Networking Setup:Vera WiFi in Client Mode

From MiOS
(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
−
If you allready have an wireless network adn you want to connect vera to it, you'll need to set Vera WiFi in Client mode. TO do that follow the following steps:
+
If you already have a wireless network and you want to connect Vera to it, you'll need to set Vera Wi-Fi to Client mode. To do that follow these steps:  
−
  Step0. Unplug any cables from the WAN Port
+
 
−
  Step1. Open Vera Web Admin page: http://local.findvera.com
+
  Step 0. Unplug any cables from the WAN Port
−
  Step2. Go to Advanced -> Net&wi-fi
+
  Step 1. Open Vera Web Admin page: http://local.findvera.com
−
  Step3. Set:
+
  Step 2. Go to Advanced -> Net&Wi-Fi
−
             - Firewall to No Firewall (bridge)
+
  Step 3. Set:
−
             - Dhcp Server: off
+
             - Firewall: No Firewall (bridge)
−
         Press Save&Applay
+
             - DHCP Server: Off
−
  Step4. Go to Advanced -> Net&wi-fi -> Advanced Configurations
+
         Press Save & Apply Changes
−
         If you haven't setup any users, login with root ( by default there is no password)
+
  Step 4. Go to Advanced -> Net&Wi-Fi -> Advanced Configurations
−
  Step5. Go to Network -> Wireless
+
         If you haven't setup any users, login with root (by default there is no password)
−
  Step6. Wireless Adapter wl0 Configuration
+
  Step 5. Go to Network -> Wireless
 +
  Step 6. Wireless Adapter wl0 Configuration
 
         Set Radio to On and Channel to Auto
 
         Set Radio to On and Channel to Auto
−
  Step7. Wireless Virtual Adaptor Configuration for Wireless Card wl0  
+
  Step 7. Wireless Virtual Adapter Configuration for Wireless Card wl0  
−
         Set Mode to Client
+
         Set:
−
        Set ESSID, Encryption Type, according to your existing wireless network
+
              - Mode: Client
−
  Step8. Press Save && Applay Changes
+
              - ESSID: (according to your existing wireless network)
 +
              - Encryption Type: (according to your existing wireless network)
 +
  Step 8. Press Save & Apply Changes

Revision as of 01:32, 2 August 2009

If you already have a wireless network and you want to connect Vera to it, you'll need to set Vera Wi-Fi to Client mode. To do that follow these steps: 

Step 0. Unplug any cables from the WAN Port
Step 1. Open Vera Web Admin page: http://local.findvera.com
Step 2. Go to Advanced -> Net&Wi-Fi
Step 3. Set:
            - Firewall: No Firewall (bridge)
            - DHCP Server: Off
       Press Save & Apply Changes
Step 4. Go to Advanced -> Net&Wi-Fi -> Advanced Configurations
       If you haven't setup any users, login with root (by default there is no password)
Step 5. Go to Network -> Wireless
Step 6. Wireless Adapter wl0 Configuration
        Set Radio to On and Channel to Auto
Step 7. Wireless Virtual Adapter Configuration for Wireless Card wl0 
        Set:
             - Mode: Client
             - ESSID: (according to your existing wireless network)
             - Encryption Type: (according to your existing wireless network)
Step 8. Press Save & Apply Changes
Retrieved from "http://wiki.mios.com/index.php?title=Networking_Setup:Vera_WiFi_in_Client_Mode&oldid=1388"
Personal tools