EtherRain Sprinkler Controller

From MiOS
Revision as of 02:45, 30 August 2009 by 325xi (Talk | contribs)

Jump to: navigation, search

Etherrain8.jpg EtherRain Sprinkler Controller allows controlling of up to 8 regular 24V irrigation valves.

To control Etherrain from Vera the following steps are required

  • Create Etherrain device as sual, assign a room, and click Save
  • Once reloaded, go to Variables, and enter the required parameters as following
    • IP address of the Etherrain controller
    • StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required
    • Valve1-9 - irrigation time for each valve, in minutes, leave zero for not used valves.
    • User and Password - update, or leave default values if you haven't changed them on the controller
  • Save

EtherRain-vars.png

Now you can click On to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero. It will stop automatically once irrigation cycle completed. Off button will stop irrigation cycle

EtherRain-basic.png

Personal tools