EtherRain Sprinkler Controller

From MiOS
(Difference between revisions)
Jump to: navigation, search
Line 11: Line 11:
 
** User and Password - update, or leave default values if you haven't changed them on the controller
 
** User and Password - update, or leave default values if you haven't changed them on the controller
 
* Save
 
* Save
 +
 +
[[Image:EtherRain-vars.png]]
  
 
Now you can click '''On''' to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero.
 
Now you can click '''On''' to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero.
 
It will stop automatically once irrigation cycle completed.
 
It will stop automatically once irrigation cycle completed.
 
'''Off''' button will stop irrigation cycle   
 
'''Off''' button will stop irrigation cycle   
 
 
 
[[Image:EtherRain-vars.png]]
 
 
  
 
[[Image:EtherRain-basic.png‎]]
 
[[Image:EtherRain-basic.png‎]]

Revision as of 02:45, 30 August 2009

Etherrain8.jpg EtherRain Sprinkler Controller allows controlling of up to 8 regular 24V irrigation valves.

To control Etherrain from Vera the following steps are required

  • Create Etherrain device as sual, assign a room, and click Save
  • Once reloaded, go to Variables, and enter the required parameters as following
    • IP address of the Etherrain controller
    • StartDelay - optional delay, in minutes, for irrigation cycle, set to zero if not required
    • Valve1-9 - irrigation time for each valve, in minutes, leave zero for not used valves.
    • User and Password - update, or leave default values if you haven't changed them on the controller
  • Save

EtherRain-vars.png

Now you can click On to start irrigation cycle - controller will subsequently activate all valves with time set greater then zero. It will stop automatically once irrigation cycle completed. Off button will stop irrigation cycle

EtherRain-basic.png

Personal tools