View source for Networking Setup:Vera WiFi in Client Mode

If you allready have an wireless network adn you want to connect vera to it, you'll need to set Vera WiFi in Client mode. TO do that follow the following steps:
 Step1. Open Vera Web Admin page: http://findvera.com
 Step2. Go to Advanced -> Net&wi-fi
 Step3. Set:
             - Firewall to No Firewall (bridge)
             - Dhcp Server: off
        Press Save&Applay
 Step4. Go to Advanced -> Net&wi-fi -> Advanced Configurations
        If you haven't setup any users, login with root ( by default there is no password)
 Step5. Go to Network -> Wireless
 Step6. Wireless Adapter wl0 Configuration
         Set Radio to On and Channel to Auto
 Step7. Wireless Virtual Adaptor Configuration for Wireless Card wl0 
         Set Mode to Client
         Set ESSID, Encryption Type, according to your existing wireless network
 Step8. Press Save && Applay Changes