Networking Setup:Vera WiFi in Client Mode

If you already have a wireless network and you want to connect Vera to it, you'll need to set Vera Wi-Fi to Client mode. To do that follow these steps:

Step 0. Unplug any cables from the WAN Port
Step 1. Open Vera Web Admin page: http://local.findvera.com
Step 2. Go to Advanced -> Net&Wi-Fi
Step 3. Set:
            - Firewall: No Firewall (bridge)
            - DHCP Server: Off
Step 4. Press Save & Apply Changes
Step 5. Go to Advanced -> Net&Wi-Fi -> Advanced Configurations
       If you haven't setup any users, login with root (by default there is no password)
Step 6. Go to Network -> Wireless
Step 7. Wireless Adapter wl0 Configuration
        Set Radio to On and Channel to Auto
Step 8. Wireless Virtual Adapter Configuration for Wireless Card wl0 
        Set:
             - Mode: Client
             - ESSID: (according to your existing wireless network)
             - Encryption Type: (according to your existing wireless network)
Step 9. Press Save & Apply Changes