Luup UPNP Files
From MiOS
(Difference between revisions)
m (→PanTiltZoom) |
m (→SwitchPower1) |
||
| Line 425: | Line 425: | ||
== SwitchPower1 == | == SwitchPower1 == | ||
| − | #define SWP_SID "urn:upnp-org:serviceId:SwitchPower1" | + | <pre>#define SWP_SID "urn:upnp-org:serviceId:SwitchPower1"</pre> |
=== Actions === | === Actions === | ||
| − | #define SWP_SET_TARGET "SetTarget" | + | <pre>#define SWP_SET_TARGET "SetTarget"</pre> |
=== Variables === | === Variables === | ||
| − | #define SWP_STATUS "Status" | + | <pre>#define SWP_STATUS "Status" |
| − | #define SWP_TARGET "Target" | + | #define SWP_TARGET "Target"</pre> |
== S_WindowCovering1 == | == S_WindowCovering1 == | ||
Revision as of 08:03, 31 August 2011
The following is the contents of the file "Constant.h" which defines the strings used for file device types, services, actions, variables, etc.
/* Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation All rights reserved. This software may not be used or distributed without express consent. */
Device Types
#define DEVICETYPE_HOME_AUTO_GATEWAY "urn:schemas-micasaverde-com:device:HomeAutomationGateway:1" #define DEVICETYPE_BINARY_LIGHT "urn:schemas-upnp-org:device:BinaryLight:1" #define DEVICETYPE_DIMMABLE_LIGHT "urn:schemas-upnp-org:device:DimmableLight:1" #define DEVICETYPE_THERMOSTAT "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1" #define DEVICETYPE_HUMIDITY_SENSOR "urn:schemas-micasaverde-com:device:HumiditySensor:1" #define DEVICETYPE_MULTI_IO "urn:schemas-micasaverde-com:device:MultiIO:1" #define DEVICETYPE_DOOR_LOCK "urn:schemas-micasaverde-com:device:DoorLock:1" #define DEVICETYPE_DOOR_SENSOR "urn:schemas-micasaverde-com:device:DoorSensor:1" #define DEVICETYPE_ZWAVE_NETWORK "urn:schemas-micasaverde-com:device:ZWaveNetwork:1" #define DEVICETYPE_ZIGBEE_NETWORK "urn:schemas-micasaverde-com:device:ZigbeeNetwork:1" #define DEVICETYPE_INSTEON_NETWORK "urn:schemas-micasaverde-com:device:InsteonNetwork:1" #define DEVICETYPE_USB_UIRT "urn:schemas-micasaverde-com:device:USBUIRT:1" #define DEVICETYPE_TEMPERATURE_SENSOR "urn:schemas-micasaverde-com:device:TemperatureSensor:1" #define DEVICETYPE_POWER_METER "urn:schemas-micasaverde-com:device:PowerMeter:1" #define DEVICETYPE_MOTION_SENSOR "urn:schemas-micasaverde-com:device:MotionSensor:1" #define DEVICETYPE_SMOKE_SENSOR "urn:schemas-micasaverde-com:device:SmokeSensor:1" #define DEVICETYPE_LIGHT_SENSOR "urn:schemas-micasaverde-com:device:LightSensor:1" #define DEVICETYPE_IR_TRANSMITTER "urn:schemas-micasaverde-com:device:IrTransmitter:1" #define DEVICETYPE_WINDOW_COVERING "urn:schemas-micasaverde-com:device:WindowCovering:1" #define DEVICETYPE_GENERIC_IO "urn:schemas-micasaverde-com:device:GenericIO:1" #define DEVICETYPE_REMOTE_CONTROL "urn:schemas-micasaverde-com:device:RemoteControl:1" #define DEVICETYPE_COMBO_DEVICE "urn:schemas-micasaverde-com:device:ComboDevice:1" #define DEVICETYPE_CAMERA "urn:schemas-upnp-org:device:DigitalSecurityCamera:1" #define DEVICETYPE_SERIALPORT "urn:micasaverde-org:device:SerialPort:1" #define DEVICETYPE_SERIALPORTROOT "urn:micasaverde-org:device:SerialPortRoot:1" #define DEVICETYPE_SCENE_CONTROLLER "urn:schemas-micasaverde-com:device:SceneController:1" #define DEVICETYPE_SCENE_CONTR_LED "urn:schemas-micasaverde-com:device:SceneControllerLED:1" #define DEVICETYPE_ENERGY_CALCULATOR "urn:schemas-micasaverde-com:device:EnergyCalculator:1" #define DEVICETYPE_TEMP_LEAK_SENSOR "urn:schemas-micasaverde-com:device:TemperatureLeakSensor:1" #define DEVICETYPE_SCENE "urn:schemas-micasaverde-com:device:Scene:1"
IR Device Types
#define DEVICETYPE_IR "urn:schemas-micasaverde-com:device:IrDevice:1" #define DEVICETYPE_TV "urn:schemas-micasaverde-com:device:tv:1" #define DEVICETYPE_CABLE "urn:schemas-micasaverde-com:device:cable:1" #define DEVICETYPE_SATELLITE "urn:schemas-micasaverde-com:device:satellite:1" #define DEVICETYPE_VIDEO_ACCESSORY "urn:schemas-micasaverde-com:device:videoaccessory:1" #define DEVICETYPE_VCR_DVR "urn:schemas-micasaverde-com:device:vcrdvd:1" #define DEVICETYPE_DVD_BLURAY "urn:schemas-micasaverde-com:device:dvdbluray:1" #define DEVICETYPE_RECEIVER "urn:schemas-micasaverde-com:device:receiver:1" #define DEVICETYPE_AMP "urn:schemas-micasaverde-com:device:amp:1" #define DEVICETYPE_CD "urn:schemas-micasaverde-com:device:cd:1" #define DEVICETYPE_MISC_HOME_CONTROL "urn:schemas-micasaverde-com:device:mischomecontrol:1" #define DEVICETYPE_AV_MISC "urn:schemas-micasaverde-com:device:avmisc:1" #define DEVICETYPE_VIRTUAL_DEVICE "urn:schemas-micasaverde-com:device:VirtualDevice:1"
Device Files
#define DEVICEFILE_BINARY_LIGHT "D_BinaryLight1.xml" #define DEVICEFILE_DIMMABLE_LIGHT "D_DimmableLight1.xml" #define DEVICEFILE_THERMOSTAT "D_HVAC_ZoneThermostat1.xml" #define DEVICEFILE_HUMIDITY_SENSOR "D_HumiditySensor1.xml" #define DEVICEFILE_MULTI_IO "D_GC100.xml" #define DEVICEFILE_DOOR_LOCK "D_DoorLock1.xml" #define DEVICEFILE_DOOR_SENSOR "D_DoorSensor1.xml" #define DEVICEFILE_ZWAVE_NETWORK "D_ZWaveNetwork.xml" #define DEVICEFILE_INSTEON_NETWORK "D_InsteonNetwork.xml" #define DEVICEFILE_USB_UIRT "D_USB_UIRT.xml" #define DEVICEFILE_TEMPERATURE_SENSOR "D_TemperatureSensor1.xml" #define DEVICEFILE_POWER_METER "D_PowerMeter1.xml" #define DEVICEFILE_MOTION_SENSOR "D_MotionSensor1.xml" #define DEVICEFILE_SMOKE_SENSOR "D_SmokeSensor1.xml" #define DEVICEFILE_LIGHT_SENSOR "D_LightSensor1.xml" #define DEVICEFILE_IR_TRANSMITTER "D_IrTransmitter1.xml" #define DEVICEFILE_IR_DEVICE "D_IrDevice1.xml" #define DEVICEFILE_WINDOW_COVERING "D_WindowCovering1.xml" #define DEVICEFILE_SERIAL_PORT_ROOT "D_SerialPortRoot1.xml" #define DEVICEFILE_GENERIC_IO "D_GenericIO1.xml" #define DEVICEFILE_REMOTE_CONTROL "D_RemoteControl1.xml" #define DEVICEFILE_COMBO_DEVICE "D_ComboDevice1.xml" #define DEVICEFILE_CAMERA "D_DigitalSecurityCamera1.xml" #define DEVICEFILE_SCENE_CONTROLLER "D_SceneController1.xml" #define DEVICEFILE_SCENE_CONTR_LED "D_SceneControllerLED1.xml" #define DEVICEFILE_ENERGY_CALCULATOR "D_EnergyCalculator1.xml" #define DEVICEFILE_AV_MISC "D_AvMisc1.xml" #define DEVICEFILE_TEMP_LEAK_SENSOR "D_TempLeakSensor1.xml" #define DEVICEFILE_AV_SCENE "D_Scene1.xml"
Device Categories
#define DEVICE_CATEGORY_INTERFACE 1 #define DEVICE_CATEGORY_DIMMABLE_LIGHT 2 #define DEVICE_CATEGORY_SWITCH 3 #define DEVICE_CATEGORY_SECURITY_SENSOR 4 #define DEVICE_CATEGORY_HVAC 5 #define DEVICE_CATEGORY_CAMERA 6 #define DEVICE_CATEGORY_DOOR_LOCK 7 #define DEVICE_CATEGORY_WINDOW_COV 8 #define DEVICE_CATEGORY_REMOTE_CONTROL 9 #define DEVICE_CATEGORY_IR_TX 10 #define DEVICE_CATEGORY_GENERIC_IO 11 #define DEVICE_CATEGORY_GENERIC_SENSOR 12 #define DEVICE_CATEGORY_SERIAL_PORT 13 #define DEVICE_CATEGORY_SCENE_CONTROLLER 14 #define DEVICE_CATEGORY_AV 15 #define DEVICE_CATEGORY_HUMIDITY 16 #define DEVICE_CATEGORY_TEMPERATURE 17 #define DEVICE_CATEGORY_LIGHT_SENSOR 18 #define DEVICE_CATEGORY_ZWAVE_INT 19 #define DEVICE_CATEGORY_INSTEON_INT 20 #define DEVICE_CATEGORY_POWER_METER 21 #define DEVICE_CATEGORY_MAX 21
Device Sub-Categories
#define DEVICE_SUBCATEGORY_NONE 0
Security
#define DEVICE_SUBCATEGORY_DOOR 1 #define DEVICE_SUBCATEGORY_LEAK 2 #define DEVICE_SUBCATEGORY_MOTION 3 #define DEVICE_SUBCATEGORY_SMOKE 4
IR
#define DEVICE_SUBCATEGORY_IRT 1 #define DEVICE_SUBCATEGORY_USBUIRT 2
HaGateway
Basic functionality for the gateway itself
#define HAGEVICE_FILE "S_HomeAutomationGateway1.xml" #define HAGEVICE_SID "urn:micasaverde-com:serviceId:HomeAutomationGateway1" #define HAGEVICE_STYPE "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"
Variables
#define HAG_ACTIVE_SCENES "ActiveScenes" #define HAG_DATAVERSION_USERDATA "DataVersionUserData" // The current data version for user_data #define HAG_DATAVERSION_STATUS "DataVersionStatus" // The current data version for lu_status
Actions
#define HAG_GET_USER_DATA "GetUserData" #define HAG_MODIFY_USER_DATA "ModifyUserData" #define HAG_MODIFY_GET_VARIABLE "GetVariable" #define HAG_MODIFY_SET_VARIABLE "SetVariable" #define HAG_MODIFY_GET_STATUS "GetStatus" #define HAG_MODIFY_GET_ACTIONS "GetActions" #define HAG_MODIFY_CREATE_DEVICE "CreateDevice" #define HAG_MODIFY_DELETE_DEVICE "DeleteDevice" #define HAG_MODIFY_CREATE_PLUGIN "CreatePlugin" #define HAG_MODIFY_DELETE_PLUGIN "DeletePlugin" #define HAG_MODIFY_CREATE_PLUGIN_DEVICE "CreatePluginDevice" #define HAG_IMPORT_UPNP_DEVICE "ImportUpnpDevice" #define HAG_PROCESS_CHILD "ProcessChildDevices" #define HAG_RELOAD "Reload" #define HAG_RUN_SCENE "RunScene" #define HAG_RUN_LUA "RunLua" #define HAG_LOG_IP_REQUEST "LogIpRequest"
HaDevice
Basic functionality for all home automation devices
#define HADEVICE_FILE "S_HaDevice1.xml" #define HADEVICE_SID "urn:micasaverde-com:serviceId:HaDevice1" #define HADEVICE_STYPE "urn:schemas-micasaverde-com:service:HaDevice:1"
Variables
#define HAD_ENERGY_LOG "EnergyLog" // DEVICEDATA_Energy_Log_CONST #define HAD_IOPORT_DEVICE "IODevice" // The device number to connect to for IO (this is on the master device) #define HAD_IOPORT_DEVICE_XREF "IODeviceXRef" // On the port, this is the device number that connects to it #define HAD_IOPORT_MAX_TIME "MaxTime" // The maximum time to leave the socket open before closing and re-opening #define HAD_IOPORT_PORT "IOPort" // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port) #define HAD_IOPORT_PATH "IOPortPath" // Read-only, created at each boot, has the current path to the port #define HAD_IGNORE_ROOM "IgnoreRoom" // DEVICEDATA_Room_Not_Required_CONST #define HAD_COMM_FAILURE "CommFailure" #define HAD_POLLING_ENABLED "PollingEnabled" #define HAD_POLL_MIN_DELAY "PollMinDelay" #define HAD_CONFIGURED "Configured" #define HAD_JOBID "JobID" #define HAD_REVERSE "ReverseOnOff" // DEVICEDATA_Reverse_CONST #define HAD_LAST_UPDATE "LastUpdate" // DEVICEDATA_LastUpdate_CONST #define HAD_LAST_ACTIVITY "LastActivity" // Used by the OPower plugin #define HAD_AUTO_CONFIGURE "AutoConfigure" // DEVICEDATA_Auto_Configure_CONST #define HAD_LAST_TIME_CHECK "LastTimeCheck" // Only for devices that are capable of implementing time this is when the time was last checked #define HAD_LAST_TIME_OFFSET "LastTimeOffset" // For HAD_LAST_TIME_CHECK this is the timezone offset from UTC when the time was last checked #define HAD_FIRST_CONFIGURED "FirstConfigured" // The date this was first configured #define HAD_BATTERY_LEVEL "BatteryLevel" // DEVICEDATA_Battery_Level_CONST #define HAD_BATTERY_DATE "BatteryDate" // The date when the battery level was reported #define HAD_BATTERY_ALARM "BatteryAlarm" // DEVICEDATA_Battery_Alarm_CONST #define HAD_DOCUMENTATION "Documentation" #define HAD_ALARM "sl_Alarm"
Actions
#define HAD_RECONFIGURE "Reconfigure" #define HAD_REMOVE "Remove" #define HAD_POLL "Poll" #define HAD_SET_POLL_FREQUENCY "SetPollFrequency" #define HAD_STRESS_TEST "StressTest" #define HAD_TOGGLE_STATE "ToggleState"
ZWaveNetwork
Basic functionality for all ZWave devices
#define ZWN_FILE "S_ZWaveNetwork1.xml" #define ZWN_SID "urn:micasaverde-com:serviceId:ZWaveNetwork1" #define ZWN_STYPE "urn:schemas-micasaverde-org:service:ZWaveNetwork:1" #define ZWN_RESET_NETWORK "ResetNetwork" #define ZWN_RECONFIGURE_ALL "ReconfigureAllNodes" #define ZWN_REMOVE_NODES "RemoveNodes" #define ZWN_ADD_NODES "AddNodes" #define ZWN_DOWNLOAD "DownloadNetwork" #define ZWN_HEAL_NETWORK "HealNetwork" #define ZWN_UPDATE_NETWORK "UpdateNetwork" #define ZWN_UPDATE_NEIGHBORS "UpdateNeighbors" #define ZWN_SET_POLLING "SetPolling" #define ZWN_SEND_DATA "SendData" #define ZWN_POLL_ALL_NODES "PollAllNodes" #define ZWN_SOFT_RESET "SoftReset" #define ZWN_BACKUP_DONGLE "BackupDongle" #define ZWN_SCENE_IDS "SceneIDs" // For scene controllers, node#-button#=ZWaveSceneID,... #define ZWN_PUT_BYTE "PutByte"
Variables
#define ZWN_LAST_UPDATE "LastUpdate" // DEVICEDATA_LastUpdate_CONST #define ZWN_LAST_HEAL "LastHeal" // DEVICEDATA_LastUpdate_CONST #define ZWN_ROUTE_FAILURE "LastRouteFailure" // DEVICEDATA_LastUpdate_CONST #define ZWN_LAST_DONGLE_BACKUP "LastDongleBackup" #define ZWN_NET_STATUS_ID "NetStatusID" #define ZWN_NET_STATUS_TEXT "NetStatusText" #define ZWN_COM_PORT "ComPort" // DEVICEDATA_COM_Port_on_PC_CONST #define ZWN_LOCK_COM_PORT "LockComPort" #define ZWN_NODE_ID "NodeID" // The dongle's id #define ZWN_VERSION_INFO "VersionInfo" #define ZWN_HOME_ID "HomeID" #define ZWN_ROLE "Role" #define ZWN_RESET_MODE "ResetMode" #define ZWN_INCLUSION_MODE "InclusionMode" #define ZWN_NODETYPE "NodeType" #define ZWN_TIMEOUT "Timeout" #define ZWN_MULTIPLE "Multiple" #define ZWN_SIMULATE_INCOMING "SimulateIncomingData" #define ZWN_POLL_ENABLED "PollingEnabled" #define ZWN_POLL_DELAY_INITIAL "PollDelayInitial" #define ZWN_POLL_DELAY_DEADTIME "PollDelayDeadTime" #define ZWN_POLL_MINDELAY "PollMinDelay" #define ZWN_POLL_FREQUENCY "PollFrequency" #define ZWN_LAST_ERROR "LastError" #define ZWN_DELAY_PROCESSING "DelayProcessing" #define ZWN_FAILED_ONLY "FailedOnly" #define ZWN_USE_45 "Use45" #define ZWN_USE_MR "UseMR" #define ZWN_TO_3066 "TO3066" // indicates when we're going to work around the TO3066 issue #define ZWN_LIMIT_NEIGHBORS "LimitNeighbors" // indicates when we figure manual routing, only consider Z-Wave's neighbors as valid options
ZWaveDevice
Basic functionality for all ZWave devices
#define ZWDEVICE_FILE "S_ZWaveDevice1.xml" #define ZWDEVICE_SID "urn:micasaverde-com:serviceId:ZWaveDevice1" #define ZWDEVICE_STYPE "urn:schemas-micasaverde-com:service:ZWaveDevice:1"
Variables
#define ZWD_POLL_SETTINGS "PollSettings" // DEVICEDATA_Polling_Settings_CONST #define ZWD_POLL_COMMANDS "PollCommands" // A comma-separated list of command classes/commands to poll. X means the device won't respond to any poll #define ZWD_MULTCH_ENDPOINT "MultiChEndpoint" // DEVICEDATA_Multi_Channel_End_Point_CONST #define ZWD_MULTCH_CAPABIL "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST #define ZWD_NEIGHBORS "Neighbors" // DEVICEDATA_Neighbors_to_Call_CONST #define ZWD_NEIGHBORS_INVERSE "NeighborsInverse" // Which neighbors see us #define ZWD_CAPABILITIES "Capabilities" // DEVICEDATA_Capabilities_CONST #define ZWD_SECURITY_FAILED "SecurityFailed" // Don't talk to this node with security even if it reports it can #define ZWD_CONFIG "Configuration" // DEVICEDATA_Configuration_CONST #define ZWD_LAST_RESET "LastReset" // DEVICEDATA_Last_Reset_CONST #define ZWD_SCENES_AS_EVENTS "ScenesAsEvents" // DEVICEDATA_Scenes_As_Events_CONST #define ZWD_SCENES_TIMESTAMPS "ScenesTimestamp" // DEVICEDATA_Scenes_CONST #define ZWD_WAKEUP_INTERVAL "WakeupInterval" // DEVICEDATA_Wakeup_Interval_CONST #define ZWD_LAST_WAKEUP "LastWakeup" // DEVICEDATA_Last_Wakeup_CONST #define ZWD_LAST_ROUTE_UPD "LastRouteUpdate" // DEVICEDATA_Last_Route_Update_CONST #define ZWD_HEALTH "Health" // A rating from 0-5 #define ZWD_HEALTH_DATE "HealthDate" // The date the rating was assigned #define ZWD_VARIABLES_GET "VariablesGet" // DEVICEDATA_Variables_Get_CONST #define ZWD_VARIABLES_SET "VariablesSet" // DEVICEDATA_Variables_Set_CONST #define ZWD_ASSOCIATION_GET "AssociationGet" // DEVICEDATA_Association_Get_CONST #define ZWD_ASSOCIATION_SET "AssociationSet" // DEVICEDATA_Association_Set_CONST #define ZWD_ASSOCIATION_NUM "AssociationNum" #define ZWD_NONCE_ACK "NonceACK" #define ZWD_MANUF_INFO "ManufacturerInfo" // DEVICEDATA_Model_CONST #define ZWD_VERSION_INFO "VersionInfo" // DEVICEDATA_Configuration_CONST #define ZWD_SETPOINT_INFO "SetPointInfo" #define ZWD_NODE_INFO "NodeInfo" // The Z-Wave node info frame #define ZWD_INITIAL_NAME "InitialName" // The name that was initially set when the node was first added #define ZWD_CONFIGURED_NAME "ConfiguredName" // The user-specified name when we configured the node. We won't need to set the name unless this has changed #define ZWD_CONFIGURED_VARIABLE "ConfiguredVariable" // The user-specified VariablesSet when we configured the node. We won't need to set the name unless this has changed #define ZWD_CONFIGURED_ASSOC "ConfiguredAssoc" // The user-specified AssociationSet when we configured the node. We won't need to set the name unless this has changed #define ZWD_DOCUMENTATION "Documentation" // For the Z-Wave options page #define ZWD_METER_TYPE "MeterType" #define ZWD_METER_SCALE "MeterScale" #define ZWD_ALARM_TYPE "AlarmType" #define ZWD_POLL_OK "PollOk" #define ZWD_POLL_TX_FAIL "PollTxFail" #define ZWD_POLL_NO_REPLY "PollNoReply" #define ZWD_MANUAL_ROUTE "ManualRoute" // A route specified by an end-user #define ZWD_ALL_ROUTES_FAILED "AllRoutesFailed" #define ZWD_AUTO_ROUTE "AutoRoute" // A route chosen by profilings
InsteonNetwork
Basic functionality for all Insteon devices
#define INN_FILE "S_InsteonNetwork1.xml" #define INN_SID "urn:micasaverde-com:serviceId:InsteonNetwork1" #define INN_STYPE "urn:schemas-micasaverde-org:service:InsteonNetwork:1"
Actions
#define INN_RESET_NETWORK "ResetNetwork" #define INN_REMOVE_NODES "RemoveNodes" #define INN_ADD_NODES "AddNodes" #define INN_STOP_ADDREM_NODES "StopAddRemoveNodes" #define INN_SEND_DATA "SendData"
Variables
#define INN_COM_PORT "ComPort" // DEVICEDATA_COM_Port_on_PC_CONST #define INN_LOCK_COM_PORT "LockComPort" #define INN_LAST_ERROR "LastError" #define INN_LAST_UPDATE "LastUpdate" // DEVICEDATA_LastUpdate_CONST #define INN_NET_STATUS_ID "NetStatusID" #define INN_NET_STATUS_TEXT "NetStatusText" #define INN_POLL_ENABLED "PollingEnabled" #define INN_POLL_DELAY_INITIAL "PollDelayInitial" #define INN_POLL_DELAY_DEADTIME "PollDelayDeadTime" #define INN_POLL_MINDELAY "PollMinDelay" #define INN_POLL_FREQUENCY "PollFrequency" #define INN_NODE_ID "NodeID" // The dongle's id #define INN_SL_X10_CODE "sl_X10Code"
InsteonDevice
Basic functionality for all Insteon devices
#define INDEVICE_FILE "S_InsteonDevice1.xml" #define INDEVICE_SID "urn:micasaverde-com:serviceId:InsteonDevice1" #define INDEVICE_STYPE "urn:schemas-micasaverde-com:service:InsteonDevice:1"
Variables
#define IND_POLL_SETTINGS "PollSettings" // DEVICEDATA_Polling_Settings_CONST #define IND_MULTCH_ENDPOINT "MultiChEndpoint" // DEVICEDATA_Multi_Channel_End_Point_CONST #define IND_MULTCH_CAPABIL "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST #define IND_NEIGHBORS "Neighbors" // DEVICEDATA_Neighbors_to_Call_CONST #define IND_CAPABILITIES "Capabilities" // DEVICEDATA_Capabilities_CONST #define IND_CONFIG "Configuration" // DEVICEDATA_Configuration_CONST #define IND_LAST_RESET "LastReset" // DEVICEDATA_Last_Reset_CONST #define IND_SCENES_AS_EVENTS "ScenesAsEvents" // DEVICEDATA_Scenes_As_Events_CONST #define IND_WAKEUP_INTERVAL "WakeupInterval" // DEVICEDATA_Wakeup_Interval_CONST #define IND_LAST_WAKEUP "LastWakeup" // DEVICEDATA_Last_Wakeup_CONST #define IND_LAST_ROUTE_UPD "LastRouteUpdate" // DEVICEDATA_Last_Route_Update_CONST #define IND_VARIABLES_GET "VariablesGet" // DEVICEDATA_Variables_Get_CONST #define IND_VARIABLES_SET "VariablesSet" // DEVICEDATA_Variables_Set_CONST #define IND_ASSOCIATION_GET "AssociationGet" // DEVICEDATA_Association_Get_CONST #define IND_ASSOCIATION_SET "AssociationSet" // DEVICEDATA_Association_Set_CONST #define IND_MANUF_INFO "ManufacturerInfo" // DEVICEDATA_Model_CONST #define IND_VERSION_INFO "VersionInfo" // DEVICEDATA_Configuration_CONST #define IND_UPDATED_NAME "UpdatedName" // DEVICEDATA_Update_Name_CONST
USB UIRT
Basic functionality for USB UIRT
#define UIRT_FILE "S_USBUIRT.xml" #define UIRT_SID "urn:micasaverde-com:serviceId:USBUIRT1" #define UIRT_TYPE "urn:schemas-micasaverde-com:service:USBUIRT:1"
Variables
#define UIRT_COM_PORT "ComPort"
Camera
Basic functionality for all Cameras
#define CAMDEVICE_FILE "S_Camera1.xml" #define CAMDEVICE_SID "urn:micasaverde-com:serviceId:Camera1" #define CAMDEVICE_STYPE "urn:schemas-micasaverde-com:service:Camera:1"
Variables
#define CAM_USERNAME "Username" // DEVICEDATA_AuthUser_CONST
#define CAM_PASSWORD "Password" // DEVICEDATA_AuthPassword_CONST
#define CAM_RELATED_SENSORS "RelatedSensors" // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
#define CAM_SENSOR_ARCHIVE_SEC "SensorArchiveSeconds" // Integer: And after the sensor(s) are tripped archive the video for seconds.
#define CAM_RELATED_LIGHTS "RelatedLights" // Comma separated list: Which lights should be turned on when viewing this camera:
#define CAM_LIGHT_OPTIONS "LightOptions" // V=When I view the camera from the web or phone.
// S=When the sensor(s) above are tripped and they are armed
// B=When the sensors above are tripped and they are *not* armed
// A=When you take an automatic picture for the archive
// So: VSBA means do them all
#define CAM_AUTO_ARCH_SEC "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds
#define CAM_AUTO_PRES_DAYS "AutoArchivePreserveDays" // and keep the pictures x days
#define CAM_URL "URL" // DEVICEDATA_Path_CONST
#define CAM_DIRECT_URL "DirectStreamingURL"
#define CAM_TIMEOUT "Timeout"
PanTiltZoom
For Cameras
#define PTZ_FILE "S_PanTiltZoom1.xml" #define PTZ_SID "urn:micasaverde-com:serviceId:PanTiltZoom1" #define PTZ_STYPE "urn:schemas-micasaverde-com:service:PanTiltZoom:1"
Actions
#define PTZ_LEFT "MoveLeft" #define PTZ_RIGHT "MoveRight" #define PTZ_UP "MoveUp" #define PTZ_DOWN "MoveDown" #define PTZ_IN "ZoomIn" #define PTZ_OUT "ZoomOut"
SwitchPower1
#define SWP_SID "urn:upnp-org:serviceId:SwitchPower1"
Actions
#define SWP_SET_TARGET "SetTarget"
Variables
#define SWP_STATUS "Status" #define SWP_TARGET "Target"
S_WindowCovering1
- define WC_SID "urn:upnp-org:serviceId:WindowCovering1"
Actions
- define WC_UP "Up"
- define WC_DOWN "Down"
- define WC_STOP "Stop"
Variables
- define WC_STATUS "Status"
- define WC_TARGET "Target"
Dimming1
- define SWD_SID "urn:upnp-org:serviceId:Dimming1"
Actions
- define SWD_SET_LOAD_LEVEL "SetLoadLevelTarget"
Variables
- define SWD_LOAD_LEVEL_STATUS "LoadLevelStatus"
- define SWD_LOAD_LEVEL_TARGET "LoadLevelTarget"
DoorLock1
- define DL_SID "urn:micasaverde-com:serviceId:DoorLock1"
Actions
- define DL_SET_TARGET "SetTarget"
- define DL_SET_PIN "SetPin"
- define DL_CLEAR_PIN "ClearPin"
- define DL_SET_PIN_DATE "SetPinValidityDate"
- define DL_SET_PIN_WEEK "SetPinValidityWeekly"
- define DL_CLEAR_PIN_VALID "ClearPinValidity"
Variables
- define DL_STATUS "Status"
- define DL_TARGET "Target"
- define DL_MIN_PIN_SIZE "MinPinSize"
- define DL_MAX_PIN_SIZE "MaxPinSize"
- define DL_KEEP_PIN_CODES "KeepPinCodes"
- define DL_SL_USER_CODE "sl_UserCode"
- define DL_SL_PIN_FAILED "sl_PinFailed"
- define DL_SL_LOCK_BUTTON "sl_LockButton"
- define DL_SL_LOCK_FAILURE "sl_LockFailure"
- define DL_SL_UNAUTH_USER "sl_UnauthUser"
- define DL_SL_LOW_BATTERY "sl_LowBattery"
- define DL_SL_VERY_LOW_BATTERY "sl_VeryLowBattery"
- define DL_SL_CODE_CHANGED "sl_CodeChanged"
- define DL_PIN_CODES "PinCodes" // DEVICEDATA_PIN_Codes_CONST
- define DL_NUM_SCHEDULES "NumSchedules" // DEVICEDATA_PIN_Codes_CONST
HVAC_UserOperatingMode1
- define HVACO_SID "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"
Actions
- define HVACO_SET_MODE "SetModeTarget"
Variables
- define HVACO_TARGET "ModeTarget"
- define HVACO_STATUS "ModeStatus"
HVAC_OperatingState1
- define HVACS_SID "urn:micasaverde-com:serviceId:HVAC_OperatingState1"
Variables
- define HVACS_STATE "ModeState"
- define HVACS_STATE_ENERGY "ModeStateForEnergy"
HVAC_FanOperatingMode1
- define HVACF_SID "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"
Actions
- define HVACF_SET_MODE "SetMode"
Variables
- define HVACF_STATUS "Mode"
TemperatureSetpoint1_Heat/Cool
- define HVACHEAT_SID "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat"
- define HVACCOOL_SID "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"
Actions
- define HVACHC_SETPOINT "SetCurrentSetpoint"
Variables
- define HVACHC_CURRENTSP "CurrentSetpoint"
- define HVACHC_SETPOINT_TARGET "SetpointTarget"
TemperatureSensor1
- define TEMP_SID "urn:upnp-org:serviceId:TemperatureSensor1"
Variables
- define TEMP_CURRENT "CurrentTemperature"
LightSensor1
- define LIGHT_SID "urn:micasaverde-com:serviceId:LightSensor1"
Variables
- define LIGHT_CURRENT "CurrentLevel"
HumiditySensor1
- define HUM_SID "urn:micasaverde-com:serviceId:HumiditySensor1"
Variables
- define HUM_CURRENT "CurrentLevel"
SecuritySensor1
- define SES_SID "urn:micasaverde-com:serviceId:SecuritySensor1"
Variables
- define SES_ARMED "Armed"
- define SES_TRIPPED "Tripped"
- define SES_LAST_TRIP "LastTrip"
Action
- define SES_SET_ARMED "SetArmed"
EnergyMetering1
- define ENE_SID "urn:micasaverde-com:serviceId:EnergyMetering1"
Actions
- define ENE_RESETKWH "ResetKWH" // Reset Kwh
Variables
- define ENE_KWH "KWH"
- define ENE_KWH_READING "KWHReading" // The time it was last read
- define ENE_KVARH "kVARh"
- define ENE_KVAR "kVAR"
- define ENE_WATTS "Watts"
- define ENE_PULSE "Pulse"
- define ENE_ACTUAL "ActualUsage"
- define ENE_USER_SUPPLIED "UserSuppliedWattage"
- define ENE_WHOLE_HOUSE "WholeHouse"
- define ENE_LOG "Log"
IrTransmitter1
- define IRT_SID "urn:micasaverde-com:serviceId:IrTransmitter1"
Variables
- define IRT_SENDPRONTO "SendProntoCode"
SerialPort1
- define SPT_SID "urn:micasaverde-org:serviceId:SerialPort1"
Variables
- define SPT_BAUD "baud"
- define SPT_VENDOR "vendor"
- define SPT_PRODUCT "product"
- define SPT_PATH "path"
SceneController1
- define SCR_SID "urn:micasaverde-com:serviceId:SceneController1"
Variables
- define SCR_SL_SCENE_ACTIVATED "sl_SceneActivated"
- define SCR_SL_SCENE_DEACTIVATED "sl_SceneDeactivated"
- define SCR_SCENES "Scenes"
- define SCR_LAST_SCENE_ID "LastSceneID"
- define SCR_LAST_SCENE_TIME "LastSceneTime"
- define SCR_MANAGE_LEDS "ManageLeds"
- define SCR_NUM_BUTTONS "NumButtons"
- define SCR_FIRES_OFF_EVENTS "FiresOffEvents"
- define SCR_SCENE_SHORTCUTS "SceneShortcuts"
- define SCR_ACTIVATION_METHOD "ActivationMethod" // 1=BASIC_SET only (ignore scene_activate) 2=SCENE_ACTIVATE only (ignore basic set). 0=anything goes
SceneControllerLED1
- define SCL_SID "urn:micasaverde-com:serviceId:SceneControllerLED1"
Actions
- define SCL_SET_LIGHT "SetLight"
Variables
- define SCL_LIGHT_SETTINGS "LightSettings"
GenericIO
- define GIO_SID "urn:micasaverde-com:serviceId:GenericIO"
Variables
- define GIO_IS_INPUT "IsInput" // DEVICEDATA_InputOrOutput_CONST, 1 if it's input
- define GIO_DEFAULT_STATE "DefaultState" // DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed
IR
- define IR_SID "urn:micasaverde-com:serviceId:IrDevice1"
- define IR_SEND_CODE "SendCode"
Variables
- define IR_CODESETS "Codesets"
- define IR_CODESET "Codeset"
- define IR_REMOTE "Remote"
- define IR_MFRID "MfrId"
