EtherRain Sprinkler Controller

EtherRain Sprinkler Controller allows controlling of up to 8 regular 24V irrigation valves.

To control Etherrain from Vera the following steps are required

• Create Etherrain device as sual, assign a room, and click Save
• Once reloaded, go to Variables, and enter the required parameters as following
  • IP address of the Etherrain controller
  • StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required
  • Valve1-9 - irrigation time for each valve, in minutes, leave zero for not used valves.
  • User and Password - update, or leave default values if you haven't changed them on the controller
• Save

Now you can click On to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero. It will stop automatically once irrigation cycle completed. Off button will stop irrigation cycle