EtherRain Sprinkler Controller

From MiOS
(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
 
[[Image:Etherrain8.jpg‎]]
 
[[Image:Etherrain8.jpg‎]]
 +
 
[http://www.quicksmart.com/qs_etherrain.html EtherRain Sprinkler Controller] allows controlling of up to 8 regular 24V irrigation valves.
 
[http://www.quicksmart.com/qs_etherrain.html EtherRain Sprinkler Controller] allows controlling of up to 8 regular 24V irrigation valves.
 +
 +
  
 
To control Etherrain from Vera the following steps are required
 
To control Etherrain from Vera the following steps are required
  
* Create Etherrain device as sual, assign a room, and click Save
+
* Create Etherrain device as usual, assign a room, and click Save
 
* Once reloaded, go to Variables, and enter the required parameters as following
 
* Once reloaded, go to Variables, and enter the required parameters as following
 
** IP address of the Etherrain controller
 
** IP address of the Etherrain controller
 
** StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required
 
** StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required
** Valve1-9 - irrigation time for each valve, in minutes, leave zero for not used valves.  
+
** Valve1-8 - irrigation time for each valve, in minutes, leave zero for not used valves.  
 
** User and Password - update, or leave default values if you haven't changed them on the controller
 
** User and Password - update, or leave default values if you haven't changed them on the controller
 
* Save
 
* Save
  
 
[[Image:EtherRain-vars.png]]
 
[[Image:EtherRain-vars.png]]
 +
 +
  
 
Now you can click '''On''' to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero.
 
Now you can click '''On''' to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero.
 
It will stop automatically once irrigation cycle completed.
 
It will stop automatically once irrigation cycle completed.
 +
 
'''Off''' button will stop irrigation cycle   
 
'''Off''' button will stop irrigation cycle   
  
 
[[Image:EtherRain-basic.png‎]]
 
[[Image:EtherRain-basic.png‎]]
 +
 +
 +
 +
Enjoy!

Revision as of 02:48, 30 August 2009

Etherrain8.jpg

EtherRain Sprinkler Controller allows controlling of up to 8 regular 24V irrigation valves.


To control Etherrain from Vera the following steps are required

  • Create Etherrain device as usual, assign a room, and click Save
  • Once reloaded, go to Variables, and enter the required parameters as following
    • IP address of the Etherrain controller
    • StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required
    • Valve1-8 - irrigation time for each valve, in minutes, leave zero for not used valves.
    • User and Password - update, or leave default values if you haven't changed them on the controller
  • Save

EtherRain-vars.png


Now you can click On to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero. It will stop automatically once irrigation cycle completed.

Off button will stop irrigation cycle

EtherRain-basic.png


Enjoy!

Personal tools