GE LED Settings
(Added instructions to disable LED at all times) |
m (Minor edits to correct process) |
||
| Line 19: | Line 19: | ||
3. At the Device Settings screen, click the Device Options Tab. | 3. At the Device Settings screen, click the Device Options Tab. | ||
| − | 4. At the Device Options screen, | + | 4. At the Device Options screen, click Add Configuration Setting. |
| + | |||
| + | 5. Under Configuration Settings enter the following values: | ||
<pre>'3' in the Variable field | <pre>'3' in the Variable field | ||
| Line 25: | Line 27: | ||
'1' in the Desired Value field</pre> | '1' in the Desired Value field</pre> | ||
| − | |||
| − | |||
6. Close the Device Settings screen by clicking the X. | 6. Close the Device Settings screen by clicking the X. | ||
| Line 39: | Line 39: | ||
3. At the Device Settings screen, click the Device Options Tab. | 3. At the Device Settings screen, click the Device Options Tab. | ||
| − | 4. At the Device Options screen, | + | 4. At the Device Options screen, click Add Configuration Setting. |
| + | |||
| + | 5. Under Configuration Settings enter the following values: | ||
<pre>'3' in the Variable field | <pre>'3' in the Variable field | ||
| Line 46: | Line 48: | ||
'0' in the Desired Value field | '0' in the Desired Value field | ||
</pre> | </pre> | ||
| − | |||
| − | |||
6. Close the Device Settings screen by clicking the X. | 6. Close the Device Settings screen by clicking the X. | ||
| Line 60: | Line 60: | ||
3. At the Device Settings screen, click the Device Options Tab. | 3. At the Device Settings screen, click the Device Options Tab. | ||
| − | 4. At the Device Options screen, | + | 4. At the Device Options screen, click Add Configuration Setting. |
| + | |||
| + | 5. Under Configuration Settings enter the following values: | ||
<pre>'3' in the Variable field | <pre>'3' in the Variable field | ||
| Line 67: | Line 69: | ||
'2' in the Desired Value field | '2' in the Desired Value field | ||
</pre> | </pre> | ||
| − | |||
| − | |||
6. Close the Device Settings screen by clicking the X. | 6. Close the Device Settings screen by clicking the X. | ||
Latest revision as of 01:53, 19 May 2013
Contents |
[edit] HOWTO Control LED Settings of GE Switch/Outlets
[edit] Prerequisites
- Vera hardware
- GE Switch / Outlet
- UI5 firmware
[edit] Introduction
This is a short manual on how to control the LED Settings of GE Switch/Outlets.
[edit] LED On when Switch/Outlet is On
1. Go to Vera's Dashboard (Open your Web browser and type the IP address of your Vera, or connect through mios.com.)
2. In the UI, Find the Switch/Outlet you want to modify and click the Wrench icon.
3. At the Device Settings screen, click the Device Options Tab.
4. At the Device Options screen, click Add Configuration Setting.
5. Under Configuration Settings enter the following values:
'3' in the Variable field '1 byte hex' from the Data Size drop down '1' in the Desired Value field
6. Close the Device Settings screen by clicking the X.
7. Click the red "Save" button at the top of the UI.
[edit] LED On when Switch/Outlet is Off (Default Setting)
1. Go to Vera's Dashboard (Open your Web browser and type the IP address of your Vera, or connect through mios.com.)
2. In the UI, Find the Switch/Outlet you want to modify and click the Wrench icon.
3. At the Device Settings screen, click the Device Options Tab.
4. At the Device Options screen, click Add Configuration Setting.
5. Under Configuration Settings enter the following values:
'3' in the Variable field '1 byte hex' from the Data Size drop down '0' in the Desired Value field
6. Close the Device Settings screen by clicking the X.
7. Click the red "Save" button at the top of the UI.
[edit] LED Off Always
1. Go to Vera's Dashboard (Open your Web browser and type the IP address of your Vera, or connect through mios.com.)
2. In the UI, Find the Switch/Outlet you want to modify and click the Wrench icon.
3. At the Device Settings screen, click the Device Options Tab.
4. At the Device Options screen, click Add Configuration Setting.
5. Under Configuration Settings enter the following values:
'3' in the Variable field '1 byte hex' from the Data Size drop down '2' in the Desired Value field
6. Close the Device Settings screen by clicking the X.
7. Click the red "Save" button at the top of the UI.
