Fibaro Flood Sensor FGFS-101

From MiOS
(Difference between revisions)
Jump to: navigation, search
(Created page with "This sensor supports 2 types of tamper alarms, for the tamper switch and the tilt. However, they do not use the official Z-Wave alarm types. They only send a 'generic alarm'...")
 
 
Line 1: Line 1:
This sensor supports 2 types of tamper alarms, for the tamper switch and the tilt.  However, they do not use the official Z-Wave alarm types.  They only send a 'generic alarm' type of 0, so there is no way to know the type of tamper, and it is treated as a generic alarm, which in this indicates a floodTherefore by default variable #74 is set to 0 to turn these tamper alerts off.
+
This sensor supports 2 types of tamper alarms, for the tamper switch and the tilt.  However, they do not use the official Z-Wave alarm types, and both use the generic alarm type, so they are both reported as a tamperSet variable #74 to 0 to turn these tamper alerts off.

Latest revision as of 19:40, 28 June 2014

This sensor supports 2 types of tamper alarms, for the tamper switch and the tilt. However, they do not use the official Z-Wave alarm types, and both use the generic alarm type, so they are both reported as a tamper. Set variable #74 to 0 to turn these tamper alerts off.

Personal tools