump to: navigation, search

In addition to sending requests using standard UPnP, you can also do most things using a simple HTTP requests. Use the built-in URL data_request, and pass the following on the URL:

  • id the id of the request (prior to 15 Oct 2010 all requests had an lu_ in front, which is now optional),
  • output_format the format in which you want a response as json, xml or text.

Not all requests support all output_format options. Here is a list of requests:

Contents

user_data

Example: http://ipaddress:3480/data_request?id=user_data&output_format=xml

This returns the configuration data for Vera, which is a list of all devices and the UPnP variables which are persisted between resets as well as rooms, names, and other data the user sets as part of the configuration.

status

Example: http://ipaddress:3480/data_request?id=status&output_format=xml

Or for a specific device: http://ipaddress:3480/data_request?id=status&output_format=xml&UDN=uuid:4d494342-5342-5645-0002-000000000002 or http://ipaddress:3480/data_request?id=status&output_format=xml&DeviceNum=6

This returns the current status for all devices including all the current upnp variables and the status of any active jobs.

sdata

This is an abbreviated form of user_data and status (sdata=summary data). It allows a user interface that is only worried about control, and not detailed configuration, to get a summary of the data that would normally be presented to the user and to monitor the changes. See UI_Simple for a walkthrough.

actions

device

Example: http://ipaddress:3480/data_request?id=device&action=rename&device=5&name=Chandalier&room=3

Example: http://ipaddress:3480/data_request?id=device&action=rename&device=5&name=Chandalier&room=Garage

Example: http://ipaddress:3480/data_request?id=device&action=delete&device=5

This renames or deletes a device. Use action=rename or action=delete. For rename, you can optionally assign a room by either passing either the ID or the name.


---old--- This returns all the XML with all the UPNP device description documents. Use: http://ipaddress:3480/data_request?id=device&output_format=xml&DeviceNum=x or &UDN=y to narrow it down. Then when you see the service URL's, like <SCPDURL>/luvd/S_HVAC_UserOperatingMode1.xml</SCPDURL>, you can view them with: http://ipaddress:3480/luvd/S_HVAC_UserOperatingMode1.xml ---end old---

scene

Example: http://ipaddress:3480/data_request?id=scene&action=record

Example: http://ipaddress:3480/data_request?id=scene&action=pause&seconds=y

Example: http://ipaddress:3480/data_request?id=scene&action=stoprecord

Example: http://ipaddress:3480/data_request?id=scene&action=listrecord

Example: http://ipaddress:3480/data_request?id=scene&action=deleterecord&number=x

Example: http://ipaddress:3480/data_request?id=scene&action=saverecord&name=whatever&room=X

Example: http://ipaddress:3480/data_request?id=scene&action=rename&scene=5&name=Chandalier&room=Garage

Example: http://ipaddress:3480/data_request?id=scene&action=delete&scene=5

Example: http://ipaddress:3480/data_request?id=scene&action=create&json=[valid json data]

Example: http://ipaddress:3480/data_request?id=scene&action=list&scene=5

This creates, renames, or deletes a scene depending on the action.

Recording a scene means whatever actions come in after sending the 'record' will be saved into an internal buffer. listrecord shows what's recorded so far. pause adds a pause. deleterecord deletes some action in the internal buffer. When deleting, for number=x, use the same 'id' in listrecord. saverecord takes the internal buffer, the recorded macro, and saves it as an actual scene.

To create a scene by hand, rather than recording it, use 'create'. When using the 'create' command json must be valid JSON for a scene as documented in Scene_Syntax. The name, room and optional id (if you're overwriting an existing scene) are passed in the json, so nothing is on the command line except the json. Because the json data can be long it is recommended to send it as an http POST instead of GET with the data passed with the name "json"

list returns the JSON data for an existing scene.

room

Example: http://ipaddress:3480/data_request?id=room&action=create&name=Kitchen

Example: http://ipaddress:3480/data_request?id=room&action=rename&room=5&name=Garage

Example: http://ipaddress:3480/data_request?id=scene&action=delete&room=5

This creates, renames, or deletes a room depending on the action. To rename or delete a room you must pass the room id for the room=.

file

lua

action

Example: http://ipaddress:3480/data_request?id=action&output_format=xml&DeviceNum=6&serviceId=urn:upnp-org:serviceId:SwitchPower1&action=SetTarget&newTargetValue=1

Sends a UPnP action.

To run a scene, you send the action 'RunScene' like this::

http://ipadress:3480/data_request?id=lu_action&serviceId=urn:micasaverde-com:serviceId:HomeAutomationGateway1&action=RunScene&SceneNum=<SceneNum>

variableset

http://ip:3480/data_request?id=variableset&DeviceNum=6&serviceId=urn:micasaverde-com:serviceId:DoorLock1&Variable=Status&Value=1

If you leave off the DeviceNum and serviceID, then this sets a top-level json tag called "Variable" with the value.

variableget

http://ip:3480/data_request?id=variableget&DeviceNum=6&serviceId=urn:micasaverde-com:serviceId:DoorLock1&Variable=Status

If you leave off the DeviceNum and serviceID, then this gets a top-level json tag called "Variable".

reload

Resets the Luup engine with any new configuration settings.

alive

Return OK if the engine is running.

finddevice

Returns the device number, UDN and device type of the first device that matches any or all the parameters passed on the URL: devtype, ip, devid, where devid is the altid of the device.

Example: http://192.168.81.1:3480/data_request?id=finddevice&devid=6

resync

ReSync's all the devices, rooms, users, sections with event servers and returns OK

wget

Returns the contents of the URL you pass in the "url" argument. Optionally append "user" and "pass" arguments for http authentication, and "timeout" to specify the maximum time to wait in seconds.

iprequests

Returns the recent IP requests in order by most recent first, including information about devices in use and if the IP is blacklisted (ignored by the plug and play mechanism). Optionally append "oldest" to specify the oldest IP request in seconds.

blacklistip

Append "ip" to the URL, and optionally "remove=1" to add (or remove) the IP to the blacklist so plug and play IP devices won't be added.

Not implemented yet!

live_energy_usage

For backward compatibility it reports current energy usage in a tab delimited format

request_image

NOTE: request_video is not implemented yet.

Returns an image from a camera. This fetches the image from the camera using the URL variable for the device. Pass arguments:

cam = the device id of the camera.  This is the only mandatory argument.
res = optional: a resolution, which gets appended to the variable.  So passing "low" means the image from the URL_low variable will be returned.  If it doesn't exist it reverts to the standard URL or DirectStreamingURL 
timeout = optional: how long to wait for the image to be retrieved, or how long to retrieve video.  defaults to 10 seconds.
url = optional: override the camera's default URL
ip = optional: override the camera's default ip
user or pass = optional: override the camera's default username/password

jobstatus

Returns the status of a job. The parameters are job, which is the job ID and optionally plugin, which is the plugin name. For a Z-Wave job the plugin parameter must be zwave.

Examples:

http://192.168.81.1:3480/data_request?id=jobstatus&job=13

http://192.168.81.1:3480/data_request?id=jobstatus&job=6&plugin=zwave

invoke

relay

This tells the system to setup a relay so that you can access a device on the home network from outside the home. This is most commonly used to fetch streaming video from a camera, although it can actually be used for any IP device. This takes either an 'ip' or 'device' argument. If you pass a device, this is assumed to be a device ID, and the system will find the ip associated with that device. Optionally pass a port argument for the port you want to be relayed. Port 80 is assumed if none is specified.

This request will return a 'server:port' which you can use externally to access the designated device. The relay stays open for 15 minutes before closing, at which point you will need to open it again.

So, assume you have a NAS device on the home network with the ip 192.168.1.55 and the NAS runs a configuration web page on port 80. You could access it by doing this:

data_request?ip=192.168.1.55&port=80

and if the response is: "someserver:20202", then for 15 minutes, "http://someserver:20202" will be the NAS's configuration page.

If you want to access a camera, device #5, then do this:

data_request?device=5

and if the response is "someserver:20211" and if the 'DirectStreamURL' variable (or 'streaming' in sdata) is "video.mpeg", then for 15 minutes you can access the camera's video at: http://someserver:20211/video.mpeg

Note that if the device, the camera in this case, has http authentication, you will need to pass this too. So, if the user_data or sdata for the camera shows the user name is 'johndoe' and the password is 'john123', then you can view the video at: http://john:john123@someserver:20211/video.mpeg

IMPORTANT: For the 15 minutes while this relay is open, it will be open to anyone on the internet and public. Therefore, for security, you may want to add to the data_request the argument externalip=x where x is the routable, external IP, such as 70.182.172.111, of the device that will be accessing the port. This means that when the relay is open, a firewall will be set on the relay server so that incoming connections are only accepted from that ip address.

What to do when the HTTP request string is too long

http://forum.micasaverde.com/index.php/topic,10170.msg69530.html#msg69530

Personal tools