Cooper Aspire Remote

From MiOS
(Difference between revisions)
Jump to: navigation, search
(Created page with "These instructions are for the Cooper Aspire Handheld remote. If you have previously been using the remote you should probably do a factory reset. Press 'Menu', choose 'Setting...")
 
 
Line 1: Line 1:
 +
[[Category:Hardware]]
 
These instructions are for the Cooper Aspire Handheld remote.
 
These instructions are for the Cooper Aspire Handheld remote.
  

Latest revision as of 03:03, 15 June 2013

These instructions are for the Cooper Aspire Handheld remote.

If you have previously been using the remote you should probably do a factory reset. Press 'Menu', choose 'Settings', choose 'Reset', and then press the Menu button again which is now marked 'Reset'.

First put Vera into include mode, such as pressing the '+' button, or choose Devices, Add Devices, add Z-Wave devices, option 1.

Next, to include the remote in Vera's network, press 'Menu', choose 'Settings', choose 'Replicate', choose 'Receive', choose 'From unknown controller'.

Note that it appears the Cooper remote uses it's own internal mechanism for creating scenes rather than the standard Z-Wave command classes, so you may not be able to create scenes within Vera which work on the Cooper remote.

Personal tools