Everspring Sensors

From MiOS
(Difference between revisions)
Jump to: navigation, search
 
(10 intermediate revisions by one user not shown)
Line 1: Line 1:
−
= <span style="color: rgb(255, 0, 0);">'''Under Construction'''</span> =
+
[[Category:Hardware]]
−
 
+
−
This page is incomplete.
+
−
 
+
 
= '''Everspring Sensors'''  =
 
= '''Everspring Sensors'''  =
  
−
== Inclusion:<br>  ==
+
== Inclusion/Exclusion<br>  ==
  
−
To include an Everspring device with Vera, set your Vera to include mode, and then press ESC/[L] on the Everspring device 3 times within 1.5 seconds.&nbsp; The [L] icon on the Everspring device will flash.&nbsp; Be patient.&nbsp; It can sometimes take a bit of time for Vera's UI to update with data from the sensor.&nbsp; It may help to reload Vera's UI and refresh your browser window after inclusion. [NOTE:] Some users have found that it's best to exclude a new device before including it into their network.<br>
+
To include an Everspring device with Vera, set your Vera to include mode, and then press ESC/[L] on the Everspring device 3 times within 1.5 seconds.&nbsp; The [L] icon on the Everspring device will flash.&nbsp; Be patient.&nbsp; It can sometimes take a bit of time for Vera's UI to update with data from the sensor.&nbsp; It may help to reload Vera's UI and refresh your browser window after inclusion. [NOTE:] Some users have found that it's best to <u>exclude</u> a new device before including it into their network.<br>  
−
 
+
−
<br>  
+
  
 
=== Device File(s) known to work with Everspring Sensors:  ===
 
=== Device File(s) known to work with Everspring Sensors:  ===
  
−
{| width="100%" cellspacing="1" cellpadding="1" border="1"
+
{| width="100%" cellspacing="1" cellpadding="1" border="1" align="left"
 
|-
 
|-
−
|  
+
! scope="col" |  
−
'''Device'''
+
'''Device'''  
  
−
|  
+
! scope="col" |  
 
'''Device File(s) Known to Work'''<br>  
 
'''Device File(s) Known to Work'''<br>  
  
−
|  
+
! scope="col" |  
 
'''Device Files not Known to Work/<br>Known not to Work'''<br>  
 
'''Device Files not Known to Work/<br>Known not to Work'''<br>  
  
Line 30: Line 25:
 
|-
 
|-
 
| '''ST815 Illumination Sensor with LCD''' - Vera (UI5) includes the ST815 sensor as a Generic IO device (D_GenericIO1.xml).  
 
| '''ST815 Illumination Sensor with LCD''' - Vera (UI5) includes the ST815 sensor as a Generic IO device (D_GenericIO1.xml).  
−
| D_ComboDevice1.xml - the ST815's current value does not display in Vera's UI.<br>
 
 
|  
 
|  
−
D_GenericIO1.xml (not known to work)<br>D_LightSensor1.xml (not known to work)<br>  
+
'''D_ComboDevice1.xml '''- the ST815's current value does not display in Vera's UI.
 +
 
 +
'''D_LightSensor1.xml''' - the ST815's current value will display in Vera's UI. <br>
 +
 
 +
|
 +
D_GenericIO1.xml (not known to work)<br><br>  
  
 
|}
 
|}
  
−
<br>
+
<br>  
  
−
== Setting Device Parameters: ==
+
== Setting Device Parameters  ==
  
 
To set device parameters on Everspring devices:  
 
To set device parameters on Everspring devices:  
Line 44: Line 43:
 
#In Vera's UI, click on the wrench for the device and select the 'Device Options' tab (see below for an example of ST815 parameter settings).&nbsp;  
 
#In Vera's UI, click on the wrench for the device and select the 'Device Options' tab (see below for an example of ST815 parameter settings).&nbsp;  
 
#Select 'Add configuration settings' and add your first parameter (you can add only those parameters that you want to set).&nbsp;  
 
#Select 'Add configuration settings' and add your first parameter (you can add only those parameters that you want to set).&nbsp;  
 +
#Repeat step two for each parameter that you want to set.
 
#After you have added the parameter values that you want to set within Vera, select SAVE, and the refresh your browser.&nbsp;  
 
#After you have added the parameter values that you want to set within Vera, select SAVE, and the refresh your browser.&nbsp;  
−
#Wake up the Everspring device (for example, on the ST815 Illumination Sensor, press the ESC/[L] button 3 times within 1.5 seconds).&nbsp; The device will stay awake for 10 seconds.  
+
#Browse back to the device and select it's 'Settings' tab.
 +
#Wake up the Everspring device (for example, on the ST815 Illumination Sensor, press the ESC/[L] button 3 times within 1.5 seconds). The device will stay awake for 10 seconds.  
 
#Select 'Configure node right now' on the device's 'Settings' tab within Vera.
 
#Select 'Configure node right now' on the device's 'Settings' tab within Vera.
  
−
<br>
+
Be patient.&nbsp; It may take a bit of time for Vera to update with new information.&nbsp; Once sucessfully configured, you will see values under the "Current Value" column on the 'Device Options' tab.<br>  
−
 
+
−
<br>  
+
  
 
[[Image:Device Parameters Everspring.jpg|Example of Parameter Settings for ST815 Under UI5]]  
 
[[Image:Device Parameters Everspring.jpg|Example of Parameter Settings for ST815 Under UI5]]  
Line 56: Line 55:
 
<br>  
 
<br>  
  
−
<br>
+
The device parameters that each Everspring device will support varies by type of device.&nbsp; The table below lists the parameters for each type of Everyspring Sensor.
  
 
{| width="100%" cellspacing="1" cellpadding="1" border="1"
 
{| width="100%" cellspacing="1" cellpadding="1" border="1"
 
|-
 
|-
−
! align="left" scope="col" colspan="7" |  
+
! scope="col" |  
 +
Device<br>Parameter
  
−
<br>
+
! scope="col" | Function  
−
|-
+
! scope="col" | Size<br>(Byte)  
−
! scope="col" | Parameter
+
−
! scope="col" | Function
+
−
! scope="col" | Size<br>(Byte)
+
 
! scope="col" | Value  
 
! scope="col" | Value  
 
! scope="col" | Unit  
 
! scope="col" | Unit  
Line 75: Line 72:
 
|-
 
|-
 
! scope="col" | 1  
 
! scope="col" | 1  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
 
! scope="col" | <br>
 
! scope="col" | <br>
 
|-
 
|-
−
! scope="col" | 2<br>
+
! scope="col" | 2<br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
 
! scope="col" | <br>
 
! scope="col" | <br>
 
|-
 
|-
−
! scope="col" | 3<br>
+
! scope="col" | 3<br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
−
! scope="col" | <br>
+
! scope="col" | <br>  
 
! scope="col" | <br>
 
! scope="col" | <br>
 
|-
 
|-
−
! scope="col" | ...
+
! scope="col" | ...  
 
! scope="col" |  
 
! scope="col" |  
 
! scope="col" |  
 
! scope="col" |  
Line 158: Line 155:
  
 
<br>  
 
<br>  
 +
 +
== Luup Variables  ==
 +
 +
The Luup variables supported by each device vary by type of device.
 +
 +
{| width="100%" cellspacing="1" cellpadding="1" border="1" align="left"
 +
|-
 +
! scope="col" | Variable Name
 +
! scope="col" | Value
 +
|-
 +
| colspan="2" | Everspring ST815 Illumination Sensor <br>
 +
|-
 +
| ''urn:micasaverde-com:serviceId:GenericSensor1:CurrentLevel''
 +
|
 +
|-
 +
| ''urn:micasaverde-com:serviceId:GenericSensor1:EnergyMetering1''
 +
| Reports the energy level based on user defined value (entered into device settings) -- UserSuppliedWattage.
 +
|-
 +
| ''urn:micasaverde-com:serviceId:LightSensor1:CurrentLevel''
 +
| Reports the current illumination level.
 +
|-
 +
| ''urn:upnp-org:serviceId:SwitchPower1:Status''
 +
| The Everspring illumination sensor can trigger events based on a value defined within the sensor itself. When the trigger value is reached, the sensor will report status 1.
 +
|-
 +
| ''urn:upnp-org:serviceId:SwitchPower1:Target''
 +
|
 +
|}
 +
 +
<br>
 +
 +
<br>
 +
 +
x
  
 
<br>
 
<br>
  
−
== Known Issues: ==
+
== Command Class Groups  ==
 +
 
 +
== Known Issues  ==
 +
 
 +
There are some known issues with using Everspring devices with Vera (discuss polling, auto reports, etc.)
  
−
There are some known issues with using Everspring devices with Vera (discuss polling, auto reports, etc.)
+
=== Polling devices through Luup code ===

Latest revision as of 02:51, 15 June 2013

Contents

[edit] Everspring Sensors

[edit] Inclusion/Exclusion

To include an Everspring device with Vera, set your Vera to include mode, and then press ESC/[L] on the Everspring device 3 times within 1.5 seconds.  The [L] icon on the Everspring device will flash.  Be patient.  It can sometimes take a bit of time for Vera's UI to update with data from the sensor.  It may help to reload Vera's UI and refresh your browser window after inclusion. [NOTE:] Some users have found that it's best to exclude a new device before including it into their network.

[edit] Device File(s) known to work with Everspring Sensors:

Device

Device File(s) Known to Work

Device Files not Known to Work/
Known not to Work

ST814 Temperature/Humidity Sensor -


ST815 Illumination Sensor with LCD - Vera (UI5) includes the ST815 sensor as a Generic IO device (D_GenericIO1.xml).

D_ComboDevice1.xml - the ST815's current value does not display in Vera's UI.

D_LightSensor1.xml - the ST815's current value will display in Vera's UI.

D_GenericIO1.xml (not known to work)


[edit] Setting Device Parameters

To set device parameters on Everspring devices:

  1. In Vera's UI, click on the wrench for the device and select the 'Device Options' tab (see below for an example of ST815 parameter settings). 
  2. Select 'Add configuration settings' and add your first parameter (you can add only those parameters that you want to set). 
  3. Repeat step two for each parameter that you want to set.
  4. After you have added the parameter values that you want to set within Vera, select SAVE, and the refresh your browser. 
  5. Browse back to the device and select it's 'Settings' tab.
  6. Wake up the Everspring device (for example, on the ST815 Illumination Sensor, press the ESC/[L] button 3 times within 1.5 seconds). The device will stay awake for 10 seconds.
  7. Select 'Configure node right now' on the device's 'Settings' tab within Vera.

Be patient.  It may take a bit of time for Vera to update with new information.  Once sucessfully configured, you will see values under the "Current Value" column on the 'Device Options' tab.

Example of Parameter Settings for ST815 Under UI5


The device parameters that each Everspring device will support varies by type of device.  The table below lists the parameters for each type of Everyspring Sensor.

Device
Parameter

Function Size
(Byte) 		Value Unit Default Set
(Factory Default) 		Description
Everspring ST814 Temperature/Humidity Sensor
1





2





3





...
Everspring ST815 Illumination Sensor with LCD
1 Basic Set Level 1 dec 0-99 Percent of Brightness (Dimmer Level) 99 (99) Set basic set value to be on (or set Lux Level)/off.
0: Disable
2 Lux Trigger - On Value 2 dec 30-1000 or 0 LUX 300 (0) Set Lux trigger-ON Value to be _Lux.
0: Clear Lux trigger-ON value
3 Lux Trigger - Off Value 2 dec 30-1000 or 0 LUX 500 (0) Set Lux trigger-OFF Value to be _Lux.
0: Clear Lux trigger-OFF value
4 Lux Trigger - Off (Timer Value) 2 dec 1-480 or 0 Minute 240 (0) Set Lux trigger-OFF Value to be _Lux.
0: Clear Lux trigger-OFF value
5 Auto Report (Time Interval) 2 dec 1-1439 or 0 Minutes 0 (0) Set auto report time interval to be _mins.
6 Auto Report (Lux Interval) 2 dec 30-1000 or 0 LUX 0 (0) Enable auto report.
0: Disable auto report.


[edit] Luup Variables

The Luup variables supported by each device vary by type of device.

Variable Name Value
Everspring ST815 Illumination Sensor
urn:micasaverde-com:serviceId:GenericSensor1:CurrentLevel
urn:micasaverde-com:serviceId:GenericSensor1:EnergyMetering1 Reports the energy level based on user defined value (entered into device settings) -- UserSuppliedWattage.
urn:micasaverde-com:serviceId:LightSensor1:CurrentLevel Reports the current illumination level.
urn:upnp-org:serviceId:SwitchPower1:Status The Everspring illumination sensor can trigger events based on a value defined within the sensor itself. When the trigger value is reached, the sensor will report status 1.
urn:upnp-org:serviceId:SwitchPower1:Target



x


[edit] Command Class Groups

[edit] Known Issues

There are some known issues with using Everspring devices with Vera (discuss polling, auto reports, etc.)

[edit] Polling devices through Luup code

Retrieved from "http://wiki.mios.com/index.php?title=Everspring_Sensors&oldid=6480"
Personal tools