Luup Devices
Home Automation Device
The generic device type that all MiOS devices implement.
Service
- urn:micasaverde-com:serviceId:HaDevice1
Variables
Actions
Switch
A binary switch, for an appliance, florescent light, or a relay.
Service
- urn:upnp-org:serviceId:SwitchPower1
Variables
Status
The state of the device. 1 is on, 0 is off.
Actions
SetTarget
Sets the target state of the dimmer
Arguments: NewTargetValue(Integer)
NewTargetValue: 1 for on, 0 for off.
Dimmer
A dimmable light.
Service
- urn:upnp-org:serviceId:Dimming1
Variables
newTargetValue: an integer between 0 and 100 indicating the desired % of lighting.
Actions
SetLoadLevelTarget
Sets the desired brightness or load level for the dimming device.
Arguments: newLoadlevelTarget(Integer)
newLoadLevelTarget: an integer between 0 and 100 indicating the desired % of lighting/load.
Sensor
A security sensor, or any device that can be "tripped"
Service
u*rn:micasaverde-com:serviceId:SecuritySensor
Variables
Armed
An integer. 1 for armed, 0 for disarmed. This is an internal state variable of the MiOS engine and has nothing to do with the state of the sensor.
Tripped
An integer. 1 for tripped, 0 for not.
LastTrip
An integer with the UNIX timestamp of the last trip event that the MiOS engine recorded.
Actions
SetArmed
Sets the armed state of the sensor.
Arguments: newArmedValue(Integer)
newArmedValue: 1 for armed, 0 for disarmed.
HVAC/Climate
Lorem ipsum dolor sit amet, ultricies ligula ligula maecenas, sed laboriosam erat.
Service
- urn:upnp-org:serviceId:HVAC_UserOperatingMode1
- For action SetModeTarget
- urn:upnp-org:serviceId:TemperatureSetpoint1_Heat
- For action NewCurrentSetpoint
- urn:upnp-org:serviceId:TemperatureSetpoint1_Cool
- For action NewCurrentSetpoint
- urn:upnp-org:serviceId:HVAC_FanOperatingMode1
- For action SetMode
Variables
urn:upnp-org:serviceId:HVAC_UserOperatingMode1 ModeStatus
One of Off, HeatOn, CoolOn, or AutoChangeOver depending on the User operation mode of the thermostat.
urn:upnp-org:serviceId:HVAC_FanOperatingMode1 ModeStatus
One of Auto, ContinuousOn, or PeriodicOn depending on the fan mode of the thermostat.
urn:upnp-org:serviceId:TemperatureSensor1 CurrentTemperature
An integer value representing the temperature that the thermostat is reporting.
urn:upnp-org:serviceId:TemperatureSetpoint1_Heat CurrentSetpoint
An integer value representing the heat setpoint for the thermostat
urn:upnp-org:serviceId:TemperatureSetpoint1_Cool CurrentSetpoint
An integer value representing the cool setpoint for the thermostat
Actions
SetModeTarget
Sets the desired operation mode for the thermostat.
Arguments: NewModeTarget(String)
NewModeTarget: One of Off, CoolOn, HeatOn, or AutoChangeOver.
SetCurrentSetpoint
Sets the desired setpoint. User serviceId urn:upnp-org:serviceId:TemperatureSetpoint1_Heat for heat and urn:upnp-org:serviceId:TemperatureSetpoint1_Cool for cooling
Arguments: NewCurrentSetpoint(Integer)
NewCurrentSetpoint: An integer value between 0 and 100 specifying the desired heat or cooling setpoint.
SetMode
Sets the fan operation mode for the thermostat
Arguments: NewMode(String)
NewMode: One of ContinuousOn or Auto, depending on the desired mode of operation for the HVAC system's fan.
Lock
Lorem ipsum dolor sit amet, ultricies ligula ligula maecenas, sed laboriosam erat.
Service
urn:micasaverde-com:serviceId:DoorLock1
Variables
Status
1 for locked, 0 for unlocked
Actions
SetTarget
Sets the desired lock state of the door lock
Arguments: newTargetValue(integer)
newTargetValue: 1 for lock, 0 for unlock
Window Covering
Blinds and shades.
Service
- urn:upnp-org:serviceId:WindowCovering1
- urn:upnp-org:serviceId:SwitchPower1
- Supports the same actions and variables as a switch. On is closed, Off is open.
Actions
Up
Moves the covering up.
Down
Moves the covering down.
Stop
Stops the covering moving.
Sensor - Humidity
A humidity sensor.
Service
urn:micasaverde-com:serviceId:HumiditySensor1
Variables
CurrentLevel(Integer): The current humidity level that the sensor is reporting.
Sensor - Temperature
A temperature sensor.
Service
urn:upnp-org:serviceId:TemperatureSensor1
Variables
CurrentLevel(Integer): The current temperature in degrees the sensor is reporting.
Sensor - Light
A light sensor.
Service
urn:schemas-micasaverde-com:service:LightSensor:1
Variables
CurrentLevel(Integer): The current light level that the sensor is reporting.
Power Meter
A power meter or a device that can display power usage.
Service
urn:micasaverde-com:serviceId:EnergyMetering1
Variables
Watts(Integer): The energy draw the meter is recording, in watts.
