View source for GE LED Settings

== '''HOWTO Control LED Settings of GE Switch/Outlets'''  ==

== Prerequisites  ==

*Vera hardware 
*GE Switch / Outlet 
*UI5 firmware

== Introduction  ==

This is a short manual on how to control the LED Settings of GE Switch/Outlets. 

== LED On when Switch/Outlet is On  ==

&nbsp; &nbsp;1. Go to Vera's Dashboard (Open your Web browser and type the IP address of your Vera, or connect through mios.com.) 

&nbsp; &nbsp;2. In the UI, Find the Switch/Outlet you want to modify and click the Wrench icon. 

&nbsp; &nbsp;3. At the Device Settings screen, click the Device Options Tab. 

&nbsp; &nbsp;4. At the Device Options screen, under Configuration Settings enter the following values: 
<pre>'3' in the Variable field 

'1 byte hex' from the Data Size drop down 

'1' in the Desired Value field</pre> 
&nbsp; &nbsp;5. Click the "Add Configuration Settings" Button. 

&nbsp; &nbsp;6. Close the Device Settings screen by clicking the X. 

&nbsp; &nbsp;7. Click the red "Save" button at the top of the UI. 

== LED On when Switch/Outlet is Off (Default Setting)  ==

&nbsp; &nbsp;1. Go to Vera's Dashboard (Open your Web browser and type the IP address of your Vera, or connect through mios.com.) 

&nbsp; &nbsp;2. In the UI, Find the Switch/Outlet you want to modify and click the Wrench icon. 

&nbsp; &nbsp;3. At the Device Settings screen, click the Device Options Tab. 

&nbsp; &nbsp;4. At the Device Options screen, under Configuration Settings enter the following values: 
<pre>'3' in the Variable field

'1 byte hex' from the Data Size drop down

'0' in the Desired Value field
</pre> 
&nbsp; &nbsp;5. Click the "Add Configuration Settings" Button. 

&nbsp; &nbsp;6. Close the Device Settings screen by clicking the X. 

&nbsp; &nbsp;7. Click the red "Save" button at the top of the UI. 

== References  ==

http://www.jascoproducts.com/support/manual-downloads/applications/DocumentLibraryManager/upload/45609-Manual-Eng.pdf 

[[Category:User_Instructions]] [[Category:How_To]]