Supported Hardware

Note: There is a separate page for Z-Wave Handheld remote controls, Z-Wave gateways, and Z-Wave Scene Controllers: click here.  There is also a separate page for IP cameras: click here

In general, any device with the Z-Wave logo should work with Vera. A list of tested Z-Wave devices is below, with specific notes for each type of device. This is a wiki, so feel free to add to the page.

Hardware Reported to Work

• We strongly encourage users to list any and all products they tested and installed.
• If a product works but you did not like it, please list it anyway. It may be the only product available to some users.

---

IMPORTANT! The devices listed here have been added by installers, technicians and users like yourself. Results may vary upon installations. MiCasaVerde does not guarantee operation and compatibility with your installation. The listed devices were found to work with their specific installation. Mixing different series and brands of equipment is not guaranteed in any way to work with other series and brands. It is very likely that users have not fully tested all features of the devices, so it is possible that a device listed here as compatible, will not prove compatible with your hardware. If you are editing this wiki DO NOT REMOVE a listed working device if it hasn't worked for you. Seek help to get the device to work under your individual circumstance. If you are adding to this wiki, please provide links to data for the device and add any tips you feel may benefit someone wanting to implement the device into an installation.

---

Lighting Devices

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added by User	Notes
Leviton	Dimmer Switch	VRM10-1LX	1	Nov 2008	Indoor	Link	Link	mark-hc	This is a high quality dimmer geared towards high-end installations
Intermatic	300 watt dimmer	HA06		July 2007	Indoor	Link			Affordable Dimmer Switch. incandescent/halogen only. Loads for 300 watts or less no neutral required. Great for dimming one bulb.
Intermatic	3-way Switch	HA18		Dec 2008	Indoor	Link		Kozanator	Affordable 3-way Switch
Intermatic	3-way Dimmer Switch	HA20		Nov 2008	Indoor	Link	Link		Affordable 3-way 600W dimmer
ACT	2-way Dimmer Switch	ZDW120		Nov 2008	Indoor	Link	Link	WSeverino	Works well, easy to install, LED is a very bright blue....can be programmed to be off when the light is off or on.
ACT	3-way Dimmer Switch	ZDW103		Nov 2008	Indoor	Link	Link	WSeverino	Works well, can be tricky to install due to the different combination of 3 way circuits, LED is a very bright blue....can be programmed to be off when the light is off or on.
ACT	2-way Relay Switch	ZRW113		Nov 2008	Indoor	Link	Link	WSeverino	Controls Florescent Lamps very well! No humming at all.
ACT	Companion Switch	AS101		Nov 2008	Indoor	Link	Link	WSeverino	Works well, can be tricky to install due to the different combination of 3 way circuits, The trick here is to install this device where the power comes in.
Intermatic	Screw-in Module	HA05C		Nov 2008	Outdoor	Link	Link	WSeverino	Easy install, easy to pair with Vera!
Merten	Radio sensor cover for dimmer inserts	5026xx, 5036xx, 5046xx	6,2,7,1,5	Apr 2009	Indoor	Link		Ap15e	Works well
Merten	Single Radio flush-mounted receiver	507001	6,2,27,2,2	Apr 2009	Indoor	Link		Ap15e	Works well

Plug & Receptacle Devices

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added by User	Notes
Intermatic	In-Wall Receptacle	CA3500	1	Nov 2008	Indoor	Link	Link		This is a decent, but expensive solution for in-wall receptacles
Intermatic	Appliance Module	HA02C	1	Nov 2008	Indoor	Link	Link		Seems to work well
ACT	In-Wall Receptacle	ZRR150W	2.2	Nov 2008	Indoor	Link	Link		Works like a champ! Easy to Install
Intermatic	Outdoor Module	HA04C	1	Dec 2008	Outdoor	Link	Link	Kozanator	Easy to Install.

Thermostat Devices

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Notes
Wayne Dalton	Wall Stat	WDTC-20	??	Nov 2008	Indoor	Link	Link	Has 2 inclusion modes: 1) press and release the bind button and the STAT will be included as a thermostat and works with Vera, 2) press and hold the bind button and it will be added as a binary switch for compatibility with old, non-compliant remotes. If it's added in the wrong mode, remove it and re-add it. Works great simple to use!
HAI	Wall Stat	RC-80BZ	??	Nov 2007	Indoor	Link	Link	Shows up as Standard Thermostat in Vera, Hold button feature not able to control by Vera at this time. Priced above 200.00. Has internal setback programs. Works great.
RCS	Wall Stat	TZ43	??	Nov 2008	Indoor	Link	Link	Shows up as Standard Thermostat in Vera, much more feature rich the the WDTC-20 but comes with a hefty price tag ($214.95). Wish Vera could use all the features in this Thermostat! Note:You need to set the thermostat to show the temperature, on its display, in Celsius degree in order to be able to receive "Set Temp" commands from Vera
Intermatic	InTouch	CA8900		Nov 2008	Indoor	Link		Looks very similar to the Wayne Dalton WDTC-20 listed here. works great, simple to use
Danfoss	Radiator thermostat	RA PLUS-w			Indoor			See: Danfoss Thermostat for installation instructions

Sensors

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added by User	Notes
ACT	Motion Sensor	PIR000 / PIR010			Indoor				Remove the cover, pair to Vera's dongle by using the push-button on the left of the circuit board. Vera must configure it to work, and it can only be configured within a few minutes of inserting the batteries. With Vera's dongle removed, remove/reinsert the batteries, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page
Express Controls aka HomeSeer	3-in-1 sensor (light/temperature/motion)								See ExpressControls3in1
EverSpring/Hawking/Home Manageables	Door/window sensor	SM103	6,2,9,1,0	Apr 2009	Indoor	Link Link		Ap15e	Pair using the intrusion button. The sensor will accept configuration within a few minutes of the initial pairing, or of pressing the intrusion button on the back even after it's paired. Pair the device, or if it's already paired, press the intrusion button, and within 30 seconds insert Vera's dongle. Within a few minutes confirm the "configure" icon for the device is green on Vera's setup page. NOTE: There is some confusion about the orientation of the sensor. The main sensor body has a back (where the intrusion is), a front (where the logo and LED is), and the 2 other surfaces, one of which has a curved edge, and the other is flat. The magnet needs to go against the flat surface. And the flat surface on the magnet should be as close as possible to the flat surface on the sensor, lined up in the middle so the line which passes through the LED lines up with the sensor.
Everspring	Motion Detector	SP103	6,2,9,1,0	Apr 2009	Indoor	Link Link		Ap15e	Works well
Fortrezz	Water /Freeze	WWA-01	??????	Apr 2009	Indoor	Link Link		Zmistro	Works great I would place a few in your house. Bathrooms, laundry , kitchen , basement. Great product!

Door Locks

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Notes
Schlage	Door lock and deadbolt				Indoor			Read the instructions here: Schlage Lock

Drapes/Blinds

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Notes
Electronic Solutions	Drape/Blind motor	DBMZ			Indoor		Link

Relay controls

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Notes
Intermatic	Contactor control box	CA3750		Nov 2007	Indoor/Outdoor	Link		Multi-instance class supported for this device. Vera is able to control each of the 2 relays independently if desired. please note unit shows as three switches this is a bug with Intermatic not a real issue.You can check the box in devices to not show the second listing of the first relay in "Dasboard" You can control heavy loads like a water heater ,pool pump motor/s. great device

Window Coverings

Manufacturer	Device Type	Model no.	Version	Date Purchased	Location (indoor/outdoor)	Specs	Product Review	Added by User	Notes
Merten	Radio roller shutter push-button	5025xx, 5035xx, 5045xx	6,2,27,2,3 and 6,2,27,2,4	Apr 2009	Indoor	Link		Ap15e	Open/Close buttons work well, but slide bar does not work. Device does not work with Luup release 1.0.843. Workaround: Use a Luup Scene with the following code: local lul_arguments = {} lul_arguments["newTargetValue"]="0" lul_resultcode,lul_resultstring,lul_job,lul_returnarguments = luup.call_action("urn:upnp-org:serviceId:SwitchPower1","SetTarget",lul_arguments,6) Replace "6" with your device number, replace "0" with "1" for inverse action.
Duewi	Radio roller shutter push-button	054368	6,2,51,1,0	Jun 2009	Indoor	Link		Lutz	Open/Close buttons work well, but slide bar does not work.