Luup Plugins

From MiOS
(Difference between revisions)
Jump to: navigation, search
 
(9 intermediate revisions by 5 users not shown)
Line 1: Line 1:
If you didn't already come from the [[Luup_Intro]] page, start there to see what Luup Plugins are intended for.
+
[[Category:Development]]
 +
If you didn't already come from the [[Luup_Intro]] page, start there to see what Luup Plugins are intended for. If you want to see what the Plugin files do, then go to the [[Plugin_Creation_Tutorial|Plugin Creation Tutorial]]
  
 
==Introduction to UPnP==
 
==Introduction to UPnP==
  
UPnP (Universal plug and play) is the industry-standard way to communicate with devices.  In UPnP the device that is doing the controlling (ie the remote control) is called a UPnP Control Point.  The device which can be controlled is the UPnP Device.  You describe the capabilities of a UPnP Device and tell the UPnP Control Points what the device can do by creating 2 types of XML files: 1) a single device specification file which has basic information on your device such as the manufacturer and model, and 2) one or more service specification files which describe a service.  In UPnP a "service" is a list of variables and actions.  Variables describe the current state of the device and actions describe what you can do with the device.   
+
UPnP (Universal plug and play) is the industry-standard way to communicate with devices, see also [http://en.wikipedia.org/wiki/Upnp wikipedia] and [http://upnp.org upnp.org].  In UPnP the device that is doing the controlling (ie the remote control) is called a UPnP Control Point.  The device which can be controlled is the UPnP Device.  You describe the capabilities of a UPnP Device and tell the UPnP Control Points what the device can do by creating 2 types of data files in [http://en.wikipedia.org/wiki/Xml XML] format: 1) a single device specification file which has basic information on your device such as the manufacturer and model, and 2) one or more service specification files which describe a service.  In UPnP a "service" is a list of variables and actions.  Variables describe the current state of the device and actions describe what you can do with the device.   
  
 
For example, a common service is "SwitchPower".  This service describes the ability to turn something on and off.  The main variable in the service is called "Status", and it has a value of 0 if the device is currently off or 1 if it's currently on.  The main action in the service is called "SetTarget" which is how you turn the power on or off.  The "SetTarget" action has an argument called "newTargetValue" which can be either 0 or 1 to indicate if the device should be turned on or off.  Variables, then, are outgoing data from the UPnP Device to the UPnP Control Point, and actions are incoming data from the UPnP Control Point to the UPnP Device.  Let's say your UPnP device is a light switch.  The UPnP Control Point is perhaps a touch-screen web pad, and it will display an icon of a light switch to let the user control your UPnP light switch.  The Control Point will first ask the UPnP light switch for the current value of the "Status" variable.  If the variable is currently 1, the Control Point will display the light switch in the 'on' position.  Now, if the user hits the 'off' button on the UPnP control point it sends the UPnP light switch a "SetTarget" action with the argument "newTargetValue" equals 0.  After the light switch successfully turns off, the variable "Status" will change to 0 so anytime a UPnP control point that wants to know if the light is on or off can ask the light switch for the current value of the "Status" variable.
 
For example, a common service is "SwitchPower".  This service describes the ability to turn something on and off.  The main variable in the service is called "Status", and it has a value of 0 if the device is currently off or 1 if it's currently on.  The main action in the service is called "SetTarget" which is how you turn the power on or off.  The "SetTarget" action has an argument called "newTargetValue" which can be either 0 or 1 to indicate if the device should be turned on or off.  Variables, then, are outgoing data from the UPnP Device to the UPnP Control Point, and actions are incoming data from the UPnP Control Point to the UPnP Device.  Let's say your UPnP device is a light switch.  The UPnP Control Point is perhaps a touch-screen web pad, and it will display an icon of a light switch to let the user control your UPnP light switch.  The Control Point will first ask the UPnP light switch for the current value of the "Status" variable.  If the variable is currently 1, the Control Point will display the light switch in the 'on' position.  Now, if the user hits the 'off' button on the UPnP control point it sends the UPnP light switch a "SetTarget" action with the argument "newTargetValue" equals 0.  After the light switch successfully turns off, the variable "Status" will change to 0 so anytime a UPnP control point that wants to know if the light is on or off can ask the light switch for the current value of the "Status" variable.
Line 11: Line 12:
 
The UPnP forum is an industry consortium that approves specifications for UPnP devices.  They have already approved standards for SwitchPower, Dimming, and so on.  We will not want to modify these device or service specifications.  We use them as they were ratified by the committee because that is what UPnP Control Points will be expecting.  However there are lots of devices which the UPnP forum has not yet come up with a standard for.  In this case each vendor can come up with his own solution.  However, if there is an existing device+service specification that is already in use, particularly by a large company in the industry, we should use their device+service specifications (ie XML files) whenever possible since there are probably already UPnP Control Points out there that know how to talk to them.
 
The UPnP forum is an industry consortium that approves specifications for UPnP devices.  They have already approved standards for SwitchPower, Dimming, and so on.  We will not want to modify these device or service specifications.  We use them as they were ratified by the committee because that is what UPnP Control Points will be expecting.  However there are lots of devices which the UPnP forum has not yet come up with a standard for.  In this case each vendor can come up with his own solution.  However, if there is an existing device+service specification that is already in use, particularly by a large company in the industry, we should use their device+service specifications (ie XML files) whenever possible since there are probably already UPnP Control Points out there that know how to talk to them.
  
==Introduction to Luup plugins==
+
A list of UPnP ratified device and service files is available at [http://upnp.org/resources/default.asp] and the .zip file there includes the complete specs for UPnP in the document: UPnP-arch-DeviceArchitecture-v1 1-20081015.pdf
  
The UPnP specifications define what the XML files look like and how a UPnP Control Point talks to a UPnP Device to get the current Variables and to send the device Actions.  But that's where UPnP ends; it does not define the implementation, which is to say, how the device will implement the action.  Normally UPnP devices write programming code to handle the implementation.  Luup instead lets you store the implementation in a 3rd type of XML file we call the implementation file.  In the implementation file you tell Luup what to do when it receives an action from a UPnP Control Point.  The implementation file can contain infrared codes which Loop will send when the action comes in, binary data which Luup will send out a serial port, or some Lua code that Luup will run.  The Lua code can set the current value of the variables for the device.
+
== Introduction to Luup plugins ==
  
Luup handles all the complexities of the UPnP protocol.  And the web-based Luup plugin generator handles all the complexities of XML (coming soon).  So all you do is fill in the form which has basic information about your device, like the manufacturer and model, and the generator creates the UPnP Device specification for you.  You can then check off which services your device implements, such as "SwitchPower" if it's something that can be turned on and off.  If your device has new capabilities that aren't already in an existing service, the generator let's you create a new service by describing the actions your device implements, like "Brightness Up", or "Sensor Arm", etc. Lastly, the web generator let's you specify what to do when the action comes in. This is saved in the implementation file.
+
The UPnP specifications define what the XML files look like and how a UPnP Control Point talks to a UPnP Device to get the current Variables and to send the device Actions. But that's where UPnP ends; it does not define the implementation, which is to say, how the device will implement the action. Normally UPnP devices write programming code to handle the implementation. Luup instead lets you store the implementation in a 3rd type of XML file we call the implementation file. In the implementation file you tell Luup what to do when it receives an action from a UPnP Control Point. The implementation file can contain infrared codes which Luup will send when the action comes in, binary data which Luup will send out a serial port, or some Lua code that Luup will run. The Lua code can set the current value of the variables for the device.  
  
There is not necessarily a 1:1 relationship between an implementation file and either device or specification files. For example, you may create a device which has some of the Lua code in one implementation file, and some other Lua code in another implementation file.  The same implementation file can contain both infrared codes, serial data, and Lua code.
+
Luup handles all the complexities of the UPnP protocol. And the web-based Luup plugin generator handles all the complexities of XML (coming soon). So all you do is fill in the form which has basic information about your device, like the manufacturer and model, and the generator creates the UPnP Device specification for you. You can then check off which services your device implements, such as "SwitchPower" if it's something that can be turned on and off. If your device has new capabilities that aren't already in an existing service, the generator let's you create a new service by describing the actions your device implements, like "Brightness Up", or "Sensor Arm", etc. Lastly, the web generator let's you specify what to do when the action comes in. This is saved in the implementation file.  
  
Luup also supports the concept of parent-child, or embedded, devices. For example, the Global Cache gc-100 is an ethernet device that contains a couple serial ports, some relay switches, some infrared transmit ports, and some on/off input sensors. Each relay/sensor/ir/serial port is logically a separate device, since each one can do something distinct. One relay could be connected to a doorbell, the other to a siren. So, in Luup there is one parent device called the "gc100", which actually doesn't have any UPnP services at all, but it has child devices for each of the sensors/relays/ports. The relays are logically like on/off switches, so rather than creating our own service, we use the standard UPnP device for a binary switch with the standard UPnP service "SwitchPower". This way any UPnP control point will see the relays and, without any custom work for the gc100, the control point can show them to the user as an on/off switch. There are other device+service files for the inputs and ports. In Luup you have the concept of a parent device being able to be responsible for the child devices. So, the way we implemented the gc100 is that the parent device has no UPnP services, but it does have a single implementation file "I_GC100.xml", which tells Luup how to implement all the actions from all the services that it's child devices may have. So in this case, there is one implementation file for many devices and services. We could have broken this into separate implemenation files, for example one for each service. However since the implementation is specific to the gc100 and not likely to be re-usable with another device, we just put all the gc100 implementation in a single file. You may want to add support for some other type of on/off switch and you could do that by using the same standard UPnP device+specification files, but instead you would create your own implementation file. The UPnP Control Point will never know the difference; it just sees a standard a UPnP light switch device and sends the 'on/off' actions the same way.
+
There is not necessarily a 1:1 relationship between an implementation file and either device or specification files. For example, you may create a device which has some of the Lua code in one implementation file, and some other Lua code in another implementation file. The same implementation file can contain both infrared codes, serial data, and Lua code.
 +
 
 +
Luup also supports the concept of parent-child, or embedded, devices. For example, the Global Cache gc-100 is an ethernet device that contains a couple serial ports, some relay switches, some infrared transmit ports, and some on/off input sensors. Each relay/sensor/ir/serial port is logically a separate device, since each one can do something distinct. One relay could be connected to a doorbell, the other to a siren. So, in Luup there is one parent device called the "gc100", which actually doesn't have any UPnP services at all, but it has child devices for each of the sensors/relays/ports. The relays are logically like on/off switches, so rather than creating our own service, we use the standard UPnP device for a binary switch with the standard UPnP service "SwitchPower". This way any UPnP control point will see the relays and, without any custom work for the gc100, the control point can show them to the user as an on/off switch. There are other device+service files for the inputs and ports. In Luup you have the concept of a parent device being able to be responsible for the child devices. So, the way we implemented the gc100 is that the parent device has no UPnP services, but it does have a single implementation file "I_GC100.xml", which tells Luup how to implement all the actions from all the services that its child devices may have. So in this case, there is one implementation file for many devices and services. We could have broken this into separate implemenation files; for example, one for each service. However since the implementation is specific to the gc100 and not likely to be re-usable with another device, we just put all the gc100 implementation in a single file. You may want to add support for some other type of on/off switch and you could do that by using the same standard UPnP device+specification files, but instead you would create your own implementation file. The UPnP Control Point will never know the difference; it just sees a standard a UPnP light switch device and sends the 'on/off' actions the same way.
 +
 
 +
==IO Port==
 +
 
 +
Most Luup plugins are simply interfaces to talk to an external piece of hardware using infrared (a/v devices like TV's), RS232 (high-end a/v gear, alarm panels, etc.), Network (IP cameras and other IP devices), and a handful of other connections like RS485.  See [[Luup_IO_Device]] to learn how Luup handles automatically sending data to and receiving data from these devices.
 +
 
 +
==The Luup configuration file==
 +
 
 +
See [[Luup_Configuration_File]] to learn how data for your Luup plugin, like the IP address, baud rate, values of UPnP Variables, etc., are stored.
  
 
==The web-based Luup plugin generator==
 
==The web-based Luup plugin generator==
  
This is coming soon.  In the meantime, see [[Luup_Plugins_ByHand]] to see how to create the plugins by hand.
+
This is coming soon, and will allow you to create Luup plugins without knowledge of XML or UPnP using a fill-in-the-blanks web form and an infrared learning tool for control audio/video devices.  In the meantime, see [[Luup_Plugins_ByHand]] to see how to create the plugins by hand.

Latest revision as of 04:55, 13 June 2013

If you didn't already come from the Luup_Intro page, start there to see what Luup Plugins are intended for. If you want to see what the Plugin files do, then go to the Plugin Creation Tutorial

Contents

[edit] Introduction to UPnP

UPnP (Universal plug and play) is the industry-standard way to communicate with devices, see also wikipedia and upnp.org. In UPnP the device that is doing the controlling (ie the remote control) is called a UPnP Control Point. The device which can be controlled is the UPnP Device. You describe the capabilities of a UPnP Device and tell the UPnP Control Points what the device can do by creating 2 types of data files in XML format: 1) a single device specification file which has basic information on your device such as the manufacturer and model, and 2) one or more service specification files which describe a service. In UPnP a "service" is a list of variables and actions. Variables describe the current state of the device and actions describe what you can do with the device.

For example, a common service is "SwitchPower". This service describes the ability to turn something on and off. The main variable in the service is called "Status", and it has a value of 0 if the device is currently off or 1 if it's currently on. The main action in the service is called "SetTarget" which is how you turn the power on or off. The "SetTarget" action has an argument called "newTargetValue" which can be either 0 or 1 to indicate if the device should be turned on or off. Variables, then, are outgoing data from the UPnP Device to the UPnP Control Point, and actions are incoming data from the UPnP Control Point to the UPnP Device. Let's say your UPnP device is a light switch. The UPnP Control Point is perhaps a touch-screen web pad, and it will display an icon of a light switch to let the user control your UPnP light switch. The Control Point will first ask the UPnP light switch for the current value of the "Status" variable. If the variable is currently 1, the Control Point will display the light switch in the 'on' position. Now, if the user hits the 'off' button on the UPnP control point it sends the UPnP light switch a "SetTarget" action with the argument "newTargetValue" equals 0. After the light switch successfully turns off, the variable "Status" will change to 0 so anytime a UPnP control point that wants to know if the light is on or off can ask the light switch for the current value of the "Status" variable.

In the UPnP device's device description xml file there is a list of the services that the device implements with a cross reference to the service file. Whenever possible a service should be as small and re-usable as possible so other devices can use the same service file without creating the service's again from scratch. For example, there are both dimmable light switches, and simple on/off switches. Both kinds of switches support the ability to turn on and off, dimmable ones just add the ability to dim also. So, the most efficient thing to do is have a service called "SwitchPower" which describes the action to turn the switch on and off, and to have a separate service called "Dimming" which describes the action to dim the light. The on/off switch will support only the "SwitchPower" service, and the dimmable switch will support both the "SwitchPower" and the "Dimming" service. This is better than creating a "Dimming" service which does both on/off and dimming because if you did that, the maker of a UPnP control point would need to implement 2 different actions for the basic on/off. You do not want to make an individual service do more than one thing.

The UPnP forum is an industry consortium that approves specifications for UPnP devices. They have already approved standards for SwitchPower, Dimming, and so on. We will not want to modify these device or service specifications. We use them as they were ratified by the committee because that is what UPnP Control Points will be expecting. However there are lots of devices which the UPnP forum has not yet come up with a standard for. In this case each vendor can come up with his own solution. However, if there is an existing device+service specification that is already in use, particularly by a large company in the industry, we should use their device+service specifications (ie XML files) whenever possible since there are probably already UPnP Control Points out there that know how to talk to them.

A list of UPnP ratified device and service files is available at [1] and the .zip file there includes the complete specs for UPnP in the document: UPnP-arch-DeviceArchitecture-v1 1-20081015.pdf

[edit] Introduction to Luup plugins

The UPnP specifications define what the XML files look like and how a UPnP Control Point talks to a UPnP Device to get the current Variables and to send the device Actions. But that's where UPnP ends; it does not define the implementation, which is to say, how the device will implement the action. Normally UPnP devices write programming code to handle the implementation. Luup instead lets you store the implementation in a 3rd type of XML file we call the implementation file. In the implementation file you tell Luup what to do when it receives an action from a UPnP Control Point. The implementation file can contain infrared codes which Luup will send when the action comes in, binary data which Luup will send out a serial port, or some Lua code that Luup will run. The Lua code can set the current value of the variables for the device.

Luup handles all the complexities of the UPnP protocol. And the web-based Luup plugin generator handles all the complexities of XML (coming soon). So all you do is fill in the form which has basic information about your device, like the manufacturer and model, and the generator creates the UPnP Device specification for you. You can then check off which services your device implements, such as "SwitchPower" if it's something that can be turned on and off. If your device has new capabilities that aren't already in an existing service, the generator let's you create a new service by describing the actions your device implements, like "Brightness Up", or "Sensor Arm", etc. Lastly, the web generator let's you specify what to do when the action comes in. This is saved in the implementation file.

There is not necessarily a 1:1 relationship between an implementation file and either device or specification files. For example, you may create a device which has some of the Lua code in one implementation file, and some other Lua code in another implementation file. The same implementation file can contain both infrared codes, serial data, and Lua code.

Luup also supports the concept of parent-child, or embedded, devices. For example, the Global Cache gc-100 is an ethernet device that contains a couple serial ports, some relay switches, some infrared transmit ports, and some on/off input sensors. Each relay/sensor/ir/serial port is logically a separate device, since each one can do something distinct. One relay could be connected to a doorbell, the other to a siren. So, in Luup there is one parent device called the "gc100", which actually doesn't have any UPnP services at all, but it has child devices for each of the sensors/relays/ports. The relays are logically like on/off switches, so rather than creating our own service, we use the standard UPnP device for a binary switch with the standard UPnP service "SwitchPower". This way any UPnP control point will see the relays and, without any custom work for the gc100, the control point can show them to the user as an on/off switch. There are other device+service files for the inputs and ports. In Luup you have the concept of a parent device being able to be responsible for the child devices. So, the way we implemented the gc100 is that the parent device has no UPnP services, but it does have a single implementation file "I_GC100.xml", which tells Luup how to implement all the actions from all the services that its child devices may have. So in this case, there is one implementation file for many devices and services. We could have broken this into separate implemenation files; for example, one for each service. However since the implementation is specific to the gc100 and not likely to be re-usable with another device, we just put all the gc100 implementation in a single file. You may want to add support for some other type of on/off switch and you could do that by using the same standard UPnP device+specification files, but instead you would create your own implementation file. The UPnP Control Point will never know the difference; it just sees a standard a UPnP light switch device and sends the 'on/off' actions the same way.

[edit] IO Port

Most Luup plugins are simply interfaces to talk to an external piece of hardware using infrared (a/v devices like TV's), RS232 (high-end a/v gear, alarm panels, etc.), Network (IP cameras and other IP devices), and a handful of other connections like RS485. See Luup_IO_Device to learn how Luup handles automatically sending data to and receiving data from these devices.

[edit] The Luup configuration file

See Luup_Configuration_File to learn how data for your Luup plugin, like the IP address, baud rate, values of UPnP Variables, etc., are stored.

[edit] The web-based Luup plugin generator

This is coming soon, and will allow you to create Luup plugins without knowledge of XML or UPnP using a fill-in-the-blanks web form and an infrared learning tool for control audio/video devices. In the meantime, see Luup_Plugins_ByHand to see how to create the plugins by hand.

Personal tools