ZWave Add Device
(New page: If the SAVE button in the upper left is red, click it to save your changes before you add new devices. 1. To add Z-Wave devices, first remove the Z-Wave dongle from the Home Gateway as sho...) |
|||
| Line 1: | Line 1: | ||
| − | If the SAVE button in the upper left is red, click it to save your changes before you add new devices. | + | If the '''SAVE button''' in the upper left is '''red''', click it to save your changes before you add new devices.<br> |
| − | 1. To add Z-Wave devices, first remove the Z-Wave dongle from the Home Gateway as shown. | + | 1. To add Z-Wave devices, first remove the Z-Wave dongle from the Home Gateway as shown.<br> |
| − | [[Image:zwave_remove_dongle.jpg]] | + | [[Image:zwave_remove_dongle.jpg]]<br> |
| − | 2. Tap the button on the Z-Wave dongle to put it in 'Include' Mode. | + | 2. Tap the button on the Z-Wave dongle to put it in 'Include' Mode.<br> |
| − | {| | + | {| border="1" cellpadding="1" cellspacing="1" align="center" width="30%" |
| [[Image:zwave_dongle_off.jpg]] || [[Image:zwave_dongle_include_mode.gif]] || [[Image:zwave_dongle_reset_mode.gif] | | [[Image:zwave_dongle_off.jpg]] || [[Image:zwave_dongle_include_mode.gif]] || [[Image:zwave_dongle_reset_mode.gif] | ||
|- | |- | ||
| − | | '''OFF - no light''' | + | | '''OFF - no light''' If the dongle is in include or reset mode tap the button to turn it off. || '''INCLUDE - slow blinking''' When the dongle is off tap the button to put it in include mode so you can add devices. || '''RESET - fast blinking''' When the dongle is off hold the button for 3 seconds until it starts blinking fast then release the button. This will reset devices. |
| − | If the dongle is in include or reset mode tap the button to turn it off. || '''INCLUDE - slow blinking''' | + | |
| − | When the dongle is off tap the button to put it in include mode so you can add devices. || '''RESET - fast blinking''' | + | |
| − | When the dongle is off hold the button for 3 seconds until it starts blinking fast then release the button. This will reset devices. | + | |
|} | |} | ||
| − | 3. Carry the dongle with you as you activate all your Z-Wave devices. For lights, you generally activate them by turning the light on or off. Other Z-Wave devices will have an activate button. When you have successfully added a new Z-Wave device, the blue light on the dongle will stay on solid for 2 seconds. If you cannot add a Z-Wave device, then device was probably already added to another Z-Wave network and needs to be reset first, as explained here | + | 3. Carry the dongle with you as you activate all your Z-Wave devices. For lights, you generally activate them by turning the light on or off. Other Z-Wave devices will have an activate button. When you have successfully added a new Z-Wave device, the blue light on the dongle will stay on solid for 2 seconds. If you cannot add a Z-Wave device, then device was probably already added to another Z-Wave network and needs to be reset first, as explained here. <br> |
| − | 4. Once you have included all your Z-Wave devices, then reconnect the dongle to the Z-Wave Home Gateway. | + | 4. Once you have included all your Z-Wave devices, then reconnect the dongle to the Z-Wave Home Gateway.<br> |
| − | 5. When you reconnect the dongle, I will show you any new devices you added in the order you added them. You need to give them a descriptive name, like 'Black table lamp' and pick the room they are in. If you have a lot of Z-Wave devices to add, you can add them a few at a time so that when you go to give them names you do not have too many new devices at once. You can click the 'Add Z-Wave devices' button at any time to add new Z-Wave devices. | + | 5. When you reconnect the dongle, I will show you any new devices you added in the order you added them. You need to give them a descriptive name, like 'Black table lamp' and pick the room they are in. If you have a lot of Z-Wave devices to add, you can add them a few at a time so that when you go to give them names you do not have too many new devices at once. You can click the 'Add Z-Wave devices' button at any time to add new Z-Wave devices.<br> |
Note: If you're having trouble adding devices, those devices probably need to be reset, as here: troubleshooting. Also, if you have unsaved changes, meaning the save button in the upper left is RED, you won't see your new devices until you first save your changes. | Note: If you're having trouble adding devices, those devices probably need to be reset, as here: troubleshooting. Also, if you have unsaved changes, meaning the save button in the upper left is RED, you won't see your new devices until you first save your changes. | ||
Revision as of 15:55, 17 March 2009
If the SAVE button in the upper left is red, click it to save your changes before you add new devices.
1. To add Z-Wave devices, first remove the Z-Wave dongle from the Home Gateway as shown.
2. Tap the button on the Z-Wave dongle to put it in 'Include' Mode.
 |
 |
[[Image:zwave_dongle_reset_mode.gif] |
| OFF - no light If the dongle is in include or reset mode tap the button to turn it off. | INCLUDE - slow blinking When the dongle is off tap the button to put it in include mode so you can add devices. | RESET - fast blinking When the dongle is off hold the button for 3 seconds until it starts blinking fast then release the button. This will reset devices. |
3. Carry the dongle with you as you activate all your Z-Wave devices. For lights, you generally activate them by turning the light on or off. Other Z-Wave devices will have an activate button. When you have successfully added a new Z-Wave device, the blue light on the dongle will stay on solid for 2 seconds. If you cannot add a Z-Wave device, then device was probably already added to another Z-Wave network and needs to be reset first, as explained here.
4. Once you have included all your Z-Wave devices, then reconnect the dongle to the Z-Wave Home Gateway.
5. When you reconnect the dongle, I will show you any new devices you added in the order you added them. You need to give them a descriptive name, like 'Black table lamp' and pick the room they are in. If you have a lot of Z-Wave devices to add, you can add them a few at a time so that when you go to give them names you do not have too many new devices at once. You can click the 'Add Z-Wave devices' button at any time to add new Z-Wave devices.
Note: If you're having trouble adding devices, those devices probably need to be reset, as here: troubleshooting. Also, if you have unsaved changes, meaning the save button in the upper left is RED, you won't see your new devices until you first save your changes.
