Luup UPNP Files
From MiOS
(Difference between revisions)
Micasaverde (Talk | contribs) |
m |
||
| Line 1: | Line 1: | ||
| + | [[Category:Develpment]] | ||
The following is the contents of the file "Constant.h" which defines the strings used for file device types, services, actions, variables, etc. | The following is the contents of the file "Constant.h" which defines the strings used for file device types, services, actions, variables, etc. | ||
Revision as of 20:42, 17 April 2010
The following is the contents of the file "Constant.h" which defines the strings used for file device types, services, actions, variables, etc.
/* Copyright (C) 2008 Mi Casa Verde, Inc., a Nevada Corporation
All rights reserved. This software may not be used or distributed without express consent
- /
#ifndef Constants_h #define Constants_h
// Device Types
#define DEVICETYPE_BINARY_LIGHT "urn:schemas-upnp-org:device:BinaryLight:1" #define DEVICETYPE_DIMMABLE_LIGHT "urn:schemas-upnp-org:device:DimmableLight:1" #define DEVICETYPE_THERMOSTAT "urn:schemas-upnp-org:device:HVAC_ZoneThermostat:1" #define DEVICETYPE_HUMIDITY_SENSOR "urn:schemas-micasaverde-com:device:HumiditySensor:1" #define DEVICETYPE_MULTI_IO "urn:schemas-micasaverde-com:device:MultiIO:1" #define DEVICETYPE_DOOR_LOCK "urn:schemas-micasaverde-com:device:DoorLock:1" #define DEVICETYPE_DOOR_SENSOR "urn:schemas-micasaverde-com:device:DoorSensor:1" #define DEVICETYPE_ZWAVE_NETWORK "urn:schemas-micasaverde-com:device:ZWaveNetwork:1" #define DEVICETYPE_INSTEON_NETWORK "urn:schemas-micasaverde-com:device:InsteonNetwork:1" #define DEVICETYPE_USB_UIRT "urn:schemas-micasaverde-com:device:USBUIRT:1" #define DEVICETYPE_TEMPERATURE_SENSOR "urn:schemas-micasaverde-com:device:TemperatureSensor:1" #define DEVICETYPE_MOTION_SENSOR "urn:schemas-micasaverde-com:device:MotionSensor:1" #define DEVICETYPE_LIGHT_SENSOR "urn:schemas-micasaverde-com:device:LightSensor:1" #define DEVICETYPE_IR_TRANSMITTER "urn:schemas-micasaverde-com:device:IrTransmitter:1" #define DEVICETYPE_WINDOW_COVERING "urn:schemas-micasaverde-com:device:WindowCovering:1" #define DEVICETYPE_GENERIC_IO "urn:schemas-micasaverde-com:device:GenericIO:1" #define DEVICETYPE_REMOTE_CONTROL "urn:schemas-micasaverde-com:device:RemoteControl:1" #define DEVICETYPE_COMBO_DEVICE "urn:schemas-micasaverde-com:device:ComboDevice:1" #define DEVICETYPE_CAMERA "urn:schemas-upnp-org:device:DigitalSecurityCamera:1" #define DEVICETYPE_SERIALPORT "urn:micasaverde-org:device:SerialPort:1" #define DEVICETYPE_SCENE_CONTROLLER "urn:schemas-micasaverde-com:device:SceneController:1" #define DEVICETYPE_ENERGY_CALCULATOR "urn:schemas-micasaverde-com:device:EnergyCalculator:1"
// IR Device Types
#define DEVICETYPE_TV "urn:schemas-micasaverde-com:device:tv:1" #define DEVICETYPE_CABLE "urn:schemas-micasaverde-com:device:cable:1" #define DEVICETYPE_SATELLITE "urn:schemas-micasaverde-com:device:satellite:1" #define DEVICETYPE_VIDEO_ACCESSORY "urn:schemas-micasaverde-com:device:videoaccessory:1" #define DEVICETYPE_VCR_DVR "urn:schemas-micasaverde-com:device:vcrdvd:1" #define DEVICETYPE_DVD_BLURAY "urn:schemas-micasaverde-com:device:dvdbluray:1" #define DEVICETYPE_RECEIVER "urn:schemas-micasaverde-com:device:receiver:1" #define DEVICETYPE_AMP "urn:schemas-micasaverde-com:device:amp:1" #define DEVICETYPE_CD "urn:schemas-micasaverde-com:device:cd:1" #define DEVICETYPE_MISC_HOME_CONTROL "urn:schemas-micasaverde-com:device:mischomecontrol:1" #define DEVICETYPE_AV_MISC "urn:schemas-micasaverde-com:device:avmisc:1" #define DEVICETYPE_VIRTUAL_DEVICE "urn:schemas-micasaverde-com:device:VirtualDevice:1"
// Device Files
#define DEVICEFILE_BINARY_LIGHT "D_BinaryLight1.xml" #define DEVICEFILE_DIMMABLE_LIGHT "D_DimmableLight1.xml" #define DEVICEFILE_THERMOSTAT "D_HVAC_ZoneThermostat1.xml" #define DEVICEFILE_HUMIDITY_SENSOR "D_HumiditySensor1.xml" #define DEVICEFILE_MULTI_IO "D_GC100.xml" #define DEVICEFILE_DOOR_LOCK "D_DoorLock1.xml" #define DEVICEFILE_DOOR_SENSOR "D_MotionSensor1.xml" #define DEVICEFILE_ZWAVE_NETWORK "D_ZWaveNetwork.xml" #define DEVICEFILE_USB_UIRT "D_USB_UIRT.xml" #define DEVICEFILE_TEMPERATURE_SENSOR "D_TemperatureSensor1.xml" #define DEVICEFILE_MOTION_SENSOR "D_MotionSensor1.xml" #define DEVICEFILE_LIGHT_SENSOR "D_LightSensor1.xml" #define DEVICEFILE_IR_TRANSMITTER "D_IrTransmitter1.xml" #define DEVICEFILE_WINDOW_COVERING "D_WindowCovering1.xml" #define DEVICEFILE_GENERIC_IO "D_GenericIO1.xml" #define DEVICEFILE_REMOTE_CONTROL "D_RemoteControl1.xml" #define DEVICEFILE_COMBO_DEVICE "D_ComboDevice1.xml" #define DEVICEFILE_CAMERA "D_DigitalSecurityCamera1.xml" #define DEVICEFILE_SCENE_CONTROLLER "D_SceneController1.xml" #define DEVICEFILE_ENERGY_CALCULATOR "D_EnergyCalculator1.xml" #define DEVICEFILE_AV_MISC "D_AvMisc1.xml"
// Device Categories
#define DEVICE_CATEGORY_INTERFACE 1 #define DEVICE_CATEGORY_DIMMABLE_LIGHT 2 #define DEVICE_CATEGORY_SWITCH 3 #define DEVICE_CATEGORY_SECURITY_SENSOR 4 #define DEVICE_CATEGORY_HVAC 5 #define DEVICE_CATEGORY_CAMERA 6 #define DEVICE_CATEGORY_DOOR_LOCK 7 #define DEVICE_CATEGORY_WINDOW_COV 8 #define DEVICE_CATEGORY_REMOTE_CONTROL 9 #define DEVICE_CATEGORY_IR_TX 10 #define DEVICE_CATEGORY_GENERIC_IO 11 #define DEVICE_CATEGORY_GENERIC_SENSOR 12 #define DEVICE_CATEGORY_SERIAL_PORT 13 #define DEVICE_CATEGORY_SCENE_CONTROLLER 14 #define DEVICE_CATEGORY_AV 15 #define DEVICE_CATEGORY_HUMIDITY 16 #define DEVICE_CATEGORY_TEMPERATURE 17 #define DEVICE_CATEGORY_LIGHT 18 #define DEVICE_CATEGORY_ZWAVE_INT 19 #define DEVICE_CATEGORY_INSTEON_INT 20
// Cast the second one between int and char * so we can use a simple // array that's fast to iterate and not use an stl map
extern const char *g_DeviceCategories[]; extern const char *g_DeviceDescriptions[]; // Default descriptions
#define MINIMUM_TIME 1230811200 // If the time is < this, we'll assume the clock isn't set
// This is a special argument which, if 1, means this action is 'temporary' and the system must note the current settings with Device_Action::CreateRestorePoint and restore them with GotoRestorePoint
#define TEMPORARY_UPNP_ARGUMENT "TEMPORARY_UPNP_ARGUMENT"
#define SAFE_DEVICE_ID(pDevice_LuaUPnP) (pDevice_LuaUPnP ? pDevice_LuaUPnP->m_pDevice_Basic_get()->m_iDevice_Num_get() : 0)
// These are stored in the json file for the device itself and not part of the UPNP variables:
/* Device_Num FK_DevType Device_Num_Parent FK_Device_Category Room_Num
Description InternalID // DEVICEDATA_PortChannel_Number_CONST Manufacturer// DEVICEDATA_Manufacturer_Desc_CONST Model // DEVICEDATA_Model_Desc_CONST IPAddress MacAddress UPnPDeviceFile // DEVICEDATA_UPnP_Dev_File_CONST */
// ============ HaGateway ============ // Basic functionality for the gateway itself
#define HAGEVICE_FILE "S_HomeAutomationGateway1.xml" #define HAGEVICE_SID "urn:micasaverde-com:serviceId:HomeAutomationGateway1" #define HAGEVICE_STYPE "urn:schemas-micasaverde-org:service:HomeAutomationGateway:1"
// Variables
#define HAG_ACTIVE_SCENES "ActiveScenes"
/* #define HAG_ENERGY_DOW "EnergyDOW" #define HAG_ENERGY_TIME_OF_DAY "GetUserData" #define HAG_NUM_LIGHTS "GetUserData" #define HAG_THERMOSTAT_ON "GetUserData" #define HAG_ENERGY_DOW "GetUserData" */
// Actions
#define HAG_GET_USER_DATA "GetUserData" #define HAG_MODIFY_USER_DATA "ModifyUserData" #define HAG_MODIFY_GET_VARIABLE "GetVariable" #define HAG_MODIFY_SET_VARIABLE "SetVariable" #define HAG_MODIFY_GET_STATUS "GetStatus" #define HAG_MODIFY_GET_ACTIONS "GetActions" #define HAG_MODIFY_CREATE_DEVICE "CreateDevice" #define HAG_MODIFY_DELETE_DEVICE "DeleteDevice" #define HAG_PROCESS_CHILD "ProcessChildDevices" #define HAG_RELOAD "Reload" #define HAG_RUN_SCENE "RunScene" #define HAG_RUN_LUA "RunLua"
// ============ HaDevice ============
// Basic functionality for all home automation devices
#define HADEVICE_FILE "S_HaDevice1.xml" #define HADEVICE_SID "urn:micasaverde-com:serviceId:HaDevice1" #define HADEVICE_STYPE "urn:schemas-micasaverde-com:service:HaDevice:1"
// Variables
#define HAD_ENERGY_LOG "EnergyLog" // DEVICEDATA_Energy_Log_CONST #define HAD_WATTS "Watts" // DEVICEDATA_Wattage_CONST #define HAD_IOPORT_DEVICE "IODevice" // The device number to connect to for IO (this is on the master device) #define HAD_IOPORT_PORT "IOPort" // The port to receive connections on from HAD_IOPORT_DEVICE (this is on the serial port) #define HAD_IGNORE_ROOM "IgnoreRoom" // DEVICEDATA_Room_Not_Required_CONST #define HAD_COMM_FAILURE "CommFailure" #define HAD_POLLING_ENABLED "PollingEnabled" #define HAD_POLL_MIN_DELAY "PollMinDelay" #define HAD_CONFIGURED "Configured" #define HAD_JOBID "JobID" #define HAD_REVERSE "ReverseOnOff" // DEVICEDATA_Reverse_CONST #define HAD_LAST_UPDATE "LastUpdate" // DEVICEDATA_LastUpdate_CONST #define HAD_AUTO_CONFIGURE "AutoConfigure" // DEVICEDATA_Auto_Configure_CONST
#define HAD_RECONFIGURE "Reconfigure" #define HAD_REMOVE "Remove" #define HAD_POLL "Poll" #define HAD_SET_POLL_FREQUENCY "SetPollFrequency" #define HAD_STRESS_TEST "StressTest"
// ============ ZWaveNetwork ============ // Basic functionality for all ZWave devices
#define ZWN_FILE "S_ZWaveNetwork1.xml" #define ZWN_SID "urn:micasaverde-com:serviceId:ZWaveNetwork1" #define ZWN_STYPE "urn:schemas-micasaverde-org:service:ZWaveNetwork:1"
#define ZWN_RESET_NETWORK "ResetNetwork" #define ZWN_REMOVE_NODES "RemoveNodes" #define ZWN_ADD_NODES "AddNodes" #define ZWN_DOWNLOAD "DownloadNetwork" #define ZWN_HEAL_NETWORK "HealNetwork" #define ZWN_SET_POLLING "SetPolling" #define ZWN_SEND_DATA "SendData" #define ZWN_POLL_ALL_NODES "PollAllNodes" #define ZWN_SOFT_RESET "SoftReset" #define ZWN_BACKUP_DONGLE "BackupDongle"
// Variables
#define ZWN_LAST_UPDATE "LastUpdate" // DEVICEDATA_LastUpdate_CONST #define ZWN_LAST_DONGLE_BACKUP "LastDongleBackup" #define ZWN_AUTO_CONFIGURE "AutoConfigure" // DEVICEDATA_Auto_Configure_CONST #define ZWN_NET_STATUS_ID "NetStatusID" #define ZWN_NET_STATUS_TEXT "NetStatusText" #define ZWN_COM_PORT "ComPort" // DEVICEDATA_COM_Port_on_PC_CONST #define ZWN_NODE_ID "NodeID" // The dongle's id #define ZWN_VERSION_INFO "VersionInfo" #define ZWN_HOME_ID "HomeID" #define ZWN_ROLE "Role" #define ZWN_RESET_MODE "ResetMode" #define ZWN_INCLUSION_MODE "InclusionMode" #define ZWN_NODETYPE "NodeType" #define ZWN_TIMEOUT "Timeout" #define ZWN_MULTIPLE "Multiple" #define ZWN_SIMULATE_INCOMING "SimulateIncomingData" #define ZWN_POLL_ENABLED "PollingEnabled" #define ZWN_POLL_DELAY_INITIAL "PollDelayInitial" #define ZWN_POLL_DELAY_DEADTIME "PollDelayDeadTime" #define ZWN_POLL_MINDELAY "PollMinDelay" #define ZWN_POLL_FREQUENCY "PollFrequency" #define ZWN_LAST_ERROR "LastError" #define ZWN_DELAY_PROCESSING "DelayProcessing" implement this
// ============ ZWaveDevice ============ // Basic functionality for all ZWave devices
#define ZWDEVICE_FILE "S_ZWaveDevice1.xml" #define ZWDEVICE_SID "urn:micasaverde-com:serviceId:ZWaveDevice1" #define ZWDEVICE_STYPE "urn:schemas-micasaverde-com:service:ZWaveDevice:1"
// Variables
#define ZWD_POLL_SETTINGS "PollSettings" // DEVICEDATA_Polling_Settings_CONST #define ZWD_MULTCH_ENDPOINT "MultiChEndpoint" // DEVICEDATA_Multi_Channel_End_Point_CONST #define ZWD_MULTCH_CAPABIL "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
// ZWD_MULTCH_ENDPOINT string m_sMultiChannelList, // If m_cProtocolVersion>=2 (multi channel), then If this has embedded devices, Format: [number of end points] , [0/1 end points are dynamic], [0/1 end points are identical]
// If m_cProtocolVersion<2 (multi instance), then the total number of instances
// ZWD_MULTCH_CAPABIL m_sMultiChannelCapability; // m_cProtocolVersion>=2, if this has devices, Format: [end point #], Generic device class, Specific device class, command class 1, command class 2.... \n repeat next end point
// If m_cProtocolVersion<2, command class, # of instances \n repeat command class
#define ZWD_NEIGHBORS "Neighbors" // DEVICEDATA_Neighbors_to_Call_CONST #define ZWD_CAPABILITIES "Capabilities" // DEVICEDATA_Capabilities_CONST #define ZWD_CONFIG "Configuration" // DEVICEDATA_Configuration_CONST #define ZWD_LAST_RESET "LastReset" // DEVICEDATA_Last_Reset_CONST #define ZWD_SCENES_AS_EVENTS "ScenesAsEvents" // DEVICEDATA_Scenes_As_Events_CONST #define ZWD_SCENES "Scenes" // DEVICEDATA_Scenes_CONST #define ZWD_SCENES_TIMESTAMPS "ScenesTimestamp" // DEVICEDATA_Scenes_CONST #define ZWD_WAKEUP_INTERVAL "WakeupInterval" // DEVICEDATA_Wakeup_Interval_CONST #define ZWD_BATTERY_LEVEL "BatteryLevel" // DEVICEDATA_Battery_Level_CONST #define ZWD_BATTERY_ALARM "BatteryAlarm" // DEVICEDATA_Battery_Alarm_CONST #define ZWD_LAST_WAKEUP "LastWakeup" // DEVICEDATA_Last_Wakeup_CONST #define ZWD_LAST_ROUTE_UPD "LastRouteUpdate" // DEVICEDATA_Last_Route_Update_CONST #define ZWD_VARIABLES_GET "VariablesGet" // DEVICEDATA_Variables_Get_CONST #define ZWD_VARIABLES_SET "VariablesSet" // DEVICEDATA_Variables_Set_CONST #define ZWD_ASSOCIATION_GET "AssociationGet" // DEVICEDATA_Association_Get_CONST #define ZWD_ASSOCIATION_SET "AssociationSet" // DEVICEDATA_Association_Set_CONST #define ZWD_MANUF_INFO "ManufacturerInfo" // DEVICEDATA_Model_CONST #define ZWD_VERSION_INFO "VersionInfo" // DEVICEDATA_Configuration_CONST #define ZWD_UPDATED_NAME "UpdatedName" // DEVICEDATA_Update_Name_CONST
// ============ InsteonNetwork ============
// Basic functionality for all Insteon devices
#define INN_FILE "S_InsteonNetwork1.xml" #define INN_SID "urn:micasaverde-com:serviceId:InsteonNetwork1" #define INN_STYPE "urn:schemas-micasaverde-org:service:InsteonNetwork:1"
#define INN_RESET_NETWORK "ResetNetwork" #define INN_REMOVE_NODES "RemoveNodes" #define INN_ADD_NODES "AddNodes" #define INN_SEND_DATA "SendData"
// Variables
#define INN_COM_PORT "ComPort" // DEVICEDATA_COM_Port_on_PC_CONST #define INN_LAST_ERROR "LastError" #define INN_AUTO_CONFIGURE "AutoConfigure" // DEVICEDATA_Auto_Configure_CONST #define INN_LAST_UPDATE "LastUpdate" // DEVICEDATA_LastUpdate_CONST #define INN_NET_STATUS_ID "NetStatusID" #define INN_NET_STATUS_TEXT "NetStatusText" #define INN_POLL_ENABLED "PollingEnabled" #define INN_POLL_DELAY_INITIAL "PollDelayInitial" #define INN_POLL_DELAY_DEADTIME "PollDelayDeadTime" #define INN_POLL_MINDELAY "PollMinDelay" #define INN_POLL_FREQUENCY "PollFrequency" #define INN_NODE_ID "NodeID" // The dongle's id
/* #define INN_VERSION_INFO "VersionInfo" #define INN_HOME_ID "HomeID" #define INN_ROLE "Role" #define INN_RESET_MODE "ResetMode" #define INN_INCLUSION_MODE "InclusionMode" #define INN_NODETYPE "NodeType" #define INN_TIMEOUT "Timeout" #define INN_MULTIPLE "Multiple" #define INN_SIMULATE_INCOMING "SimulateIncomingData" */
// ============ InsteonDevice ============ // Basic functionality for all Insteon devices
#define INDEVICE_FILE "S_InsteonDevice1.xml" #define INDEVICE_SID "urn:micasaverde-com:serviceId:InsteonDevice1" #define INDEVICE_STYPE "urn:schemas-micasaverde-com:service:InsteonDevice:1"
// Variables
#define IND_POLL_SETTINGS "PollSettings" // DEVICEDATA_Polling_Settings_CONST #define IND_MULTCH_ENDPOINT "MultiChEndpoint" // DEVICEDATA_Multi_Channel_End_Point_CONST #define IND_MULTCH_CAPABIL "MultiChCapabilities" // DEVICEDATA_Multi_Channel_Capabilities_CONST
// IND_MULTCH_ENDPOINT string m_sMultiChannelList, // If m_cProtocolVersion>=2 (multi channel), then If this has embedded devices, Format: [number of end points] , [0/1 end points are dynamic], [0/1 end points are identical]
// If m_cProtocolVersion<2 (multi instance), then the total number of instances
// IND_MULTCH_CAPABIL m_sMultiChannelCapability; // m_cProtocolVersion>=2, if this has devices, Format: [end point #], Generic device class, Specific device class, command class 1, command class 2.... \n repeat next end point
// If m_cProtocolVersion<2, command class, # of instances \n repeat command class
#define IND_NEIGHBORS "Neighbors" // DEVICEDATA_Neighbors_to_Call_CONST #define IND_CAPABILITIES "Capabilities" // DEVICEDATA_Capabilities_CONST #define IND_CONFIG "Configuration" // DEVICEDATA_Configuration_CONST #define IND_LAST_RESET "LastReset" // DEVICEDATA_Last_Reset_CONST #define IND_SCENES_AS_EVENTS "ScenesAsEvents" // DEVICEDATA_Scenes_As_Events_CONST #define IND_SCENES "Scenes" // DEVICEDATA_Scenes_CONST #define IND_WAKEUP_INTERVAL "WakeupInterval" // DEVICEDATA_Wakeup_Interval_CONST #define IND_BATTERY_LEVEL "BatteryLevel" // DEVICEDATA_Battery_Level_CONST #define IND_BATTERY_ALARM "BatteryAlarm" // DEVICEDATA_Battery_Alarm_CONST #define IND_LAST_WAKEUP "LastWakeup" // DEVICEDATA_Last_Wakeup_CONST #define IND_LAST_ROUTE_UPD "LastRouteUpdate" // DEVICEDATA_Last_Route_Update_CONST #define IND_VARIABLES_GET "VariablesGet" // DEVICEDATA_Variables_Get_CONST #define IND_VARIABLES_SET "VariablesSet" // DEVICEDATA_Variables_Set_CONST #define IND_ASSOCIATION_GET "AssociationGet" // DEVICEDATA_Association_Get_CONST #define IND_ASSOCIATION_SET "AssociationSet" // DEVICEDATA_Association_Set_CONST #define IND_MANUF_INFO "ManufacturerInfo" // DEVICEDATA_Model_CONST #define IND_VERSION_INFO "VersionInfo" // DEVICEDATA_Configuration_CONST #define IND_UPDATED_NAME "UpdatedName" // DEVICEDATA_Update_Name_CONST
// ============ USB UIRT ============ // Basic functionality for USB UIRT
#define UIRT_FILE "S_USBUIRT.xml" #define UIRT_SID "urn:micasaverde-com:serviceId:USBUIRT1" #define UIRT_TYPE "urn:schemas-micasaverde-com:service:USBUIRT:1"
// Variables
// Actions
#define UIRT_COM_PORT "ComPort"
// ============ Camera ============ // Basic functionality for all Cameras
#define CAMDEVICE_FILE "S_Camera1.xml" #define CAMDEVICE_SID "urn:micasaverde-com:serviceId:Camera1" #define CAMDEVICE_STYPE "urn:schemas-micasaverde-com:service:Camera:1"
// Variables
#define CAM_USERNAME "Username" // DEVICEDATA_AuthUser_CONST #define CAM_PASSWORD "Password" // DEVICEDATA_AuthPassword_CONST
#define CAM_RELATED_SENSORS "RelatedSensors" // Comma separated list: Archive a photo whenever the following sensors are tripped or doors are opened:
#define CAM_SENSOR_ARCHIVE_SEC "SensorArchiveSeconds" // Integer: And after the sensor(s) are tripped archive the video for seconds.
#define CAM_RELATED_LIGHTS "RelatedLights" // Comma separated list: Which lights should be turned on when viewing this camera:
#define CAM_LIGHT_OPTIONS "LightOptions" // V=When I view the camera from the web or phone.
// S=When the sensor(s) above are tripped and they are armed
// B=When the sensors above are tripped and they are *not* armed
// A=When you take an automatic picture for the archive
// So: VSBA means do them all
#define CAM_AUTO_ARCH_SEC "AutoArchiveSeconds" // For archival purposes, take a picture from the camera every x seconds #define CAM_AUTO_PRES_DAYS "AutoArchivePreserveDays" // and keep the pictures x days #define CAM_URL "URL" // DEVICEDATA_Path_CONST
// ============ PanTiltZoom ============ // For Cameras
#define PTZ_FILE "S_PanTiltZoom1.xml" #define PTZ_SID "urn:micasaverde-com:serviceId:PanTiltZoom1" #define PTZ_STYPE "urn:schemas-micasaverde-com:service:PanTiltZoom:1"
// Actions
#define PTZ_LEFT "MoveLeft" #define PTZ_RIGHT "MoveRight" #define PTZ_UP "MoveUp" #define PTZ_DOWN "MoveDown" #define PTZ_IN "ZoomIn" #define PTZ_OUT "ZoomOut"
// ============ SwitchPower1 ============
#define SWP_SID "urn:upnp-org:serviceId:SwitchPower1"
// Actions
#define SWP_SET_TARGET "SetTarget"
// Variables
#define SWP_STATUS "Status" #define SWP_TARGET "Target"
// ============ S_WindowCovering1 ============
#define WC_SID "urn:upnp-org:serviceId:WindowCovering1"
// Actions
#define WC_UP "Up" #define WC_DOWN "Down" #define WC_STOP "Stop"
// Variables
// ============ Dimming1 ============
#define SWD_SID "urn:upnp-org:serviceId:Dimming1"
// Actions
#define SWD_SET_LOAD_LEVEL "SetLoadLevelTarget"
// Variables
#define SWD_LOAD_LEVEL_STATUS "LoadLevelStatus" #define SWD_LOAD_LEVEL_TARGET "LoadLevelTarget"
// ============ DoorLock1 ============
#define DL_SID "urn:micasaverde-com:serviceId:DoorLock1"
// Actions
#define DL_SET_TARGET "SetTarget" #define DL_SET_PIN "SetPin" #define DL_CLEAR_PIN "ClearPin"
// Variables
#define DL_STATUS "Status" #define DL_TARGET "Target" #define DL_SL_USER_CODE "sl_UserCode" #define DL_SL_PIN_FAILED "sl_PinFailed"
// Syntax: CodeID, Pin Code (only if start date is not empty), start date, stop date, Name \t
#define DL_PIN_CODES "PinCodes" // DEVICEDATA_PIN_Codes_CONST
// ============ HVAC_UserOperatingMode1 ============
#define HVACO_SID "urn:upnp-org:serviceId:HVAC_UserOperatingMode1"
// Actions
#define HVACO_SET_MODE "SetModeTarget"
// Variables
#define HVACO_STATUS "ModeStatus"
// ============ HVAC_FanOperatingMode1 ============
#define HVACF_SID "urn:upnp-org:serviceId:HVAC_FanOperatingMode1"
// Actions
#define HVACF_SET_MODE "SetMode"
// Variables
#define HVACF_STATUS "ModeStatus"
// ============ TemperatureSetpoint1_Heat/Cool ============
#define HVACHEAT_SID "urn:upnp-org:serviceId:TemperatureSetpoint1_Heat" #define HVACCOOL_SID "urn:upnp-org:serviceId:TemperatureSetpoint1_Cool"
// Variables
#define HVACHC_SETPOINT "SetCurrentSetpoint"
// Variables
#define HVACHC_CURRENTSP "CurrentSetpoint"
// ============ TemperatureSensor1 ============
#define TEMP_SID "urn:upnp-org:serviceId:TemperatureSensor1"
// Variables
#define TEMP_CURRENT "CurrentTemperature"
// ============ LightSensor1 ============
#define LIGHT_SID "urn:micasaverde-com:serviceId:LightSensor1"
// Variables
#define LIGHT_CURRENT "CurrentLevel"
// ============ HumiditySensor1 ============
#define HUM_SID "urn:micasaverde-com:serviceId:HumiditySensor1"
// Variables
#define HUM_CURRENT "CurrentLevel"
// ============ SecuritySensor1 ============
#define SES_SID "urn:micasaverde-com:serviceId:SecuritySensor1"
// Variables
#define SES_ARMED "Armed" #define SES_TRIPPED "Tripped"
// Action
#define SES_SET_ARMED "SetArmed"
// ============ EnergyMetering1 ============
#define ENE_SID "urn:micasaverde-com:serviceId:EnergyMetering1"
// Variables
#define ENE_KWH "KWH" #define ENE_WATT "Watt" #define ENE_ACTUAL "ActualUsage" #define ENE_USER_SUPPLIED "UserSuppliedWattage"
// ============ IrTransmitter1 ============
#define IRT_SID "urn:micasaverde-com:serviceId:IrTransmitter1"
// Variables
#define IRT_SENDPRONTO "SendProntoCode"
// ============ SerialPort1 ============
#define SPT_SID "urn:micasaverde-org:serviceId:SerialPort1"
// Variables
#define SPT_BAUD "baud"
// ============ SceneController1 ============
#define SCR_SID "urn:micasaverde-com:serviceId:SceneController1"
// Variables
#define SCR_SL_SCENE_ACTIVATED "sl_SceneActivated" #define SCR_SL_SCENE_DEACTIVATED "sl_SceneDeactivated"
// ============ GenericIO ============
#define GIO_SID "urn:micasaverde-com:serviceId:GenericIO"
// Variables
#define GIO_IS_INPUT "IsInput" // DEVICEDATA_InputOrOutput_CONST, 1 if it's input #define GIO_DEFAULT_STATE "DefaultState"// DEVICEDATA_Default_State_CONST, 0 is 'normal', 1 if it's reversed
- endif
