Revision as of 14:44, 12 April 2013

Under Construction

Device File(s) known to work with Everspring Sensors:

Device	Device File(s)
ST814 Temperature/Humidity Sensor
ST815 Illumination Sensor with LCD	D_ComboDevice1.xml

To set device parameters on Everspring devices:

In Vera's UI, click on the wrench for the device and select the 'Device Options' tab (see below).
Select 'Add configuration settings' and add your first parameter (you can add only those parameters that you want to set).
After you have added the parameter values that you want to set within Vera, select SAVE, and the refresh your browser.
Wake up the Everspring device (for example, on the ST815 Illumination Sensor, press the ESC/[L] button 3 times within 1.5 seconds). The device will stay awake for 10 seconds.
Select 'Configure node right now' on the device's 'Settings' tab within Vera.

Everspring ST815 Illumination Sensor with LCD
Parameter	Function	Size (Byte)	Value	Unit	Default Set (Factory Default)	Description
1	Basic Set Level	1 dec	0-99	Percent of Brightness (Dimmer Level)	99 (99)	Set basic set value to be on (or set Lux Level)/off. 0: Disable
2	Lux Trigger - On Value	2 dec	30-1000 or 0	LUX	300 (0)	Set Lux trigger-ON Value to be _Lux. 0: Clear Lux trigger-ON value
3	Lux Trigger - Off Value	2 dec	30-1000 or 0	LUX	500 (0)	Set Lux trigger-OFF Value to be _Lux. 0: Clear Lux trigger-OFF value
4	Lux Trigger - Off (Timer Value)	2 dec	1-480 or 0	Minute	240 (0)	Set Lux trigger-OFF Value to be _Lux. 0: Clear Lux trigger-OFF value
5	Auto Report (Time Interval)	2 dec	1-1439 or 0	Minutes	0 (0)	Set auto report time interval to be _mins.
6	Auto Report (Lux Interval)	2 dec	30-1000 or 0	LUX	0 (0)	Enable auto report. 0: Disable auto report.

@@ Line 22: / Line 22: @@
 | D_ComboDevice1.xml
 |}
-<br>
-<br>
-<h2> Including Everspring Devices </h2>
-<p>To include an Everspring
-</p>
 == Setting Device Parameters:  ==