Luup UPNP Files

The following is the contents of the file "Constant.h" which defines the strings used for file device types, services, actions, variables, etc.

/

#ifndef Constants_h
#define Constants_h

// Device Types
#define DEVICETYPE_BINARY_LIGHT			"urn:schemas-upnp-org:device:BinaryLight:1"
#define DEVICETYPE_DIMMABLE_LIGHT		"urn:schemas-upnp-org:device:DimmableLight:1"
#define DEVICETYPE_THERMOSTAT			"urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1"
#define DEVICETYPE_HUMIDITY_SENSOR		"urn:schemas-micasaverde-com:device:HumiditySensor:1"
#define DEVICETYPE_MULTI_IO				"urn:schemas-micasaverde-com:device:MultiIO:1"
#define DEVICETYPE_DOOR_LOCK			"urn:schemas-micasaverde-com:device:DoorLock:1"
#define DEVICETYPE_DOOR_SENSOR			"urn:schemas-micasaverde-com:device:DoorSensor:1"
#define DEVICETYPE_ZWAVE_NETWORK		"urn:schemas-micasaverde-com:device:ZWaveNetwork:1"
#define DEVICETYPE_INSTEON_NETWORK		"urn:schemas-micasaverde-com:device:InsteonNetwork:1"
#define DEVICETYPE_TEMPERATURE_SENSOR	"urn:schemas-micasaverde-com:device:TemperatureSensor:1"
#define DEVICETYPE_MOTION_SENSOR		"urn:schemas-micasaverde-com:device:MotionSensor:1"
#define DEVICETYPE_LIGHT_SENSOR			"urn:schemas-micasaverde-com:device:LightSensor:1"
#define DEVICETYPE_IR_TRANSMITTER		"urn:schemas-micasaverde-com:device:IrTransmitter:1"
#define DEVICETYPE_WINDOW_COVERING		"urn:schemas-micasaverde-com:device:WindowCovering:1"
#define DEVICETYPE_GENERIC_IO			"urn:schemas-micasaverde-com:device:GenericIO:1"
#define DEVICETYPE_REMOTE_CONTROL		"urn:schemas-micasaverde-com:device:RemoteControl:1"
#define DEVICETYPE_COMBO_DEVICE			"urn:schemas-micasaverde-com:device:ComboDevice:1"
#define DEVICETYPE_CAMERA				"urn:schemas-upnp-org:device:DigitalSecurityCamera:1"
#define DEVICETYPE_SERIALPORT			"urn:micasaverde-org:device:SerialPort:1"
#define DEVICETYPE_SCENE_CONTROLLER		"urn:schemas-micasaverde-com:device:SceneController:1"
#define DEVICETYPE_ENERGY_CALCULATOR	"urn:schemas-micasaverde-com:device:EnergyCalculator:1"
// IR Device Types
#define DEVICETYPE_TV					"urn:schemas-micasaverde-com:device:tv:1"
#define DEVICETYPE_CABLE				"urn:schemas-micasaverde-com:device:cable:1"
#define DEVICETYPE_SATELLITE			"urn:schemas-micasaverde-com:device:satellite:1"
#define DEVICETYPE_VIDEO_ACCESSORY		"urn:schemas-micasaverde-com:device:videoaccessory:1"
#define DEVICETYPE_VCR_DVR				"urn:schemas-micasaverde-com:device:vcrdvd:1"
#define DEVICETYPE_DVD_BLURAY			"urn:schemas-micasaverde-com:device:dvdbluray:1"
#define DEVICETYPE_RECEIVER				"urn:schemas-micasaverde-com:device:receiver:1"
#define DEVICETYPE_AMP					"urn:schemas-micasaverde-com:device:amp:1"
#define DEVICETYPE_CD					"urn:schemas-micasaverde-com:device:cd:1"
#define DEVICETYPE_MISC_HOME_CONTROL	"urn:schemas-micasaverde-com:device:mischomecontrol:1"
#define DEVICETYPE_AV_MISC				"urn:schemas-micasaverde-com:device:avmisc:1

// Device Files

#define DEVICEFILE_BINARY_LIGHT			"D_BinaryLight1.xml"
#define DEVICEFILE_DIMMABLE_LIGHT		"D_DimmableLight1.xml"
#define DEVICEFILE_THERMOSTAT			"D_HVAC_ZoneThermostat1.xml"
#define DEVICEFILE_HUMIDITY_SENSOR		"D_HumiditySensor1.xml"
#define DEVICEFILE_MULTI_IO				"D_GC100.xml"
#define DEVICEFILE_DOOR_LOCK			"D_DoorLock1.xml"
#define DEVICEFILE_DOOR_SENSOR			"D_MotionSensor1.xml"
#define DEVICEFILE_ZWAVE_NETWORK		"D_ZWaveNetwork.xml"
#define DEVICEFILE_TEMPERATURE_SENSOR	"D_TemperatureSensor1.xml"
#define DEVICEFILE_MOTION_SENSOR		"D_MotionSensor1.xml"
#define DEVICEFILE_LIGHT_SENSOR			"D_LightSensor1.xml"
#define DEVICEFILE_IR_TRANSMITTER		"D_IrTransmitter1.xml"
#define DEVICEFILE_WINDOW_COVERING		"D_DimmableLight1.xml"
#define DEVICEFILE_GENERIC_IO			"D_BinaryLight1.xml"
#define DEVICEFILE_REMOTE_CONTROL		"D_BinaryLight1.xml"
#define DEVICEFILE_COMBO_DEVICE			"D_BinaryLight1.xml"
#define DEVICEFILE_CAMERA				"D_DigitalSecurityCamera1.xml"
#define DEVICEFILE_SCENE_CONTROLLER		"D_DoorLock1.xml"

// Device Categories

#define DEVICE_CATEGORY_INTERFACE		1
#define DEVICE_CATEGORY_DIMMABLE_LIGHT	2
#define DEVICE_CATEGORY_SWITCH			3
#define DEVICE_CATEGORY_SECURITY_SENSOR	4
#define DEVICE_CATEGORY_HVAC			5
#define DEVICE_CATEGORY_CAMERA			6
#define DEVICE_CATEGORY_DOOR_LOCK		7
#define DEVICE_CATEGORY_WINDOW_COV		8
#define DEVICE_CATEGORY_REMOTE_CONTROL	9
#define DEVICE_CATEGORY_IR_TX			10	
#define DEVICE_CATEGORY_GENERIC_IO		11
#define DEVICE_CATEGORY_GENERIC_SENSOR	12

// Cast the second one between int and char * so we can use a simple // array that's fast to iterate and not use an stl map extern const char *g_DeviceCategories[]; extern const char *g_DeviceDescriptions[]; // Default descriptions

// These are stored in the json file for the device itself and not part of the UPNP variables:

/* Device_Num FK_DevType Device_Num_Parent FK_Device_Category Room_Num

Description InternalID // DEVICEDATA_PortChannel_Number_CONST Manufacturer // DEVICEDATA_Manufacturer_Desc_CONST Model // DEVICEDATA_Model_Desc_CONST IPAddress MacAddress UPnPDeviceFile // DEVICEDATA_UPnP_Dev_File_CONST

/

// ============ HaGateway ============ // Basic functionality for the gateway itself

#define HAGEVICE_FILE			"S_HomeAutomationGateway1.xml"
#define HAGEVICE_SID			"urn:micasaverde-com:serviceId:HomeAutomationGateway1"
#define HAGEVICE_STYPE			"urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"

// Variables

// Actions

#define HAG_GET_USER_DATA		"GetUserData"  
#define HAG_MODIFY_USER_DATA	"ModifyUserData" 
#define HAG_MODIFY_GET_VARIABLE	"GetVariable" 
#define HAG_MODIFY_SET_VARIABLE	"SetVariable" 
#define HAG_MODIFY_GET_STATUS	"GetStatus" 
#define HAG_MODIFY_GET_ACTIONS	"GetActions" 
#define HAG_MODIFY_CREATE_DEVICE	"CreateDevice" 
#define HAG_PROCESS_CHILD		"ProcessChildDevices" 
#define HAG_RELOAD				"Reload" 
#define HAG_RUN_SCENE			"RunScene"
#define HAG_RUN_LUA				"RunLua"

// ============ HaDevice ============ // Basic functionality for all home automation devices

#define HADEVICE_FILE			"S_HaDevice1.xml"
#define HADEVICE_SID			"urn:micasaverde-com:serviceId:HaDevice1"
#define HADEVICE_STYPE			"urn:schemas-micasaverde-com:service:HaDevice:1"

// Variables

#define HAD_ENERGY_LOG			"EnergyLog"		// DEVICEDATA_Energy_Log_CONST
#define HAD_WATTS				"Watts"			// DEVICEDATA_Wattage_CONST
#define HAD_IOPORT_DEVICE		"IODevice"		// The device number to connect to for IO (this is on the master device)
#define HAD_IOPORT_PORT			"IOPort"		// The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port)
#define HAD_IGNORE_ROOM			"IgnoreRoom" 
#define HAD_COMM_FAILURE		"CommFailure"
#define HAD_POLLING_ENABLED		"PollingEnabled"
#define HAD_POLL_MIN_DELAY		"PollMinDelay"
#define HAD_CONFIGURED			"Configured"
#define HAD_JOBID				"JobID"

#define HAD_RECONFIGURE			"Reconfigure"
#define HAD_REMOVE				"Remove"
#define HAD_POLL				"Poll"
#define HAD_SET_POLL_FREQUENCY	"SetPollFrequency"

// ============ ZWaveNetwork ============ // Basic functionality for all ZWave devices

#define ZWN_FILE				"S_ZWaveNetwork1.xml"
#define ZWN_SID					"urn:micasaverde-com:serviceId:ZWaveNetwork1"
#define ZWN_STYPE				"urn:schemas-micasaverde-org:service:ZWaveNetwork:1"

#define ZWN_RESET_NETWORK		"ResetNetwork"
#define ZWN_REMOVE_NODES		"RemoveNodes"
#define ZWN_ADD_NODES			"AddNodes"
#define ZWN_DOWNLOAD			"DownloadNetwork"
#define ZWN_HEAL_NETWORK		"HealNetwork"
#define ZWN_SET_POLLING			"SetPolling"
#define ZWN_SEND_DATA			"SendData"
#define ZWN_POLL_ALL_NODES		"PollAllNodes"

// Variables

#define ZWN_LAST_UPDATE			"LastUpdate"  // DEVICEDATA_LastUpdate_CONST
#define ZWN_AUTO_CONFIGURE		"AutoConfigure"  // DEVICEDATA_Auto_Configure_CONST
#define ZWN_NET_STATUS_ID		"NetStatusID"  
#define ZWN_NET_STATUS_TEXT		"NetStatusText"  
#define ZWN_COM_PORT			"ComPort"  // DEVICEDATA_COM_Port_on_PC_CONST
#define ZWN_NODE_ID				"NodeID"  // The dongle's id
#define ZWN_VERSION_INFO		"VersionInfo"
#define ZWN_HOME_ID				"HomeID"
#define ZWN_ROLE				"Role"
#define ZWN_RESET_MODE			"ResetMode"
#define ZWN_INCLUSION_MODE		"InclusionMode"
#define ZWN_NODETYPE			"NodeType"
#define ZWN_TIMEOUT				"Timeout"
#define ZWN_MULTIPLE			"Multiple"
#define ZWN_SIMULATE_INCOMING	"SimulateIncomingData"
#define ZWN_POLL_ENABLED		"PollingEnabled"
#define ZWN_POLL_DELAY_INITIAL	"PollDelayInitial"
#define ZWN_POLL_DELAY_DEADTIME	"PollDelayDeadTime"
#define ZWN_POLL_MINDELAY		"PollMinDelay"
#define ZWN_POLL_FREQUENCY		"PollFrequency"
#define ZWN_LAST_ERROR			"LastError"

// ============ ZWaveDevice ============ // Basic functionality for all ZWave devices

#define ZWDEVICE_FILE			"S_ZWaveDevice1.xml"
#define ZWDEVICE_SID			"urn:micasaverde-com:serviceId:ZWaveDevice1"
#define ZWDEVICE_STYPE			"urn:schemas-micasaverde-com:service:ZWaveDevice:1"

// Variables

#define ZWD_LAST_UPDATE			"LastUpdate"  // DEVICEDATA_LastUpdate_CONST
#define ZWD_AUTO_CONFIGURE		"AutoConfigure"  // DEVICEDATA_Auto_Configure_CONST
#define ZWD_POLL_SETTINGS		"PollSettings"  // DEVICEDATA_Polling_Settings_CONST
#define ZWD_REVERSE				"ReverseOnOff"  // DEVICEDATA_Reverse_CONST
#define ZWD_MULTCH_ENDPOINT		"MultiChEndpoint"  // DEVICEDATA_Multi_Channel_End_Point_CONST
#define ZWD_MULTCH_CAPABIL		"MultiChCapabilities"  // DEVICEDATA_Multi_Channel_Capabilities_CONST

// ZWD_MULTCH_ENDPOINT string m_sMultiChannelList, // If m_cProtocolVersion>=2 (multi channel), then If this has embedded devices, Format: [number of end points] , [0/1 end points are dynamic], [0/1 end points are identical] // If m_cProtocolVersion<2 (multi instance), then the total number of instances // ZWD_MULTCH_CAPABIL m_sMultiChannelCapability; // m_cProtocolVersion>=2, if this has devices, Format: [end point #], Generic device class, Specific device class, command class 1, command class 2.... \n repeat next end point // If m_cProtocolVersion<2, command class, # of instances \n repeat command class

#define ZWD_NEIGHBORS			"Neighbors"  // DEVICEDATA_Neighbors_to_Call_CONST
#define ZWD_CAPABILITIES		"Capabilities"  // DEVICEDATA_Capabilities_CONST
#define ZWD_CONFIG				"Configuration"  // DEVICEDATA_Configuration_CONST
#define ZWD_LAST_RESET			"LastReset"  // DEVICEDATA_Last_Reset_CONST
#define ZWD_SCENES_AS_EVENTS	"ScenesAsEvents"  // DEVICEDATA_Scenes_As_Events_CONST
#define ZWD_SCENES				"Scenes"  // DEVICEDATA_Scenes_CONST
#define ZWD_WAKEUP_INTERVAL		"WakeupInterval"  // DEVICEDATA_Wakeup_Interval_CONST
#define ZWD_PIN_CODES			"PinCodes"  // DEVICEDATA_PIN_Codes_CONST
#define ZWD_BATTERY_LEVEL		"BatteryLevel"  // DEVICEDATA_Battery_Level_CONST
#define ZWD_LAST_WAKEUP			"LastWakeup"  // DEVICEDATA_Last_Wakeup_CONST
#define ZWD_LAST_ROUTE_UPD		"LastRouteUpdate"  // DEVICEDATA_Last_Route_Update_CONST
#define ZWD_VARIABLES_GET		"VariablesGet"  // DEVICEDATA_Variables_Get_CONST
#define ZWD_VARIABLES_SET		"VariablesSet"  // DEVICEDATA_Variables_Set_CONST
#define ZWD_ASSOCIATION_GET		"AssociationGet"  // DEVICEDATA_Association_Get_CONST
#define ZWD_ASSOCIATION_SET		"AssociationSet"  // DEVICEDATA_Association_Set_CONST
#define ZWD_MANUF_INFO			"ManufacturerInfo"  // DEVICEDATA_Model_CONST
#define ZWD_VERSION_INFO		"VersionInfo"  // DEVICEDATA_Configuration_CONST
#define ZWD_UPDATED_NAME		"UpdatedName"  // DEVICEDATA_Update_Name_CONST

// ============ Camera ============ // Basic functionality for all Cameras

#define CAMDEVICE_FILE			"S_Camera1.xml"
#define CAMDEVICE_SID			"urn:micasaverde-com:serviceId:Camera1"
#define CAMDEVICE_STYPE			"urn:schemas-micasaverde-com:service:Camera:1"

// Variables

#define CAM_USERNAME			"Username"  // DEVICEDATA_AuthUser_CONST
#define CAM_PASSWORD			"Password"  // DEVICEDATA_AuthPassword_CONST
#define CAM_ARCHIVE_SETTINGS	"ArchiveSettings"  // DEVICEDATA_Video_settings_CONST
#define CAM_RELATED_DEVICES		"RelatedDevices"  // DEVICEDATA_sDevice_Num_Relations_For_Creat_CONST
#define CAM_URL					"URL"  // DEVICEDATA_Path_CONST

// ============ PanTiltZoom ============ // For Cameras

#define PTZ_FILE				"S_PanTiltZoom1.xml"
#define PTZ_SID					"urn:micasaverde-com:serviceId:PanTiltZoom1"
#define PTZ_STYPE				"urn:schemas-micasaverde-com:service:PanTiltZoom:1"

// Actions

#define PTZ_LEFT				"MoveLeft"
#define PTZ_RIGHT				"MoveRight"
#define PTZ_UP					"MoveUp"
#define PTZ_DOWN				"MoveDown"
#define PTZ_IN					"ZoomIn"
#define PTZ_OUT					"ZoomOut"

// ============ SwitchPower1 ============

#define SWP_SID				"urn:upnp-org:serviceId:SwitchPower1"

// Actions

#define SWP_SET_TARGET		"SetTarget"

// Variables

#define SWP_STATUS			"Status" 
#define SWP_TARGET			"Target"

// ============ Dimming1 ============

#define SWD_SID					"urn:upnp-org:serviceId:Dimming1"

// Actions

#define SWD_SET_LOAD_LEVEL		"SetLoadLevelTarget"

// Variables

#define SWD_LOAD_LEVEL_STATUS	"LoadLevelStatus" 
#define SWD_LOAD_LEVEL_TARGET	"LoadLevelTarget"

// ============ DoorLock1 ============

#define DL_SID				"urn:micasaverde-com:serviceId:DoorLock1"

// Actions

#define DL_SET_TARGET		"SetTarget"
#define DL_SET_PIN			"SetPin"
#define DL_CLEAR_PIN		"ClearPin"

// Variables

#define DL_STATUS			"Status" 
#define DL_TARGET			"Target" 
#define DL_SL_USER_CODE		"sl_UserCode"
#define DL_SL_PIN_FAILED	"sl_PinFailed"

// ============ HVAC_UserOperatingMode1 ============

#define HVACO_SID			"urn:upnp-org:serviceId:HVAC_UserOperatingMode1"

// Actions

#define HVACO_SET_MODE		"SetModeTarget"

// Variables

#define HVACO_STATUS		"ModeStatus"

// ============ HVAC_FanOperatingMode1 ============

#define HVACF_SID			"urn:upnp-org:serviceId:HVAC_FanOperatingMode1"

// Actions

#define HVACF_SET_MODE		"SetMode"

// Variables

#define HVACF_STATUS		"ModeStatus"

// ============ TemperatureSetpoint1_Heat/Cool ============

#define HVACHEAT_SID		"urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
#define HVACCOOL_SID		"urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"

// Variables

#define HVACHC_SETPOINT		"SetCurrentSetpoint"

// Variables

#define HVACHC_CURRENTSP		"CurrentSetpoint"

// ============ TemperatureSensor1 ============

#define TEMP_SID		"urn:upnp-org:serviceId:TemperatureSensor1"

// Variables

#define TEMP_CURRENT	"CurrentTemperature"

// ============ LightSensor1 ============

#define LIGHT_SID		"urn:micasaverde-com:serviceId:LightSensor1"

// Variables

#define LIGHT_CURRENT	"CurrentLevel"

// ============ HumiditySensor1 ============

#define HUM_SID		"urn:micasaverde-com:serviceId:HumiditySensor1"

// Variables

#define HUM_CURRENT	"CurrentLevel"

// ============ MotionSensor1 ============

#define MOT_SID		"urn:micasaverde-com:serviceId:MotionSensor1"

// Variables

#define MOT_ARMED	"Armed"
#define MOT_TRIPPED	"Tripped"

// ============ EnergyMetering1 ============

#define ENE_SID		"urn:micasaverde-com:serviceId:EnergyMetering1"

// Variables

#define ENE_KWH				"KWH"
#define ENE_WATT			"Watt"
#define ENE_ACTUAL			"ActualUsage"
#define ENE_USER_SUPPLIED	"UserSuppliedWattage"

// ============ IrTransmitter1 ============

#define IRT_SID		"urn:micasaverde-com:serviceId:IrTransmitter1"

// Variables

#define IRT_SENDPRONTO	"SendProntoCode"

// ============ SerialPort1 ============

#define SPT_SID		"urn:micasaverde-org:serviceId:SerialPort1"

// Variables

#define SPT_BAUD	"baud"

// ============ SceneController1 ============

#define SCR_SID					"urn:micasaverde-com:serviceId:SceneController1"

// Variables

#define SCR_SL_BUTTON_PRESSED	"sl_SceneButtonPressed"

#endif

Luup UPNP Files

Views

Personal tools

Navigation

Search

Toolbox