OpenHAB

Latest revision as of 20:46, 26 January 2015

[edit] openHAB Downloads

http://www.openhab.org/downloads.html

[edit] openHAB MiOS binding

https://github.com/openhab/openhab/tree/master/bundles/binding/org.openhab.binding.mios

[edit] Tools

[edit] Creating openHAB configuration files (items, sitemap, rrd4j persistence)

Adjust unit_name and output_directory.

[edit] items

https://github.com/openhab/openhab/wiki/Explanation-of-items

Place *.items in: /openHAB/runtime/configurations/items

[edit] sitemap

https://github.com/openhab/openhab/wiki/Explanation-of-Sitemaps

Place *.sitemap in: /openHAB/runtime/configurations/sitemaps

[edit] rrd4j persistence

https://github.com/openhab/openhab/wiki/Persistence

Add rrd4j.persist_add to the Items section in /openHAB/runtime/configurations/persistence/rrd4j.persist and make sure that the strategies used are defined in the Strategies section.

[edit] Luup code for MiOS devices

-- by Ap15e
 
local unit_name        = 'house'
local output_directory = '/dataMine'
 
local device_types =
{ [ 'urn:schemas-upnp-org:device:DimmableLight:1'                    ] = { 'Dimmer' , ' [%d]%'    , '<slider>'       , '/service/Dimming1/LoadLevelStatus,command:MAP(miosDimmerCommand.map)' },
  [ 'urn:schemas-upnp-org:device:BinaryLight:1'                      ] = { 'Switch' , ''          , ''               , '/service/SwitchPower1/Status,command:ON=SwitchPower1/SetTarget(newTargetValue=1)|OFF=SwitchPower1/SetTarget(newTargetValue=0),in:MAP(miosSwitchIn.map)' },
  [ 'urn:schemas-micasaverde-com:device:TemperatureSensor:1'         ] = { 'Number' , ' [%.1f °C]', '<temperature>'  , '/service/TemperatureSensor1/CurrentTemperature' },
  [ 'urn:schemas-micasaverde-com:device:HumiditySensor:1'            ] = { 'Number' , ' [%d]%'    , ''               , '/service/HumiditySensor1/CurrentLevel' },
  [ 'urn:schemas-micasaverde-com:device:MotionSensor:1'              ] = { 'Contact', ' [%s]'     , '<contact>'      , '/service/SecuritySensor1/Tripped,in:MAP(miosContactIn.map)' },
  [ 'urn:schemas-micasaverde-com:device:LightSensor:1'               ] = { 'Number' , ' [%.2f]%'  , ''               , '/service/urn:micasaverde-com:serviceId:LightSensor1/CurrentLevel' },
  [ 'urn:schemas-micasaverde-com:device:DoorSensor:1'                ] = { 'Contact', ' [%s]'     , '<contact>'      , '/service/SecuritySensor1/Tripped,in:MAP(miosContactIn.map)' },
  [ 'urn:schemas-upnp-org:device:Heater:1'                           ] = { 'Number' , ' [%.1f °C]', '<temperature>'  , '/service/urn:upnp-org:serviceId:TemperatureSetpoint1_Heat/CurrentSetpoint' },
  [ 'urn:schemas-micasaverde-com:device:UvSensor:1'                  ] = { 'Number' , ' [%d]'     , ''               , '/service/urn:upnp-org:serviceId:UvSensor1/CurrentLevel' },
  [ 'urn:schemas-micasaverde-com:device:RainSensor:1'                ] = { 'Number' , ' [%.1f]'   , ''               , '/service/urn:upnp-org:serviceId:RainSensor1/CurrentTRain' },
  [ 'urn:schemas-micasaverde-com:device:ScaleSensor:1'               ] = { 'Number' , ' [%.1f]'   , ''               , '/service/urn:micasaverde-com:serviceId:ScaleSensor1/Weight' },
  [ 'urn:schemas-micasaverde-com:device:BarometerSensor:1'           ] = { 'Number' , ' [%.2f]hPa', ''               , '/service/urn:upnp-org:serviceId:BarometerSensor1/CurrentPressure' },
  [ 'urn:schemas-micasaverde-com:device:WindSensor:1'                ] = { 'Number' , ' [%.1f]'   , '<wind>'         , '/service/urn:upnp-org:serviceId:WindSensor1/AvgSpeed' },
  [ 'urn:schemas-micasaverde-com:device:SmokeSensor:1'               ] = { 'Contact', ' [%s]'     , '<contact>'      , '/service/urn:upnp-org:serviceId:SmokeSensor1/Tripped,in:MAP(miosContactIn.map)' },
  [ 'urn:demo-micasaverde-com:device:weather:1'                      ] = { 'String' , ' [%s]'     , ''               , '/service/urn:micasaverde-com:serviceId:Weather1/Condition' },
  [ 'urn:schemas-ap15e-com:device:DAD'                               ] = { 'String' , ' [%s]'     , '<sun>'          , '/service/urn:upnp-ap15e-com:serviceId:DAD1/Sunrise_HHMMSS' },
  [ 'urn:schemas-micasaverde-com:device:WindowCovering:1'            ] = { 'Switch' , ''          , '<rollershutter>', '/service/SwitchPower1/Status,command:ON=SwitchPower1/SetTarget(newTargetValue=1)|OFF=SwitchPower1/SetTarget(newTargetValue=0),in:MAP(miosSwitchIn.map)' },
  [ 'urn:schemas-futzle-com:device:CurrentCostEnviR:1'               ] = { 'Number' , ' [%d]'     , '<energy>'       , '/service/urn:micasaverde-com:serviceId:EnergyMetering1/Watts' },
  [ 'urn:schemas-futzle-com:device:CurrentCostEnviRAppliancePhase:1' ] = { 'Number' , ' [%d]'     , '<energy>'       , '/service/urn:micasaverde-com:serviceId:EnergyMetering1/Watts' },
  [ 'urn:schemas-futzle-com:device:CurrentCostEnviRAppliancePulse:1' ] = { 'Number' , ' [%d]'     , '<energy>'       , '/service/urn:micasaverde-com:serviceId:EnergyMetering1/Pulse' },
  [ 'urn:schemas-futzle-com:device:holidayvirtualswitch:1'           ] = { 'Switch' , ''          , ''               , '/service/SwitchPower1/Status,command:ON=SwitchPower1/SetTarget(newTargetValue=1)|OFF=SwitchPower1/SetTarget(newTargetValue=0),in:MAP(miosSwitchIn.map)' } }
 
local device_categories = {
[1] = { 'Interface' },
[2] = { 'Dimmable Light' },
[3] = { 'Switch', { [1] = 'Interior',
                    [2] = 'Exterior',
					[3] = 'In Wall' ,
                    [4] = 'Refrigerator',
                    [5] = 'Garage Door' } },
[4] = {	'Security Sensor', { [1] = 'Door Sensor',
                             [2] = 'Leak Sensor',
                             [3] = 'Motion Sensor',
                             [4] = 'Smoke Sensor',
                             [5] = 'CO Sensor',
                             [6] = 'Glass Break Sensor' } },
[5] = { 'HVAC', { [1] =	'HVAC',
                  [2] = 'Heater' } },
[6] = { 'Camera' },
[7] = { 'Door Lock' },
[8] = { 'Window Covering', { [1] = 'Window Covering',
                            [2] = 'ZRTSI' } },
[9] = { 'Remote Control' },
[10] = { 'IR Transmitter', { [1] = 'IR Transmitter',
                             [2] = 'USB UIRT' } },
[11] = { 'Generic I/O' },
[12] = { 'Generic Sensor' },
[13] = { 'Serial Port' },
[14] = { 'Scene Controller' },
[15] = { 'A/V' },
[16] = { 'Humidity Sensor' },
[17] = { 'Temperature Sensor' },
[18] = { 'Light Sensor' },
[19] = { 'Z-Wave Interface' },
[20] = { 'Insteon Interface' },
[21] = { 'Power Meter' },
[22] = { 'Alarm Panel' },
[23] = { 'Alarm Partition' },
[24] = { 'Siren' } }
 
group_written = {}
 
 
function normalize_name( s )
 
 s = string.gsub( s or '', '[%s-/%.:()]', '_' )
 return '_' .. s
 
end
 
 
function write_items()
 
 outf = io.open( output_directory .. '/' .. unit_name .. '.items', 'w\n' )
 
 outf:write( 'Group Rooms (All)\n' )
 
 for k, v in pairs( luup.rooms )
  do
 
   outf:write( 'Group ' .. normalize_name( tostring( v ) ) .. ' "' .. tostring( v ) .. '" <' .. normalize_name( tostring( v ) ) .. '> (Rooms)\n' )
 
  end
 
 outf:write( 'Group _no_room "no room" <_no_room> (Rooms)\n' )
 
 for k, v in pairs(luup.devices)
  do
 
   dt = device_types[ v.device_type ]
 
   if dt ~= nil
    then
 
     c  = device_categories[ v.category_num ]
 
     if c == nil
      then
 
	   t = 'DEVICE CATEGORY ' .. tostring( v.category_num ) .. '/' .. tostring( v.subcategory_num )
 
	  else
 
        t  = c[ 1 ]
 
        st = c[ 2 ]
 
	    if ( st ~= nil ) and ( v.subcategory_num ~= 0 )
	     then
 
	      t =  t .. ' / ' .. tostring( st[ v.subcategory_num ] or v.subcategory_num )
 
	     end
 
	  end
 
     tn = normalize_name( t )
 
	 if group_written[ t ] == nil
      then
 
	   outf:write( 'Group ' .. tostring( tn ) .. 's "' .. tostring( t ) .. 's" (Rooms)\n' )
       outf:write( 'Number ' .. tostring( tn ) .. 'sChartPeriod\n' )
 
	   group_written[ t ] = tn
 
      end
 
     outf:write( tostring( dt[ 1 ] ) .. ' ' .. normalize_name( tostring( v.description ) ) .. ' "' .. tostring( v.description ) .. tostring( dt[ 2 ] ) .. '" ' .. tostring( dt[ 3 ] ) .. ' (' .. normalize_name( tostring( luup.rooms[ v.room_num ] ) ) .. ',' .. tostring( tn ) .. 's) {mios="unit:' .. tostring( unit_name ) .. ',device:' .. k .. tostring( dt[ 4 ] ) .. '"}\n' )
 
	end
 
  end
 
 outf:close()
 
end -- function write_items()
 
 
function write_sitemap()
 
 outf = io.open( output_directory .. '/' .. unit_name .. '.sitemap', 'w\n' )
 
 outf:write( 'sitemap ' .. unit_name .. ' label="Main Menu"\n' )
 outf:write( '{\n' )
 outf:write( ' Frame {\n' )
 outf:write( '        Group item=Rooms label="Rooms"\n' )
 outf:write( '       }\n' )
 
 for k, v in pairs( group_written )
  do
 
   p = tostring( v ) .. 'sChartPeriod'
 
   i = tostring( v ) .. 's'
 
   outf:write( ' Frame {\n' )
   outf:write( '        Switch item=' .. p .. ' label="Chart Period" mappings=[0="Hour", 1="Day", 2="Week"]\n' )
   outf:write( '        Chart item=' .. i .. ' period=h refresh=6000 visibility=[' .. p .. '==0, ' .. p .. '=="Uninitialized"]\n' )
   outf:write( '        Chart item=' .. i .. ' period=D refresh=30000 visibility=[' .. p .. '==1]\n' )
   outf:write( '        Chart item=' .. i .. ' period=W refresh=30000 visibility=[' .. p .. '==2]\n' )
   outf:write( '       }\n' )
 
  end
 
 outf:write( '}\n' )
 
 outf:close()
 
end -- persistence_rrd4j()
 
 
function write_persistence_rrd4j()
 
 outf = io.open( output_directory .. '/rrd4j.persist_add', 'w' )
 
 for k, v in pairs( group_written )
  do
 
   i = tostring( v ) .. 's'
 
   outf:write( i .. '* : strategy = everyChange, everyMinute, restoreOnStartup\n' )
 
  end
 
 outf:close()
 
end -- write_persistence_rrd4j()
 
 
write_items()
write_sitemap()
write_persistence_rrd4j()

[edit] Creating openHAB rules

https://github.com/openhab/openhab/wiki/Rules

WORK IN PROGRESS (non-functional demo)

Use a real computer to run the following code:

-- by Ap15e
 
local json = require( 'dkjson' ) -- use a json parser that doesn't complain about empty arrays ...
local http = require( 'socket.http' )
 
local url = 'http://192.168.178.116:3480/data_request?id=user_data'
 
function normalize_name( s )
 
 s = string.gsub( s or '', '[%s-/%.:]', '_' )
 return '_' .. s
 
end
 
body, c, l, h = http.request( url )
 
print( '// status line', l )
print( '// h', h )
print( '// c', c )
 
print( '' )
 
if c == 200
 then
 
  local data = json.decode( body )
 
  for k, v in pairs( data.scenes )
   do
 
    print( 'rule ' .. normalize_name( v.name ) )
    print( '// MiOS id: ' .. v.id )
    print( 'when' )
 
	if v.timers ~= nil
	 then
 
	  for i, j in pairs( v.timers )
	   do
 
	    t = tonumber( j.type )
 
	    if t == 1
                then
 
                  print( '  ', j.interval, '  // MiOS type 1' )
 
		else if t == 2
		 then
 
		  print( '  ', j.days_of_week, j.time, '  // MiOS type 2' )
 
                else if t == 3
                 then
 
 		  print( '  ', '// ERROR: Not implemented - MiOS type 3' )
 
                else if t == 4
                 then
 
 		  print( '  ', j.abstime, '  // MiOS type 4' )
 
                 else
 
		  print( '// ERROR: unknown timer, MiOS type: ', tostring( t ) )
 
		  for x, y in pairs( j )
		   do
 
		    print( '//  ', x, y )
 
		   end
 
		 end
		 end
		 end
		 end
 
	   end
 
	 end
 
	if v.triggers ~= nil
         then
 
	  for i, j in pairs( v.triggers )
	   do
 
		print( '// ' .. j.name )
 
		for x, y in pairs( j )
		 do
		  print( '    //', x, y )
		 end
 
	   end
 
	 end
 
    print( 'then' )
    print( 'end' )
    print( '' )
 
   end
 
 else
 
  print( '//http error code:', c )
 
 end

[edit] Tips & Tricks

[edit] Synchronizing Vera's devices with openHAB

Mount ~/openHAB/runtime/configurations/items on Vera (see http://forum.micasaverde.com/index.php/topic,16452.msg125963.html#msg125963) and write the items file via Apps -> Develop Apps -> Edit Startup Lua.

[edit] Building a quarter wave ground plane antenna for Z-Wave

[edit] Parts needed

4x Amphenol B6351B1-ND3G-50

Copper wire

50 Ohm cable BNC male - BNC male

SMA male - BNC female adapter (for Vera3 with antenna mod)

U.FL female - BNC female pigtail cable and U.FL male coaxial connector SMD (for Aeon Z-Stick S2)

[edit] Calculations

length of radials/radiator = speed of light / frequency * velocity factor / 4

For EU frequency: length = 299792458 m/s / 868420000 Hz * 0.95 / 4 = 8.2 cm

OpenHAB

Latest revision as of 20:46, 26 January 2015

Contents

[edit] openHAB Downloads

[edit] openHAB MiOS binding

[edit] Tools

[edit] Creating openHAB configuration files (items, sitemap, rrd4j persistence)

[edit] items

[edit] sitemap

[edit] rrd4j persistence

[edit] Luup code for MiOS devices

[edit] Creating openHAB rules

[edit] Tips & Tricks

[edit] Synchronizing Vera's devices with openHAB

[edit] Building a quarter wave ground plane antenna for Z-Wave

[edit] Parts needed

[edit] Calculations

[edit] Antenna

[edit] Modifying the Aeon Z-Stick S2

[edit] Screenshots

Views

Personal tools

Navigation

Search

Toolbox