Networking Setup:Vera WiFi in Client Mode
From MiOS
(Difference between revisions)
| Line 1: | Line 1: | ||
If you allready have an wireless network adn you want to connect vera to it, you'll need to set Vera WiFi in Client mode. TO do that follow the following steps: | If you allready have an wireless network adn you want to connect vera to it, you'll need to set Vera WiFi in Client mode. TO do that follow the following steps: | ||
| + | Step0. Unplug any cables from the WAN Port | ||
Step1. Open Vera Web Admin page: http://findvera.com | Step1. Open Vera Web Admin page: http://findvera.com | ||
Step2. Go to Advanced -> Net&wi-fi | Step2. Go to Advanced -> Net&wi-fi | ||
Revision as of 22:32, 7 November 2008
If you allready have an wireless network adn you want to connect vera to it, you'll need to set Vera WiFi in Client mode. TO do that follow the following steps:
Step0. Unplug any cables from the WAN Port Step1. Open Vera Web Admin page: http://findvera.com Step2. Go to Advanced -> Net&wi-fi Step3. Set: - Firewall to No Firewall (bridge) - Dhcp Server: off Press Save&Applay Step4. Go to Advanced -> Net&wi-fi -> Advanced Configurations If you haven't setup any users, login with root ( by default there is no password) Step5. Go to Network -> Wireless Step6. Wireless Adapter wl0 Configuration Set Radio to On and Channel to Auto Step7. Wireless Virtual Adaptor Configuration for Wireless Card wl0 Set Mode to Client Set ESSID, Encryption Type, according to your existing wireless network Step8. Press Save && Applay Changes
