BASETech RGB LED

RGB plugin for the BASETech RGB LED light bulb

Requirements

Hardware

BASETech RGB LED light bulb: http://www.conrad.de/ce/de/product/361131/Basetech-LED-RGB-mit-IR-Fernbedienung-E27-37W-Globeform

IR emitter: http://www.gwendesign.com/slimserver/dev_hard_and_software.htm#irblaster

Squeezebox V2/V3 or Transporter

Software

Logitech Media Server (LMS) running on Windows/WHS/MacOS/Linux/ReadyNAS: http://www.mysqueezebox.com/download

IR Blaster plugin for LMS: http://www.gwendesign.com/slimserver/dev_hard_and_software.htm#irblaster

LIRC configuration file for the IR Blaster: https://docs.google.com/open?id=0Bz4omZm4gYcsX18xTnFhaTNpVlk

RGB plugin for MiOS and LIRC configuration file for the BASETech remote: https://docs.google.com/open?id=0Bz4omZm4gYcsU08yNHkwNXhSLTA

Installation

Install LMS.

Install the IR Blaster plugin for LMS (http://wiki.slimdevices.com/index.php/IR_Blaster).

Copy BASETech_E27_RGB_LED.conf to the home directory of the IR Blaster plugin and reload the IR Blaster configuration files.

Install and setup the RGB plugin for MiOS: set SBS_IP_adress (LMS IP address), set SBS_CLI_port (LMI CLI port, default: 9090), SBS_IR_transmitter_MAC (MAC address of Squeezebox), restart LuaUPnP.

Usage

Use the GUI buttons or the following UPnP actions (UPnP service id: urn:ap15e-com:serviceId:BASETech_E27_RGB_LED1):

On
Off
 
AutoColor
StoreColor
NextColor
 
Dim20
Dim40
Dim60
Dim80
Dim100
 
Red, Red1-Red4
Green, Green1-Green4
Blue, Blue1-Blue4
White

Screenshots

Limitations

The Squeezebox Touch does not support RAW IR codes (as defined in BASETech_E27_RGB_LED.conf). It might be possible to convert the LIRC configuration file to non-raw format, e.g. Pronto code. Then it would even be possible to use the RGB LED with any IrTransmitter1 (e.g., USB UIRT; use SendProntoCode to send IR commands, see http://wiki.micasaverde.com/index.php/Luup_UPnP_Variables_and_Actions#IrTransmitter1).

Example

Synchonize the color of the LED of a CO2 sensor with the color of your BASETech light bulb:

Install the CVS plugin: http://wiki.micasaverde.com/index.php/CO2_Sensor

Setup three scenes:

"Good air"  : trigger 'CO2/VOC level goes below 1000 ppm' and UPnP action 'Green'

"Air getting bad": trigger 'CO2/VOC level goes above 1000 ppm' and UPnP action 'Red4' (=yellow)

"Bad air"  : trigger 'CO2/VOC level goes above 1500 ppm' and UPnP action 'Red'

Technical information

Remote codes:
 
Bit pattern for IR commands:
 
    1: parity (even)
    2: left (0)/right (1) half of remote
 3- 5: row (top-down: 7-6-1-2-3-4-5)
 6- 8: 000
 9-10: column (left-right: 3-2-1-0)
11-13: row (3-5) inverted
14-16: 111
 
## 1 1 111 000 00 000 111 On          0xF807
## 0 1 111 000 10 000 111 Off         0x7887
 
## 0 0 011 000 11 100 111 Red         0x18E7
## 0 0 100 000 11 011 111 Red1        0x20DF
## 0 0 010 000 11 101 111 Red2        0x10EF
## 0 0 110 000 11 001 111 Red3        0x30CF
## 0 0 001 000 11 110 111 Red4        0x08F7
 
## 1 0 011 000 01 100 111 Green       0x9867
## 1 0 100 000 01 011 111 Green1      0xA05F
## 1 0 010 000 01 101 111 Green2      0x906F
## 1 0 110 000 01 001 111 Green3      0xB04F
## 1 0 001 000 01 110 111 Green4      0x8877
 
## 0 1 011 000 10 100 111 Blue        0x58A7
## 0 1 100 000 10 011 111 Blue1       0x609F
## 0 1 010 000 10 101 111 Blue2       0x50AF
## 0 1 110 000 10 001 111 Blue3       0x708F
## 0 1 001 000 10 110 111 Blue4       0x48B7
 
## 0 0 101 000 11 010 111 White       0x28D7
## 1 0 101 000 01 010 111 AutoColor   0xA857
## 0 1 101 000 10 010 111 StoreColor  0x6897
## 1 1 101 000 00 010 111 NextColor   0xE817
## 1 1 001 000 00 110 111 Dim20       0xC837
## 1 1 110 000 00 001 111 Dim40       0xF00F
## 1 1 010 000 00 101 111 Dim60       0xD02F
## 1 1 100 000 00 011 111 Dim80       0xE01F
## 1 1 011 000 00 100 111 Dim100      0xD827