Aeon HomeEnergyMonitor
| Line 8: | Line 8: | ||
US version: [http://wiki.micasaverde.com/images/f/f6/Home_Energy_Meter_V3_67_US.zip HEM367] | US version: [http://wiki.micasaverde.com/images/f/f6/Home_Energy_Meter_V3_67_US.zip HEM367] | ||
| + | |||
| + | AU version - 200 A: [http://wiki.micasaverde.com/images/4/45/Home_Energy_Meter_V3_67_AU_200A.zip HEM367] | ||
| + | |||
| + | EU version - 60 A : [http://wiki.micasaverde.com/images/3/37/Home_Energy_Meter_V3_67_EU_60A.zip HEM367] | ||
| + | |||
| + | EU version - 100 A: [http://wiki.micasaverde.com/images/2/2a/Home_Energy_Meter_V3_67_EU_100A.zip HEM367] | ||
| + | |||
| + | EU version - 200 A: [http://wiki.micasaverde.com/images/5/5e/Home_Energy_Meter_V3_67_EU_200A.zip HEM367] | ||
== Inclusion == | == Inclusion == | ||
Revision as of 10:52, 3 July 2012
If you have version 3.58 or later of the HEM firmware (unrelated to Vera's firmware), it supports the ability to report in real-time whenever there is a change in the energy consumption. It generates a report for Vera whenever there is a change.
For versions 3.57 and lower, the only way to get real time energy reporting was to have the HEM send Vera reports constantly, whether or not there was a change. This required powering the HEM with USB power. So we recommend using the USB port on the HEM to upgrade to firmware 3.58 or newer, as per the instructions on aeon-labs.com
There have been reported issues with HEM firmware less than 3.61. If you don't have 3.61, download these files:
US version: HEM361
US version: HEM367
AU version - 200 A: HEM367
EU version - 60 A : HEM367
EU version - 100 A: HEM367
EU version - 200 A: HEM367
Inclusion
When including the HEM to the Vera unit you should have the HEM powered with the USB AC adapter.
Note
You need to have it plugged in through the USB AC adapter for it to report the KWH accurately, because when it is battery operated it sleeps most of the time and it cannot accurately track KWH.
