How to reset to default network settings

How to reset to default network settings on UI5

By default Vera automatically configures its network, if you connect it to your router it will automatically connect to it's network. If after plugging Vera into your network, you don't see your Vera on cp.mios.com , please follow these steps to fix your networking:

- Put a STATIC IP to your computer.

• In Windows 8

     From the Tiles menu click on "PC Settings"
     From the bottom left of the menu select "Control Panel"
     Click on "Network and Internet" and then select "Network and Sharing Center"
     Click on "Change adapter settings" in the left menu
     Right click on the "Ethernet" connection and click on "Properties"
     From the list highlight "Internet Protocol Version 4 (TCP/IPv4) and click on the "Properties" button
     Check "Use the following IP address:" and fill in the three fields as follows:
     IP address: 192.168.81.10
     Subnet mask: 255.255.255.0
     Default gateway: 192.168.81.1
     Click OK
     Click Close

• In Windows 7

      Open Control Panel
   View by: Large icons -> Network and Sharing Center
   View by: Category -> View netork status and tasks
   Click on Change adapter settings
   Right click on LAN connection to Vera , then click on Properties
   Highlight the Internet Protocol Version 4 (TCP/IPv4) item, and click on Properties
   In the IP address field enter 192.168.81.10
   In the subnet mask field enter 255.255.255.0
   In the Default gateway field enter 192.168.81.1
   Click OK
   Click OK Again

• In Windows XP

      Open Windows Start menu.
   Open Control Panel.
   Classic view: Open Network Connections
   Category view: Select Network and Internet Connections, and then Network Connections.
   Double-click on your the LAN connection to Vera.
   Click Properties.
   In the General tab, highlight the Internet Protocol (TCP/IP) item, and click Properties. 
   In the IP address field enter 192.168.81.10
   In the subnet mask field enter 255.255.255.0
   In the Default gateway field enter 192.168.81.1
   Click OK
   Click OK again

• In Mac OS X

      Open the Apple Menu(Top left corner of your screen)
   Click System Preferences
   Click Network
   Click the Locations dropdown and select Edit Locations
   Click the plus sign and call your new location "Vera system Troubleshooting"
   Select "Ethernet" from the list on the left
   Select "Manually" from the Configure IPv4 dropdown
   Enter 192.168.81.10 in the IP address field
   Enter 255.255.255.0 in the subnet mask field
   Enter 192.168.81.1 in the Router field
   Hit "Apply"

- Unplug Vera from the power cord

- Unplug all the cables from Vera

- Plug a network cable from your computer into Vera's LAN port

    Vera 2    -> eth2 port
    Vera 3    -> lan port (port number 1) 
    Vera Lite -> ethernet port

- Plug Vera into the power cord

- Wait it to start

Now open an web browser and type this in the address bar: 192.168.81.1
Now you can see the DASHBOARD page of your Vera unit.

For UI7:

Go to Settings > Net & Wi-fi Click on the “Reset to default network settings” button.

Confirm by clicking the “OK” Button on the pop-up window.

This will reset the unit to default network settings and can take up to 5 minutes. Now you can unplug the Vera unit from your computer and connect it to the internet.

For UI5:

Go to SETUP > Net & Wifi

Click on the "reset to default network settings" button.

This will reset the unit to default network settings and can take up to 5 minutes.

Now you can unplug the Vera unit from your computer and connect it to the internet.

For UI4:

Go to Advanced > Net & Wifi Click on the  "reset to default network settings" button.

This will reset the unit to default network settings and can take up to 5 minutes.

Now you can unplug the Vera unit from your computer and connect it to the internet.