Supported Hardware

This is a page for Supported Z-Wave devices.

Alternative hardware pages exist for

Z-Wave Handheld Remote Controls, Gateways and Scene Controllers
IP Enabled Cameras
Insteon/X10 devices
USB, or USB-Serial, Interface devices

In general, any device with the Z-Wave logo should work with Vera. A list of tested Z-Wave devices is below, with specific notes for each type of device. This is a wiki, so feel free to add to the page. To learn about Z-Wave routing and fixing routing problems see: Heal Network

Hardware Reported to Work

We strongly encourage users to list any and all products they tested and installed.
If a product works but you did not like it, please list it anyway. It may be the only product available to some users.

IMPORTANT! The devices listed here have been added by installers, technicians and users like yourself. Results may vary upon installations. MiCasaVerde does not guarantee operation and compatibility with your installation. The listed devices were found to work with their specific installation. Mixing different series and brands of equipment is not guaranteed in any way to work with other series and brands. It is very likely that users have not fully tested all features of the devices, so it is possible that a device listed here as compatible, will not prove compatible with your hardware. If you are editing this wiki DO NOT REMOVE a listed working device if it hasn't worked for you. Seek help to get the device to work under your individual circumstance. If you are adding to this wiki, please provide links to data for the device and add any tips you feel may benefit someone wanting to implement the device into an installation.

Lighting Devices

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added by User	Notes
ACT	2-way Dimmer Switch	ZDW120		Nov 2008	Indoor	Link	Link	WSeverino	Works well, easy to install, LED is a very bright blue....can be programmed to be off when the light is off or on.
ACT	3-way Dimmer Switch	ZDW103		Nov 2008	Indoor	Link	Link	WSeverino	Works well, can be tricky to install due to the different combination of 3 way circuits, LED is a very bright blue....can be programmed to be off when the light is off or on.
ACT	2-wire Dimmer Switch	ZDW232		Jul 2010	Indoor	Link	Link	Newb	Wall-mount, 230v, 500W, 2-Wire (no neutral), works well. Can be programmed to be off when the light is off or on.
ACT	2-way Relay Switch	ZRW113		Nov 2008	Indoor	Link	Link	WSeverino	Controls Florescent Lamps very well! No humming at all.
ACT	Companion Switch	AS101		Nov 2008	Indoor	Link	Link	WSeverino	Works well, can be tricky to install due to the different combination of 3 way circuits, The trick here is to install this device where the power comes in.
ACT	3-way Dimmer Switch, 2 rocker	ZDM230	1.1	Aug 2009	Indoor	Link		TedStriker	Dimmer, Wall-mount, 230v, 500W, 3-way, 3 Wire, 2 rocker
ACT	3-way Relay Switch, 2 rocker	ZRM230	1.1	Aug 2009	Indoor	Link		TedStriker	Relay, Wall-mount, 230v, 6A, 3-way, 3 Wire, 2 rocker - Status polling does not work with Vera
Cooper	Accessory (3-way slave)				Indoor				See Cooper Accessory Slave
Innovus	Relay Switch Adapter	RAone SmartPower		Aug 2009	Indoor	Link		TedStriker	Works very well + it has a build in powermeter which works perfect with Vera
Innovus	Dimmer Switch Adapter	RAone SmartDimmer		Aug 2009	Indoor	Link		TedStriker	Works very well + it has a build in powermeter which works perfect with Vera
Intermatic	Lamp Module	HA03C		Sept 2010	Indoor	Link		JonnyO	Easy to Instal, supports dimming
Intermatic	Screw-in Lamp Module	HA05C		Nov 2008	Indoor/Outdoor	Link	Link	WSeverino	Easy install, easy to pair with Vera!
Intermatic	300 watt dimmer	HA06		July 2007	Indoor	Link			Affordable Dimmer Switch. incandescent/halogen only. Loads for 300 watts or less no neutral required. Great for dimming one bulb.
Intermatic	3-way Switch	HA18		Dec 2008	Indoor	Link		Kozanator	Affordable 3-way Switch
Intermatic	3-way Dimmer Switch	HA20		Nov 2008	Indoor	Link	Link		Affordable 3-way 600W dimmer
Leviton	Dimmer Switch	VRI06-1LX		Aug 2009	Indoor	Link		guessed	Works well
Leviton	4-Scene Controller with Switch	VRCS4-MRX	7,2,67,0,2	Aug 2009	Indoor	Link		guessed	Works well, pair as per Leviton 4-Scene Controller, then again holding "2" and "4" to pair the Switch ("Load") itself.
Leviton	Dimmer Switch	VRM10-1LX	1	Nov 2008	Indoor	Link	Link	mark-hc	This is a high quality dimmer geared towards high-end installations
Merten	Radio sensor cover for dimmer inserts	5026xx, 5036xx, 5046xx	6,2,7,1,5	Apr 2009	Indoor	Link		Ap15e	Works well
Merten	Radio sensor cover for switch inserts	5024xx, 5034xx, 5044xx	6,2,27,2,2		Indoor	Link		Ap15e	Works well
Merten	Single Radio flush-mounted receiver	507001	6,2,27,2,2	Apr 2009	Indoor	Link		Ap15e	Works well
Merten	switch, flush-mounted	507501, 507601			Indoor	Link		Ap15e	Works well (according to Link)
Merten	1-gang universal dimmer, flush-mounted	507900			Indoor	Link		Ap15e	Works well (according to Link)
Schlage	Lamp Module	RP200	1.0	Aug 2009	Indoor	Link		LibraSun	Works well Sold with Schlage LiNK lock system

Plug & Receptacle Devices

Manufacturer	Device Type	Model no.	Version	Frequency	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added by User	Notes
ACT	In-Wall Receptacle	ZRR150W	2.2		Nov 2008	Indoor	Link	Link		Works like a champ! Easy to Install. One receptacle RF controlled, the other is hot
Cooper Wiring Devices	In-Wall Receptacle	RFTR9505-T				Indoor	Link			One receptacle is RF controlled, the other is hot
Duwi	Z-Wave switch 3500 W	05437		EU	Feb 2009	Indoor	Link		ezhome	High quality Plug-in switch, Easy install and works well
Intermatic	In-Wall Receptacle	CA3500	1		Nov 2008	Indoor	Link	Link		This is a decent, but expensive solution for in-wall receptacles. One receptacle RF controlled, the other is hot.
Intermatic	Appliance Module	HA02C	1		Nov 2008	Indoor	Link	Link		Seems to work well
Intermatic	Outdoor Module	HA04C	1		Dec 2008	Outdoor	Link	Link	Kozanator	Easy to Install.
Merten	switch, plug adapter, 2000 W	508519	6,2,7,1,5	EU		Indoor	Link		Ap15e	Works well.
Monster Central	1800W Appliance Module	ML-LAS1000	1		Jan 2009	Indoor	Link		guessed	Easy to Install. I use this as a ZWave signal repeater. Appears to be a badge-engineering of Leviton VRP15-1LW

Thermostat Devices

Manufacturer	Device Type	Model no.	Version	Frequency	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Notes
Wayne Dalton	Wall Stat	WDTC-20	??		Nov 2008	Indoor	Link	Link	Has 2 inclusion modes: 1) press and release the bind button and the STAT will be included as a thermostat and works with Vera, 2) press and hold the bind button and it will be added as a binary switch for compatibility with old, non-compliant remotes. If it's added in the wrong mode, remove it and re-add it. Works great simple to use!
HAI	Wall Stat	RC-80BZ	??		Nov 2007	Indoor	Link	Link	Shows up as Standard Thermostat in Vera, Hold button feature not able to control by Vera at this time. Priced above 200.00. Has internal setback programs. Works great.
RCS	Wall Stat	TZ43	??		Nov 2008	Indoor	Link	Link	Shows up as Standard Thermostat in Vera, much more feature rich the the WDTC-20 but comes with a hefty price tag ($214.95). Wish Vera could use all the features in this Thermostat! Note:You need to set the thermostat to show the temperature, on its display, in Celsius degree in order to be able to receive "Set Temp" commands from Vera. This is no longer required in firmwares above *1.0.862 (luup)*
Schlage/Trane	Wall Stat	Trane	??		??	Indoor	Link	Link	It's the same thermostat as the RCS TZ43 and it has the same issue: it's accepting "Set Temp Point" commands only in the measurement unit that is displayed on its screen. Note:You need to set the thermostat to show the temperature, on its screen, in Celsius degree in order to be able to receive "Set Temp" commands from Vera. This is no longer required in firmwares above *1.0.862 (luup)*
Intermatic	InTouch	CA8900			Nov 2008	Indoor	Link		Looks very similar to the Wayne Dalton WDTC-20 listed here. works great, simple to use
Danfoss	Radiator thermostat	RA PLUS-w		EU		Indoor	Link Link	Link [1]	See: Danfoss Thermostat for installation instructions If the device cannot be configured at the final location, move the device closer to Vera and try again (this device might require a direct connection to Vera for configuration).

HVAC

Manufacturer	Device Type	Model no.	Frequency	Added by User
Exhausto	Speed Regulator for Ventilation System	500124	EU	mcvflorin
Exhausto	Remote Control for Ventilation System	500125	EU	mcvflorin
Exhausto	Repeater	EW	EU	mcvflorin

Sensors

Manufacturer	Device Type	Model no.	Version	Frequency	Date Purchased	Location (indoor/outdoor)	Specs	Added by User	Notes
ACT	Motion Sensor	ZIR000 / ZIR010		EU (ZIR010) or US (ZIR000)		Indoor	Link Link Link Link		Remove the cover, pair to Vera's dongle by using the push-button on the left of the circuit board. Vera must configure it to work, and it can only be configured within less of a minute (30 sec best) of inserting the batteries. With Vera's dongle removed, remove/reinsert the batteries, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page
Aeon Labs	3-in-1 sensor (light/humidity/temperature)	MultiSensor		EU or US		Indoor/Outdoor	Specs		Pair to Vera by using the push-button. Vera must configure it to work, and it can only be configured within 10 minutes of inserting the batteries.
Express Controls aka HomeSeer	3-in-1 sensor (light/temperature/motion)	HSM100 / EZMotion		EU or US			Link		See ExpressControls3in1 If the motion sensor does not work right after inclusion and configuration, remove the batteries for a few seconds.
EverSpring/Hawking/Home Manageables	Door/window sensor	SM103	6,2,9,1,0	EU or US	Apr 2009	Indoor	Link Link	Ap15e	Pair using the intrusion button. The sensor will accept configuration within a few minutes of the initial pairing, or of pressing the intrusion button on the back even after it's paired. Pair the device, or if it's already paired, press the intrusion button, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page. NOTE: There is some confusion about the orientation of the sensor. The main sensor body has a back (where the intrusion is), a front (where the logo and LED is), and the 2 other surfaces, one of which has a curved edge, and the other is flat. The magnet needs to go against the flat surface. And the flat surface on the magnet should be as close as possible to the flat surface on the sensor, lined up in the middle so the line which passes through the LED lines up with the sensor. Note: In case the inclusion/exclusion fails you should remove/reinsert the batteries from the sensor and within a few seconds the sensor should be automatically detected.
EverSpring/Home Manageables	Humidity + Temperature sensor	HM-TS001			Jan 2010 (requires version 1.1.0 or greater)	Indoor	Link Link	micasaverde	Pair or unpair the device by tapping the CF button 3 times very quickly. Once it's paired and shows up in the UI as a generic device, press the CF button 3 times again quickly to make it wakeup and get configured. Then it will correctly be identified as 3 devices (combo device + temperature + humidity).
Everspring	Motion Detector	SP103	6,2,9,1,0	EU or US	Apr 2009	Indoor	Link Link	Ap15e	Works well
Fortrezz	Water /Freeze	WWA-001	??????	US	Apr 2009	Indoor	Link Link	Zmistro	Works great I would place a few in your house. Bathrooms, laundry , kitchen , basement. Great product!
Intermatic	Motion Sensor	CA-9000		US		Indoor		Aaron	This device has limited functionality as a sensor. It can only be used to turn on and off a light directly by setting an association, which Vera supports. It does not fire events, so you cannot use it as an event on a scene.
Merten	4-gang radio transmitter, flush-mounted	506004	2,2,27,1,4	EU		Indoor	Link	Ap15e	Note: There is proprietary functionality here. Support will be added soon. Quite complex device; partially supported by Vera; can be used as a window/door sensor (as of firmware 1.0.900) ...

Door Locks

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added By User	Notes
Schlage	Door lock and deadbolt	BE369 (deadbolt)		Mid 2009	Indoor	Link		LibraSun	Read the instructions here: Schlage Lock

Drapes/Blinds

Manufacturer	Device Type	Model no.	Version	Location (indoor/outdoor)	Specs	Product Review	Added By User	Notes
Electronic Solutions	Drape/Blind Motor Controller	DBMZ	V2+1	Indoor	For 12-24VDC Motors	Link	Shady	2-Wire Motors
Electronic Solutions	Drape/Blind Motor Controller	ABMHZ	V2+1	Indoor	For 110-230VAC Motors	Link	Shady	4-Wire Motors
Lagotek / RSSceneAutomation	Drape/Blind Motor Controller	DC1-ZW		Indoor	For 12-24VDC Motors	Link	Shady	2-Wire Motors
Lagotek / RSSceneAutomation	Drape/Blind Motor Controller	AC1-ZW		Indoor	For 110-230VAC Motors	Link	Shady	4-Wire Motors

Relay controls

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added By User	Notes
Intermatic	Contactor control box	CA3750		Nov 2007	Indoor/Outdoor	Link			Multi-instance class supported for this device. Vera is able to control each of the 2 relays independently if desired. please note unit shows as three switches this is a bug with Intermatic not a real issue.You can check the box in devices to not show the second listing of the first relay in "Dasboard" You can control heavy loads like a water heater ,pool pump motor/s. great device

Window Coverings

Manufacturer Device Type Model no. Version Frequency Date Purchased Location (indoor/outdoor) Specs Product Review Added by User Notes

Merten

Radio roller shutter push-button

5025xx, 5035xx, 5045xx

6,2,27,2,3 and 6,2,27,2,4

EU

Apr 2009

Indoor

Link

Ap15e

Open/Close buttons work well, but slide bar does not work. GUI buttons do not work with Luup release 1.0.843 and 1.0.862 (fixed with Luup release 1.0.879).
Workaround: Use a Luup Scene with the following code:

local lul_arguments = {}

lul_arguments["newTargetValue"]="0"

lul_resultcode,lul_resultstring,lul_job,lul_returnarguments = luup.call_action("urn:upnp-org:serviceId:SwitchPower1","SetTarget",lul_arguments,6) Replace "6" with your device number, replace "0" with "1" for inverse action.

Duewi

Radio roller shutter push-button

054368

6,2,51,1,0

EU

Jun 2009

Indoor

Link

Lutz

Open/Close buttons work well, but slide bar does not work.

Some additional observations by Ap15e (Vera V1, firmware 1.0.979):

GUI button 'Stop' and corresponding UPnP service does not work.
GUI button 'Up' moves the shutter down, GUI button 'Down' moves the shutter up ...
After adjusting the running times even the slide bar seems to work!
I got a report from a user that the düwi device may fail due to interference from the shutter motor. In this case an additional filter is required (costs about 25 €/direction).
More information is available at Link

Cameras that work

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Path for JPEG image	Product Review	Notes
Linksys	IP Camera	WVC54GCA	all	2009	Indoor	img/snapshot.cgi		An inexpensive camera with moderate image quality. Use the Linksys setup wizard for initial setup, then copy IP address and path into Vera setup fields. Use a static IP address.
Linksys	IP Camera	WVC210	all	2009	Indoor	img/snapshot.cgi		A more expensive camera with good image quality and pan/tilt ability. Use the Linksys setup wizard for initial setup, then copy IP address and path into Vera setup fields. Use a static IP address. Pan/tilt controls will not work with Vera.
Linksys	IP Camera	WVC80N	all	2009	Indoor	img/snapshot.cgi?size=2&quality=1		A more expensive camera with good image quality and wireless N. Use the Linksys setup wizard for initial setup, then copy IP address and path into Vera setup fields. Use a static IP address. Pan/tilt controls will not work with Vera. Size can be (160 x 120 = 1,320 x 240 = 2,640 x 480 = 3) and Quality can be (Very High= 1,High= 2,Normal= 3,Low= 4,Very Low= 5)
iCamView	IP Camera Server	iCV-22, iCV-32	all	2009	Indoor/Outdoor	pda.cgi?user=admin&password=1234&page=image&cam=1 pda.cgi?user=admin&password=1234&page=image&cam=2		Feature-rich IP camera server, suports up to two compatible USB cameras, optional WiFi support, USB storage, USB hubs, motion; works with range of cameras, see icamview.co.uk. Excellent modular solution. They do ship to North America.
SmartHome.com.au	IP Camera	Z~Series Wireless Camera	all	2009	Indoor	tmpfs/auto.jpg		Inexpensive IP security camera designed for the Australian and New Zealand Z-Wave users, but shipping world wide.
LevelOne	IP Camera	WCS-2030	all	2010	Indoor	cgi-bin/video.jpg	CNET review	An inexpensive IP camera with good image quality. Can be connected wired or wirelessly. Most LevelOne cameras use the same path for the JPEG image, so most of their line (both low and high end) should be compatible. Video and audio also stream over RTSP, which can be customized through the camera's web interface.
Asante	IP Camera	Voyager I	firmware 2.02 and above	2010	Indoor	image.cgi		An inexpensive IP camera that is very feature rich, has good image quality, night vision capabilities, motion detection, two-way audio, video streaming over TCP, UDP, or HTTP, and other configurable features. In firmware version 2.02, Asante added the capability to retrieve an image via a URL (however, it is delayed by 3 seconds). Offers a full-featured web interface in IE using an ActiveX plug-in (limited capabilites in other browsers).

Alarm Panels

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added by User	Notes
2GIG	Alarm Panel	Go! Control-345						mcvflorin

Supported Hardware

Contents