Restart

Revision as of 21:49, 18 September 2012

HOWTO Restart your Vera

Prerequisites

• Vera hardware
• UI4 / UI5 firmware

Introduction

This is a short manual on how to restart your Vera gateway.

UI4 Instructions

UI5 Instructions

1. Go to Vera's Dashboard (Open your Web browser and type the IP address of your Vera, or connect through mios.com.)
2. In the UI, from the top menu select Setup>Net & Wifi.
3. Click the "Reboot" button.
4. The Vera unit will restart.

UI5 Advanced

Creating a Scene to restart Vera on a scheduled basis

1. Go to Vera's Dashboard (Open your Web browser and type the IP address of your Vera or connect through mios.com.)
2. From the top menu, select Automation>New Scene.
3. Enter a name for the Scene in the provided field.
4. From the top menu, select Schedules.
5. Click the "Add Schedule" button.
6. Enter a name for the schedule.
7. Define a schedule using the options provided and click the "Done" button.
8. From the top menu, select LUUP.
9. In the LUUP text box, enter the following:

os.execute( 'reboot' )

1. Click the "Save Lua" button.
2. At the Lua Code Updated confirmation, click the "Close" button.
3. Click the green "Confirm Changes" link.
4. Click the red "Save" link.
5. At the Save Data confirmation screen, click the "Continue" button.