Intro Security

From MiOS
(Difference between revisions)
Jump to: navigation, search
(How to do it)
Line 13: Line 13:
 
Wired or Wireless cameras
 
Wired or Wireless cameras
  
If you buy the wireless cameras from Mi Casa Verde the come pre-configured to work with your Vera so you just plug them in and no setup is required
+
If you buy the wireless cameras from Mi Casa Verde they come pre-configured to work with your Vera so you just plug them in and no setup is required
  
 
'''Mobile phone'''
 
'''Mobile phone'''

Revision as of 15:00, 15 September 2008

Vera gives you a powerful home security system. You receive alerts instantly via SMS, Email or telephone calls. You can view your home's surveillance cameras, both live, and see an archive when the sensor was tripped so you can call the police if there is a real security break-in. And you can remotely arm/disarm your alarm and open doors. This uses FindVera.com's secure server, which uses the same protection used for on-line banking, so you don't need to worry about unauthorized people getting in to disarm your alarm or view your cameras.

What you'll need:

Z-Wave security sensors:

Motion Sensors, Door/Window sensors

They're all wireless and battery operated so installation is simple.

Security cameras:

Wired or Wireless cameras

If you buy the wireless cameras from Mi Casa Verde they come pre-configured to work with your Vera so you just plug them in and no setup is required

Mobile phone

Any mobile phone that can receive text messages will work to receive alerts. To remotely control your house, get a mobile phone with an internet connection. For Blackberry's and other phones that support Java we offer a handy control application. For all other phones, just use the built-in web browser.

How to do it

1. As described in the Quick Start Guide, connect Vera and get into Vera's setup panel by visiting FindVera.com from any web browser and clicking 'setup'.

2. Perform the basic setup process of listing the rooms in your home, adding your devices (the sensors and cameras), and creating a password on FindVera.com. This takes only a couple minutes and is described here:

3. On the devices tab click the '+' sign next to the camera(s). For each camera indicate which sensors the camera is close to, what lights to turn on when viewing the camera, and how to archive the video.

4. You probably want to arm the sensors when you leave the house and disarm them when you return home so that you are not notified when the sensors are tripped while you are home. So go to the Scene tab and create a scene called something like "Leave Home" or "Arm System". Under that scene go to all the sensors and choose "ARM" from the first pull-down. You can also set the lights and thermostat to "OFF" if you want them to turn off when you leave the house. Next, create a scene called something like "Return Home" or "Disarm system" that changes the sensors back to "BYPASS" and puts the lights and thermostat back to your preferred setting when you come home.

5. Under the Automation tab click "Add Event", type a description like "Security Breach", and under Event Type choose "An armed sensor is tripped". Then check off the sensors which, when tripped should trigger the alarm. Because the event is "An armed sensor is tripped", and the scene you just created arms the sensors when you choose the "Leave Home" scene and puts them on bypass when you choose "Return Home", that means every time you leave home you should remember to choose the "Leave Home" scene to arm the sensors, just like you arm your alarm when you leave home. Otherwise you won't get alerts when the sensors are tripped. And, when you return home, choose "Return Home" to bypass the sensors so you're not receiving alerts when the sensors are tripped because you're at home.

6. You can also create a scene something like "Go to sleep" or "Armed at home" which arms some sensors and bypasses others. For example, while you're in the home you may want the motion detectors on "BYPASS" and the door/window sensors "ARMED" so that you can walk around the home without triggering an alarm, but a burglar trying to break in through a door or window will trip the alarm.

7. If you want to always be notified whenever certain sensors are tripped, regardless of whether or not they are armed, add an Event of the type "A sensor is tripped", as opposed to "An armed sensor is tripped".

Personal tools