Duwi schematics

From MiOS
(Difference between revisions)
Jump to: navigation, search
m (New page: Category:Installation Category:Hardware This page provides information on how to install a Duwi setup in combination with a Merten receiver with the following devices; # DUWI INT...)
 
m (Installation to replace a standard dual switch with a Z-Wave configuration)
Line 2: Line 2:
 
[[Category:Hardware]]
 
[[Category:Hardware]]
  
 +
'''Installation to replace a standard dual switch with a Z-Wave configuration.'''
 
This page provides information on how to install a Duwi setup in combination with a Merten receiver with the following devices;
 
This page provides information on how to install a Duwi setup in combination with a Merten receiver with the following devices;
  

Revision as of 06:10, 31 May 2011


Installation to replace a standard dual switch with a Z-Wave configuration. This page provides information on how to install a Duwi setup in combination with a Merten receiver with the following devices;

  1. DUWI INTEREACT Z-WAVE DIMMER (Wall fitting)
  2. DUWI EVERLUX WALL switch (Can be place anywhere, battery operated)
  3. DUWI double frame (not depicted)
  4. Merten CONNECT receiver/switch (In wall fitting)



Note, This setup also works when Vera is not active.


These are the universal schematics for the setup described:
Universal Schematics


Please view this file for the dutch instructions: NLD schema

Personal tools