Luup UPNP Files

From MiOS
Revision as of 08:00, 31 August 2011 by Mcvflorin (Talk | contribs)

Jump to: navigation, search

The following is the contents of the file "Constant.h" which defines the strings used for file device types, services, actions, variables, etc. 

/*
Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation 
All rights reserved. This software may not be used or distributed without express consent.
*/


Contents

Device Types 

#define DEVICETYPE_HOME_AUTO_GATEWAY    "urn:schemas-micasaverde-com:device:HomeAutomationGateway:1"
#define DEVICETYPE_BINARY_LIGHT         "urn:schemas-upnp-org:device:BinaryLight:1"
#define DEVICETYPE_DIMMABLE_LIGHT       "urn:schemas-upnp-org:device:DimmableLight:1"
#define DEVICETYPE_THERMOSTAT           "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
#define DEVICETYPE_HUMIDITY_SENSOR      "urn:schemas-micasaverde-com:device:HumiditySensor:1"
#define DEVICETYPE_MULTI_IO             "urn:schemas-micasaverde-com:device:MultiIO:1"
#define DEVICETYPE_DOOR_LOCK            "urn:schemas-micasaverde-com:device:DoorLock:1"
#define DEVICETYPE_DOOR_SENSOR          "urn:schemas-micasaverde-com:device:DoorSensor:1"
#define DEVICETYPE_ZWAVE_NETWORK        "urn:schemas-micasaverde-com:device:ZWaveNetwork:1"
#define DEVICETYPE_ZIGBEE_NETWORK       "urn:schemas-micasaverde-com:device:ZigbeeNetwork:1"
#define DEVICETYPE_INSTEON_NETWORK      "urn:schemas-micasaverde-com:device:InsteonNetwork:1"
#define DEVICETYPE_USB_UIRT             "urn:schemas-micasaverde-com:device:USBUIRT:1"
#define DEVICETYPE_TEMPERATURE_SENSOR   "urn:schemas-micasaverde-com:device:TemperatureSensor:1"
#define DEVICETYPE_POWER_METER          "urn:schemas-micasaverde-com:device:PowerMeter:1"
#define DEVICETYPE_MOTION_SENSOR        "urn:schemas-micasaverde-com:device:MotionSensor:1"
#define DEVICETYPE_SMOKE_SENSOR         "urn:schemas-micasaverde-com:device:SmokeSensor:1"
#define DEVICETYPE_LIGHT_SENSOR         "urn:schemas-micasaverde-com:device:LightSensor:1"
#define DEVICETYPE_IR_TRANSMITTER       "urn:schemas-micasaverde-com:device:IrTransmitter:1"
#define DEVICETYPE_WINDOW_COVERING      "urn:schemas-micasaverde-com:device:WindowCovering:1"
#define DEVICETYPE_GENERIC_IO           "urn:schemas-micasaverde-com:device:GenericIO:1"
#define DEVICETYPE_REMOTE_CONTROL       "urn:schemas-micasaverde-com:device:RemoteControl:1"
#define DEVICETYPE_COMBO_DEVICE         "urn:schemas-micasaverde-com:device:ComboDevice:1"
#define DEVICETYPE_CAMERA               "urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
#define DEVICETYPE_SERIALPORT           "urn:micasaverde-org:device:SerialPort:1"
#define DEVICETYPE_SERIALPORTROOT       "urn:micasaverde-org:device:SerialPortRoot:1"
#define DEVICETYPE_SCENE_CONTROLLER     "urn:schemas-micasaverde-com:device:SceneController:1"
#define DEVICETYPE_SCENE_CONTR_LED      "urn:schemas-micasaverde-com:device:SceneControllerLED:1"
#define DEVICETYPE_ENERGY_CALCULATOR    "urn:schemas-micasaverde-com:device:EnergyCalculator:1"
#define DEVICETYPE_TEMP_LEAK_SENSOR     "urn:schemas-micasaverde-com:device:TemperatureLeakSensor:1"

#define DEVICETYPE_SCENE                "urn:schemas-micasaverde-com:device:Scene:1"

IR Device Types 

#define DEVICETYPE_IR                   "urn:schemas-micasaverde-com:device:IrDevice:1"
#define DEVICETYPE_TV                   "urn:schemas-micasaverde-com:device:tv:1"
#define DEVICETYPE_CABLE                "urn:schemas-micasaverde-com:device:cable:1"
#define DEVICETYPE_SATELLITE            "urn:schemas-micasaverde-com:device:satellite:1"
#define DEVICETYPE_VIDEO_ACCESSORY      "urn:schemas-micasaverde-com:device:videoaccessory:1"
#define DEVICETYPE_VCR_DVR              "urn:schemas-micasaverde-com:device:vcrdvd:1"
#define DEVICETYPE_DVD_BLURAY           "urn:schemas-micasaverde-com:device:dvdbluray:1"
#define DEVICETYPE_RECEIVER             "urn:schemas-micasaverde-com:device:receiver:1"
#define DEVICETYPE_AMP                  "urn:schemas-micasaverde-com:device:amp:1"
#define DEVICETYPE_CD                   "urn:schemas-micasaverde-com:device:cd:1"
#define DEVICETYPE_MISC_HOME_CONTROL    "urn:schemas-micasaverde-com:device:mischomecontrol:1"
#define DEVICETYPE_AV_MISC              "urn:schemas-micasaverde-com:device:avmisc:1"
#define DEVICETYPE_VIRTUAL_DEVICE       "urn:schemas-micasaverde-com:device:VirtualDevice:1"


Device Files 

#define DEVICEFILE_BINARY_LIGHT         "D_BinaryLight1.xml"
#define DEVICEFILE_DIMMABLE_LIGHT       "D_DimmableLight1.xml"
#define DEVICEFILE_THERMOSTAT           "D_HVAC_ZoneThermostat1.xml"
#define DEVICEFILE_HUMIDITY_SENSOR      "D_HumiditySensor1.xml"
#define DEVICEFILE_MULTI_IO             "D_GC100.xml"
#define DEVICEFILE_DOOR_LOCK            "D_DoorLock1.xml"
#define DEVICEFILE_DOOR_SENSOR          "D_DoorSensor1.xml"
#define DEVICEFILE_ZWAVE_NETWORK        "D_ZWaveNetwork.xml"
#define DEVICEFILE_INSTEON_NETWORK      "D_InsteonNetwork.xml"
#define DEVICEFILE_USB_UIRT             "D_USB_UIRT.xml"
#define DEVICEFILE_TEMPERATURE_SENSOR   "D_TemperatureSensor1.xml"
#define DEVICEFILE_POWER_METER          "D_PowerMeter1.xml"
#define DEVICEFILE_MOTION_SENSOR        "D_MotionSensor1.xml"
#define DEVICEFILE_SMOKE_SENSOR         "D_SmokeSensor1.xml"
#define DEVICEFILE_LIGHT_SENSOR         "D_LightSensor1.xml"
#define DEVICEFILE_IR_TRANSMITTER       "D_IrTransmitter1.xml"
#define DEVICEFILE_IR_DEVICE            "D_IrDevice1.xml"
#define DEVICEFILE_WINDOW_COVERING      "D_WindowCovering1.xml"
#define DEVICEFILE_SERIAL_PORT_ROOT     "D_SerialPortRoot1.xml"
#define DEVICEFILE_GENERIC_IO           "D_GenericIO1.xml"
#define DEVICEFILE_REMOTE_CONTROL       "D_RemoteControl1.xml"
#define DEVICEFILE_COMBO_DEVICE         "D_ComboDevice1.xml"
#define DEVICEFILE_CAMERA               "D_DigitalSecurityCamera1.xml"
#define DEVICEFILE_SCENE_CONTROLLER     "D_SceneController1.xml"
#define DEVICEFILE_SCENE_CONTR_LED      "D_SceneControllerLED1.xml"
#define DEVICEFILE_ENERGY_CALCULATOR    "D_EnergyCalculator1.xml"
#define DEVICEFILE_AV_MISC              "D_AvMisc1.xml"
#define DEVICEFILE_TEMP_LEAK_SENSOR     "D_TempLeakSensor1.xml"

#define DEVICEFILE_AV_SCENE             "D_Scene1.xml"


Device Categories 

#define DEVICE_CATEGORY_INTERFACE       1
#define DEVICE_CATEGORY_DIMMABLE_LIGHT  2
#define DEVICE_CATEGORY_SWITCH          3
#define DEVICE_CATEGORY_SECURITY_SENSOR 4
#define DEVICE_CATEGORY_HVAC            5
#define DEVICE_CATEGORY_CAMERA          6
#define DEVICE_CATEGORY_DOOR_LOCK       7
#define DEVICE_CATEGORY_WINDOW_COV      8
#define DEVICE_CATEGORY_REMOTE_CONTROL  9
#define DEVICE_CATEGORY_IR_TX           10
#define DEVICE_CATEGORY_GENERIC_IO      11
#define DEVICE_CATEGORY_GENERIC_SENSOR  12
#define DEVICE_CATEGORY_SERIAL_PORT     13
#define DEVICE_CATEGORY_SCENE_CONTROLLER 14
#define DEVICE_CATEGORY_AV              15
#define DEVICE_CATEGORY_HUMIDITY        16
#define DEVICE_CATEGORY_TEMPERATURE     17
#define DEVICE_CATEGORY_LIGHT_SENSOR    18
#define DEVICE_CATEGORY_ZWAVE_INT       19
#define DEVICE_CATEGORY_INSTEON_INT     20
#define DEVICE_CATEGORY_POWER_METER     21

#define DEVICE_CATEGORY_MAX             21


Device Sub-Categories 

#define DEVICE_SUBCATEGORY_NONE         0

Security 

#define DEVICE_SUBCATEGORY_DOOR         1
#define DEVICE_SUBCATEGORY_LEAK         2
#define DEVICE_SUBCATEGORY_MOTION       3
#define DEVICE_SUBCATEGORY_SMOKE        4

IR 

#define DEVICE_SUBCATEGORY_IRT          1
#define DEVICE_SUBCATEGORY_USBUIRT      2


HaGateway

Basic functionality for the gateway itself 

#define HAGEVICE_FILE               "S_HomeAutomationGateway1.xml"
#define HAGEVICE_SID                "urn:micasaverde-com:serviceId:HomeAutomationGateway1"
#define HAGEVICE_STYPE              "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"

Variables 

#define HAG_ACTIVE_SCENES           "ActiveScenes"
#define HAG_DATAVERSION_USERDATA    "DataVersionUserData" // The current data version for user_data
#define HAG_DATAVERSION_STATUS      "DataVersionStatus" // The current data version for lu_status

Actions 

#define HAG_GET_USER_DATA           "GetUserData"  
#define HAG_MODIFY_USER_DATA        "ModifyUserData" 
#define HAG_MODIFY_GET_VARIABLE     "GetVariable" 
#define HAG_MODIFY_SET_VARIABLE     "SetVariable" 
#define HAG_MODIFY_GET_STATUS       "GetStatus" 
#define HAG_MODIFY_GET_ACTIONS      "GetActions" 
#define HAG_MODIFY_CREATE_DEVICE    "CreateDevice" 
#define HAG_MODIFY_DELETE_DEVICE    "DeleteDevice" 
#define HAG_MODIFY_CREATE_PLUGIN    "CreatePlugin" 
#define HAG_MODIFY_DELETE_PLUGIN    "DeletePlugin" 
#define HAG_MODIFY_CREATE_PLUGIN_DEVICE "CreatePluginDevice" 
#define HAG_IMPORT_UPNP_DEVICE      "ImportUpnpDevice" 
#define HAG_PROCESS_CHILD           "ProcessChildDevices" 
#define HAG_RELOAD                  "Reload" 
#define HAG_RUN_SCENE               "RunScene"
#define HAG_RUN_LUA                 "RunLua"
#define HAG_LOG_IP_REQUEST          "LogIpRequest"


HaDevice

Basic functionality for all home automation devices 

#define HADEVICE_FILE               "S_HaDevice1.xml"
#define HADEVICE_SID                "urn:micasaverde-com:serviceId:HaDevice1"
#define HADEVICE_STYPE              "urn:schemas-micasaverde-com:service:HaDevice:1"

Variables 

#define HAD_ENERGY_LOG              "EnergyLog"         // DEVICEDATA_Energy_Log_CONST
#define HAD_IOPORT_DEVICE           "IODevice"          // The device number to connect to for IO (this is on the master device)
#define HAD_IOPORT_DEVICE_XREF      "IODeviceXRef"      // On the port, this is the device number that connects to it
#define HAD_IOPORT_MAX_TIME         "MaxTime"           // The maximum time to leave the socket open before closing and re-opening
#define HAD_IOPORT_PORT             "IOPort"            // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
#define HAD_IOPORT_PATH             "IOPortPath"        // Read-only, created at each boot, has the current path to the port
#define HAD_IGNORE_ROOM             "IgnoreRoom"        // DEVICEDATA_Room_Not_Required_CONST
#define HAD_COMM_FAILURE            "CommFailure"
#define HAD_POLLING_ENABLED         "PollingEnabled"
#define HAD_POLL_MIN_DELAY          "PollMinDelay"
#define HAD_CONFIGURED              "Configured"
#define HAD_JOBID                   "JobID"
#define HAD_REVERSE                 "ReverseOnOff"      // DEVICEDATA_Reverse_CONST
#define HAD_LAST_UPDATE             "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define HAD_LAST_ACTIVITY           "LastActivity"      // Used by the OPower plugin
#define HAD_AUTO_CONFIGURE          "AutoConfigure"     // DEVICEDATA_Auto_Configure_CONST
#define HAD_LAST_TIME_CHECK         "LastTimeCheck"     // Only for devices that are capable of implementing time this is when the time was last checked
#define HAD_LAST_TIME_OFFSET        "LastTimeOffset"    // For HAD_LAST_TIME_CHECK this is the timezone offset from UTC when the time was last checked
#define HAD_FIRST_CONFIGURED        "FirstConfigured"   // The date this was first configured
#define HAD_BATTERY_LEVEL           "BatteryLevel"      // DEVICEDATA_Battery_Level_CONST
#define HAD_BATTERY_DATE            "BatteryDate"       // The date when the battery level was reported
#define HAD_BATTERY_ALARM           "BatteryAlarm"      // DEVICEDATA_Battery_Alarm_CONST
#define HAD_DOCUMENTATION           "Documentation"  
#define HAD_ALARM                   "sl_Alarm"

Actions 

#define HAD_RECONFIGURE             "Reconfigure"
#define HAD_REMOVE                  "Remove"
#define HAD_POLL                    "Poll"
#define HAD_SET_POLL_FREQUENCY      "SetPollFrequency"
#define HAD_STRESS_TEST             "StressTest"
#define HAD_TOGGLE_STATE            "ToggleState"


ZWaveNetwork

Basic functionality for all ZWave devices 

#define ZWN_FILE                    "S_ZWaveNetwork1.xml"
#define ZWN_SID                     "urn:micasaverde-com:serviceId:ZWaveNetwork1"
#define ZWN_STYPE                   "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"

#define ZWN_RESET_NETWORK           "ResetNetwork"
#define ZWN_RECONFIGURE_ALL         "ReconfigureAllNodes"
#define ZWN_REMOVE_NODES            "RemoveNodes"
#define ZWN_ADD_NODES               "AddNodes"
#define ZWN_DOWNLOAD                "DownloadNetwork"
#define ZWN_HEAL_NETWORK            "HealNetwork"
#define ZWN_UPDATE_NETWORK          "UpdateNetwork"
#define ZWN_UPDATE_NEIGHBORS        "UpdateNeighbors"
#define ZWN_SET_POLLING             "SetPolling"
#define ZWN_SEND_DATA               "SendData"
#define ZWN_POLL_ALL_NODES          "PollAllNodes"
#define ZWN_SOFT_RESET              "SoftReset"
#define ZWN_BACKUP_DONGLE           "BackupDongle"
#define ZWN_SCENE_IDS               "SceneIDs"          // For scene controllers, node#-button#=ZWaveSceneID,...
#define ZWN_PUT_BYTE                "PutByte"

Variables 

#define ZWN_LAST_UPDATE             "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_HEAL               "LastHeal"          // DEVICEDATA_LastUpdate_CONST
#define ZWN_ROUTE_FAILURE           "LastRouteFailure"  // DEVICEDATA_LastUpdate_CONST
#define ZWN_LAST_DONGLE_BACKUP      "LastDongleBackup"
#define ZWN_NET_STATUS_ID           "NetStatusID"  
#define ZWN_NET_STATUS_TEXT         "NetStatusText"  
#define ZWN_COM_PORT                "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define ZWN_LOCK_COM_PORT           "LockComPort"  
#define ZWN_NODE_ID                 "NodeID"            // The dongle's id
#define ZWN_VERSION_INFO            "VersionInfo"
#define ZWN_HOME_ID                 "HomeID"
#define ZWN_ROLE                    "Role"
#define ZWN_RESET_MODE              "ResetMode"
#define ZWN_INCLUSION_MODE          "InclusionMode"
#define ZWN_NODETYPE                "NodeType"
#define ZWN_TIMEOUT                 "Timeout"
#define ZWN_MULTIPLE                "Multiple"
#define ZWN_SIMULATE_INCOMING       "SimulateIncomingData"
#define ZWN_POLL_ENABLED            "PollingEnabled"
#define ZWN_POLL_DELAY_INITIAL      "PollDelayInitial"
#define ZWN_POLL_DELAY_DEADTIME     "PollDelayDeadTime"
#define ZWN_POLL_MINDELAY           "PollMinDelay"
#define ZWN_POLL_FREQUENCY          "PollFrequency"
#define ZWN_LAST_ERROR              "LastError"
#define ZWN_DELAY_PROCESSING        "DelayProcessing"
#define ZWN_FAILED_ONLY             "FailedOnly"
#define ZWN_USE_45                  "Use45"
#define ZWN_USE_MR                  "UseMR"
#define ZWN_TO_3066                 "TO3066"            // indicates when we're going to work around the TO3066 issue
#define ZWN_LIMIT_NEIGHBORS         "LimitNeighbors"    // indicates when we figure manual routing, only consider Z-Wave's neighbors as valid options


ZWaveDevice

Basic functionality for all ZWave devices 

#define ZWDEVICE_FILE               "S_ZWaveDevice1.xml"
#define ZWDEVICE_SID                "urn:micasaverde-com:serviceId:ZWaveDevice1"
#define ZWDEVICE_STYPE              "urn:schemas-micasaverde-com:service:ZWaveDevice:1"

Variables 

#define ZWD_POLL_SETTINGS           "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define ZWD_POLL_COMMANDS           "PollCommands"      // A comma-separated list of command classes/commands to poll.  X means the device won't respond to any poll
#define ZWD_MULTCH_ENDPOINT         "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define ZWD_MULTCH_CAPABIL          "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST

#define ZWD_NEIGHBORS               "Neighbors"         // DEVICEDATA_Neighbors_to_Call_CONST
#define ZWD_NEIGHBORS_INVERSE       "NeighborsInverse"  // Which neighbors see us
#define ZWD_CAPABILITIES            "Capabilities"      // DEVICEDATA_Capabilities_CONST
#define ZWD_SECURITY_FAILED         "SecurityFailed"    // Don't talk to this node with security even if it reports it can
#define ZWD_CONFIG                  "Configuration"     // DEVICEDATA_Configuration_CONST
#define ZWD_LAST_RESET              "LastReset"         // DEVICEDATA_Last_Reset_CONST
#define ZWD_SCENES_AS_EVENTS        "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
#define ZWD_SCENES_TIMESTAMPS       "ScenesTimestamp"   // DEVICEDATA_Scenes_CONST
#define ZWD_WAKEUP_INTERVAL         "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
#define ZWD_LAST_WAKEUP             "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
#define ZWD_LAST_ROUTE_UPD          "LastRouteUpdate"   // DEVICEDATA_Last_Route_Update_CONST
#define ZWD_HEALTH                  "Health"            // A rating from 0-5
#define ZWD_HEALTH_DATE             "HealthDate"        // The date the rating was assigned
#define ZWD_VARIABLES_GET           "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
#define ZWD_VARIABLES_SET           "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
#define ZWD_ASSOCIATION_GET         "AssociationGet"    // DEVICEDATA_Association_Get_CONST
#define ZWD_ASSOCIATION_SET         "AssociationSet"    // DEVICEDATA_Association_Set_CONST
#define ZWD_ASSOCIATION_NUM         "AssociationNum"
#define ZWD_NONCE_ACK               "NonceACK"
#define ZWD_MANUF_INFO              "ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define ZWD_VERSION_INFO            "VersionInfo"       // DEVICEDATA_Configuration_CONST
#define ZWD_SETPOINT_INFO           "SetPointInfo" 
#define ZWD_NODE_INFO               "NodeInfo"          // The Z-Wave node info frame
#define ZWD_INITIAL_NAME            "InitialName"       // The name that was initially set when the node was first added
#define ZWD_CONFIGURED_NAME         "ConfiguredName"    // The user-specified name when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_CONFIGURED_VARIABLE     "ConfiguredVariable" // The user-specified VariablesSet when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_CONFIGURED_ASSOC        "ConfiguredAssoc"   // The user-specified AssociationSet when we configured the node.  We won't need to set the name unless this has changed
#define ZWD_DOCUMENTATION           "Documentation"     // For the Z-Wave options page
#define ZWD_METER_TYPE              "MeterType"
#define ZWD_METER_SCALE             "MeterScale"
#define ZWD_ALARM_TYPE              "AlarmType"
#define ZWD_POLL_OK                 "PollOk"
#define ZWD_POLL_TX_FAIL            "PollTxFail"
#define ZWD_POLL_NO_REPLY           "PollNoReply"
#define ZWD_MANUAL_ROUTE            "ManualRoute"       // A route specified by an end-user
#define ZWD_ALL_ROUTES_FAILED       "AllRoutesFailed"
#define ZWD_AUTO_ROUTE              "AutoRoute"         // A route chosen by profilings


InsteonNetwork

Basic functionality for all Insteon devices 

#define INN_FILE                "S_InsteonNetwork1.xml"
#define INN_SID                 "urn:micasaverde-com:serviceId:InsteonNetwork1"
#define INN_STYPE               "urn:schemas-micasaverde-org:service:InsteonNetwork:1"

Actions 

#define INN_RESET_NETWORK       "ResetNetwork"
#define INN_REMOVE_NODES        "RemoveNodes"
#define INN_ADD_NODES           "AddNodes"
#define INN_STOP_ADDREM_NODES   "StopAddRemoveNodes"
#define INN_SEND_DATA           "SendData"

Variables 

#define INN_COM_PORT            "ComPort"           // DEVICEDATA_COM_Port_on_PC_CONST
#define INN_LOCK_COM_PORT       "LockComPort"  
#define INN_LAST_ERROR          "LastError"
#define INN_LAST_UPDATE         "LastUpdate"        // DEVICEDATA_LastUpdate_CONST
#define INN_NET_STATUS_ID       "NetStatusID"  
#define INN_NET_STATUS_TEXT     "NetStatusText"  
#define INN_POLL_ENABLED        "PollingEnabled"
#define INN_POLL_DELAY_INITIAL  "PollDelayInitial"
#define INN_POLL_DELAY_DEADTIME "PollDelayDeadTime"
#define INN_POLL_MINDELAY       "PollMinDelay"
#define INN_POLL_FREQUENCY      "PollFrequency"
#define INN_NODE_ID             "NodeID"            // The dongle's id
#define INN_SL_X10_CODE         "sl_X10Code"

InsteonDevice

Basic functionality for all Insteon devices 

#define INDEVICE_FILE           "S_InsteonDevice1.xml"
#define INDEVICE_SID            "urn:micasaverde-com:serviceId:InsteonDevice1"
#define INDEVICE_STYPE          "urn:schemas-micasaverde-com:service:InsteonDevice:1"

Variables 

#define IND_POLL_SETTINGS       "PollSettings"      // DEVICEDATA_Polling_Settings_CONST
#define IND_MULTCH_ENDPOINT     "MultiChEndpoint"   // DEVICEDATA_Multi_Channel_End_Point_CONST
#define IND_MULTCH_CAPABIL      "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST

#define IND_NEIGHBORS           "Neighbors"         // DEVICEDATA_Neighbors_to_Call_CONST
#define IND_CAPABILITIES        "Capabilities"      // DEVICEDATA_Capabilities_CONST
#define IND_CONFIG              "Configuration"     // DEVICEDATA_Configuration_CONST
#define IND_LAST_RESET          "LastReset"         // DEVICEDATA_Last_Reset_CONST
#define IND_SCENES_AS_EVENTS    "ScenesAsEvents"    // DEVICEDATA_Scenes_As_Events_CONST
#define IND_WAKEUP_INTERVAL     "WakeupInterval"    // DEVICEDATA_Wakeup_Interval_CONST
#define IND_LAST_WAKEUP         "LastWakeup"        // DEVICEDATA_Last_Wakeup_CONST
#define IND_LAST_ROUTE_UPD      "LastRouteUpdate"   // DEVICEDATA_Last_Route_Update_CONST
#define IND_VARIABLES_GET       "VariablesGet"      // DEVICEDATA_Variables_Get_CONST
#define IND_VARIABLES_SET       "VariablesSet"      // DEVICEDATA_Variables_Set_CONST
#define IND_ASSOCIATION_GET     "AssociationGet"    // DEVICEDATA_Association_Get_CONST
#define IND_ASSOCIATION_SET     "AssociationSet"    // DEVICEDATA_Association_Set_CONST
#define IND_MANUF_INFO          "ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define IND_VERSION_INFO        "VersionInfo"       // DEVICEDATA_Configuration_CONST
#define IND_UPDATED_NAME        "UpdatedName"       // DEVICEDATA_Update_Name_CONST

USB UIRT

Basic functionality for USB UIRT 

#define UIRT_FILE               "S_USBUIRT.xml"
#define UIRT_SID                "urn:micasaverde-com:serviceId:USBUIRT1"
#define UIRT_TYPE               "urn:schemas-micasaverde-com:service:USBUIRT:1"

Variables 

#define UIRT_COM_PORT           "ComPort"

Camera

Basic functionality for all Cameras 

#define CAMDEVICE_FILE          "S_Camera1.xml"
#define CAMDEVICE_SID           "urn:micasaverde-com:serviceId:Camera1"
#define CAMDEVICE_STYPE         "urn:schemas-micasaverde-com:service:Camera:1"

Variables 

#define CAM_USERNAME            "Username"          // DEVICEDATA_AuthUser_CONST
#define CAM_PASSWORD            "Password"          // DEVICEDATA_AuthPassword_CONST

#define CAM_RELATED_SENSORS     "RelatedSensors"    // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
#define CAM_SENSOR_ARCHIVE_SEC  "SensorArchiveSeconds"   // Integer: And after the sensor(s) are tripped archive the video for  seconds.
#define CAM_RELATED_LIGHTS      "RelatedLights"     // Comma separated list: Which lights should be turned on when viewing this camera:
#define CAM_LIGHT_OPTIONS       "LightOptions"      // V=When I view the camera from the web or phone.
                                                    // S=When the sensor(s) above are tripped and they are armed
                                                    // B=When the sensors above are tripped and they are *not* armed
                                                    // A=When you take an automatic picture for the archive
                                                    // So: VSBA means do them all

#define CAM_AUTO_ARCH_SEC       "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds
#define CAM_AUTO_PRES_DAYS      "AutoArchivePreserveDays" // and keep the pictures x days
#define CAM_URL                 "URL"               // DEVICEDATA_Path_CONST
#define CAM_DIRECT_URL          "DirectStreamingURL"
#define CAM_TIMEOUT             "Timeout"

PanTiltZoom

For Cameras

  1. define PTZ_FILE "S_PanTiltZoom1.xml"
  2. define PTZ_SID "urn:micasaverde-com:serviceId:PanTiltZoom1"
  3. define PTZ_STYPE "urn:schemas-micasaverde-com:service:PanTiltZoom:1"

Actions

  1. define PTZ_LEFT "MoveLeft"
  2. define PTZ_RIGHT "MoveRight"
  3. define PTZ_UP "MoveUp"
  4. define PTZ_DOWN "MoveDown"
  5. define PTZ_IN "ZoomIn"
  6. define PTZ_OUT "ZoomOut"

SwitchPower1

  1. define SWP_SID "urn:upnp-org:serviceId:SwitchPower1"

Actions

  1. define SWP_SET_TARGET "SetTarget"

Variables

  1. define SWP_STATUS "Status"
  2. define SWP_TARGET "Target"

S_WindowCovering1

  1. define WC_SID "urn:upnp-org:serviceId:WindowCovering1"

Actions

  1. define WC_UP "Up"
  2. define WC_DOWN "Down"
  3. define WC_STOP "Stop"

Variables

  1. define WC_STATUS "Status"
  2. define WC_TARGET "Target"

Dimming1

  1. define SWD_SID "urn:upnp-org:serviceId:Dimming1"

Actions

  1. define SWD_SET_LOAD_LEVEL "SetLoadLevelTarget"

Variables

  1. define SWD_LOAD_LEVEL_STATUS "LoadLevelStatus"
  2. define SWD_LOAD_LEVEL_TARGET "LoadLevelTarget"

DoorLock1

  1. define DL_SID "urn:micasaverde-com:serviceId:DoorLock1"

Actions

  1. define DL_SET_TARGET "SetTarget"
  2. define DL_SET_PIN "SetPin"
  3. define DL_CLEAR_PIN "ClearPin"
  4. define DL_SET_PIN_DATE "SetPinValidityDate"
  5. define DL_SET_PIN_WEEK "SetPinValidityWeekly"
  6. define DL_CLEAR_PIN_VALID "ClearPinValidity"

Variables

  1. define DL_STATUS "Status"
  2. define DL_TARGET "Target"
  3. define DL_MIN_PIN_SIZE "MinPinSize"
  4. define DL_MAX_PIN_SIZE "MaxPinSize"
  5. define DL_KEEP_PIN_CODES "KeepPinCodes"
  6. define DL_SL_USER_CODE "sl_UserCode"
  7. define DL_SL_PIN_FAILED "sl_PinFailed"
  8. define DL_SL_LOCK_BUTTON "sl_LockButton"
  9. define DL_SL_LOCK_FAILURE "sl_LockFailure"
  10. define DL_SL_UNAUTH_USER "sl_UnauthUser"
  11. define DL_SL_LOW_BATTERY "sl_LowBattery"
  12. define DL_SL_VERY_LOW_BATTERY "sl_VeryLowBattery"
  13. define DL_SL_CODE_CHANGED "sl_CodeChanged"
  1. define DL_PIN_CODES "PinCodes" // DEVICEDATA_PIN_Codes_CONST
  2. define DL_NUM_SCHEDULES "NumSchedules" // DEVICEDATA_PIN_Codes_CONST

HVAC_UserOperatingMode1

  1. define HVACO_SID "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"

Actions

  1. define HVACO_SET_MODE "SetModeTarget"

Variables

  1. define HVACO_TARGET "ModeTarget"
  2. define HVACO_STATUS "ModeStatus"

HVAC_OperatingState1

  1. define HVACS_SID "urn:micasaverde-com:serviceId:HVAC_OperatingState1"

Variables

  1. define HVACS_STATE "ModeState"
  2. define HVACS_STATE_ENERGY "ModeStateForEnergy"

HVAC_FanOperatingMode1

  1. define HVACF_SID "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"

Actions

  1. define HVACF_SET_MODE "SetMode"

Variables

  1. define HVACF_STATUS "Mode"


TemperatureSetpoint1_Heat/Cool

  1. define HVACHEAT_SID "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
  2. define HVACCOOL_SID "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"

Actions

  1. define HVACHC_SETPOINT "SetCurrentSetpoint"

Variables

  1. define HVACHC_CURRENTSP "CurrentSetpoint"
  2. define HVACHC_SETPOINT_TARGET "SetpointTarget"

TemperatureSensor1

  1. define TEMP_SID "urn:upnp-org:serviceId:TemperatureSensor1"

Variables

  1. define TEMP_CURRENT "CurrentTemperature"

LightSensor1

  1. define LIGHT_SID "urn:micasaverde-com:serviceId:LightSensor1"

Variables

  1. define LIGHT_CURRENT "CurrentLevel"

HumiditySensor1

  1. define HUM_SID "urn:micasaverde-com:serviceId:HumiditySensor1"

Variables

  1. define HUM_CURRENT "CurrentLevel"

SecuritySensor1

  1. define SES_SID "urn:micasaverde-com:serviceId:SecuritySensor1"

Variables

  1. define SES_ARMED "Armed"
  2. define SES_TRIPPED "Tripped"
  3. define SES_LAST_TRIP "LastTrip"

Action

  1. define SES_SET_ARMED "SetArmed"

EnergyMetering1

  1. define ENE_SID "urn:micasaverde-com:serviceId:EnergyMetering1"

Actions

  1. define ENE_RESETKWH "ResetKWH" // Reset Kwh

Variables

  1. define ENE_KWH "KWH"
  2. define ENE_KWH_READING "KWHReading" // The time it was last read
  3. define ENE_KVARH "kVARh"
  4. define ENE_KVAR "kVAR"
  5. define ENE_WATTS "Watts"
  6. define ENE_PULSE "Pulse"
  7. define ENE_ACTUAL "ActualUsage"
  8. define ENE_USER_SUPPLIED "UserSuppliedWattage"
  9. define ENE_WHOLE_HOUSE "WholeHouse"
  10. define ENE_LOG "Log"

IrTransmitter1

  1. define IRT_SID "urn:micasaverde-com:serviceId:IrTransmitter1"

Variables

  1. define IRT_SENDPRONTO "SendProntoCode"


SerialPort1

  1. define SPT_SID "urn:micasaverde-org:serviceId:SerialPort1"

Variables

  1. define SPT_BAUD "baud"
  2. define SPT_VENDOR "vendor"
  3. define SPT_PRODUCT "product"
  4. define SPT_PATH "path"

SceneController1

  1. define SCR_SID "urn:micasaverde-com:serviceId:SceneController1"

Variables

  1. define SCR_SL_SCENE_ACTIVATED "sl_SceneActivated"
  2. define SCR_SL_SCENE_DEACTIVATED "sl_SceneDeactivated"
  3. define SCR_SCENES "Scenes"
  4. define SCR_LAST_SCENE_ID "LastSceneID"
  5. define SCR_LAST_SCENE_TIME "LastSceneTime"
  6. define SCR_MANAGE_LEDS "ManageLeds"
  7. define SCR_NUM_BUTTONS "NumButtons"
  8. define SCR_FIRES_OFF_EVENTS "FiresOffEvents"
  9. define SCR_SCENE_SHORTCUTS "SceneShortcuts"
  10. define SCR_ACTIVATION_METHOD "ActivationMethod" // 1=BASIC_SET only (ignore scene_activate) 2=SCENE_ACTIVATE only (ignore basic set). 0=anything goes

SceneControllerLED1

  1. define SCL_SID "urn:micasaverde-com:serviceId:SceneControllerLED1"

Actions

  1. define SCL_SET_LIGHT "SetLight"

Variables

  1. define SCL_LIGHT_SETTINGS "LightSettings"

GenericIO

  1. define GIO_SID "urn:micasaverde-com:serviceId:GenericIO"

Variables

  1. define GIO_IS_INPUT "IsInput" // DEVICEDATA_InputOrOutput_CONST, 1 if it's input
  2. define GIO_DEFAULT_STATE "DefaultState" // DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed

IR

  1. define IR_SID "urn:micasaverde-com:serviceId:IrDevice1"
  1. define IR_SEND_CODE "SendCode"

Variables

  1. define IR_CODESETS "Codesets"
  2. define IR_CODESET "Codeset"
  3. define IR_REMOTE "Remote"
  4. define IR_MFRID "MfrId"
Retrieved from "http://wiki.mios.com/index.php?title=Luup_UPNP_Files&oldid=3578"
Personal tools