EtherRain Sprinkler Controller
From MiOS
(Difference between revisions)
| Line 1: | Line 1: | ||
[[Image:Etherrain8.jpg]] | [[Image:Etherrain8.jpg]] | ||
| + | |||
[http://www.quicksmart.com/qs_etherrain.html EtherRain Sprinkler Controller] allows controlling of up to 8 regular 24V irrigation valves. | [http://www.quicksmart.com/qs_etherrain.html EtherRain Sprinkler Controller] allows controlling of up to 8 regular 24V irrigation valves. | ||
| + | |||
| + | |||
To control Etherrain from Vera the following steps are required | To control Etherrain from Vera the following steps are required | ||
| − | * Create Etherrain device as | + | * Create Etherrain device as usual, assign a room, and click Save |
* Once reloaded, go to Variables, and enter the required parameters as following | * Once reloaded, go to Variables, and enter the required parameters as following | ||
** IP address of the Etherrain controller | ** IP address of the Etherrain controller | ||
** StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required | ** StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required | ||
| − | ** Valve1- | + | ** Valve1-8 - irrigation time for each valve, in minutes, leave zero for not used valves. |
** User and Password - update, or leave default values if you haven't changed them on the controller | ** User and Password - update, or leave default values if you haven't changed them on the controller | ||
* Save | * Save | ||
[[Image:EtherRain-vars.png]] | [[Image:EtherRain-vars.png]] | ||
| + | |||
| + | |||
Now you can click '''On''' to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero. | Now you can click '''On''' to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero. | ||
It will stop automatically once irrigation cycle completed. | It will stop automatically once irrigation cycle completed. | ||
| + | |||
'''Off''' button will stop irrigation cycle | '''Off''' button will stop irrigation cycle | ||
[[Image:EtherRain-basic.png]] | [[Image:EtherRain-basic.png]] | ||
| + | |||
| + | |||
| + | |||
| + | Enjoy! | ||
Revision as of 02:48, 30 August 2009
EtherRain Sprinkler Controller allows controlling of up to 8 regular 24V irrigation valves.
To control Etherrain from Vera the following steps are required
- Create Etherrain device as usual, assign a room, and click Save
- Once reloaded, go to Variables, and enter the required parameters as following
- IP address of the Etherrain controller
- StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required
- Valve1-8 - irrigation time for each valve, in minutes, leave zero for not used valves.
- User and Password - update, or leave default values if you haven't changed them on the controller
- Save
Now you can click On to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero. It will stop automatically once irrigation cycle completed.
Off button will stop irrigation cycle
Enjoy!
