ITemp

From MiOS
Revision as of 17:56, 10 January 2014 by Mcvchris (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

iTEMP is a complex device with Temperature sensor, binary sensor and even thermostat functions. To fully support iTEMP in VERA the following steps are required:

  • Make sure you have at least version 1.5.622 on your unit
  • Go to Apps -> Install Apps
  • Login if needed
  • Search for "iTemp" and install it
  • After the plugin is installed a new generic device will be installed

Generic-plugin.png

  • Go to the Advanced tab and locate the iTemp_Devices variable

Itemp variable.png

  • Fill in the Device #ID of the physical iTemp device, which you already included in the network
  • You can find the Device #ID by clicking on the wrench key on your physical MiMolite device and you will find it under Settings tab.

Device id.JPG

  • A new child device will be created which you can use in scenes and triggers

Binary device.png

Personal tools