ITemp

From MiOS
(Difference between revisions)
Jump to: navigation, search
 
(6 intermediate revisions by 3 users not shown)
Line 1: Line 1:
−
iTEMP is a complex device with Temperature sensor, binary sensor and even thermostat functions. To fully support ZME iTEMP in VERA the following steps are required:  
+
[[Category:Hardware]]
 +
iTEMP is a complex device with Temperature sensor, binary sensor and even thermostat functions. To fully support iTEMP in VERA the following steps are required:  
  
 
*Make sure you have at least version 1.5.622 on your unit  
 
*Make sure you have at least version 1.5.622 on your unit  
−
*Upload the two plugin files into VERA: Go to Apps -> Develop Apps -> Luup Files, click browse and choose each of these files.
+
*Go to Apps -> Install Apps  
−
*After the files were uploaded you have to create a virtual device in Apps -> Develop Apps -> Create Device, type in a Description as the name and as Device file use D_iTemp.xml and as Implementation file I_iTemp.xml. Afterwards click on "Create device"
+
*Login if needed
−
*On the Dashboard you will have a new device with the name you've given and in the Advanced tab of the device, you should have a variable called "iTemp_Devices". You can fill the variable with the device id (Settings tab) of the iTemp device you already included into the network.
+
*Search for "iTemp" and install it
−
*After you save the changes you should get another binary sensor on the Dashboard which should be tripped/untripped according to the tripped state of the master device.
+
*After the plugin is installed a new generic device will be installed
 +
 
 +
[[Image:Generic-plugin.png]]
 +
 
 +
*Go to the Advanced tab and locate the '''iTemp_Devices''' variable
 +
 
 +
[[Image:Itemp variable.png]]
 +
 
 +
*Fill in the Device #ID of the physical iTemp device, which you already included in the network
 +
*You can find the Device #ID by clicking on the wrench key on your physical MiMolite device and you will find it under Settings tab.
 +
[[Image:Device_id.JPG]]
 +
 
 +
*A new child device will be created which you can use in scenes and triggers
 +
 
 +
[[Image:Binary_device.png]]

Latest revision as of 17:56, 10 January 2014

iTEMP is a complex device with Temperature sensor, binary sensor and even thermostat functions. To fully support iTEMP in VERA the following steps are required:

  • Make sure you have at least version 1.5.622 on your unit
  • Go to Apps -> Install Apps
  • Login if needed
  • Search for "iTemp" and install it
  • After the plugin is installed a new generic device will be installed

Generic-plugin.png

  • Go to the Advanced tab and locate the iTemp_Devices variable

Itemp variable.png

  • Fill in the Device #ID of the physical iTemp device, which you already included in the network
  • You can find the Device #ID by clicking on the wrench key on your physical MiMolite device and you will find it under Settings tab.

Device id.JPG

  • A new child device will be created which you can use in scenes and triggers

Binary device.png

Retrieved from "http://wiki.mios.com/index.php?title=ITemp&oldid=7786"
Personal tools