Revision as of 05:23, 14 September 2009

This page is not yet complete...

Introduction

This is a page for Supported USB, or USB-Serial, interface devices.

USB, and USB-Serial, devices need to be recognized by Vera's platform before they can be used to interface with the target device (through a Luup Module). There are many USB-Serial devices out there, and not all will work out of the gate.

This page is intended to capture the list of known USB Devices that have been tried with Vera, along with their current status, and any information required to get them working.

This is a wiki, so feel free to add to the page.

Disclaimer

IMPORTANT! The devices listed here have been added by installers, technicians and users like yourself. Results may vary upon installations. MiCasaVerde does not guarantee operation and compatibility with your installation. The listed devices were found to work with their specific installation. Mixing different series and brands of equipment is not guaranteed in any way to work with other series and brands. It is very likely that users have not fully tested all features of the devices, so it is possible that a device listed here as compatible, will not prove compatible with your hardware. If you are editing this wiki DO NOT REMOVE a listed working device if it hasn't worked for you. Seek help to get the device to work under your individual circumstance. If you are adding to this wiki, please provide links to data for the device and add any tips you feel may benefit someone wanting to implement the device into an installation.

USB Devices

USB-Serial Devices

Discussions

• Forum Posting - How to make Vera recognize your USB-to-Serial Adapter
• Forum Posting - Serial port:
• Forum Posting - Attempts to get ser2net Proxy working on a remote router device